Math and Music: Understanding Pitch

Similar documents
Musical Acoustics, C. Bertulani. Musical Acoustics. Lecture 13 Timbre / Tone quality I

Chapter 18. Superposition and Standing Waves

Music. Sound Part II

Lecture 7: Superposition and Fourier Theorem

Chapter 12. Preview. Objectives The Production of Sound Waves Frequency of Sound Waves The Doppler Effect. Section 1 Sound Waves

Sound is the human ear s perceived effect of pressure changes in the ambient air. Sound can be modeled as a function of time.

2. When is an overtone harmonic? a. never c. when it is an integer multiple of the fundamental frequency b. always d.

Copyright 2009 Pearson Education, Inc.

Acoustics and Fourier Transform Physics Advanced Physics Lab - Summer 2018 Don Heiman, Northeastern University, 1/12/2018

A mechanical wave is a disturbance which propagates through a medium with little or no net displacement of the particles of the medium.

Chapter 2. Meeting 2, Measures and Visualizations of Sounds and Signals

Music 171: Amplitude Modulation

THE PHENOMENON OF BEATS AND THEIR CAUSES

Musical Acoustics, C. Bertulani. Musical Acoustics. Lecture 14 Timbre / Tone quality II

Properties and Applications

Physical Consonance Law of Sound Waves

ABC Math Student Copy

Trigonometric functions and sound

SUMMARY. ) f s Shock wave Sonic boom UNIT. Waves transmit energy. Sound is a longitudinal mechanical wave. KEY CONCEPTS CHAPTER SUMMARY

Music: Sound that follows a regular pattern; a mixture of frequencies which have a clear mathematical relationship between them.

AUDITORY ILLUSIONS & LAB REPORT FORM

Sound Waves and Beats

Chapter 17 Waves in Two and Three Dimensions

= 2n! 1 " L n. = 2n! 1 # v. = 2n! 1 " v % v = m/s + ( m/s/ C)T. f 1. = 142 Hz

PHYSICS AND THE GUITAR JORDY NETZEL LAKEHEAD UNIVERSITY

CMPT 468: Frequency Modulation (FM) Synthesis

Date Period Name. Write the term that corresponds to the description. Use each term once. beat

Sound of Music. This lab is due at the end of the laboratory period

An introduction to physics of Sound

ALTERNATING CURRENT (AC)

Consonance vs. Dissonance - A Physical Description. BENJAMIN D. SUMMERS. (Louisiana State University, Baton Rouge, LA, 70803)

ACOUSTICS. Sounds are vibrations in the air, extremely small and fast fluctuations of airpressure.

Sound & Music. how musical notes are produced and perceived. calculate the frequency of the pitch produced by a string or pipe

Chapter 17. Linear Superposition and Interference

Waves ADD: Constructive Interference. Waves SUBTRACT: Destructive Interference. In Phase. Out of Phase

Chapter 14, Sound. 1. When a sine wave is used to represent a sound wave, the crest corresponds to:

Waves & Interference

constructive interference results when destructive interference results when two special interference patterns are the and the

Chapter 17. The Principle of Linear Superposition and Interference Phenomena

Waves ADD: Constructive Interference. Waves SUBTRACT: Destructive Interference. In Phase. Out of Phase

Spectrum. Additive Synthesis. Additive Synthesis Caveat. Music 270a: Modulation

MUS 302 ENGINEERING SECTION

Linear Frequency Modulation (FM) Chirp Signal. Chirp Signal cont. CMPT 468: Lecture 7 Frequency Modulation (FM) Synthesis

Music and Engineering: Just and Equal Temperament

Introduction. Physics 1CL WAVES AND SOUND FALL 2009

Chapter 16. Waves and Sound

Seeing Music, Hearing Waves

Chapter 16 Sound. Copyright 2009 Pearson Education, Inc.

