WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES

EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES

EUROPEAN PRECISION & QUALITY With the TMX Made In Europe line, Toolmex continues its 45 year tradition of offering quality European workholding technology to the manufacturing industry. Featuring the precision, accuracy & reliability associated with European manufacturing, TMX Manual Workholding includes lathe chucks, collet chucks, centers & rotating bodies. Manual Chucks Set-Tru Scroll Chucks... 4 Scroll Chucks... 5 Front & Back Mount Scroll Chucks... 6 Type D1 Direct Mount Scroll Chucks... 7 Type A2 Direct Mount Scroll Chucks... 7 Extra Large Thru-Hole Scroll Chucks... 8 Independent Chucks... 8 Type A2 Direct Mount Independent Chucks... 9 Type D1 Direct Mount Independent Chucks... 10 Collet Chucks 5C & 16C Collet Chucks... 11 Live and Dead Centers Precision & Super Precision Live Centers... 12 Ultra Precision Adjustable Live Centers... 12 Bull Head Live Centers... 13 NC Quad-Bearing Live Centers... 13 Slim Casing Live Centers... 14 Live Centers with Interchangeable Inserts... 15 Dead Centers... 15 Rotating Bodies... 16 Also Available Large Oil Country Chucks... 17 Power Chucks... 18 VTL Chucks... 19 Rotary Table Packages... 19 2 EUROPEAN PRECISION & QUALITY

TMX Manual Lathe Chucks ENGINEERED & MANUFACTURED IN EUROPE TMX Chucks can handle rough as well as precision machining demands while extending the life of cutting tools and machine spindles due to the increased rigidity, accuracy and optimal wear behavior 2 Year Quality and Performance Warranty ISO Certified All chuck mounting sizes meet DIN standards Guaranteed to maintain exceptional accuracy for an extended period Bodies Chuck bodies are drop forged and hardened to 28 HRc 28 HRc is hard enough to wear longer but not brittle which eliminates stress cracks in critical areas Jaws 2-Piece Hard Reversible American Standard Tongue and Groove Jaws are made of high quality alloy steel then hardened to 50HC and ground Jaws hardened to 50 HRc Jaw teeth are softer than the rest of the jaw to allow for a slight flex which will extend the life of the master jaw Solid and soft top jaws also available Adapter Plates Adapters are made of steel and not heat treated delivering optimum functionality and performance Fully-finished to precisely fit TMX plain back chucks without a need for any additional machining See for the full offering of A, D, L, C and threaded taper plates Visit for backplate offering All forged steel bodies are hardened to 28 HRc providing extended durability and rigidity 2-Piece Hard Reversible American Standard Tongue and Groove Jaws are made of high quality alloy steel then hardened to 50HRc and ground High quality steel A, D, L and threaded backplates are fully finished to precisely fit TMX scroll & independent plain back chucks without the need for any additional machining EUROPEAN PRECISION & QUALITY 3

Set-Tru Scroll Chucks 3, 4 & 6-Jaw 0.0006" T.I.R. Repeatability with Fine Adjustment Fine adjustment with 4 micro adjustment screws for outstanding repeatability 16, 20 and 25 diameter chucks with 3-Jaws and 6-Jaws use 8 micro adjustment screws achieving extremely high gripping concentricity 2-Piece Hard Reversible American Standard Tongue and Groove Jaws Compatible with Rotary Table Packages (see page 19) Each Chuck Provided With 1 Set of Hard Master Jaws 1 Set of Reversible Hard Top Jaws 1 Chuck Wrench 1 Set of Fine Adjustment Screws 1 Set of Mounting Bolts Eyebolts for chucks 16 and larger # of Jaws 3 4 6 Hole DIa E RPMs Gripping Force (dan) Depth C Bolt Circle F H Jaw Jeight H1 5 3-866-0500P 1.378 5500 2400 15.1 2.165 0.591 4.252 2.835 1.575 6 3-866-0600P 1.654 4600 3100 29.3 3.386 0.709 5.512 3.484 1.732 8 3-866-0800P 2.165 4000 3700 49.6 4.331 0.787 6.929 3.898 1.772 10 3-866-1000P 2.992 3500 4600 80.9 5.709 0.787 8.819 4.291 2.051 12 3-866-1200P 4.055 2800 5500 137.8 7.087 0.787 11.260 4.665 2.244 16 3-866-1600P 5.354 2000 6500 222.2 11.781 0.866 6.752 5.118 2.638 20 3-866-2000P 7.480 1300 7200 395.6 16.030 1.181 9.252 6.299 3.150 25 3-866-2500P 9.921 1000 8000 715.6 16.030 1.181 13.000 6.890 3.425 6 3-847-0600P 1.654 4600 3100 29.3 3.386 0.709 5.512 3.484 1.732 8 3-847-0800P 2.165 4000 3700 49.6 4.331 0.787 6.929 3.898 1.772 10 3-847-1000P 2.992 3500 4600 80.9 5.709 0.787 8.819 4.291 2.051 12 3-847-1200P 4.055 2800 5500 137.8 7.087 0.787 11.260 4.665 2.244 16 3-847-1600P 5.354 2000 6500 222.2 11.781 0.866 6.752 5.118 2.638 5 3-868-0500P 1.378 3800 2400 15.1 2.165 0.591 4.252 2.835 1.575 6 3-868-0600P 1.654 3200 3100 29.3 3.386 0.709 5.512 3.484 1.732 8 3-868-0800P 2.165 2800 3700 49.6 4.331 0.787 6.929 3.898 1.772 10 3-868-1000P 2.992 2400 4600 80.9 5.709 0.787 8.819 4.291 2.051 12 3-868-1200P 4.055 1900 5500 137.8 7.087 0.787 11.260 4.665 2.244 16 3-868-1600P 5.354 1400 6500 222.2 11.781 0.866 6.752 5.118 2.638 20 3-868-2000P 7.480 900 7200 395.6 16.030 1.181 9.252 6.299 3.150 25 3-868-2500P 9.921 700 8000 715.6 16.030 1.181 13.000 6.890 3.425 4 EUROPEAN PRECISION & QUALITY

