COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current: 3 A/ minutes, 2 A/ hour) High resistance to vibration and shock Improved heat resistance and extended operation range Two contact gap options (FBR:.3 mm, FBR2:.6 mm) Three types of contact material ORDERING INFORMATION [Example] FBR N D2 W ** (a) (b) (c) (d) (e) (a) Series Name FBR : Standard type (contact gap.3 mm) FBR2 : Wider contact gap type (contact gap.6 mm) (b) Enclosure N : Plastic sealed type (c) Nominal Voltage D6 : 6 VDC D9 : 9 VDC D : VDC D2 : 2 VDC (d) Contact Material W : Silver-tin oxide indium (high power type) WL : Silver-tin oxide indium ( lamp loads, see applications table) (e) Custom Designation To be assigned custom specification 288
FBR, 2 SERIES SPECIFICATIONS Item W contact Specifications WL contact A rrangement form C (SPDT) form A (SPST) Material Silver-tin oxide indium (high power type) Silver-tin oxide indium V oltage Drop (Resistance) Maximum mv (at 2A 2 VD Contact Coil Time Value Life Rating Maximum Carrying Current Maximum Inrush (Reference) Current Max. Switching Current ( Reference) Min. Switching Load* (Reference) Operating Range Temperature 4 VDC 2 A (motor free load) 2 Watt lamp at 4 VDC 3 A/ minutes, 3 A/ hour (2 C, % rated coil voltage) A 8 A (lamp) 3 A 6 VDC 6 VDC A -4 C to +8 C (no frost) S torage Temperature Range -4 C to + C (no frost) Operate Release (at nominal voltage) (at nominal voltage) Maximum ms Maximum ms 6 Mechanical x operations minimum Electrical 2 x ops. min. 4 VDC 2 A Locked motor load V ibrations Resistance to Hz (double amplitude of.mm). x ops. min. Watts lamp, 4 VDC Other Shock Resistance Misoperation Endurance 2 m/ s 2, m/ s Weight Approximately 6g * Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operating environment. 2
FBR, 2 SERIES COIL DATA CHART. FBR Series W contact Model WL contact Nominal voltage Coil resistance (±%) (at 2 Must operate voltage Thermal resistance FBRND6-W FBRND6-WL 6 VDC 3.6 VDC (at 2 4. VDC (at 8 FBRND9-W FBRND-W FBRND9-WL FBRND-WL 9 VDC 3 VDC 8.4VDC (at 2 6.8 VDC (at 8 6.3 VDC (at 2 7.9 VDC (at 8 73 C/W FBRND2-W FBRND2-WL 2 VDC 24 7.3 VDC (at 2 9.2 VDC (at 8 2. FBR2 Series MODEL W contact Nominal voltage Coil Must operate resistance voltage (±%) (at 2 Thermal resistance FBR2ND6-W 6 VDC 4 Ω FBR2ND9-W 9 VDC Ω FBR2ND-W VDC 3 Ω FBR2ND2-W 2 VDC 8 Ω 3.6 VDC (at 2 4. VDC (at 8.4 VDC (at 2 6.8 VDC (at 8 6.3 VDC (at 2 7.9 VDC (at 8 7.3 VDC (at 2 9.2 VDC (at 8 6 C/W 3
FBR, 2 SERIES SUITABLE APPLICATIONS Application Normal load current (2 VDC system) Description Recommended model (example) For 6 V or less For instantaneous motor load voltage 2 V or more load voltage Power Windows Automatic Door Lock 2 to 2 A forward and reverse FBRN -W FBR2N -W 8 to 2 A forward and reverse FBRN -W FBR2N -W Tilt-Lock Wheel Sunroof Adjustable Door Mirror Automatic Antenna 2 A forward and reverse 2 to 3 A forward and reverse 3 to A forward and reverse 8 to 2 A (INRUSH) forward and reverse break 2 A maximum (motor-free) motor control FBRN -W FBR2N -W FBRN -W FBR2N -W FBRN -W FBRN -W Auto-Cruise 2 to 3 A power shutoff and solenoid FBRN -W Lamp loads 2 Watts for up to K operations FBRN -WL Others Car Audio System, etc. FBRN -W For the load condition where higher voltage would be encountered during contact break, FBR2 series with wider contact gap is recommended. CHARACTERISTIC DATA. MAXIMUM BREAK CAPACITY 2. LIFE Contact switching current (A) 4 3 3 2 Locked motor 2 load FBR FBR2 2 Resistive load FBR FBR2 2 Number of operations (x 4 )3 4 VDC Motor locked load High power type ( W) 2 2 3 34 Voltage between contacts (VD 2 2 3 3 4 Locked motor current (A) 4
