Easyclickpro radio-frequency system: intelligent and energy-efficient

Easyclickpro radio-frequency system: intelligent and energy-efficient

The Easyclickpro radio-frequency system. Unmatched versatility Easyclickpro & EnOcean 4 Easyclickpro radio-frequency system 6 Easyclickpro for multiple applications 8 Easyclickpro in office and purpose-built structures 10 Easyclickpro in residential buildings 11 Easyclickpro in senior living facilities 12

Easyclickpro in hotels The decentralised 13 radio-frequency system 14 The modular radio-frequency system 18 Solar motion detector 22 Easyclickpro for renovation 24 Control and visualisation 26

Easyclickpro & EnOcean: Less is more. Modern technology without cables, without batteries, without maintenance With Easyclickpro just the press of a finger is enough for the transmitters to produce an electrical impulse without any power source! This energy generates a radio signal on the interference-free 868 Mhz frequency, which can enable various electrical loads such as light sources, blinds, roller shutter motors, etc. The only requirement is that the loads need to be equipped with receivers. Extremely flexible installation Maintenance-free Reduces the risk of fire Safe investment Energy-saving Battery-free Cable-free Secure Timer switch Roller shutter Light control management Temperature indication 4

5

Easyclickpro radio-frequency system. The innovative Easyclick generation. Bidirectional ceiling receiver Bidirectional flush-mounted receiver with energy measurement Bidirectional flush-mounted receiver with support frame and energy measurement Adapter receiver with energy measurement Proven product offering Energy-efficient receivers Low power consumption (< 0.5 W) through optimised power supply and bi-stable relays. Energy consumption monitoring Integrated energy metering allows the recording of energy consumption of the connected consumer. Status feedback signal Secure and comfortable monitoring of connected equipment Integrated repeater Cost savings through integrated repeater functions in the receivers that are switched on as needed. Latest EnOcean standard By using the new EnOcean standard protocols, your investment is safe and future-proof. Bidirectional flush-mounted receiver Easyclickpro-comfort handheld transmitter 6

A new level of energy efficiency The bidirectional Easyclickpro flush-mounted/adaptor receiver not only receives radio signals, but sends back the status upon each status change. Real ON/OFF switching states can be visualised in this way on the Easyclickpro comfort handheld transmitter. In addition to the bidirectional features, the Easyclickpro receiver variants with integrated energy metering allow for the recording of energy values of the connected consumer. Benefits Energy-efficient receivers Energy consumption control by smart submetering Status feedback signal Without energy meter With energy meter Integrated repeaters for cost savings Compatibility with the latest EnOcean standard KEMA certified product safety D 451 FU-EBI O.T. Order Number: 00364316 D 451 FU-EBIM O.T. Order Number: 00366536 7

8

Easyclickpro for multiple applications. Always the right solution. Easyclickpro in office and purpose-built structures Easyclickpro in residential buildings Easyclickpro in senior living facilities Easyclickpro in hotels 9

Easyclickpro in office and purpose-built structures. Functionality and flexibility. Requirements Office and purpose-built buildings require one system for lighting, sun protection and heating which is reliable, energy-efficient and as maintenance-free as possible. In addition, the system should be flexible enough to allow for minor modifications in the event of any changes in space use. Ideally, this system should be compatible with the existing building automation system in order to maximize energy-savings. Solution Decentralised solutions with wall transmitters and flush-mounted receivers have the advantage that each receiver can be individually configured. The wireless wall transmitter only needs to be mounted using double-sided adhesive tape to the wall this is especially advantageous in offices with significant amounts of glass or when renovating or re-configuring rooms in an office building. The wireless transmitters are maintenance-free and compatible with many different building management systems that have an EnOcean interface. Benefits Wall-mounted transmitters are simply mounted in place using double-sided adhesive tape Battery and cable-free Maintenance-free Motion detector Functionality for more comfort and energy efficiency Compatible with many building automation systems from leading manufacturers Group/central and scenery functions possible Application example Handheld transmitter Meeting room Wall Office WC WC transmitter Wall transmitter Solar motion detector Solar motion detector Solar motion detector Techn. room Office RADIO GATEWAY Building systems technology e. g. PHC, CentraLine, KNX/EIB, LONWORKS,... Office Office Gateway Building systems technology Visualisation Wall transmitter Automation Internet Mobile phone & control 10

