SMD Common Mode Filter for Signal Line. PRODUCT IDENTIFICATION 2012 F P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS

Similar documents
IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS

ICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805

SMT Ferrite Chip Inductor SFI201212S Series

ITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :

MTBF PREDICTION REPORT

MCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors

Wire Wound Chip Inductors LPI0805FT Series

FrelTec GmbH. Multilayer Ferrite Chip Inductor SMD

Shur-Plug*.156 Diameter Terminals and Receptacle Contacts

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1

AMCA R450G-S1F-T3 Pb

antenna antenna (4.139)

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1

INPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions

Instruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A

SMD Common Mode Choke CUWI Series. CUWI Series For HDMI, USB 3.0. Product Identification

WIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES

Pneumatic Power Bench Assembly

RoHS INPAQ TECHNOLOGY CO., LTD. LFA0805 SERIES (LC Filter Array) Engineering Specification

Power Inductors, Shielded

Time-frequency Analysis Based State Diagnosis of Transformers Windings under the Short-Circuit Shock

SMD - Resistors. Pulse Withstanding Thick Film Chip Resistor-SMDP Series. Product: Size: 0603/0805/1206/1210/2010/2512. official distributor of

Passive Filters. References: Barbow (pp ), Hayes & Horowitz (pp 32-60), Rizzoni (Chap. 6)

July Common Mode Filters. For high-speed differential signal line, general signal line. ACM series. * Dimensions Code JIS[EIA]

(LRP) Metal Strip Chip High Power Low Ohmic Resistor. Token Electronics Industry Co., Ltd. Version: January 12, Web:

ECE315 / ECE515 Lecture 5 Date:

ACX Advanced Ceramic X

Metal Film Precision Resistor. Features

Shielded SMD Power Inductor

Strain Gauge Measuring Amplifier BA 660

TECHNICAL NOTE TERMINATION FOR POINT- TO-POINT SYSTEMS TN TERMINATON FOR POINT-TO-POINT SYSTEMS. Zo = L C. ω - angular frequency = 2πf

WIRE WOUND CHIP INDUCTORS SWI SERIES

WIRE WOUND CHIP INDUCTORS SWI SERIES

WIRE WOUND CHIP INDUCTORS SWI SERIES

SMD MELF - Resistors. Metal Film Precision Resistor - SMDM Series Size: 0204/ official distributor of

POLYTECHNIC UNIVERSITY Electrical Engineering Department. EE SOPHOMORE LABORATORY Experiment 1 Laboratory Energy Sources

± 0.5 % (1 m to < 2 m ) ± 0.1 % (2 m to 200 m ) Temperature Coefficient. ± 25 ppm/ C (1 m to < 3 m ) Max. (- 55 C to C,

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.

Specifications. Customer Part Number - Customer Specification Number -

LEAD FREE CHIP RESISTOR SPECIFICATION

Brevis GPS SMD Antenna

Messrs:Digikey. Preliminary Specifications. Drawing No. Issued Date. Note: Part Number will be revised in case of specification change.

WIRE WOUND CHIP INDUCTORS SWI SERIES

CHIP FERRITE BEADS ARRAY

RC Filters TEP Related Topics Principle Equipment

SMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions

Type CPF Series. Thin Film Precision Resistors. Key Features

Cyaneus GPS Co-planar Antenna

Sensors for Motion and Position Measurement

MICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)

EE133 - Lab 6 RF Amplification: The Power Amplifier and LNA (revisited)

CHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)

SPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)

Chip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application

Microelectronic Circuits

Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS

Notice for TAIYO YUDEN products

Notice for TAIYO YUDEN Products

SMD Resistor Networks

SPECIFICATIONS. Metal Film Precision Resistor. CSRV-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern

SCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.

