Technical Specification Atdec AWM Series Index Standard Product System Diagram Page 2 Heads AWM-HV VESA Head Dimensions Page 3 SNTB Notebook Holder Page 3 Arms AWM-A13 Overview Page 4 AWM-A46 Dimensions Page 5 AWM-A71 Adjustment on Posts Page 6 Adjustment on Wall Channels Page 7 Dynamic Arms AWM-AD Overview Page 8 AWM-LD Dimensions Page 9 Dimensions on Post Page 10 Adjustment on Posts Page 11 Adjustment on Wall Channels Page 12 Posts AWM-P13 AWM-P40 AWM-P75 Dimensions Page 13 Wall Channels AWM-W6 AWM-W35 Dimensions Page 14 Fixings AWM-FB Bolt Through Kit Dimensions Page 15 AWM-FC C Clamp Dimensions Page 15 AWM-FF F Clamp Dimensions Page 16 AWM-FH Heavy Duty F Clamp Dimensions Page 16 AWM-WS Slat Wall Adaptor Dimensions Page 17 Accessories APM01 Power Module Page 18 AC-MP Mini PC Mount Plate Page 18 AC-GC Grommet Clamp Page 18 Atdec AWM Series Page 1 of 18
STANDARD PRODUCT SYSTEM DIAGRAM 1. Any mounting surface must be capable of supporting the combined weight of all products, including attached screens and devices. 2. Ensure that your monitor solution is rated to support the combined weight of all products, including attached screens and devices. 3. All fixings are sold separately. HEADS Notebook Tray SNTB ARMS Dynamic Arm AWM-AD 130 Arm AWM-A13 460 Arm AWM-A46 710 Arm AWM-A71 INTERFACE LINKS Arm Base AWM-LB Arm Channel Clamp AWM-LC POSTS WALL CHANNELS 135 Post AWM-P13 400 Post AWM-P40 750 Post AWM-P75 60 Wall Channel AWM-W6 350 Wall Channel AWM-W35 FIXINGS Bolt Through Kit AWM-FB C Clamp AWM-FC F Clamp AWM-FF Heavy Duty F Clamp AWM-FH Grommet Clamp AC-GC Slat Wall Adaptor AWM-WS ACCESSORIES Power Module APM01 Mini PC Mount Plate AC-MP Atdec AWM Series Page 2 of 18
HEADS 1. All arms are supplied with the VESA Head - AWM-HV (unless specified otherwise) 2. Other accessories are sold separately. VESA Head AWM-HV Dimensions Ø4.5mm (0.18 ) 75mm (2.95 ) 40mm (1.57 ) 100mm (3.94 ) 115mm (4.53 ) 115mm (4.53 ) 4.5mm (0.18 ) Notebook Tray SNTB 1. Maximum weight load 8kg (17.6 lbs). 2. Ensure solution is rated to support combined weight of all products and attached screens/devices. 3. 10 years limited warranty. 4. For further details refer to the Notebook Tray - SNTB Technical Specifications document. Atdec AWM Series Page 3 of 18
ARMS OVERVIEW The rotation at the clamp can be reduced to 180 by using the rotation limiter ring. See product installation guide for instructions. 130 Arm AWM-A13 Pan Movement /180 Tilt Angle 45 25 Monitor Rotation Weight 0kg (0lbs) 12kg (26.4lbs) 460 Arm AWM-A46 Joint Movement /180 Joint Movement Pan Movement Tilt Angle 45 25 Monitor Rotation Weight 0kg (0lbs) 12kg (26.4lbs) 710 Arm AWM-A71 Joint Movement /180 Tilt Angle Joint Movement Pan Movement 45 25 Monitor Rotation Weight 0kg (0lbs) 9kg (20lbs) Atdec AWM Series Page 4 of 18