Easyclickpro in residential buildings. Increased level of comfort = lower costs. Requirements Requirements of a modern electrical installation still keep increasing. The aim is to increase comfort and safety by simultaneously lowering energy costs. Always with a view towards trouble-free installation, which keeps its functional range flexible for further modifications in the future. Solution Easyclickpro is a central radio-frequency solution perfect for use in residential buildings, in which the modules in the distribution system are radio-controlled by one or several antennas. With Easyclickpro you have optimum control of lighting, heating and blinds and avoid unnecessary energy consumption. Even central monitoring or control of the building is easy with Easyclickpro. Benefits Flexible postitioning of transmitters No switchboard cables in the walls Group/central functions Lighting scenes Time functions Mains cut-off possible Heating control Motion detectors Application example Wall transmitter Handheld transmitter Timer Window contact Temperature sensor Solar motion detector Techn. room Living room Dining room Bathroom DRD IP cameras Internet Mobile phone Corridor Kitchen Bidirectional receiving antenna Children Bedroom Gateway Visualisation Wired connection Radio-frequency 11

Easyclickpro in senior living facilities. Always on the safe side. Requirements Customised application solutions tailored to the needs of the staff and residents in senior facilities: Easy to operate, reliable, flexible positioning of the transmitter, easy retrofitting or upgrading. Solution Easyclickpro is a great choice in the nursing care sector because functions can be allocated to meet the requirements of the space in use. The ability to freely position and reposition the transmitters, e.g. near the bed, gives both the staff and the residents a sense of security. Whether automation or one-touch operation, and depending on the condition of the resident, the system can be adapted and checked by the staff using a visualisation tool. Benefits Transmitters are simply mounted onto a bed or wheelchair using double-sided adhesive tape Simple retrofitting Time functions Adjustable one button operation: UP/DOWN, brighter/darker No inductive radiation Motion detector, e.g. in bathroom Application example Wall transmitter Living room Handheld transmitter Solar motion detector Bathroom Window contact Solar motion detector Adapterreceiver Wall transmitter E Corridor Kitchen Automation Internet Mobile phone & control Bedroom Gateway Building systems technology 12

Easyclickpro in hotels. Energy-efficient heating controls. Requirements You should not leave the energy-efficient use of heating to the guests. Intelligent automation is essential in this area. In addition, the switching states in the rooms must be centrally monitored and controlled. Solution The interplay between the Easyclickpro window contact, hotel card switches, room temperature sensors and actuator components prevents energy losses. The heating is controlled using information with different priority levels within the receiver. All the switching states of the electrical loads can be visualised and monitored. Benefits Energy-optimised communication between Easyclickpro components Intelligent automation of the heating control unit Parameters can be quickly adjusted via visualisation Application example Actuator Window contact Living room Bathroom Window contact Room sensor Room sensor Hotel card switch Automation Internet Mobile phone & control Actuator Bidirectional receiving antenna DRD Gateway Building systems technology 13

14

Easyclickpro. The decentralised radio-frequency system. Unmatched versatility With the decentralised Easyclickpro radio-frequency system solution, individual receivers are assigned to the electrical loads. They have different selectable functions, which can be defined individually on the receiver without a PC or programming device. This learning is done without a PC or programming device directly on the receiver. The various models of Easyclickpro receivers and the timer functions within the handheld transmitter ensure optimum adaptation to structural circumstances and high levels of flexibilty. You should use these to your advantage! Radio-frequency wall transmitter Easyclickpro wall-mounted transmitters are simply mounted in place using double-sided adhesive tape Flush-mounted receiver Simple teaching and deletion of Easyclickpro transmitters using LRN and CLR keys. Ceiling receiver The ceiling receivers are pre-wired. This simplifies the ceiling assembly. Comfort handheld transmitter Easyclickpro handheld transmitter for the control of a complete building. 15

Easyclickpro receiver with a multitude of pre-programmed functions. 1 or 2 channel Easyclickpro receiver Targeted ON/OFF with 2 buttons Fan function Delayed activation ON/OFF with 1 button and selectable de-activation (OFF) delay Staircase light function with selectable de-activation time and 4 lighting situations save and OFF warning load at any time at the press of a button Automatic OFF after pre-selected time Fan controller with window monitor for open lighting units Pushbutton unit Activation (ON) as long as button is pressed Easyclickpro flush-mounted receiver for roller shutters and blinds UP/STOP/DOWN/Slat UP/STOP/DOWN/louver adjustment with 2 buttons adjustment with 4 buttons for Sun protection with adjustable simple operation motor run times pre-integrated Safety function via separate for future solutions radio transmitter (maintenance Sun protection ON/OFF via function) separate wall transmitter 4 position situations UP/DOWN save and load at any time at the press of a button 16

