PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM s for wooden and laminate floors Unisystem Plus - Unisystem Application UNISYSTEM PLUS and UNISYSTEM are two professional systems for laying floating wood and laminated floors, which also permits its necessary expansion. Both systems comprise a base profile in natural aluminum and a top having various functions: cover trims for equal levels; profiles for different levels, permitting thickness compensation between flooring that is not flush; terminal profiles, which delimit flooring in parquet or laminates; perimeter profiles, used to connect flooring to wall coverings; step nosing profiles for stairs. UNISYSTEM PLUS, evolved from the UNISYSTEM system, distinguishes itself in its use of special Teflon dowels that allow for a quicker laying of the top profile and thus its possible removal for reorganization and/or maintenance of the floor. Both systems feature: simplicity in their laying out, limited thickness of the top profile, dimensional stability, use for floorings of thicknesses between 6.5 to 22.6mm (UNISYSTEM PLUS) and from 6.5 to 15mm (UNISYSTEM ), available in a variety of decors (4 anodized finishes, 28 wooden decors, 8 real wood decors). For both systems the "base" profiles are fixed to the foundation through the use of screws and dowels or with the proper adhesive (such as PP/86). Materials Natural aluminum Al-Mg-Si Alloy heat treated to T6 temper (6060 T6) These profiles are made by extrusion and guarantee a distinct resistance to chemical and atmospheric agents. Wet cement and its derivatives produce alkaline substances that, when left to act on the surface, can corrode metal (formation of aluminum hydroxide). For this reason, the visual surface of the profile must be cleaned thoroughly of cements, adhesives and caulking or stopping material. Anodized aluminum Al-Mg-Si Alloy heat treated to T6 temper (6060 T6) These profiles are made by extrusion and subsequently anodized. They are well-resistant to chemical and atmospheric agents. Wet cement and its derivatives produce alkaline substances that, when left to act on the surface, can corrode metal (formation of aluminum hydroxide). For this reason, the visual surface of the profile must be cleaned thoroughly of cements, adhesives and caulking or stopping material. As a result of wear and treading (when these profiles are used on flooring), anodized surfaces wear down, losing their original finish. High shine aluminum Al-Mg-Si Alloy heat treated to T6 temper (6463 T6) These profiles are made by extrusion and subsequently treated and mechanically worked.they guarantee a discernible resistance to chemical and atmospheric agents. Wet cement and its derivatives produce alkaline substances that, when left to act on the surface, can corrode metal (formation of aluminum hydroxide). For this reason, the visual surface of the profile must be cleaned thoroughly of cements, adhesives and caulking or stopping material. Do not use profiles in high shine aluminum on floors. Coated aluminum - Alcrom Plus Al-Mg-Si Alloy heat treated to T6 temper (6060 T6) These profiles are made by extrusion in natural alloy. The coating is obtained through the use of an Alcrom Plus film covering, which is resistant to wear and tear and which replicates the diverse tonalities and/or finishes of wood. Aluminum coated with shears of Real Wood Al-Mg-Si Alloy heat treated to T6 temper (6060 T6) These profiles are made by extrusion in natural alloy. The finish is obtained by the use of slices of real wood of different species. Real Wood profiles 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 1/28
coated following a natural process of oxidation, when applied or even simply exposed to light, become darker. Thus it is recommended to leave the profiles in their packaging until ready to use. General note on metals Aluminium is not resistant to all chemical compounds and it would thus be necessary to keep it away from particularly aggressive products such as hydrochloric acid (HCl) and phosphoric acid (H3PO4) Products that can be used for cleaning stones, ceramics and gres, namely muriatic acid, ammonia, bleach or sodium hypochlorite damage the surface finish of the metal and may cause intense corrosive reactions. Therefore, it is necessary to always remove, and as fast and gently as possible, residues of cement, adhesives and materials for caulking and stopping from the surface of profiles. Laying Laying instructions for the Unisystem Plus system Take the profiles out of the packaging. Check that the thickness of the covering or flooring to be laid corresponds with the height of the selected profile (see the label). Remove, wherever present, the protection (protective and/or thermo-shrink film) of the profile s finish. Measure and cut the base profile to the required length with the proper tools. The base profile can be laid to the floor by: Use of the adequate adhesive (such as PP/86); in this case, lay the profile, leaving sufficient space to insert the flooring to be laid and for its expansion (about 10mm); after making