HDSP-311x, HDSP- 313x 1.16 mm (.4 inch) Single Digit General Purpose Seven Segment Display Data Sheet Description This 1.16 mm (.4 inch) LED single digit seven segment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. Applications Suitable for indoor use Not recommended for industrial application, i.e., operating temperature requirements exceeding +85 C or below -25 C [1] Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Avago sales office or an authorized distributor. Features Industry standard size Industry standard pinout 1.16 mm (.4 inch) character height DIP lead on 2.54 mm Choice of colors High Efficiency Red (HER), Green, AlGaAs Red, and Yellow Excellent appearance Evenly lighted segments gray package gives optimum contrast ± 5 ft. viewing angle Design flexibility Common anode right hand decimal point or common cathode right hand decimal point Categorized for luminous intensity Green and yellow categorized for color Devices HER Green AlGaAs Red Yellow Description Package Drawing HDSP-311E HDSP-311G HDSP-311A HDSP-311Y Common Anode Right Hand Decimal A HDSP-313E HDSP-313G HDSP-313A HDSP-313Y Common Cathode Right Hand Decimal B
Part Numbering System 582 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options [1] : No Mechanical Option Color Bin Options [1,2] : No Color Bin Limitation Maximum Intensity Bin [1,2] : No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2] : No Minimum Intensity Bin Limitation Device Configuration/Color [1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration [1] Refer to Respective Datasheet Package [1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2
Package Dimensions Package Drawing A FRONT VIEW TOP END VIEW PIN 1 + 8 5.51 (.22) COLOR BINNING (NOTE 3) COUNTRY OF ORIGIN.5 (.2) 18.75 (.738) 1.2 (.47) 1.16 (.4) HDSP-XXXX YWW XZ COO 2.54 x 6 (.1) 1.4 (.55) LUMINOUS INTENSITY CATEGORY 5.54 (.218) DATE CODE 4.1 (.161) SIDE VIEW 9.8 (.386) A.6 (.2) F G B E C 5.1 (.21).3 (.12) D DP 7.62 (.3) NOTE: NO PINS 4, 5, 6, AND 12 DIMENSIONS IN MILLIMETERS (INCHES) 3
Package Dimensions Package Drawing B FRONT VIEW RIGHT SIDE 1. 6. (.236).9 (.35) LUMINOUS INTENSITY CATEGORY COUNTRY OF ORIGIN COLOR BIN 2.54 ±.38 (.1) 1. (.394) 1.85 (.73) 12.8 ±.25 (.54) HDSP-XXXX YWW XZ COO 4 x 2.54 (.4) 1.2 (.47) 6.4 ±.25 (.252).5 ±.5 (.2) 7. ±.25 (.276) DATE CODE TOP SIDE 9.7 ±.25 (.382) 1.4 MIN. (.49) 3.9 (.153) F G A B.3 ±.5 (.12) E D C DP 7.62 ±.38 (.3) DIMENSIONS IN MILLIMETERS (INCHES) 4
Internal Circuit Diagram COMMON ANODE RIGHT HAND DECIMAL HDSP-311E/311G/311Y/311A 3.14 COM PIN No. 1 2 3 7 8 CONNECTION CATHODE A CATHODE F COMMON ANODE CATHODE E CATHODE D A B C D E F G DP 1 13 1 8 7 2 11 9 9 1 11 13 14 CATHODE DP CATHODE C CATHODE G CATHODE B COMMON ANODE PINS 4, 5, 6, 12: NO PIN COMMON CATHODE RIGHT HAND DECIMAL HDSP-313E/313G/313Y/313A 3.8 COM PIN NO. 1 2 3 4 5 CONNECTION ANODE G ANODE F COMMON CATHODE ANODE E ANODE D A B C D E F G DP 1 9 7 5 4 2 1 6 6 7 8 9 1 ANODE DP ANODE C COMMON CATHODE ANODE B ANODE A 5
Absolute Maximum Ratings at T A = 25 C Description HER HDSP-31xE Green HDSP-31xG AlGaAs Red HDSP-31xA Yellow HDSP-31xY Units Power Dissipation Segment 65 65 3 52 mw Forward Current Segment 25 [1] 25 [2] 15 [3] 2 [4] ma Peak Forward Current per Segment 1 1 8 8 ma (1/1 Duty Factor at 1 khz) Operating Temperature Range -35 to +85-35 to +85-35 to +85-35 to +85 C Storage Temperature Range -35 to +85-35 to +85-35 to +85-35 to +85 C Reverse Voltage per Segment or DP 5 5 5 5 V Wavesoldering Temperature for 3 Seconds (at 2 mm Distance from the Body) 25 25 25 25 C Note: 1. Derate above 25 C at.33 ma/ C. 2. Derate above 25 C at.33 ma/ C. 3. Derate above 25 C at.2 ma/ C. 4. Derate above 25 C at.27 ma/ C. Electrical/Optical Characteristics at T A = 25 C High Efficiency Red (HER) Device HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions 311E Luminous Intensity/Segment I V 1.49 mcd I F = 5 ma 313E 1.25 3.2 I F = 1 ma Forward Voltage V F 2.5 2.4 V I F = 2 ma Peak Wavelength PEAK 635 nm Dominant Wavelength d 62 nm Reverse Voltage V R 5 V I R = 1 A Green Device HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions 311G Luminous Intensity/Segment I V 1.25 3.2 mcd I F = 1 ma 313G Forward Voltage V F 2.6 V I F = 1 ma 1.8 2.25 2.6 I F = 2 ma Peak Wavelength PEAK 568 nm Dominant Wavelength d 573 nm Reverse Voltage V R 5 V I R = 1 A 6
