Weslock-Molten Bronze Collection Entry Handle Features Meets ANSI A 156.2 Grade II lock standards Removable knobs/levers prevents scratching during installation Solid Molten Bronze 1 throw deadbolt with two hardened steel rollers -prevents sawing Emergency Egress function available. ENTRY HANDLES Castletown Wiltshire Stonebriar Tramore Entry Handle Specifications Adjustable Latches 2-3/8 or 2-3/4 with removable faceplates Adjusts to door thickness from 1-3/4 to 2 Optional door thickness from 2 to 2-1/4 Castletown Fits doors prepared with 2-1/8 top and 2-1/8 bottom cross holes & 1 edge hole 5-1/4 minimum center to center cross hole spacing Stonebriar/Wiltshire/Tramore Fits doors prepared with 1-5/8 or 2-1/8 top cross hole, 2-1/8 bottom cross hole and 1 edge hole 5-1/2 center to center cross hole spacing Entry Handle Warranty Deadbolt Features 1 throw deadbolt with two hardened steel rollers Heavy duty security strike with 3 screws Removable faceplates allow for radius or square latches (drive-in latch available) Deadbolt Specifications Adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 cross holes and 1 edge hole Adjusts to door thickness from 1-3/8 to 2 Optional door thickness from 2 to 2-1/4 Grade II design for extra strength and security Zinc die-cast cylinder with 5-pin tumbler security Deadbolt Warranty DEADBOLTS Round Premiere 03/08 American Building Supply, Inc. 1
Rosettes ABS-AMERICAN BUILDING SUPPLY, INC. Weslock-Molten Bronze Collection Knob & Lever Features Meets ANSI A 156.2 Grade II lock standards Removable knobs/levers prevents scratching during installation Panic-Proof Keylock/Privacy - one turn of interior knob/lever unlocks & opens door Push Button locking in rosette Solid Molten Bronze Levers, Knobs & Rosettes Dual spindles made of hardened steel offer bind free operation and easy alignment. Lever strength latch included with all lever products Knob & Lever Specifications Adjustable Latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 cross hole & 1 edge e hole Adjusts to door thickness from 1-3/8 to 1-3/4 Optional door thickness from 1-3/4 to 2-1/4 Grade II cylindrical design for extra strength and security Knob & Lever Warranty KNOBS, LEVERS & ROSETTES Wexford (F) Monoghan (N) Durham (M) Round Waterford (Q) Premiere Carlow (H) Sutton Black (2) Special Order Rust (R) Sandstone (H) 2 American Building Supply, Inc. 03/08
Entry Handle Features Solid Brass 1 throw deadbolt with two hardened steel rollers - prevents sawing Weslock Keyway standard (Optional Schlage Keyway) Removable knobs/levers prevents scratching during installation Emergency Egress function available Weslock-Elegance Collection ENTRY HANDLES Mansion TM Woodward I Stanford TM Woodward II Philbrook Entry Handle Specifications Adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 1-5/8 or 2-1/8 top cross hole, 2-1/8 bottom cross hole and 1 edge hole Adjusts to door thickness from 1-3/4 to 2 Optional door thickness from 2 to 2-1/4 5-1/2 center to center cross hole spacing Entry Handle Warranty Lifetime PVD Finish on exterior Polished Brass Deadbolt Features 5-Pin Cylinder 1 throw deadbolt with two hardened steel rollers - prevents sawing Heavy duty security strike with 3 screws Weslock Keyway standard (Optional Schlage Keyway) DEADBOLTS Premiere Oval Woodward Deadbolt Specifications Adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 cross holes and 1 edge hole Adjusts to door thickness from 1-3/8 to 2 Optional door thickness from 2 to 2-1/4 Grade II design for extra strength and security Deadbolt Warranty Lifetime PVD Finish on exterior Polished Brass 03/08 American Building Supply, Inc. 3