Scroll Chucks 2, 3 & 4-Jaw Self-Centering Each scroll chuck is statically balanced to ultra-high tolerance levels before assembly for longer life and higher accuracy All bearing surfaces are carefully machined at high tolerances and hardened to increase precision 3 and 4-Jaw Chucks come standard with 2-Piece Hard Reversible American Standard Tongue and Groove Jaws 2-Jaw Chucks come standard with 2-Piece Hard Master and Soft Top Jaws 3-831 Series 3-820 & 3-847 Series Each Chuck Provided With 3 & 4-Jaw Chucks 1 Set of Hard Master Jaws 1 Set of Reversible Hard Top Jaws 2-Jaw Chucks 1 Set of Hard Master Jaws 1 Set of Soft Top Jaws 1 Chuck Wrench 1 Set of Mounting Bolts Eyebolts for Chucks 16" and Larger # of Jaws 2 3 4 Jaw Type 2 Pc with Soft Top Jaws 2 Pc with Hard Top Jaws 2 Pc with Hard Top Jaws Hole E RPMs Gripping Force (dan) Depth C Bolt Circle F H Jaw H1 Hole Size S 6 3-831-0600P 1.654 4600 2400 22.2 4.921 0.158 5.512 2.539 1.693 6xM10 8 3-831-0800P 2.165 4000 2900 38.9 6.299 0.158 6.929 2.953 1.772 6xM10 10 3-831-1000P 2.992 3500 3600 64.4 7.874 0.197 8.819 3.347 2.087 6xM12 12 3-831-1200P 4.055 2800 4400 111.1 10.236 0.197 11.260 3.701 2.244 6xM16 16 3-831-1600P 5.354 2000 4900 188.9 12.992 0.197 14.252 4.134 2.638 6xM16 6 3-820-0600P 1.654 4600 3100 22.2 4.921 0.158 5.512 2.539 1.732 6xM10 8 3-820-0800P 2.165 4000 3700 38.9 6.299 0.158 6.929 2.953 1.772 6xM10 10 3-820-1000P 2.992 3500 4600 64.4 7.874 0.197 8.819 3.347 2.051 6xM12 12 3-820-1200P 4.055 2800 5500 111.1 10.236 0.197 11.260 3.701 2.244 6xM16 16 3-820-1600P 5.354 2000 6500 188.9 12.992 0.197 14.252 4.134 2.638 6xM16 20 3-820-2000P 7.480 1300 7200 322.2 16.535 0.197 18.032 4.724 3.150 6xM16 25 3-820-2500P 9.921 1000 8000 555.6 21.457 0.276 23.071 5.315 3.425 6xM16 5 3-841-0500P 1.260 5500 2400 11.1 3.740 0.158 4.252 2.205 1.575 3xM8 6 3-841-0600P 1.654 4600 3100 22.2 4.921 0.158 5.512 2.539 1.732 6xM10 8 3-841-0800P 2.165 4000 3700 38.9 6.299 0.158 6.929 2.953 1.772 6xM10 10 3-841-1000P 2.992 3500 4600 64.4 7.874 0.197 8.819 3.347 2.051 6xM12 12 3-841-1200P 4.055 2800 5500 111.1 10.236 0.197 11.260 3.701 2.244 6xM16 EUROPEAN PRECISION & QUALITY 5