AlGaAs Red Device HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions 311A Luminous Intensity/Segment I V 4.54 mcd I F = 5 ma 313A 3.2 7.5 I F = 1 ma Forward Voltage V F 1.85 2. V I F = 2 ma Peak Wavelength PEAK 66 nm Dominant Wavelength d 643 nm Reverse Voltage V R 5 V I R = 1 A Yellow Device HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions 311Y Luminous Intensity/Segment I V.86 mcd I F = 5 ma 313Y.8 1.5 I F = 1 ma Forward Voltage V F 2.15 2.6 V I F = 2 ma Peak Wavelength PEAK 595 nm Dominant Wavelength d 59 nm Reverse Voltage V R 5 V I R = 1 A Intensity Bin Limits (mcd at 1 ma) HER/Green Yellow AlGaAs Red Bin Name Min. [1] Max. [1] Min. [1] Max. [1] Min. [1] Max. [1] G NA NA.81 1.25 NA NA H 1.251 2. 1.251 2. NA NA I 2.1 3.2 2.1 3.2 NA NA J 3.21 5.5 NA NA 3.21 5.5 K NA NA NA NA 5.51 8. L NA NA NA NA 8.1 12.65 Note: 1. Tolerance for each bin limit is ± 1%. Color Bin Limits (nm at 1 ma) Dominant Wavelength (nm) Color Bin Min. Max. Green 3 569.1 571.1 4 571.1 573.1 5 573.1 585.5 Yellow 1 585.5 588.5 2 588.5 591.5 3 591.5 594.5 Note: 1. Tolerance for each bin limit is 1 nm. 7
High Efficiency Red (HER) MAXIMUM DC CURRENT PER SEGMENT ma 3 25 2 15 1 5 HIGH EFFICIENCY RED (HER) 2 4 6 8 1 T A AMBIENT TEMPERATURE C Figure 1. Maximum allowable average or DC current vs. ambient temperature. IF FORWARD CURRENT PER SEGMENT ma 12 1 8 6 4 2.5 1.5 2. 2.5 3. 3.5 V F FORWARD VOLTAGE V Figure 2. Forward current vs. forward voltage. RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 1 ma) 2.5 2. 1.5.5 5 1 15 2 25 3 35 I F FORWARD CURRENT FOR SEGMENT ma Figure 3. Relative luminous intensity vs. DC forward current. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 1 ma) 1.4 1.2.8.6.4.2 5 1 15 2 25 3 35 4 45 5 I PEAK PEAK FORWARD CURRENT PER SEGMENT ma Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. 8
Green MAXIMUM DC CURRENT PER SEGMENT ma 3 25 2 15 1 5 GAP GREEN 2 4 6 8 1 T A AMBIENT TEMPERATURE C Figure 5. Maximum allowable average or DC current vs. ambient temperature. IF FORWARD CURRENT PER SEGMENT ma 12 1 8 6 4 2.5 1.5 2. 2.5 3. 3.5 V F FORWARD VOLTAGE V Figure 6. Forward current vs. forward voltage. 3. 1.2 RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 1 ma) 2.5 2. 1.5.5 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 1 ma).8.6.4.2 5 1 15 2 25 3 35 I F FORWARD CURRENT FOR SEGMENT ma Figure 7. Relative luminous intensity vs. DC forward current. 5 1 15 2 25 3 35 4 45 5 I PEAK PEAK FORWARD CURRENT PER SEGMENT ma Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current. 9
AlGaAs Red MAXIMUM DC CURRENT PER SEGMENT ma 16 14 12 1 8 AIGaAs RED 6 4 2 2 4 6 8 1 T A AMBIENT TEMPERATURE C Figure 9. Maximum allowable average or DC current vs. ambient temperature. IF FORWARD CURRENT PER SEGMENT ma 12 1 8 6 4 2.5 1.5 2. 2.5 V F FORWARD VOLTAGE V Figure 1. Forward current vs. forward voltage. 3. 1.2 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 1 ma) 2.5 2. 1.5.5 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 1 ma).8.6.4.2 5 1 15 2 25 3 35 I F FORWARD CURRENT FOR SEGMENT ma Figure 11. Relative luminous intensity vs. DC forward current. 5 1 15 2 25 3 35 4 45 5 I PEAK PEAK FORWARD CURRENT PER SEGMENT ma Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current. 1
Yellow MAXIMUM DC CURRENT PER SEGMENT ma 25 2 15 1 5 YELLOW 2 4 6 8 1 TA AMBIENT TEMPERATURE C Figure 13. Maximum allowable average or DC current vs. ambient temperature. IF FORWARD CURRENT PER SEGMENT ma 12 1 8 6 4 2.5 1.5 2. 2.5 3. 3.5 V F FORWARD VOLTAGE V Figure 14. Forward current vs. forward voltage. RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 1 ma) 3.5 3. 2.5 2. 1.5.5 5 1 15 2 25 3 35 I F FORWARD CURRENT FOR SEGMENT ma Figure 15. Relative luminous intensity vs. DC forward current. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 1 ma) 1.4 1.2.8.6.4.2 5 1 15 2 25 3 35 4 45 5 I PEAK PEAK FORWARD CURRENT PER SEGMENT ma Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright 25-212 Avago Technologies. All rights reserved. Obsoletes 5988-2969EN AV2-3585EN - June 11, 212