How to use my add on to VirtuaGirl, Classics, DeskBabes, VirtuaGuyHD The VG-Clip Player This player is a first release to support VG, DB, and VGuy version 1.0.6.x and up. It is NOT a Replacement for Totem s Software. You MUST have Totem s Software instlled. Then all you need is to download the New Player and you are ready. Instructions are written for Totem s software version 1.0.8.2 If you OWN the Full Collection of all of your card Sets, you Can Skip to the OPTIONS section. This means you have NO CARDS On-Stage.. This section is required for anyone that DOESN T own the FULL COLLECTIONS of their card sets And have Cards On-Stage Unfortunately, the VG GUI has a built in feature to Play trailers from your ON-Stage screen when NO cards from your Collection are Active. This will interfere with how my Player works, since the VG GUI will play trailer clips at random. Here is the workaround to get past this You will have to pick one of your cards and sacrifice it.. Here I am going to use Card a0004 for example.. Open the Models Folder for the Card you are going to use. Select ALL of the.vghd and.demo files for that card. The Delete them
Make sure you leave one of these two files behind. ( one or both is OK ) That s it, you are ready to Set your VG Options OPTIONS SECTION First let s get the VGHD program set up to work with my Player. Right click on the V icon and select Options If you are not on the My Collection screen, select the My Collection TAB Make sure you ALL of your collections Checked and don t have any filters checked.. Deactivate all of your cards, so NO CARD has a check mark next to it. I just Click on the All on / off button - the card color will fade when they are ALL OFF. This Next Step is NEEDED if you had to Sacrifice one of your cards. if you HAVE the FULL card collections Skip this next Step..
Skip this step if you have the FULL Collection Now Click on the Card you Chose to Sacrifice In My Case it was Card a0004 And Make that Card Active ( put a check mark in the Activate Box ) Now you can close the VG GUI Now Make the V icon active or RED The V icon RED VG is waiting for a clip to be pushed to it to play.. (since you have deactivated all of your cards, VG GUI will not display any dances on it s own.) Now, if you don t already have my Player open go ahead and open it. ( The Player only updates the list of cards Each time you start it. So if you leave it open, and purchase new cards. They will not be included in it s card list. Close the player and re-start it to update the Card / Clip lists) It Takes a few Seconds to Scan your Collection and Display the Program screen. It starts out in it s shrunken mode.. Just move your mouse on to it, and it will expand. (any part below the Blue Title ) to relocate it click in the Blue Title bar and then Drag it to a new location..
Here is the Expanded View with a Clip Selected Select a Clip, Press the Play Selected Clip Button.. IMAGE CONTROLS: There are two Image controls.. The top section Displays the new.png image.. Uncheck the Box to Hide and Stop the.png image from displaying. The Size buttons will adjust the Size.. you can Left click and Drag the.png image anywhere you want. Right click on it will Hide it. The Card Image will be displayed in the Upper left Corner of the Screen for 2 seconds when you press the Play Selected Clip button. If you Don t want the card image to be displayed, remove the Check mark from the box.
At the top is a Pick a Card box. This will open the Card Selector drop down. Click on the Down Arrow, and now you can quickly scroll down to a card The first clip for that card will be the selected clip in the clip list..
The Clip Player will automatically shrink back down once you move the mouse away from it. This way you can enjoy the models dancing on your screen without a HUGE GUI in the way All you have to do is move your mouse back over to expand it again.. VG will buffer ONE clip in it s Que So while one clip is playing, you can select the next clip to play.. And press the play selected clip button to put it in the Que.. If you make More than ONE new selection and press the play Clip Button, only the Last one will end up in the Que. The One clip Que limit is a function of VG, not my Player.. For now, that concludes the instructions.. I do have plans to bring back all the features of my previous players.. I m waiting for the Final release of the VG software so I can finish the rest (as of this date, the new VG GUI does not provide for external activation of the VG screen saver. So the feature to use the screen saver from my Player no longer exists. ) I have asked the Totem Developers to put that function back into their software, so I can only wait and see I hope you enjoy using my software. Check back to my site to see if I have any updates to the program. and always My software is Free, but please consider making a Donation if you enjoy using it. www.deskbabes.net Support is VIA e-mail WyldAnimal@DeskBabes.net