Front & Back Mount Scroll Chucks 3 & 4-Jaw Self-Centering Can be mounted directly on 3/6 slot rotary tables or on a base plate when the rotary table has 3/6 or 4/8 T-slots Compatible with Rotary Table Packages (see page 19) Base plates are designed for use with all rotary tables and other devices where back mounting chucks cannot be used These chucks can also be mounted to a rough machined backplate, but will require machining of bolt hole patterns and projections for finished assembly 3-813 Series 2pc Jaws 3-813 Series Solid Jaws 3-814 Series 2pc Jaws Each Chuck Provided With 2-Piece Jaw Chucks 1 Set of Reversible Hard Master Jaws 1 Set of Revesible Hard Top Jaws Solid Jaw Chucks 1 Set Each Solid ID and OD Jaws 1 Chuck Wrench 1 Set of Mounting Bolts Eyebolts for chucks 16 and larger # of Jaws Jaw Type 3 Solid 3 2pc 4 2pc Hole E RPMs Gripping Force (dan) (lb) Depth C Bolt Circle F H Jaw H1/H2 Hole Size S 3 3-813-0301P 0.630 7000 1000 3.3 2.205 0.118 2.638 1.732 0.512 3xM6 3xM6 4 3-813-0401P 0.787 6300 1700 6.2 2.756 0.118 3.268 1.969 0.669 3xM8 3xM8 5 3-813-0501P 1.260 5500 2400 11.1 3.740 0.158 4.252 2.205 0.787 3xM8 3xM8 Bolt Size S1 6 3-813-0601P 1.654 4600 3100 22.2 4.921 0.158 5.512 2.539 1.299 3xM10 3xM10 8 3-813-0801P 2.165 4000 3700 38.9 6.299 0.158 6.929 2.953 1.142 3xM10 3xM10 10 3-813-1001P 2.992 3500 4600 64.4 7.874 0.197 8.819 3.347 1.339 3xM12 3xM12 5 3-813-0500P 1.260 5500 2400 11.1 3.740 0.158 4.252 2.205 1.575 3xM8 3xM8 6 3-813-0600P 1.654 4600 3100 22.2 4.921 0.158 5.512 2.539 1.732 6xM10 3xM10 8 3-813-0800P 2.165 4000 3700 38.9 6.299 0.158 6.929 2.953 1.772 6xM10 3xM10 10 3-813-1000P 2.992 3500 4600 64.4 7.874 0.197 8.819 3.347 2.051 6xM12 3xM12 12 3-813-1200P 4.055 2800 5500 111.1 10.236 0.197 11.260 3.701 2.244 6xM16 3xM16 16 3-813-1600P 5.354 2000 6500 188.9 12.992 0.197 14.252 4.134 2.638 6xM16 3xM16 20 3-813-2000P 7.480 1300 7200 322.2 16.535 0.197 18.032 4.724 3.150 6xM16 6xM16 25 3-813-2500P 9.921 1000 8000 555.6 21.457 0.276 23.071 5.315 3.425 6xM16 6xM16 6 3-814-0600P 1.654 4600 3100 22.2 4.921 0.158 5.512 2.539 1.732 6xM10 3xM10 8 3-814-0800P 2.165 4000 3700 38.9 6.299 0.158 6.929 2.953 1.772 6xM10 3xM10 10 3-814-1000P 2.992 3500 4600 64.4 7.874 0.197 8.819 3.347 2.051 6xM12 3xM12 12 3-814-1200P 4.055 2800 5500 111.1 10.236 0.197 11.260 3.701 2.244 6xM16 3xM16 16 3-814-1600P 5.354 2000 6500 188.9 12.992 0.197 14.252 4.134 2.638 6xM16 3xM16 20 3-814-2000P 7.480 1300 7200 322.2 16.535 0.197 18.032 4.724 3.150 6xM16 6xM16 6 EUROPEAN PRECISION & QUALITY