Lab 10 The Harmonic Series, Scales, Tuning, and Cents

Preview. Sound Section 1. Section 1 Sound Waves. Section 2 Sound Intensity and Resonance. Section 3 Harmonics

Hohner Harmonica Tuner V5.0 Copyright Dirk's Projects, User Manual. Page 1

COM325 Computer Speech and Hearing

Frequency f determined by the source of vibration; related to pitch of sound. Period T time taken for one complete vibrational cycle

Physics 101. Lecture 21 Doppler Effect Loudness Human Hearing Interference of Sound Waves Reflection & Refraction of Sound

Standard Octaves and Sound Pressure. The superposition of several independent sound sources produces multifrequency noise: i=1

A-110 VCO. 1. Introduction. doepfer System A VCO A-110. Module A-110 (VCO) is a voltage-controlled oscillator.

Physics in Entertainment and the Arts

Section 1 Sound Waves. Chapter 12. Sound Waves. Copyright by Holt, Rinehart and Winston. All rights reserved.

Stay Tuned: Sound Waveform Models

Ch17. The Principle of Linear Superposition and Interference Phenomena. The Principle of Linear Superposition

Music 270a: Modulation

What is Sound? Part II

Physics 115 Lecture 13. Fourier Analysis February 22, 2018

THE PRINCIPLE OF LINEAR SUPERPOSITION AND INTERFERENCE PHENOMENA

Introduction to Equalization

Sound Waves and Beats

2. Experiment with your basic ring modulator by tuning the oscillators to see and hear the output change as the sound is modulated.

LCC for Guitar - Introduction

Chapter PREPTEST: SHM & WAVE PROPERTIES

COMP 546, Winter 2017 lecture 20 - sound 2

Sound Ch. 26 in your text book

Music 171: Sinusoids. Tamara Smyth, Department of Music, University of California, San Diego (UCSD) January 10, 2019

In Phase. Out of Phase

Lecture 19. Superposition, interference, standing waves

Test Review # 7. Physics R: Form TR7.17A. v C M = mach number M = C v = speed relative to the medium v sound C v sound = speed of sound in the medium

No Brain Too Small PHYSICS

Sound. Production of Sound

WAVES BEATS: INTERFERENCE IN TIME

SECTION A Waves and Sound

Complex Sounds. Reading: Yost Ch. 4

(3) A traveling wave transfers, but it does not transfer.

Physics 20 Lesson 31 Resonance and Sound

CMPT 368: Lecture 4 Amplitude Modulation (AM) Synthesis

Q15.9. Monday, May 2, Pearson Education, Inc.

Chapter 9: Wave Interactions

SECTION A Waves and Sound

Lecture PowerPoints. Chapter 12 Physics: Principles with Applications, 7 th edition Giancoli

Chapter 15 Supplement HPS. Harmonic Motion

Waves and Modes. Part I. Standing Waves. A. Modes

II. Tuning & Setup. Figure 1: This is where the guitar s open string s pitches really SOUND. Open 3rd String

Distortion products and the perceived pitch of harmonic complex tones

From Last Time Wave Properties. Description of a Wave. Water waves? Water waves occur on the surface. They are a kind of transverse wave.

Lecture PowerPoints. Chapter 12 Physics: Principles with Applications, 6 th edition Giancoli

Waves transfer energy NOT matter Two categories of waves Mechanical Waves require a medium (matter) to transfer wave energy Electromagnetic waves no

From Ladefoged EAP, p. 11

Chapter 7. Waves and Sound

Lab 7: Let s Make a Little Noise

Sound/Audio. Slides courtesy of Tay Vaughan Making Multimedia Work

Advanced Audiovisual Processing Expected Background

UNIVERSITY OF TORONTO Faculty of Arts and Science MOCK EXAMINATION PHY207H1S. Duration 3 hours NO AIDS ALLOWED

Transcription:

Math and Music: Understanding Pitch Gareth E. Roberts Department of Mathematics and Computer Science College of the Holy Cross Worcester, MA Topics in Mathematics: Math and Music MATH 110 Spring 2018 March 15, 2018 G. Roberts (Holy Cross) Undestanding Pitch Math and Music 1 / 16