FBR, 2 SERIES 3. LIFE TEST (EXAMPLE) Test item 4 V DC-2 A motor lock 2, operations minimum (FBR2 -W type) Test circuit RL- RL-2 M Shift of pick-up drop-out voltage Percent of rated coil voltage (%) 8 PICK-UP 4 DROP-OUT 2 Initial Shift of contact resistance Current wave form (RL-) 2 A A (RL-2) 2 A A.3 sec sec 2 sec.3 sec Contact Resistance (mω) Break Make (measured at 6 V- A) Initial Number of operations (x 4 ) Test item 4 V DC-2 A Motor lock 2, operations minimum (FBR -W type) Test circuit Current wave form (RL-) 2 A A (RL-2) 2 A A.3 sec sec RL- RL-2 2 sec M.3 sec Shift of pick-up and drop-out voltage % of rated coil voltage 8 4 2 Shift of contact resistance Contact resistance PICK-UP DROP-OUT Break Make No. of operations (x 4 ) No. of operations (x 4 ) (measured at 6 V- A)
FBR, 2 SERIES Test item 4 V DC-8 A (2W) lamp load, operations minimum (FBR -WL type) Test circuit Shift of pick-up drop-out voltage 8 PICK-UP 4 DROP-OUT 2 Percent of rated coil voltage (%) Initial 2 Number of operations (x 4 ) Shift of contact resistance Current wave form 8 A A A Contact Resistance (mω) Initial 2 Number of operations (x 4 ) 4. COIL TEMPERATURE RISE. OPERATING COIL VOLATGE RANGE (EXAMPLE) [ FBRND9- ] [ FBRND2- ] 2 ( Coil temperature rise 8 4 2.8 W.6 W (3) carrying current : 2 A applied coil power (2) carrying current : A applied coil power.8 W.6 W.8 W.6 W ()carrying current : A applied coil power at 2 C Applied voltage to the coil (V) CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE NOTE : Intermittent coil operation is required in this region at 2 A or more carrying current. Applied voltage to the coil (V) NOTE : Intermittent coil operation is required in this region at 2 A or more carrying current. CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE 2 3 Applied time (minutes) 3 Operating temperature ( 3 Operating temperature ( 6
sæ FBR, 2 SERIES 6. VIBRATION RESISTANCE CHARACTERISTICS Dual amplitude (mm) (m/s 2 )... Frequency : ~2 Hz Acceleration : m/s 2 max Automotive Direction of vibration : see under diagram electronics standard Detection level : chatter > 44 m/s 2 Range where chattering occurs contact coil not energized on X-direction Z FBR Acceleration 2 Frequency (Hz) Y X 7. SHOCK RESISTANCE CHARACTERISTICS Distribution (%) (m/s 2 ), Shock level 8 4 2 REFERENCE DATA Distribution of operate and release voltage 8 4 2 FBR2 n = X X2 Y Y2 Z Z2 Operate Release Shock direction Distribution (%) : contact (coil de-energized) : Contact (coil energized) Distribution of operate and release time FBR2 n = 8 Operate Release 4 2 Shock application time : ms, half-sine wave Test material : coil, energized and de-energized Shock direction : set under diagram Detection level : chatter > s Distribution (%) Z2 Z Y2 FBR Y X2 X Distribution of contact resistance FBR2 n = 8 4 2 2 3 4 7 8 Nominal voltage multiplying factor (%) 2 3 4 6 7 8 Time (ms) 2 3 4 7 8 Contact resistance (mω) 7
FBR, 2 SERIES DIMENSIONS Dimensions. +.2 PC board mounting hole layout (BOTTOM VIEW) 4-ø.3 ND2-W F&T 9427 2. +.2 R.4 ø.4 R.4 2..2 3.7 +.3 Schematics (BOTTOM VIEW) (-*).3 (.6) t =.3 2..2 t =.4 3. (.).2 COM (+*) Tube carrier 9. Max. Max. 2.3 Max. *: FBR-WL has polarity 4 pcs/tube Unit : mm Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-, Higashigotanda 2-chome, Shinagawa-ku Tokyo 4, Japan Tel: (8-3) 449-7 Fax: (8-3) 449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 2 E. Caribbean Drive Sunnyvale, CA 9489 U.S.A. Tel: (-48) 74-49 Fax: (-48) 74-497 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 2 232 WV Hoofddorp Netherlands Tel: (3-23) 9 Fax: (3-23) 9 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 2E Pasir Panjang Road #4- Citilink Warehouse Complex Singapore 829 Tel: (6) 637-8 Fax: (6) 6273-32 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com 2 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 6/7/2. 8