Type D1 Direct Mount Scroll Chucks 3-Jaw No Need for Machining - No Adapter Plate Required Comes standard with 2-Piece Hard Reversible American Standard Tongue and Groove Jaws Each Chuck Provided With 1 Set of Hard Master Jaws 1 Set of Reversible Hard Top Jaws 1 Chuck Wrench 1 Set of Camlock Studs 1 Set of Camlock Set Screws Eyebolts for chucks 16 and larger Taper Size Hole E RPMs Gripping Force (dan) Stud Circle F H Jaw H1 Camlock Studs Qty 8 D1-4 3-823-0834P 2.165 4000 3700 49.8 2.501 3.252 3.878 1.772 3 5/8 M10x1 8 D1-6 3-823-0836P 2.165 4000 3700 52 4.188 5.252 4.252 1.772 6 7/8 M16x1.5 10 D1-6 3-823-1036P 2.992 3500 4600 86 4.188 5.252 4.606 2.051 6 7/8 M16x1.5 10 D1-8 3-823-1038P 2.992 3500 4600 87.6 5.501 6.748 4.705 2.051 6 1 M20x1.5 12 D1-6 3-823-1236P 4.055 2800 5500 153.1 4.188 5.252 5.059 2.244 6 7/8 M16x1.5 12 D1-8 3-823-1238P 4.173 2800 5500 149.8 5.501 6.748 5.059 2.244 6 1 M20x1.5 12 D1-11 3-823-1239P 4.055 2800 5500 150.7 7.751 9.252 5.374 2.244 6 1-3/16 M22x1.5 16 D1-8 3-823-1638P 5.354 2000 6500 260.9 5.501 6.748 5.492 2.638 6 1 M20x1.5 16 D1-11 3-823-1639P 5.354 2000 6500 260.9 7.751 9.252 5.807 2.638 6 1-3/16 M22x1.5 20 D1-8 3-823-2038P 5.354 1300 7200 415 5.501 6.748 6.083 3.150 6 1 M20x1.5 20 D1-11 3-823-2039P 7.480 1300 7200 424.4 7.751 9.252 6.398 3.150 6 1-3/16 M22x1.5 25 D1-11 3-823-2539P 7.480 1000 8000 747.8 7.751 9.252 6.929 3.425 6 1-3/16 M22x1.5 Type A2 Direct Mount Scroll Chucks 3-Jaw No Need for Machining - No Adapter Plate Required Comes standard with 2-Piece Hard Reversible American Standard Tongue and Groove Jaws Each Chuck Provided With 1 Set of Hard Master Jaws 1 Set of Reversible Hard Top Jaws 1 Set of Mounting Bolts 1 Chuck Wrench Eyebolts for chucks 16 and larger Mount Hole E RPMs Bolt Circle F Bolt Circle F1 H Jaw L1 Hole S 16 A2-8 3-821-1628P 5.354 2000 4.370 5.501 6.748 5.374 2.638 6xM16 16 A2-11 3-821-1629P 5.354 2000 4.232 7.751 6.500 5.374 2.638 6xM20 20 A2-8 3-821-2028P 5.354 1300 7.417 5.501 6.748 5.965 3.150 6xM16 20 A2-11 3-821-2029P 7.480 1300 7.280 7.751 9.252 5.965 3.150 6xM20 25 A2-11 3-821-2529P 9.921 1000 12.980 7.751 9.252 6.732 3.425 6xM20 25 A2-15 3-821-2530P 7.480 1000 12.957 11.251 13.000 6.732 3.425 6xM24 Hole S1 EUROPEAN PRECISION & QUALITY 7

Extra Large Thru-Hole Scroll Chucks 3-Jaw Self-Centering Designed for pipe machining or pipe welding cut-off operations Front and Back Mount - Can be used on lathes, rotary tables and welding devices Each Chuck Provided With 1 Set of Hard Master Jaws 1 Set of Reversible Hard Top Jaws 1 Set of Soft Long Jaws 1 Chuck Wrench Eyebolt Hole E RPMs Gripping Force (dan) Depth C Bolt Circle F H Jaw H1 Hole Size S 16 3-819-1600P 8.661 1000 6500 144.4 lbs 14.252 0.2362 15 4.134 2.638 6xM12 6xM12 21 3-819-2000P 12.598 800 7200 266.7 lbs 18.189 0.315 18.957 4.488 3.150 6xM16 6xM16 Bolt Size S1 Independent Chucks 4-Jaw Plain Back Operating screws are hardened and ground Chucks 10" and larger have T-Slots Comes standard with 2-Piece Hard Reversible American Standard Tongue and Groove Jaws Each Chuck Provided With 2-Piece Jaw Chucks 1 Set of Reversible Hard Master Jaws 1 Set of Revesible Hard Top Jaws Solid Jaw Chucks 1 Set Each Solid ID and OD Jaws 1 Chuck Wrench 1 Set of Mounting Bolts Eyebolts for chucks 16 and larger 3-855 Series Solid Jaws 3-855 Series 2pc Jaws Jaw Type Hole E RPMs Depth C Bolt Circle F H Jaw H1/H2 5 Solid 3-855-0501P 1.0236 3500 10.7 2.748 0.098 2.126 1.693 0.787 4xM8 6 Solid 3-855-0601P 1.6535 3200 11.1 3.250 0.098 2.750 1.693 0.787 4xM10 8 2 Pc 3-855-0800P 1.9685 3060 37.8 4.331 0.197 3.252 2.854 1.827 4xM10 10 2 Pc 3-855-1000P 2.5591 2450 57.8 5.906 0.276 4.126 3.051 2.378 4xM12 12 2 Pc 3-855-1200P 3.1496 1940 106.7 6.890 0.276 5.252 3.425 2.398 4xM16 16 2 Pc 3-855-1600P 3.937 1530 188.9 7.874 0.394 6.748 3.622 2.847 4xM16 20 2 Pc 3-855-2000P 4.9213 1220 333.3 10.630 0.472 9.252 4.213 3.850 4xM20 25 2 Pc 3-855-2500P 6.2992 970 633.3 10.630 0.472 9.252 5.000 3.850 4xM20 Hole Size S 8 EUROPEAN PRECISION & QUALITY