Pitch Perception Pitch is perceived. It is a sensation like hot or cold. Recall that frequency is measured in Hz (cycles per second). When we hear a note produced by an instrument, we are actually processing many different frequencies at once, called partials. The pitch perceived by our ear is called the fundamental frequency. Suppose we hear a note with fundamental frequency 200 Hz. This does not necessarily mean we are receiving a sine wave that oscillates 200 cycles per second. The sound wave may not be perfectly periodic, e.g., a bell or drum, or the fundamental could be entirely absent from the sound wave. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 2 / 16

Residue Pitch Recall that frequencies in a 2:1 ratio are an octave apart. Experiment: What happens if we play two pure tones at 200 Hz and 400 Hz together? The perceived pitch depends on the relative amplitudes. If the amplitudes are the same, we hear the lower note as the primary pitch, 200 Hz. If we substantially decrease the amplitude of the 200 Hz tone, then the 400 Hz becomes the primary pitch. Experiment: What happens if we play 200, 400, 600, 800, and 1000 Hz tones simultaneously? Pitch perceived is still 200 Hz, but now the presence of the higher partials (integer multiples of the fundamental 200) begin to alter the character of the sound (its timbre). G. Roberts (Holy Cross) Undestanding Pitch Math and Music 3 / 16

Residue Pitch (cont.) Experiment: What happens if we play 400, 600, 800, and 1000 Hz tones simultaneously? Remarkably, the pitch perceived is 200 Hz, even though this frequency is not even present! We call 200 Hz the residue pitch, because it is what remains when the higher partials are combined together (Eric Heller, Why You Hear What You Hear, 2013). Experiment: What happens if we play 250, 300, 350, 400, 450, 500, and 550 Hz tones together? The perceived pitch is 50 Hz, two octaves below the note at 200 Hz! In each example, the residue pitch appears to be the greatest common divisor (GCD) of the set of frequencies. This is a good candidate for the frequency of the pitch perceived, but there are some exceptions (see text pp. 102 103). G. Roberts (Holy Cross) Undestanding Pitch Math and Music 4 / 16

Combining Sine Waves What happens mathematically when we add two sine waves together? Recall that for y = a sin(bt), the amplitude is a, the period is 2π/b, and the frequency is b/(2π). Figure: The graphs of the fundamental sine wave y = sin(2π 100t) (left), the first partial y = 0.9 sin(2π 200t) (center), and the sum of the two waves (right). Notice that the period of the sum of the two waves, 0.01, is the same as that of the fundamental. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 5 / 16

Combining Sine Waves (cont.) Combining the fundamental f = 100 with its first two partials 2f = 200 and 3f = 300. Figure: The graphs of the second partial y = 0.9 sin(2π 300t) (left), the sum of the fundamental and first partial (center), and the sum of the fundamental and its first two partials (right). Notice that the period of the sum of the three waves, 0.01, is the same as that of the fundamental. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 6 / 16

Graphical Explanation Behind Residue Pitch Removing the fundamental and first two partials does not effect the resulting period. Figure: The graphs of the first seven partials of a 100 Hz wave with the fundamental frequency removed (left), the fundamental and the first partial removed (center), and the fundamental and the first two partials removed (right). In each case, the remaining frequencies produce a residue pitch at 100 Hz, as can be seen by the period of 0.01 in each graph. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 7 / 16

The Overtone Series Why do different instruments playing the same pitch sound different to our ears? What causes the different character (timbre) of a sound? Why does an oboe sound different from a clarinet, even if they both are producing A440? Why do some combinations of pitches sound more consonant than others? Why does an octave sound stable and pleasing, while a tritone is unsettling? The answers involve the Overtone Series. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 8 / 16

The Overtone Series (cont.) The overtone series of a frequency f is simply the sequence of its consecutive integer multiples: f, 2f, 3f, 4f, 5f, 6f, 7f,.... Example: The overtone series for f = 100 Hz is 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000,.... The fundamental frequency is 100 Hz and the overtones (also called partials or harmonics) are 200 Hz, 300 Hz, 400 Hz, etc. When a note is played on an instrument, the higher-frequency partials are also produced. These do not effect the fundamental frequency of the resulting sound wave, but they do effect its timbre. Varying the strengths (the amplitudes) of the overtones creates different sounds. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 9 / 16

