Thank you for shopping with GLT, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone s favourite way to spend their time, so we ve tried to make assembling this item as quick and painless as possible. Townhouse Wall Mounted Shelf - Large L4278 Hopefully our efforts will have been worthwhile and you ll sail through the whole process. ut if it all feels a bit too much like hard work, then we do have an assembly company we can recommend: the latpack onstruction ompany offers a nationwide service and can be contacted on 0843 289 4951 or www.flatpackconstruction.co.uk. few important pointers before you start: Please read the instructions right through before you start, and check that all the components have been included in the pack; we find separating all the hardware into piles makes it easier to be sure that everything is present and correct. Make sure you have the right tools. llen keys are provided if required, but screw drivers and other tools are not. You ll find details of the tools you need at the beginning of the instructions. It s a good idea to build the unit in the room where you are going to be using it, to avoid the need to move it after it s been assembled. o not throw away any packing materials until assembly is complete, just in case you accidentally discard smaller parts or hardware. ssembly ifficulty easy - medium - hard one-person job V1 04/05/2017 1
Safety Warnings: dult assembly required. Unassembled product contains small parts which may present a chocking hazard. hildren should be kept away from the product during assembly to avoid any possible risk of injury. O NOT use power tools in the assembly of this product as there is a risk of over-tightening and consequently splitting of the wood. heck fixtures and fittings regularly and tighten as necessary. Masonry wall fixings have been provided for use on solid brick and masonry. If mounting or fixing to another wall type then please use the appropriate fixings for the wall type. If in doubt, please seek professional advise. Maximum weight load 54kg. Maximum weight per shelf 18kg. o not overload. Please retain these instructions for future reference. ustomer Service: If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLT ustomer Services on 0344 848 6000 immediately. We do stock spare hardware packs at our warehouse, so we should be able to send you a replacement pack immediately if required. Product are: Wipe clean using a soft damp cloth followed by a dry cloth. o NOT use cleaning products which contain ammonia, solvents or abrasive material. o NOT expose the item to extremes of heat and humidity. ould we do better? If there is anything you think could be improved in these instructions or in the assembly of this product we d be grateful if you could let us know; we ll pass any helpful hints and tips on to other customers via our website and update the instructions. ll you need to do is drop us a line at instructions@gltc.co.uk Thank you 2
omponent heck List 1x Left Hand Side Panel 1x ase Shelf 8x am owels 35mmL 12x am Locks 14mm dia 2x Hinged am owels 4x Screws 18mmL 1x Mid Shelf 1x Right Hand Side Panel 8x Screws 16mmL 4x Wall ixings G 1x Right Hand Side Roof Panel H 1x Left Hand Side Roof Panel 8x Screws 15mmL 4x Metal Pins 16mmL #9 0 I 1x Lower ack Panel J 1x Mid ack Panel 4x Wall Plugs 38mmL You will need (not supplied) 4x Screws 40mmL 1x Top ack Panel 1x Top Shelf Phillips Head Screwdriver 3
Hardware for Step 1: Hardware for Step 3: x8 cam dowels x2 cam locks When assembled correctly a screw hole should be visible on back edge. This is essential to complete step 8. STP 1: ttach 4x cam dowels () into both side panels and. STP 3: ttach mid shelf () to left hand side panel () using 2x cam locks (). STP 2: ttach base shelf () to left hand side panel () using 2x cam locks (). Hardware for Step 2: STP 4: ttach right hand side panel () to mid shelf () and base shelf () using 4x cam locks (). Hardware for Step 4: x2 cam locks x4 cam locks When assembled correctly there should be recessed channel along the back edge of all faces. This is essential to complete step 8. 4
Hardware for Step 7: When assembled correctly there should be recessed channel along the back edge of all faces. This is essential to complete step 8. x4 18mmL screws STP 5: The lower stucture is now complete, please put this to one side. STP 6: Insert 2x cam () locks into the panel. Now Insert 2x hinged cam dowels () into the cam locks. Turn cam locks 90 degrees to secure hinged cam dowels into place. Hardware for Step 6: x4 cam locks x2 hinged cam dowels Push the hinged dowels so they bend at 90 degrees. Insert 2x cam locks () into the panel. Now insert the 2x hinge dowels () into the cam locks. Tighten the cam locks to secure hinged dowels into position, when tightening the cam locks please ensure panels and join with a flush fit. The roof structure is now complete. 5 STP 7: Now attach the assembled roof section to the side panels and using 4x screws ().
Hardware for Step 8: x8 16mmL screws x4 wall fixings STP 9: Insert 4x metal pins () into holes on the internal fasces of panel and. Now insert top shelf (J). The shelf should rest securely on the 4x metal pins. Hardware for Step 9: x4 metal pins x8 15mmL screws 4 4 4 4 I H J G STP 8: ttach lower back panel (G) to back of structure using 3x screws (). Now attach mid back panel (H) using 3x screws (). inally attach top back panel (I) using 2x screws (). Now attach 4x wall fixings to the back of the structure using 8x screws (), this will further secure the back panels to the structure as well. 6 The assembly is now complete. Masonry wall fixings have been provided for use on solid brick and masonry walls. If mounting or fixing to another wall type then please use the appropriate fixings for the wall type. If in doubt, please seek professional advice. opyright 2017 G.L.T.. Ltd. ll rights reserved. Great Little Trading ompany and GLT are registered trade marks of G.L.T.. Limited.