Type A2 Direct Mount Independent Chucks 4-Jaw No Need for Machining - No Adapter Plate Required Chucks 10" and larger have T-Slots Comes standard with 2-Piece Hard Reversible American Standard Tongue and Groove Jaws Each Chuck Provided With 1 Set of Hard Master Jaws 1 Set of Reversible Hard Top Jaws 1 Set of Mounting Bolts 1 Chuck Wrench Eyebolts for chucks 16 and larger Mount Hole E RPM Bolt Circle F H Jaw H1 8 A2-6 3-856-0816P 1.969 3060 37.8 4.188 5.252 2.854 1.772 4xM12 10 A2-6 3-856-1016P 2.559 2450 57.8 4.188 5.252 3.051 2.051 4xM12 10 A2-8 3-856-1018P 2.559 2450 57.8 5.501 6.748 3.051 2.051 4xM16 12 A2-6 3-856-1216P 3.150 1940 106.7 4.188 5.252 3.425 2.244 8xM12 12 A2-8 3-856-1218P 3.150 1940 106.7 5.501 6.748 3.425 2.244 4xM16 16 A2-6 3-856-1616P 3.937 1530 188.9 4.188 5.252 3.622 2.638 8xM12 16 A2-8 3-856-1618P 3.937 1530 188.9 5.501 6.748 3.622 2.638 4xM16 16 A2-11 3-856-1619P 3.937 1530 188.9 7.751 9.252 3.622 2.638 4xM20 20 A2-8 3-856-2018P 4.921 1220 333.3 5.501 6.748 4.213 3.150 8xM16 20 A2-11 3-856-2019P 4.921 1220 333.3 7.751 9.252 4.213 3.150 8xM20 20 A2-15 3-856-2020P 4.921 1220 333.3 11.251 13.000 4.213 3.150 4xM24 25 A2-11 3-856-2519P 6.299 970 633.3 7.751 9.252 5.000 3.425 8xM20 25 A2-15 3-856-2520P 6.299 970 633.3 11.251 13.000 5.000 3.425 4xM24 Hole Size S EUROPEAN PRECISION & QUALITY 9

Type D1 Direct Mount Independent Chucks 4-Jaw No Need for Machining - No Adapter Plate Required Chucks 10" and larger have T-Slots Comes standard with 2-Piece Hard Reversible American Standard Tongue and Groove Jaws Each Chuck Provided With 1 Set of Hard Master Jaws 1 Set of Reversible Hard Top Jaws 1 Chuck Wrench 1 Set of Camlock Studs 1 Set of Camlock Set Screws Eyebolts for chucks 16 and larger Mount Hole E RPM Bolt Circle F H Jaw H1 Camlock Studs Qty 8 D1-3 3-857-0833P 1.969 37.8 3060 2.125 2.780 2.854 1.772 3 9/16 M10x1 8 D1-4 3-857-0834P 1.969 37.8 3060 2.501 3.252 2.854 1.772 3 5/8 M10x1 10 D1-6 3-857-1036P 2.559 57.8 2450 4.188 5.252 3.091 2.051 6 7/8 M16x1.5 12 D1-6 3-857-1236P 3.150 106.7 1940 4.188 5.252 3.425 2.244 6 7/8 M16x1.5 12 D1-8 3-857-1238P 3.150 106.7 1940 5.501 6.748 3.425 2.244 6 1 M20x1.5 16 D1-6 3-857-1636P 3.937 188.9 1530 4.188 5.252 3.622 2.638 6 7/8 M16x1.5 16 D1-8 3-857-1638P 3.937 188.9 1530 5.501 6.748 3.622 2.638 6 1 M20x1.5 16 D1-11 3-857-1639P 3.937 188.9 1530 7.751 9.252 3.622 2.638 6 1-3/16 M22x1.5 20 D1-8 3-857-2038P 4.921 333.3 1220 5.501 6.748 4.213 3.150 6 1 M20x1.5 20 D1-11 3-857-2039P 4.921 333.3 1220 7.751 9.252 4.213 3.150 6 1-3/16 M22x1.5 25 D1-8 3-857-2538P 6.299 633.3 970 5.501 6.748 5.000 3.425 6 1 M20x1.5 25 D1-11 3-857-2539P 6.299 633.3 970 7.751 9.252 5.000 3.425 6 1-3/16 M22x1.5 10 EUROPEAN PRECISION & QUALITY