The Highly Consonant Octave Interval Consider the overtone series of both f = 100 Hz and 2f = 200 Hz: f : 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000,... 2f : 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000,.... The overtones in common are highlighted in red. Key Observation: All of the partials for 2f are also included in the overtone series for f. Since f and 2f have so many partials in common, playing them together leads to a very pleasing sound. This is why two notes an octave apart sound the same; the agreement of so many overtones helps create a resonance that is very satisfying to our brain. Note: This argument works regardless of the particular value of f ; it is the 2:1 ratio between notes that is important. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 10 / 16

The 3:2 Ratio Consider the overtone series of both f = 100 Hz and 3 2f = 150 Hz: f : 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200,.. 3 2f : 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500,.... Key Observation: Every other overtone of 3 2f agrees with every third partial of the original frequency f. This consonance is also quite pleasing to our ear. It results in the musical interval of a perfect fifth. General Rule: Combinations of pitches whose overtone series overlap tend to sound more consonant than those that do not (Hermann von Helmholtz (1821 1894)). Play example of overtone series on piano. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 11 / 16

Resonance When two objects vibrate at the same frequency, they are said to be in resonance. Resonance is very important in the study of acoustics. It serves to amplify sound so that it is more audible. Play tuning forks with amplifiers. Resonance can also be very dangerous. For example, if the frequency of walkers on a bridge match the natural frequency of the structure, it can oscillate wildly, even collapse! This is precisely what transpired on London s famous Millennium Bridge in 2000. Click Here for Video G. Roberts (Holy Cross) Undestanding Pitch Math and Music 12 / 16

Resonance in an Oscillator Consider a simple oscillating system such as a mass attached to a spring. Normally, without any forcing or friction present, the solution is a simple periodic sine wave. However, if the system is forced periodically with frequency equal to the natural frequency of the oscillator, then resonance occurs and the amplitude grows linearly. Figure: The graph of y = sin(2t) (dashed) versus y = t sin(2t) (solid), demonstrating the phenomenon of resonance. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 13 / 16

Beats What happens when two very close frequencies (not exact, but very close) are sounded simultaneously? Example: A440 and A441 Figure: The graphs of A440 (y = sin(880π t)), A441 (y = sin(882π t)), and their sum over the first four cycles. Notice that the graph of the sum appears to be A440 with twice the amplitude. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 14 / 16

Beats (cont.) Example: A440 and A441 At first, the sum of the waves appears to be A440 with twice the amplitude. But what happens over a longer time interval? Figure: The graph of y = sin(880π t) + sin(882π t) = 2 cos(π t) sin(881π t) (left) over 2 seconds. The graph appears to be solid because the frequency of the wave is 440.5 Hz, implying that it has 881 cycles in 2 seconds. Notice that in 1 second, the resulting wave changes in amplitude from a maximum of 2 to a minimum of 0 (at t = 0.5) and then back to a maximum of 2. The graph of the wave s envelope, y = ±2 cos(π t), is shown to the right, indicating one beat per second. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 15 / 16

Theorem (The Rule of Beats) Two pitches with close frequencies f and g Hz, with f > g, combine together to produce a pitch with the average frequency (f + g)/2 Hz, but they will beat at a frequency of f g Hz. Example: Two waves with frequencies 300 Hz and 306 Hz will produce a pitch with frequency 303 Hz, with 6 beats per second. Theorem follows from the trig identity (see pp. 110 111 in text for derivation) ( ) ( ) u + v u v sin u + sin v = 2 sin cos. 2 2 Example (cont.): Letting u = 600π t and v = 612π t, we obtain sin(600π t) + sin(612πt ) = 2 cos(6π t) sin(606π t). This is a wave with frequency 303 Hz and 6 beats per second. G. Roberts (Holy Cross) Undestanding Pitch Math and Music 16 / 16