Rufa 2.4 GHz SMD Antenna Part No. 3030A5839 / 3030A5887 Product Specification

SPECIFICATIONS. Metal Film Precision Resistor. CSR-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern

Specification. Drawing No. UKY1C-H1-15B83-00[43] 1/11 Issued Date. Customer Part Number - Customer Specification Number -

Notice for TAIYO YUDEN Products

YAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...

VI TELEFILTER Filter Specification TFS 70U - 1/5

Thin Film Current Sensing Chip Resistor (TCS Series)

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit

Connector Assemblies 06 JUN 11 Rev C

SPECIFICATION FOR APPROVAL. 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free)

Specifications. Drawing No. USY1M-H / 11 Issued Date.

Chip Beads & Inductors

VI TELEFILTER Filter Specification TFS 211 C 1/5

Ultra- Fast Series 110, 125,

A S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D

Metal Film Precision Resistor. Features

MULTIPOLE CONNECTORS SQUICH CN NEW SQUICH. Connections without tools reduced space SQUICH A TIMESAVER

Notice for TAIYO YUDEN Products [ For General Electronic Equipment ]

- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB

Rufa 2.4 GHz SMD Antenna

Specifications. Customer Part Number - Customer Specification Number - KYOCERA Part Number

Fusca 2.4 GHz SMD Antenna

July Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]

Thin Film Precision Chip Resistor (AR Series)

Mica 2.4 GHz SMD Antenna

TO: Digi-Key. Specifications. Drawing No. K /11. Note:In case of specification change, KYOCERA Part Number also will be changed.

Cyaneus GPS Co-planar Antenna Part No. A10137 giganova Product Specification

SPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)

100 Watt DC-DC Converters Q Series

Locator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION

AFV-P 2U/4U. AC + DC Power Solutions. series. Transient Generation for Disturbance Tests. only. High Performance Programmable AC Power Source

FrelTec GmbH. Current Sensing Chip Resistor SMD

VI TELEFILTER Filter Specification TFS 246 H4 1/5

(1) SHAPES AND DIMENSIONS

YAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents

Metal Film Precision Resistor. Features

Product Specification (KYOCERA CORPORATION CERAMIC RESONATOR SPECIFICATION)

MLZ1608 type. Inductors for decoupling circuits. MLZ series (for automotive) Multilayer ferrite [0603 inch]* December 2017

Brevis GNSS SMD Antenna Part No. A giganova Product Specification

Transcription:

Motocraft SMD Common Mode Flter for Sgnal Lne CMF2012F Seres (Sheldng Type) FEATURES Ths common mode flter s characterzed by ts small szed Hghly effectve n nose suppresson,hght common mode mpedance at sgnal band. Due to the low dfferental-mode mpedance wth hgh couplng factor, there s almost no dstorton on hgh speed sgnal. Ths seres s mcro-produced by auto machnes for ts huge productvty and accuracy wth all-day CCD nspecton. Ths seres s based on 2-lne type. The 3- lne type flter wll be CMF PRODUCT IDENTIFICATION 2012 F - 900-2P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS Used for nose suppresson n any electronc. Devces such as (2) personal computer and perpheral equpment (USB), amusement equpment (IEEE 1394), LCD panels (LVDS) etc. (1) Common mode flter Shapes and dmensons (3) wth I core Sheldng Type (4) Impedance at 0MHz 121 : 120Ω (5) Number of Lne 2P : 2-Lne (6) Lead free, RoHS complant. SHAPES AND DIMENSIONS (mm) RECOMMENDED FOOTPRINT Common-Mode Our Product Part Number Impedance Z(Ω) at 0MHz CMF2012F-670-2P-E 67 ±25% CMF2012F-900-2P-E CMF2012F-121-2P-E CMF2012F-161-2P-E 160±25% 0.35 CMF2012F-181-2P-E 0.35 CMF2012F-221-2P-E 220±25% 0.35 CMF2012F-201-2P-E CMF2012F-261-2P-E CMF2012F-371-2P-E 90 ±25% 120±25% 180±25% 200±25% 260±25% 370±25% CMF2012F-601-2P-E 600±25% DC Resstance Rdc(Ω) Max. 0.25 0.35 0.30 0.35 0.40 0.40 Rated Current Idc(mA) Max. 400 330 370 340 330 Insulaton Resstance (mω)mn. 330 330 300 280 Rated Voltage Vdc(V) Wthstandng Voltage Vdc(V) MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