Weslock-Elegance Collection Knob & Lever Features Meets ANSI A 156.2 Grade II lock standards Removable knobs/levers prevents scratching during installation Panic-Proof Keylock/Privacy - one turn of interior knob/lever unlocks & opens door Push Button locking in rosette Zinc diecast levers and rosettes All brass knobs Dual spindles made of hardened steel offer bind free operation and easy alignment Lever strength latch included with all lever products KNOBS, LEVERS & ROSETTES S Impresa TM Knob Woodward (I) Impresa TM Knob Premiere (I) Julienne Knob Premiere ( J) Knob & Lever Specifications Adjustable Latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 cross hole & 1 edge hole Adjusts to door thickness from 1-3/8 to 1-3/4 Optional door thickness from 1-3/4 to 2-1/4 Grade II cylindrical design for extra strength and security. Julienne Knob Oval (J) Utica Lever Woodward (P) Legacy Lever Premiere (Y) Knob & Lever Warranty Legacy Lever Oval (Y) Bordeáu Lever Bordeáu Lever Premiere (U) Oval (U) Special Order PVD (B) Polished Brass (3) 4 American Building Supply, Inc. 03/08
Weslock-Traditionale ENTRY Collection HANDLES 2100 Series Entry Handle Features Solid Brass 1 throw deadbolt with two hardened steel rollers - prevents sawing 2100 Series Entry Handle Specifications Adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 Top and 2-1/8 Bottom cross holes and 1 edge hole Adjusts to door thickness from 1-3/8 to 1-3/4 5-1/4 minimum center to center cross hole spacing Optional door thickness 1-3/4 to 2-1/4 2100 Series Entry Handle Warranty Lifetime PVD Finish on exterior Polished Brass 1300 Series Entry Handle Features Solid Brass 1 throw deadbolt with two hardened steel rollers -prevents sawing Meets 2-point locking codes 1300 Series Entry Handle Specifications Non-adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 Top and 2-1/8 Bottom cross holes and 1 edge hole Adjusts to door thickness from 1-3/4 to 2-1/4 8 minimum center to center cross hole spacing Deadbolt Features Heavy duty security strike with 3 screws 1 throw deadbolt with two hardened steel rollers - prevents sawing ADA recommended, extra large interior thumbturn 1/4 Diameter Through Bolt (671/672 Models) Rotating Collar (671/672 Models) Heat treated assembly housing screws (671/672 Models) Anti-Force Shield (671/672 Models) Meets ANSI A 156.2 Grade II Cylindrical lock standards Deadbolt Specifications Adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 cross holes and 1 edge hole Adjusts to door thickness from 1-3/8 to 2 Optional door thickness from 2 to 2-1/4 LEXINGTON TM (2100 SERIES) DEADBOLTS MODEL 671 Antique Brass (A) PVD (B) Satin Chrome (D) Bright Chrome (6) LEXINGTON TM (1300 SERIES) COLONIAL TM (2100 SERIES) MODEL 672 Black (2) 03/08 American Building Supply, Inc. 5
Weslock-Traditionale Collection KNOBS & LEVERS BALL SAVANNAH TM IMPRESA TM ELEGANTI TM JULIENNE BORDEÁU TM LEGACY Knob & Lever Features Cylindrical Door Locks Meets ANSI A 156.2 Grade II lock standards Locksets have pre-installed installation screws, which are concealed behind a snap-on rosette Removable knobs/levers prevents scratching during installation Panic-Proof Keylock/Privacy- one turn of interior knob/lever unlocks & opens door Push Button locking in Rosette Zinc diecasted levers All brass knobs & rosettes Knob & Lever Specifications Adjustable Latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 cross hole & 1 edge hole Adjusts to door thickness from 1-3/4 to 2-1/4 ACCESS TM CALAIS TM Antique Brass (A) PVD (B) Polished Brass (3) Satin Chrome (D) Bright Chrome (6) Black (2) SPECIAL ORDER SPECIAL ORDER Warranty Limited Lifetime Mechanical Warranty Limited Lifetime Finish Warranty Lifetime PVD Finish on exterior Polished Brass 6 American Building Supply, Inc. 03/08