ARMS DIMENSIONS 130 Arm AWM-A13 Post Side Attachment Post Front Attachment Wall Channel 60mm (2.36 ) 128mm (5.04 ) 50mm (1.97 ) 78mm (3.07 ) 56mm (2.2 ) 78mm (3.07 ) 460 Arm AWM-A46 Post Side Attachment Post Front Attachment Wall Channel 60mm (2.36 ) 234mm (9.21 ) 56mm (2.2 ) 70mm (2.76 ). 458mm (18.03 ). 124mm (4.88 ) 160mm (6.30 ) 160mm (6.30 ). 448mm (17.63 ). 114mm (4.48 ) 50mm (1.97 ) 78mm (3.07 ) Note: Shown at minimum extension 710 Arm AWM-A71 Post Side Attachment Post Front Attachment 60mm (2.36 ) Wall Channel 359mm (14.13 ) 70mm (2.76 ). 708mm (27.87 ) 285mm (11.22 ). 698mm (27.48 ) 50mm (1.97 ) 56mm (2.2 ). 124mm (4.88 ) 285mm (11.22 ). 114mm (4.48 ) Note: Shown at minimum extension 78mm (3.07 ) Atdec AWM Series Page 5 of 18
ARMS HEIGHT ADJUSTMENT ON POSTS Measurements taken from centre of VESA mount. The C Clamp (AWM-FC) increases the minimum height by 26mm. 130 Arm AWM-A13 on Post 135 Post AWM-P13 400 Post AWM-P40 750 Post AWM-P75 HEIGHT 110mm (4.33 ) HEIGHT 163mm (6.42 ) RANGE 53mm (2.09 ) HEIGHT 110mm (4.33 ) HEIGHT 428mm (16.85 ) RANGE 318mm (12.52 ) HEIGHT 110mm (4.33 ) HEIGHT 778mm (30.63 ) RANGE 668mm (26.3 ) 460 Arm AWM-A46 on Post 135 Post AWM-P13 400 Post AWM-P40 750 Post AWM-P75 HEIGHT 233mm (9.17 ) HEIGHT 286mm (11.26 ) RANGE 53mm (2.09 ) HEIGHT 233mm (9.17 ) HEIGHT 551mm (21.69 ) RANGE 318mm (12.52 ) HEIGHT 233mm (9.17 ) HEIGHT 901mm (35.47 ) RANGE 668mm (26.3 ) 710 Arm AWM-A71 on Post 135 Post AWM-P13 400 Post AWM-P40 750 Post AWM-P75 HEIGHT 230mm (9.06 ) HEIGHT 283mm (11.14 ) RANGE 53mm (2.09 ) HEIGHT 230mm (9.06 ) HEIGHT 548mm (21.57 ) RANGE 318mm (12.52 ) HEIGHT 230mm (9.06 ) HEIGHT 898mm (35.35 ) RANGE 668mm (26.3 ) Atdec AWM Series Page 6 of 18
ARMS HEIGHT ADJUSTMENT ON WALL CHANNELS Measurements taken from bottom of wall channel to centre of VESA mount. 130 Arm AWM-A13 on Wall Channel 60 Wall Channel AWM-W6 350 Wall Channel AWM-W35 FIXED HEIGHT 92mm (3.62 ) HEIGHT 92mm (3.62 ) HEIGHT 382mm (15.04 ) RANGE 290mm (11.42 ) 460 Arm AWM-A46 on Wall Channel 60 Wall Channel AWM-W6 350 Wall Channel AWM-W35 FIXED HEIGHT 224mm (8.82 ) HEIGHT 224mm (8.82 ) HEIGHT 514mm (20.24 ) RANGE 290mm (11.42 ) 710 Arm AWM-A71 on Wall Channel 60 Wall Channel AWM-W6 350 Wall Channel AWM-W35 FIXED HEIGHT 221mm (8.7 ) HEIGHT 221mm (8.7 ) HEIGHT 511mm (20.12 ) RANGE 290mm (11.42 ) Atdec AWM Series Page 7 of 18
DYNAMIC ARMS OVERVIEW The rotation at the clamp can be reduced to 180 by using the rotation limiter ring. See product installation guide for instructions. Dynamic Arm AWM-AD with Channel Clamp AWM-LC Tilt Angle 45 40 180 Pan Angle 30 25 /180 180 Pan Angle Weight 0kg (0lbs) 9kg (20lbs) Dynamic Link AWM-LD with Channel Clamp AWM-LC /180 Tilt Angle 45 40 180 Pan Angle 25 30 Weight 180 Pan Angle 0kg (0lbs) 9kg (20lbs) Dynamic Arm AWM-AD with Arm Base AWM-LB Tilt Angle 45 40 30 180 Pan Angle 25 /180 180 Pan Angle Weight 0kg (0lbs) 9kg (20lbs) Atdec AWM Series Page 8 of 18
DYNAMIC ARMS DIMENSIONS Dynamic Arm AWM-AD with Channel Clamp AWM-LC 92mm (3.62 ) 275mm (10.83 ) 170mm (6.69 ) 34mm (1.34 ) 315mm (12.40 ) 197mm (7.76 ) 145mm (5.71 ) 286mm (11.26 ) 110mm (4.33 ) 82mm (3.23 ) 252mm (9.92 ) 330mm (13.0 ) 366mm (14.41 ) Dynamic Link AWM-LD with Channel Clamp AWM-LC 92mm (3.62 ) 275mm (10.83 ) 175mm (6.89 ) 80mm (3.15 ) 34mm (1.34 ) 170mm (6.69 ) 145mm (5.71 ) 315mm (12.40 ) 60mm (2.36 ) 286mm (11.26 ) 330mm (13.0 ) 366mm (14.41 ) Dynamic Arm AWM-AD with Arm Base AWM-LB 92mm (3.62 ) 275mm (10.83 ) 170mm (6.69 ) 34mm (1.34 ) 315mm (12.40 ) 197mm (7.76 ) 145mm (5.71 ) 286mm (11.26 ) 114mm (4.49 ) 48mm (1.89 ) 252mm (9.92 ) 330mm (13.0 ) 366mm (14.41 ) Atdec AWM Series Page 9 of 18