5C & 16C Collet Chucks All forged steel bodies Tru- type features fixed collet position for fast and accurate workpiece changes. Set-Tru type offers fine adjustment with 4 micro-adjustment screws for outstanding repeatability TMX 5C and 16C collets available on Collet Size 5C 5 16C 6 Type RPM Depth C Bolt Circle F H Size G Bolt Size S Standard 3-862-0501P 9.92 6000 3.740 0.157 4.252 4.232 1.239"-20 3xM8x65 Tru- 3-862-0503P 11.46 6000 3.740 0.276 4.252 3.622 1.239"-20 3xM8x65 Set-Tru 3-862-0505P 11.91 6000 2.165 0.591 4.252 4.488 1.239"-20 3xM8x70 Tru- 3-862-0601P 20.50 6000 4.921 0.157 5.512 4.508 M47.5x1.75 3xM10x70 Set-Tru 3-862-0605P 24.03 6000 3.386 0.709 5.512 5.059 M47.5x1.75 3xM8x85 3-862-0501P 5C Standard 3-862-0503P 5C Tru- 3-862-0505P 5C Set-Tru 3-862-0601P 16C Tru- 3-862-0605P 16C Set-Tru EUROPEAN PRECISION & QUALITY 11

Precision & Super Precision Live Centers Each center hardened and ground from one single piece of forging Spindles are made of high quality alloy steel & heat treated to RC 60-62 3 precision high-quality bearings are protected by a special steel shield and neoprene seal Each bearing is specifically protected against dust and coolant Morse Taper Precision T.I.R. Super Precision T.I.R. Wt of Workpiece RPM max Wt Point A Overall L Point C 1 3-565-001 0.0003 3-565-101 0.0002 220 5000.64 1.50 0.59 4.07 0.70 1.97 2 3-565-002 0.0003 3-565-102 0.0001 460 5000 1.00 1.57 0.70 4.74 0.87 2.22 3 3-565-003 0.0003 3-565-103 0.0001 925 4000 2.13 2.20 0.98 6.14 1.12 2.95 4 3-565-004 0.0003 3-565-104 0.0001 1850 3000 3.85 2.52 1.10 7.24 1.24 3.21 5 3-565-005 0.0004 3-565-105 0.0002 4400 2500 8.37 3.35 1.61 9.33 1.77 4.23 6 3-565-006 0.0004 3-565-106 0.0002 7700 2000 26.43 5.12 2.48 13.13 2.52 5.96 Projection Ultra Precision Adjustable Live Centers Easy to adjust Adjustable, ultra precision radial bearing reduces run out to minimum after much use Heavy Duty Triple Bearing T.I.R. 0.00012 Morse Taper Wt of Workpiece lbs Thrust lbs at 1000 RPM RPM max Overall L Projection Point C 2 3-567-002P 220 90 8000 1.33 5.41 2.87 1.02 1.73 0.91 3 3-567-003P 440 170 6000 1.95 6.53 3.37 1.26 1.89 1.10 4 3-567-004P 880 350 4500 3.62 7.89 3.88 1.69 2.36 1.53 5 3-567-005P 1430 550 4000 7.17 9.80 4.70 2.01 2.76 1.77 Point A 6 3-567-006P 3080 1200 3000 17.20 12.64 5.47 2.44 3.70 2.40 12 EUROPEAN PRECISION & QUALITY

Bull Head Live Centers Centers are designed to hold pipe and hollow work Triple bearing design Three matched bearings are preloaded at the factory Good thrust and radial capabilities Bearings are protected by a special seal Head is made of high quality Alloy Steel and heat treated to RC 61-63 60 degree head angle Morse Taper T.I.R. RPM max of Workpiece Overall L Minimum Point A Projection Head C 1 3-575-010P 0.0003 5000 220 0.77 3.66 0.79 1.56 1.38 1.97 2 3-575-020P 0.0003 5000 400 1.32 4.11 1.18 1.6 1.38 2.36 2 3-575-021P 0.0003 4500 660 2.76 4.84 1.18 2.32 2.09 3.15 3 3-575-030P 0.0003 4500 770 2.98 5.51 1.18 2.32 2.09 3.15 3 3-575-031P 0.0003 3000 1210 5.07 5.83 1.57 2.64 2.4 3.93 4 3-575-040P 0.0003 3000 1320 5.62 6.73 1.57 2.7 2.4 3.93 4 3-575-042P 0.0004 3000 1540 11.00 7.09 2.76 3.05 2.76 5.51 5 3-575-051P 0.0008 2000 1653 17.60 8.15 3.94 3.05 2.76 6.69 6 3-575-060P 0.002 1000 4400 75.00 11.73 7.09 4.57 4.21 11.5 NC Quad-Bearing Live Centers Heavy duty High speed 7000 to 6000 RPM Morse Taper T.I.R. RPM max Wt of Workpiece lbs lbs Overall L Point A Projection Point C 4 3-566-004P 0.0002 7000 2200 5.50 8.62 1.10 4.58 1.91 2.76 5 3-566-005P 0.0002 6000 4400 11.00 11.00 1.57 5.87 2.64 3.47 EUROPEAN PRECISION & QUALITY 13