Motocraft SMD Common Mode Flter for Sgnal Lne CMF2012 Seres (UV Type) FEATURES Ths common mode flter s characterzed by ts small szed Hghly effectve n nose suppresson,hght common mode mpedance at sgnal band. Due to the low dfferental-mode mpedance wth hgh couplng factor, there s almost no dstorton on hgh speed sgnal. Ths seres s mcro-produced by auto machnes for ts huge CMF PRODUCT IDENTIFICATION 2012-900 - 2P - E productvty and accuracy wth all-day CCD nspecton. (1) (2) (3) (4) (5) Ths seres s based on 2-lne type. The 3- lne type flter wll be (1) under development. Product name (2) Shapes and dmensons APPLICATIONS (3) Impedance at 0MHz 900 : 90Ω Used for nose suppresson n any electronc. Devces such as (4) Number of Lne 2P : 2-Lne personal computer and perpheral equpment (USB), amusement (5) Lead free, RoHS complant. equpment (IEEE 1394), LCD panels (LVDS) etc. SHAPES AND DIMENSIONS (mm) RECOMMENDED FOOTPRINT Our Product Part Number CMF2012-670-2P-E CMF2012-900-2P-E CMF2012-121-2P-E CMF2012-181-2P-E Common-Mode Impedance Z(Ω) at 0MHz 67 ±25% 90 ±25% 120±25% 180±25% DC Resstance Rdc(Ω) Max. 0.35 0.35 0.45 0. Rated Current Idc(mA) Max. 330 330 280 2 Rated Voltage Vdc(V) Wthstandng Voltage Vdc(V) Insulaton Resstance (MΩ)Mn. MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

CMF2012-Characterstcs (Impedance vs. Frequency) MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com

Test Equpment for CMF2012- CMF3216 Seres Impedance Measured by usng Aglent E4991A RF Impedance Analyzer. DC Resstance Measured by usng Chroma 162 mll ohm meter. Insulaton Resstance Measured by usng Chroma 19073 Measurement voltage : v,measurement tme : 60 sec. MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

Impedance Test Equpment for CMF2012- Seres Measured by usng Aglent E4991A RF Impedance Analyzer. Measurement termnal 1 4 2 3 DC Resstance Measured by usng Chroma 162 mll ohm meter. Measurement termnal 1 4 2 3 Measurement termnal Insulaton Resstance Measured by usng Chroma 19073 Measurement voltage : v,measurement tme : 60 sec. Measurement termnal 1 4 2 3 MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

Relablty Test Operatng temperature : -25 to +85 Storage temp and humdty : 40,70%RH max. Item Specfcatons Test condtons Solder ablty It can be connected on the Apply cream solder to the test crcut board. Recommendaton solderng condton. It s mounted on the recommendaton solderng condton. Termnal The termnal electrode and the ferrte Solder a chp to test substrate, and then laterally apply a strength must not be damaged. load 0.5Kg n the arrow drecton. φ1.0 Test Board Strength on The termnal electrode and the ferrte Solderng a chp to a test substrate, pc board must not be damaged. bend the substrate by 2mm and then return. bendng 45 45 Wdth sde 40 0 20 length Force Dmensons n mm R Test board : Glass base epoxy multplayer board pc board pattern. PC board pattern : Recommended PC board pattern. MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