DYNAMIC ARMS DIMENSIONS ON POSTS & WALL CHANNELS Dynamic Arm AWM-AD with Channel Clamp AWM-LC Post - Side Channel Post - Front Channel 62mm (2.44 ) Wall Channel 62mm (2.44 ) 94mm (3.7 ) 90mm (3.54 ) 80mm (3.15 ) 618mm (24.33 ) 678mm (26.69 ) 668mm (26.3 ) 62mm (2.44 ) Dynamic Link AWM-LD with Channel Clamp AWM-LC Post - Side Channel Post - Front Channel Wall Channel 52mm (2.05 ) 366mm (14.41 ) 112mm (4.41 ) 426mm (16.77 ) 102mm (4.01 ) 416mm (16.38 ) 315mm (12.4 ) 56mm (2.44 ) 315mm (12.4 ) 315mm (12.4 ) Dynamic Arm AWM-AD with Arm Base AWM-LB 62mm (2.44 ) 67mm (2.64 ) 618mm (24.33 ) Atdec AWM Series Page 10 of 18
DYNAMIC ARMS HEIGHT ADJUSTMENT ON POST Measurements taken from centre of VESA mount. The C Clamp (AWM-FC) increases the minimum height by 26mm. Dynamic Arm AWM-AD with Channel Clamp AWM-LC 135 Post AWM-P13 400 Post AWM-P40 750 Post AWM-P75 HEIGHT HEIGHT RANGE 132mm (5.2 ) 500mm (19.68 ) 368mm (14.49 ) HEIGHT HEIGHT RANGE 132mm (5.2 ) 765mm (30.12 ) 633mm (24.92 ) HEIGHT HEIGHT RANGE 132mm (5.2 ) 1115mm (43.9 ) 983mm (38.7 ) Dynamic Link AWM-LD with Channel Clamp AWM-LC 135 Post AWM-P13 400 Post AWM-P40 750 Post AWM-P75 HEIGHT HEIGHT RANGE 58mm (2.28 ) 390mm (15.35 ) 332mm (13.07 ) HEIGHT HEIGHT RANGE 58mm (2.28 ) 655mm (25.79 ) 597mm (23.5 ) HEIGHT HEIGHT RANGE 58mm (2.28 ) 1005mm (39.57 ) 947mm (37.28 ) Atdec AWM Series Page 11 of 18
DYNAMIC ARMS HEIGHT ADJUSTMENT ON WALL CHANNEL Measurements taken from bottom of wall channel to centre of VESA mount. Dynamic Arm AWM-AD with Channel Clamp AWM-LC 60 Wall Channel AWM-W6 350 Wall Channel AWM-W35 HEIGHT HEIGHT RANGE 115mm (4.53 ) 430mm (16.93 ) 315mm (12.4 ) HEIGHT HEIGHT RANGE 115mm (4.53 ) 728mm (28.35 ) 613mm (23.82 ) Dynamic Link AWM-LD with Channel Clamp AWM-LC 60 Wall Channel AWM-W6 350 Wall Channel AWM-W35 HEIGHT HEIGHT RANGE 5mm (0.2 ) 320mm (12.6 ) 315mm (12.4 ) HEIGHT HEIGHT RANGE 5mm (0.2 ) 618mm (24.01 ) 613mm (23.82 ) Atdec AWM Series Page 12 of 18
POST DIMENSIONS Top View OPTIONAL Cable Cover 16mm (2.03 ) 20mm (0.79 ) 25.8mm (1.01 ) 51.5mm (2.03 ) 21.8mm (0.86 ) 43.5mm (1.17 ) 16mm (2.03 ) 135 Post AWM-P13 400 Post AWM-P40 750 Post AWM-P75 Channel 135mm (5.31 ) Total 141mm (5.55 ) Channel 400mm (15.75 ) Total 406mm (15.98 ) Channel 750mm (29.53 ) Total 756mm (29.76 ) Compatible Fixings: Bolt Through Kit C Clamp F Clamp HD F Clamp Grommet Clamp AWM-FB AWM-FC AWM-FF AWM-FH AC-GC Compatible Fixings: Bolt Through Kit C Clamp F Clamp HD F Clamp Grommet Clamp AWM-FB AWM-FC AWM-FF AWM-FH AC-GC Compatible Fixings: Bolt Through Kit HD F Clamp Grommet Clamp AWM-FB AWM-FH AC-GC Atdec AWM Series Page 13 of 18
WALL CHANNEL DIMENSIONS Top View 60mm (2.36 ) 16.5mm (0.65 ) 60 Wall Channel AWM-W6 350 Wall Channel AWM-W35 Channel 60mm (2.36 ) 40mm (1.57 ) Total 70mm (2.76 ) Channel 358mm (14.09 ) 145mm (5.71 ) Total 368mm (14.49 ) Countersunk Hole Internal Diameter Ø6.5mm (0.26 ) 145mm (5.71 ) 39mm (1.54 ) Countersunk Hole Internal Diameter Ø6.5mm (0.26 ) Atdec AWM Series Page 14 of 18