Slim Casing Live Centers For counter-clamping workpieces on turning and grinding machines Especially suited for cramped work area between center point and workpiece Enlarged work area and better workpiece accessibility thanks to narrow casing diameter imum rigidity at high speeds thanks to compact design imum concentricity deviation of 0.0002 in for maximum precision 3-560 Series Slim Casing 3-561 Series Extended Point Morse Taper Slim Casing. Workpiece RPM Overall L Point A Projection Point C D 2 3-560-002P 440 7000 0.7 4.961 0.591 2.441 0.709 1.260 3 3-560-003P 880 7000 0.9 5.630 0.591 2.441 0.709 1.339 4 3-560-004P 1760 6300 2.0 7.008 0.787 2.972 0.984 1.654 5 3-560-005P 3530 4300 5.5 9.154 1.181 4.055 1.339 2.284 6 3-560-006P 7720 3000 17.2 12.756 1.654 5.571 1.929 3.150 Slim Casing with Extended Center Point 2 3-561-002P 370 7000 0.7 5.394 0.591 2.874 1.142 1.260 3 3-561-003P 750 7000 0.9 6.142 0.591 2.953 1.221 1.221 4 3-561-004P 1540 6300 2.2 7.520 0.787 3.484 1.496 1.496 5 3-561-005P 3090 4300 5.7 9.843 1.181 4.744 2.028 2.028 6 3-561-006P 6610 3000 17.6 13.622 1.654 6.437 2.795 2.795 14 EUROPEAN PRECISION & QUALITY

Live Centers with Interchangeable Inserts of live centers and inserts are made of forgings, hardened and precisely ground Sets are provided with the main body and seven different style inserts Precision high quality bearings Special sealing ring protects the bearings from coolant and dust Inserts are easily interchangeable Visit for interchangeable inserts offering Morse Taper Set Only T.I.R. Wt of Workpiece lbs RPM without insert Overall L Projection L1 L2 d2 d3 2 3-570-002P 7-570-102 0.0008 220 5000 0.98 4.055 1.54 0.177 1.57 0.71 0.28 3 3-570-003P 7-570-103 0.0008 440 4000 2.02 5.217 2.03 0.197 2.20 0.98 0.47 4 3-570-004P 7-570-104 0.0008 880 3000 3.71 6.220 2.19 0.217 2.52 1.10 0.59 5 3-570-005P 7-570-105 0.0012 1770 2500 8.00 7.815 2.72 0.256 3.35 1.61 0.87 6 3-570-006P 7-570-106 0.0012 3550 2000 25.40 10.846 3.7 0.256 5.12 2.48 1.89 Dead Centers Carbide Tipped & Steel Designed for use whereever high accuracy is required T.I.R. ±0.0001in Case hardened to 61-63HRC Carbide Tipped Centers give longer tool life and require less regrinding 3-555 Series Ball Bearing Steel 3-550 Series Carbide Tipped Morse Taper Ball Bearing Steel Carbide Tipped Overall L Point E 1 3-555-005P 3-550-005P 3.15 0.48 0.28 0.13 2 3-555-010P 3-550-010P 3.94 0.71 0.28 0.44 3 3-555-015P 3-550-015P 4.92 0.95 0.43 0.66 4 3-555-020P 3-550-020P 6.30 1.24 0.55 1.50 5 3-555-025P 3-550-025P 7.87 1.76 0.71 4.00 6 3-555-030P 3-550-030P 10.63 2.51 0.74 11.50 EUROPEAN PRECISION & QUALITY 15

Rotating Bodies For Chucks & Interchangeable Heads Designed for using with interchangeable tapered heads or with 3", 4", and 5" front mounting, selfcentering chucks Steel body construction with hardened and ground scroll and pinions Hardened and ground MT shank Triple bearing design Sealed ball bearings, lubrication through roller Bodies, chucks and heads sold separately Rotating for 3-6 Chucks or Heads Rotating for 8"-10" Chucks or Heads Rotating Bodies for 3"-6" Chucks or Heads Chuck/Head Morse Taper Only T.I.R. RPM Workpiece Overall L D 3 2 3-573-032P 0.002 4000 1543 4.38 4.84 3.07 3 3 3-573-033P 0.002 4000 1543 2.40 5.52 3.07 4 3 3-573-043P 0.002 3500 2205 8.00 5.63 3.86 4 4 3-573-044P 0.002 3500 2205 7.90 6.54 3.86 5 3 3-573-053P 0.002 3200 3307 14.50 5.98 4.84 5 4 3-573-054P 0.002 3200 3307 15.30 6.89 4.84 5 5 3-573-055P 0.002 3200 3307 7.95 7.95 4.84 6 5 3-573-065P 0.002 3000 3900 16.50 8.07 6.30 Rotating Bodies for 8" -10" Chucks or Heads Chuck/ Head Morse Taper T.I.R. RPM Workpiece Wt Wt Point C Boss D1 Bolt Circle d2 Overall L1 Gage L2 Projection L3 8 5 3-573-085P 0.0008 2800 550 22.0 0.138 7.874 6.299 5.118 8.386 3.287 3.032 M10 10 6 3-573-106P 0.0008 2500 1100 48.5 0.177 9.843 7.874 6.299 11.378 4.291 3.858 M12 Hole Size M Compatible with Front Mount Scroll Chucks Interchangeable Tapered Heads available on 3-813 3-814 16 EUROPEAN PRECISION & QUALITY