PRODUCT SPECIFICATION Hgh temperature resstance Appearance : Ferrte shall not be damaged. Impedance : Wthn ±20% of the ntal value. Temperature : +85±2 Appled voltage : Rated voltage Appled current : Rated current Testng tme : 0±12 hours nsulaton resstance: >(MΩ) Measurement : After placng for 24 hours mn. DC resstance : standard value Humdty resstance nsde. Temperature : +85±2 Humdty : 90 to 95%RH Appled current : Rated current Appled voltage : Rated voltage Testng tme : 0±12 hours Measurement : After placng for 24 hours mn. Thermal shock Temperature : -40,+85 kept stablzed for 30 mnutes each. Cycle : 0 cycle Measurement : After placng for 24 hours mn. 1 cycle +85 30 mn. 30 sec -40 30 mn. Low Temperature : -40±2 temperature storage Testng tme : 0±12 hours Measurement : After placng for 24 hours mn. Vbraton Appearance : Ferrte shall not be Frequency : to Hz damaged. Ampltude : 1.52 mm Dmenson and tmes : X,Y and Z drectons for 2 hours each. MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

8.0±0.2 1.75±0.1 3.5±0.1 2.25±0.05 Packagng The packagng must be done not to receve any damage durng transportng and storng. Tape dmensons 4.0±0.1 1.4±0.1 φ1.5 +0.1-0.0 φ1.0 +0.2-0.0 1.35±0.1 0.23±0.05 4.0±0.1 Dmenson n mm 2.0±0.1 Reel dmensons R φa w t Symbol T φa 180+0,-3 φb 60+1,-0 φb φc 13±0.2 D 2.2±0.5 W 9.0±0.3 t 1.2 φc D R 1 Tappng fgure Top cover tape Carrer tape Sprocket hole Cavty (chp nsert) MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

0.4 0.4 W B0 Packagng Form There shall not contnuaton more than two vacances of the product. (360 mm) Blank Chp Blank Leader. ( ptches) (70 ptches) K0 Materal of carrer tape : Polystyrene Materal of cover tape : Polyester Cover Tape Peel Strength The force for tearng off cover tape s 0.05~0.69(N) n the arrow drecton at the followng condtons: Temperature : 5 ~ 35 Humdty : 45 ~ 85% Atmospherc pressure : 860 ~ 60 hpa Top cover tape 160 ~ 180 Packng Quantty Base tape φ180 mm reel T type : 2000 pcs./reel Recommended Solderng Condtons (Please use ths product by reflow solderng) Recommended Footprnt Termnaton Number : Please refer to the equvalent crcut n chapter 3. 2.6 1.2 0.8 1.0 MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

Recommended Reflow Pattern Reflow : untl two tmes Preheat 0sec. Max. sec. Max. 255 200 Natural coolng 1 20sec. Max. 60sec. Mn. Iron Solderng Use a solder ron of less than 30W when solderng,do not allow the solderng ron tp drectly touch the ferrte body outsde of termnal electrode. 2 seconds max. at 280. Attenton n Case of Usng In case of usng product,please avod followng matters: Splashng water or salt water Dew condenses Toxc gas (Hydrogen sulfde, Sulfurous acd,chlorne, Ammona) Vbratons or shocks whch exceed the specfed condton Please be careful for the stress to ths product by board flexure or somethng after the mountng. Others Operatng temperature range : -40~+85 Storage temperature range : -40~+85 Temperature rse : Below 20 Humdty range : 0~90%R.H. MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.

Impedance(OHM) Impedance(OHM) Motocraft CMF2012F-Characterstcs (Impedance vs. Frequency) CMF2012F-161-2P-E 00 0 Common Mode Dfferenta l Mode 1 CMF2012F-221-2P-T 1 0 00 Frequency(MHz) CMF2012F-221-2P-E 000 00 0 Common Mode Dfferenta l Mode 1 1 0 00 Frequency(MHz) MOTOCRAFT Tel:886-2-22701463 Fax:886-2-22653969 Emal:sales@motocraft.com http://www.motocraft.com.