Weslock-Interconnected 1400 Series Entry Handle Features 1 throw deadbolt with two hardened steel rollers - prevents sawing Available with any interior Traditionale Collection knob or lever style Solid Brass Textured interior Nolin plate Weslock keyway standard Meets 2-point locking code LOCKSETS 1400 Series Entry Handle Specifications Non-adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 Top & 2-1/8 Bottom cross holes & 1 edge hole Adjusts to door thickness from 1-3/4 to 2-1/4 2-7/8 center to center cross hole spacing 1400 Series Warranty Lifetime PVD Finish on exterior Polished Brass 1500 Series Unigard TM Features 1 throw deadbolt with two hardened steel rollers - prevents sawing Panic-Proof - one turn of the interior knob/lever unlocks & opens the door Available with any interior Traditionale Collection knob or lever style Smooth interior Nolin plate (on 1530/1550 styles) Weslock keyway standard (optional Schlage keyway) LEXINGTON TM (1400 SERIES) (Exterior) COLONIAL TM (1400 SERIES) (Interior) 1500 Series Unigard TM Specifications Non-adjustable latches 2-3/8 or 2-3/4 with removable faceplates Fits doors prepared with 2-1/8 Top & 2-1/8 Bottom cross holes & 1 edge hole Adjusts to door thickness from 1-3/4 to 2-1/4 2-7/8 center to center cross hole spacing UNIGARD TM (1500 SERIES) 1500 Series Unigard TM Warranty Lifetime PVD Finish on exterior Polished Brass (Exterior) (Interior) UNIGARD TM (1500 SERIES) 03/08 American Building Supply, Inc. 7
Weslock-Interconnected LexingtonTM Finishes Antique Brass (A) PVD (B) ColonialTM Finishes Antique Brass (A) UnigardTM Finishes Antique Brass (A) PVD (B) Satin Chrome (D) 8 American Building ing Supply, Inc. 03/0808
Weslock - Accessories and Parts MOLTEN BRONZE SC12987XM - Interior keyed Schlage C keyway Black (2) SC14027XM - Handlesets Schlage C keyway Black (2) ELEGANCE SC12987 - Interior Keyed Schlage C keyway Polished Brass (3) SC14027 - Handlesets Keyed Schlage C keyway Polished Brass (3) LATCHES 12720 Adjustable Spring Latch 32720 Adjustable Lever Strength Spring Latch 12817 Adjustable Dead Bolt 12721 Adjustable Dead Latch 32721 Adjustable Lever Strength Dead Latch All fi nishes 03/08 American Building Supply, Inc. 9
THICK DOOR KITS ABS-AMERICAN BUILDING SUPPLY, INC. Weslock - Accessories and Parts 00700... 2-1/4 Kit F/Elegance Handle Sets 00710X... 2-1/4 Kit F/Elegance Deadbolts (Specify fi nish) 00715X... 2-1/4 Kit F/Elegance Interior Locks (Specify fi nish) 00900X... 2-1/4 Kit F/Castletown (Specify fi nish) 00905... 2-1/4 Kit F/Molten Bronze Handle Sets (Except Castletown, Tramore) 00910X... 2-1/4 Kit F/Molten Bronze Deadbolts (Specify fi nish) 00915X... 2-1/4 Kit F/Molten Bronze Interior Locks/Tramore (Specify fi nish) KEYING ITEMS 12344XBR... Weslock key blanks 13175X... Bottom pins specify size 0-9 13176X... Drive pins specify size 11-14 13177X... Master pins specify size 2-9 14111XPRO... Cylinder Plug retaining cap 00105... Plug Follower 00102... Key Gauge 001012... Keying Kit 001012 - Keying Kit 00105 - Plug Follower 00102 - Key Gauge 10 American Building Supply, Inc. 03/08
Weslock Molten Bronze Collection Weslock - Mounts WS9208 OPTION 1 Monoghan Lever, Premiere Rosette, Pewter Finish Waterford Lever, Premiere Rosette, Oil Rubbed Bronze Finish Carlow Lever, Premiere Rosette, Pewter Finish Durham Knob, Premiere Rosette, Pewter Finish WS9702 OPTION 1 Exterior Stonebriar Entry Lockset Pewter fi nish Interior Impresa Knob Pewter Finish Weslock Elegance Collection WS9208 OPTION 2 Impresa Knob, Premiere Rosette, Satin Nickel Finish Bordeau Lever, Oval Rosette, Oil Rubbed Bronze Finish Julienne Knob, Oval Rosette, Oil Rubbed Bronze Finish Utica Lever, Woodward Rosette, Satin Nickel Finish WS9702 OPTION 2 Exterior Woodward II Entry Lockset Oil Rubbed Bronze Finish Interior Impresa Knob Oil Rubbed Bronze Finish 03/08 American Building Supply, Inc. 11