ALSO AVAILABLE TMX Oil Country Chucks LARGE DIAMETER, EXTRA HEAVY DUTY TMX Oil Country Chucks are specifically designed for the rigorous use in the oil and gas industry. With 3-Jaw Scroll Chucks, 4-Jaw Independent Chucks, extra-large thru-holes and expanded sizes, TMX has a chuck available for any energy sector application. Made in Europe All Forged-Steel Bodies 2 Year Quality and Performance Warranty Heavy Duty Construction makes it a perfect fit for the high use, high demands seen in oil and gas operations High Gripping Force Extra Heavy Duty American Standard tongue and groove hard top Jaws and hard master jaws have fine serrated matching surfaces to expand total gripping area, maximize gripping force and help reduce workpiece slippage Exceptional Accuracy The high gripping power and the rigidity of the chuck body along with robust jaws contributes to superior accuracy and repeatability providing higher tolerances on workpieces and greater RPMs Available Options 3-Jaw Scroll and 4-Jaw Independent Chucks Plain Back and Direct Mount for A2 and D1 Spindles Large Bore (Thru-Hole) Options 16-40" inches standard with larger sizes upon request EUROPEAN PRECISION & QUALITY 17

ALSO AVAILABLE TMX Power Chucks Featuring the quality and precision associated with European manufacturing, TMX Power Chucks are direct, drop-in replacements for all major machine brands. All TMX Power Chucks are designed and engineered in the USA and are backed by a No Hassle, 2-Year Warranty. TMX also offers a full line of off the shelf accessories and supplies. ISO certified 2 Year Quality and Performance Warranty from Toolmex Direct Replacements for ALL major brands Interchangeable Top Tooling 1.5mm x 60 Serrations for chuck diameters up to 18 and 3mm x 60 Serrations for 21 and 24 chucks Durability Heat treatment is performed to alloy steel along with an improved lubrication system to obtain high accuracy, strength and durability High Gripping Force By increasing dynamic gripping force, work efficiency and safety have been greatly improved High Speed Strong gripping force, safety and performance are realized by optimal design resulting in higher rotational speeds Lightweight Equipment load has been reduced by weight reduction, increasing efficiency Interchangeable soft top & hard top jaws All moving parts are precisely machined High Quality Alloy Steel bodies for performance & accuracy Improved lubrication system for durability Direct A mount style fits ASA B5.9 Type A (interchangeable with DIN 55026) 18 EUROPEAN PRECISION & QUALITY

ALSO AVAILABLE TMX VTL Chucks VERTICAL TURNING LATHE CHUCKS Supplied with wipers, extra-long master jaws, and a center plug to prevent chips and contaminants entering the internal operation of the chuck, these chucks are available in both forged steel body manual and power (hydraulic) execution. Made in Europe Heavy Duty Steel Bodies Wiper Seals Extended Master Jaws for extra rigidity Center Plug seals out chips and containments Available in sizes from 25"-80" TMX Rotary Table Packages TMX Rotary Table Packages feature everything needed for rotary table operation in one convenient setup. With packages to fit all leading manufacturers tables, including Haas, Lyndex-Nikken, DMG Mori Seiki and ATS Systems, users will receive all components necessary for conversion without the worry of part compatibility or having to search multiple vendors. Rotary Table Packages include Chuck Mounting Adapter Bolts T-Nuts Image courtesy of Haas Automation, Inc. TMX designs and manufactures packages to specifically fit each Rotary Table model Each package includes a TMX Front-Mount or Set-Tru chuck (see pages 4 & 6) EUROPEAN PRECISION & QUALITY 19

About Toolmex Industrial Solutions Since 1973, Toolmex has been the leading provider and global supplier of European quality cutting tools, rotary tool holders and workholding to the industrial marketplace where precision, accuracy and performance matters. Our time proven quality and reliability lies in our history of European craftsmanship and engineering. Toolmex s European factories are ISO 9001 certified and manufactured to international standards. Our diversified product offering and service solutions support a wide network of distributors throughout North America, Central America and South America. With our North American headquarters based in Northborough, MA and Latin American operations located in Queretaro, Mexico, Toolmex consistently and efficiently meets the demands and aspirations of our customers. Distributed By 34 Talbot Road Northborough, MA 01532 Toll Free: 1-844-TMX-TOOL (1-844-869-8665) International: +1-508-653-8897 Fax: 508-653-5110 Email: support@toolmex.com www.toolmex.com 4-999-1804 2018 Toolmex Industrial Solutions