System upgrades for even more design flexibility. Flush-mounted receiver with support frame Use the flush-mounted receivers with support plates in conjunction with conventional key attachments for the local operation of your receiver! A radio transmitter is no longer necessary here this means cost savings with full functionality! Benefits Reasonably priced Comfortable, easy installation and programming Group/central and scenery functions possible Flexible upgrading with additional transmitters Replacing conventional switches with radio-frequency system The new flush-mounted receivers with support plates enable you to use a conventional button fixture for local operation instead of a radio transmitter. This saves costs! Also, the teaching of additional wall/handheld transmitters is even more convenient: Just remove the button fixture and adjust the settings! Of course, there are the new flush-mounted receivers with support plates and proven functionality for switching and for controlling roller shutters and blinds. Additonal radio-frequency transmitters The circuitry can be extended to include additional transmitters. 17

Easyclickpro as a modular radio-frequency system. The convenient installation with the Easyclickpro series built-in unit In contrast to decentralised installations with individual flush-mounted modules, the reception antennae in this central installation using Easyclickpro modules are located on the various levels, and pass on the transmitters radio signals to the Easyclickpro modules in the distribution system. The loads are controlled from there. 18

Bidirectional receiving antenna Switch Heating Switch Dim Roller shutter / Blinds control Voltage supply module BUS line SPV 230 V 19

A new radio-frequency era has begun with the Easyclickpro DIN-rail products. Quickly and safely installed The flexible and efficient installation directly in the electrical cabinet or distribution box enables clean and safe installation. On top of that, the pluggable data link really saves you time! Benefits Optimised antenna gain Immediately ready to function at the push of a button Fast installation This installation is easy click The Easyclickpro modules are simply connected to one another with an RJ45 connector. No screws are required - just a click is enough to make the connection. Easyclickpro easy to set programming mode 20

230 V Subdistribtion BUS line Wall transmitter Handheld transmitter Wired bidirectional receiving antenna Wall transmitter Room temperature sensor 230 V Distribtion Easyclickpro diagram of installation 21

22

Maintenance-free and energy-efficient lighting automation. Energy-efficient due to solar motion detectors Do you want to control the lighting automatically (for example in individual offices) or manually intervene by means of radio sensing devices? The solar motion detector and Easyclickpro radio sensing devices can also be re-positioned quickly for optimum use after being put into operation. Solar motion detection means there are new ways to increase the comfort of lighting systems and to adapt to the individual needs. You also save valuable energy. RADIO GATEWAY Bus systems Compatible with many building automation systems with EnOcean interfaces! For example PHC, PLS, KNX/EIB, LONWORKS etc. Benefits Requires no wiring installation Requires no batteries Requires no maintenance Compatible with many building automation systems with EnOcean interface Radio sensing devices/ wall transmitter Easyclickpro ceiling receiver Easyclickpro flush-mounted receiver Solar motion detector, ceiling-mounted Solar motion detector, wall-mounted 23

24 Easyclickpro radio-frequency system: For easy renovations on a budget.

Flexible installation The Easyclickpro wall transmitters are simply mounted using double-sided adhesive tape thanks to the battery and cable-free EnOcean technology! This offers you new freedoms in the interior design without time-consuming installation work and dirt! Easyclickpro wall transmitters can also be positioned on glass surfaces in seconds! Adjusting for each use of space A modified use of space frequently also entails a change in the button positions and functions. While a conventional installation results is an unpleasant and time-consuming installation effort, you can face projects with less apprehension with Easyclickpro. Retain or increase the value of special properties For a gentle and careful renovation, such as in high-quality old or heritage buildings, Easyclickpro meets all the requirements that are needed in these sensitive areas: without changing the core structural elements, you achieve a modern electrical installation, which could only be accomplished with significant investment as a conventional installation. Easyclickpro may be cheaper than you think! During renovation or modernisation of an electrical installation, you usually save additional money. Easyclickpro handheld transmitter Easyclickpro wall transmitter Easyclickpro adapter receiver Easyclickpro flush-mounted receiver 25

26

Control and visualisation. Convenience and safety at the highest level Easyclickpro makes it possible to monitor all rooms by radio by using software, a transmitter/receiver and a visualisation tool. This is how a variety of applications can be executed from anywhere! Keep it all under control The Easyclickpro radio-frequency system in connection with the innovative wibutler home server will automate many of the tasks associated with the building. Free wibutler app Easily automate and control the home Easyclickpro & 27

For more information www.peha.de For technical support Electrical products (switches, sockets) Telephone +49 (0) 2353 9118 222 technik_elektro-produkte@honeywell.com Electrical systems (lighting control and automation) Telephone +49 (0) 2353 9118 333 technik_elektro-systeme@honeywell.com PEHA Elektro GmbH & Co. KG a Honeywell Company Daimlerstraße 4 58553 Halver Germany Telephone +49 (0) 2353 9118 001 Telefax +49 (0) 2353 9118 311 peha@honeywell.com EP1034EN R0617 2017 Honeywell International Inc.