FIXINGS 1. Any mounting surface must be capable of supporting the combined weight of all products and attached screens/devices. 2. Ensure that your monitor solution is rated to support the combined weight of all products and attached screens/devices. 3. All fixings are sold separately. Bolt Through Kit AWM-FB Top View Arm Base (3 washer) Installation 53mm (2.09 ) 53mm (2.09 ) 14mm (0.55 ) 63mm (2.48 ) Post Installation 4mm (0.16 ) Worksurface Thickness POST ARM BASE 3mm (0.12 ) 53mm (2.09 ) 8mm (0.31 ) 0-33mm (0-1.3 ) 15-33mm (0.59-1.3 ) C Clamp AWM-FC Dimensions 96mm (3.78 ) 85mm (3.35 ) Worksurface Thickness 26mm (1 ) 85mm (3.35 ) 6mm (0.24 ) DEFAULT INVERTED 98mm (3.86 ) 24mm (0.94 ) 51mm (2 ) 25-33mm (0.98-1.3 ) 18-25.8mm (0.71-1.0 ) RANGE 18-33mm (0.71-1.3 ) Atdec AWM Series Page 15 of 18
F Clamp AWM-FF Dimensions 55mm (2.17 ) 82mm (3.23 ) 8mm (0.31 ) Inverted position lower clamp Worksurface Thickness DEFAULT INVERTED 96mm (3.78 ) 145mm (5.71 ) 15mm (0.59 ) 55mm (2.17 ) 0-36mm (0-1.42 ) 36-79mm (1.42-3.11 ) 66mm (2.6 ) RANGE 0-79mm (0-3.11 ) Heavy Duty F Clamp AWM-FH Dimensions 75mm (2.95 ) 90mm (3.54 ) 8mm (0.31 ) Worksurface Thickness TOP MIDDLE BOTTOM 118mm (4.65 ) 64mm (2.52 ) 112mm (4.41 ) 66mm (2.6 ) 0-38mm (0-1.5 ) 11-53mm (0.43-2.09 ) 25-68mm (0.98-2.68 ) RANGE 0-68mm (0-2.68 ) Atdec AWM Series Page 16 of 18
Slat Wall Adaptor AWM-WS with 60 Wall Channel AWM-W6 (sold separately) Dimensions 76mm (3 ) 34mm (1.34 ) 25.5mm (1 ) Slat Wall Groove Pitch 83mm (3.27 ) 40mm (1.57 ) 21.5mm (0.85 ) 7mm (0.27 ) PITCH 36mm (1.42 ) PITCH 78mm (3.07 ) Atdec AWM Series Page 17 of 18
ACCESSORIES Power Module APM01 1. The Power Module is compatible with all AWM fixings. 2. The Power Module is compatible with standard devices such as: - Apple iphone, ipad - Android devices - Samsung tablets - Blackberry devices - Windows devices - Most other common USB-compatible charging devices not listed here 3. 12 months limited warranty 4. For further details refer to the Power Module - APM01 Technical Specifications document. Mini PC Mount Plate AC-MP 1. Maximum weight load 5kg (11 lbs). 2. The Mini PC Mount Plate is compatible with all AWM Post and Wall Channel products. 3. The Mounting Plate can be placed at any height on the Post or Wall Channel as desired. 4. Compatible with Intel NUC devices and VESA 75x75mm and 100x100mm hole pattern compliant devices. 5. Slots allow mounting of NUCs with both 84 and 95mm mounting hole spacings. 6. Ensure solution is rated to support combined weight of all products and attached screens/devices. 7. 10 years limited warranty (parts and workmanship). 8. For further details refer to the Mini PC Mount Plate - AC-MP Technical Specifications document. Grommet Clamp AC-GC 1. The Grommet Clamp fixing is compatible with AWM Series Post and Base products. 2. Ensure the overall solution is rated to support the combined weight of all products and attached screens/devices. 3. For further details refer to the Grommet Clamp Technical Specifications document. atdec.com atdec.co.uk atdec.com.au No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. 20180706A Atdec AWM Series Page 18 of 18