DATA SHEET: Power DomiLED Power DomiLED With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > High brightness surface mount LED using thin film technology. > 120 viewing angle. > Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. > Qualified according to JEDEC moisture sensitivity Level 2. > Compatible to IR reflow soldering. > Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. 2005 DomiLED is a trademark of. All rights reserved. Product specifications are subject to change without notice. 1
Optical Characteristics at Tj=25 C Part Ordering Number Color Viewing Angle Luminous Intensity @ IF = 50mA IV (mcd) Min. Typ. Max. Appx 1.1 DWA-MZJS-W2X-1 DWY-MZJS-W2X-1 Amber, 615nm Yellow, 587nm 120 120 1400.0 1400.0 2240.0 2240.0 2850.0 2850.0 Not for new design Electrical Characteristics at Tj=25 C Part Number Min. (V) Appx 3.1 Vf @ If = 50mA Typ. (V) Max. (V) DWx-MZJS 2.00 2.20 2.65 Absolute Maximum Ratings DC forward current Maximum Value 70 Unit ma Peak pulse current; (tp 10µs, Duty cycle = 0.1) 100 ma Reverse voltage Not for reverse bias V ESD threshold (HBM) 2000 V LED junction temperature 125 C Operating temperature -40 +100 C Storage temperature -40 +100 C Power dissipation (at room temperature) 200 mw Thermal resistance - Junction / ambient, R th JA - Junction / solder point, R th JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 300 130 K/W K/W 2
Characteristics Symbol Part Number Value Unit Temperature coefficient of dom (typ) I F = 50mA; 0 C <= T <= 100 C TC DWA-MZJS 0.07 dom (typ) DWY-MZJS 0.10 nm / K Temperature coefficient of V F (typ) I F = 50mA; 0 C <= T <= 100 C TC V DWA-MZJS DWY-MZJS -2.3-1.7 mv / K Temperature coefficient of I V (typ) I F = 50mA; 0 C <= T <= 100 C TC IV DWA-MZJS DWY-MZJS -0.8-1.0 % / K Wavelength Grouping at Tj= 25 C Color Group Wavelength distribution (nm) Appx 2.2 DWA; Amber Full W X 610-621 610-615 615-621 DWY; Yellow Full W X Y Z 582-594 582-585 585-588 588-591 591-594 3
Luminous Intensity Group at Tj=25 C Brightness Group W2 X1 X2 Luminous Intensity IV (mcd) 1400.0...1800.0 1800.0...2240.0 2240.0...2850.0 Appx 1.1 Vf Bining (Optional) at Tj= 25 C Vf @ If = 50mA V5A Forward Voltage (V) 2.05... 2.20 Appx 3.1 V5B 2.20... 2.35 V5C 2.35... 2.50 V5D 2.50... 2.65 Please consult sales and marketing for special part number to incorporate Vf binning. 4
Allowable Forward Current I F ( ma ) Forward Current I F (ma) Forward Current I F (ma) TM Relative Luminous Intensity Vs Forward Current I V /I V (50mA) = f(i F ); Tj = 25 C Forward Current Vs Forward Voltage I F = f(v F ); T j = 25 C Relative Luminous Intensity I rel Forward Current I F (ma) Forward Voltage V F (V) Maximum Current Vs Temperature I F =f(t) Relative Spectral Emission I rel = f(λ); T j = 25 C; I F = 50mA Relative Luminous Intensity I rel Orange Yellow Yellow Amber Red Amber Super Red Temperature T( C) Wavelength λ (nm) Allowable Forward Current Vs Duty Ratio ( T j = 25 C; t p 10μs ) Radiation Pattern 30 20 10 0 1.0 40 0.8 50 0.6 60 0.4 70 0.2 80 90 0 Duty Ratio, % 5
DomiLED AllnGaP : DWx-MZJS Package Outlines Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 6
Recommended Solder Pad TM TM AlInGaP : DWx-MKG 7 31/10/2016 V1.0
Taping and orientation Reels come in quantity of 2000 units. Reel diameter is 180 mm. 8
Packaging Specification 9
Packaging Specification Moisture sensitivity level Barcode label (L) Lot No : lotno (P) Part No : partno (C) Cust No : partno ML TEMP 2 260 C RoHS Compliant (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no Moisture absorbent material + Moisture indicator Reel Label The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) Weight (gram) 0.034 190 240 ± 10 TM Cardboard Box For Power DomiLED Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 10 16/03/2018 V.4.0
Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 275 255-260 C 10-30s 250 225 217 C Ramp-up 3 C/sec max. Temperature ( C) 200 175 150 125 100 75 Preheat 60-180s 50 480s max 25 0 50 100 150 200 Time (sec) 60-150s Rampdown 6 C/sec max. 11
Appendix 1) Brightness: 1.1 Luminous intensity is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.2 Luminous flux is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.3 Radiant intensity is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.4 Radiant flux is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 2) Color: 2.1 Chromaticity coordinate groups are measured at current pulse 25 ms(typ) with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3). 2.2 Dominant wavelength is measured at current pulse 25 ms(typ) with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3). 3) Voltage: 3.1 Forward Voltage, Vf is measured when a current pulse of 8 ms(typ) with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3). 4) Typical Values: 4.1 At special conditions of LED manufacturing processes, typical data or calculated correlations of technical parameters only reflect the statistical figures. But not necessarily correspond to the actual parameters of each single product, which could differ from the typical data or calculated correlations or the typical characteristic line. These typical data may change whenever technical improvements happen. 5) Tolerance of Measure 5.1 Unless otherwise noted in drawing, tolerances are specified with ± 0.1 and dimension are specifiec in mm. 6) Reverse Voltage: 6.1 Not designed for reverse operation. Continuous reverse voltage can cause migration and LED damage. 12
Revision History Page - 3 4 1, 10, 12 Subjects Initial release Add Characteristics Typo error on Vf Binning Update Product Photo Update Package Specification Add Appendix Date of Modification 20 Apr 2012 10 May 2013 28 Apr 2014 16 Mar 2018 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, does not assume any liability arising out of the application or use of any product described herein. reserves the right to make changes to any products in order to improve reliability, function or design. products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of. 13
About Us is a dynamic company that is amongst the world s leading automotive LED manufacturers. With an extensive industry experience and relentless pursuit of innovation, s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More information about, a ISO/TS 16949 and ISO 14001 certified company, can be found under http://www.dominant-semi.com. Please contact us for more information: Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: sales@dominant-semi.com