sure that the laying surface for the base is perfectly clean, press the profile so that the previously applied adhesive comes out from the perforations of the tabs. Use of screws and dowels; in which case: place the base profile, already cut to measure, in the correct position and, with indelible ink, mark the exact position of the holes of the base profile where drilling is necessary. Remove the base profile and drill into the floor in the exact positions marked in the previous step, careful to verify the exact dimensions of the dowels to be used. Clean the laying are completely and insert the dowels into the holes in the floor; reposition the profile into the correct position, mindful of the expansion of the floor to be laid (about 10mm), and fix it to the floor with adequate screws. Measure and cut the top profile to the necessary length. Apply the Teflon dowels to the guide underneath the top profile every 15-20cm. Position the corresponding top profile on the base profile (already fixed to the floor); carefully using a hammer (placing a wooden wedge between the top profile and the hammer to prevent damage), until it is fully inserted into the base profile. Unisystem Plus - Junction Unisystem Plus - Edge Unisystem Plus - Stair Nosing Laying instructions for the Unisystem system Take the profiles out of the packaging. Check that the thickness of the floor covering to be laid corresponds with the height of the selected base profile (see the label). Remove, wherever present, the protection (protective and/or thermo-shrink film) of the profile s finish. Measure and cut the base profile to the required length with the proper tools. The base profile can be laid to the floor by: Use of the adequate adhesive (such as PP/86); in this case, lay the profile, leaving sufficient space to insert the flooring to be laid and for its expansion (about 10mm); after making sure that the laying surface for the base is perfectly clean, press the profile so that the previously applied adhesive comes out from the perforations of the tabs. Use of screws and dowels; in which case: place the base profile, already cut to measure, in the correct position and, with indelible ink, mark the exact position of the holes of the base profile where drilling is necessary. Remove the base profile and drill into the floor in the exact positions marked in the previous step, careful to verify the exact dimensions of the dowels to be used. Clean the laying are completely and insert the dowels into the holes in the floor; reposition the profile into the correct position, mindful of the expansion of the floor to be laid (about 10mm), then fix it to the floor with adequate screws. Measure and cut the top profile to the necessary length. 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 2/28
Apply the Teflon dowels to the guide underneath the top profile every 15-20cm. Position the corresponding top profile on the base profile (already fixed to the floor); carefully using a hammer (placing a wooden wedge between the top profile and the hammer to prevent damage), until it is fully inserted into the base profile. Unisystem - Junction Unisystem - Edge Unisystem - Stair Nosing Care and maintenance Aluminum These need no particular maintenance and are easily cared for with colorless alcohol diluted in water or with normal detergents, though not acid-based products (e.g. hydrochloric or hydrofluoric acid). For cleaning tasks, a wide array of detergents coming in a variety of commercial brands and of numerous manufacturers are generally used. In general, there are three product types: Alkaline type Neutral type Acid type For cleaning, neutral detergent diluted in water and a rinsing agent of solely water is recommended, using a sponge and/or non-abrasive cloth to prevent scratches and/or damage to the anodization, shine or varnish. During cleaning, the following should be kept in mind: Do not use acid or alkaline detergents, since they can damage aluminum; Do not use abrasive products and/or materials; Do not use organic solvents on varnished surfaces; Do not use detergents with unknown chemical compositions; Do not apply detergents directly to the surface to be cleaned; Surfaces must be relatively cold when cleaning (Max. Temp = 30ºC) and not exposed directly to sunlight; Detergents used for cleaning must be in turn cold (Max. Temp = 30ºC) and spray devices must not be used. In any case, the last phase of cleaning is always an adequate rinsing with water on the part that has been treated, followed immediately by drying with a soft cloth or rag. Maintenance with polishing products or similar is unnecessary. Effect a quick and accurate cleaning of the profile, according to the indications on the product s packaging, in order to prevent possible cement deposits, caulking material or similar products that may end up attacking the surface layers. Aluminum coated - Alcrom Plus This finish needs no special maintenance, since it is easily cleaned with alcohol diluted in water or with normal detergent that is not acid or alkaline based, also diluted in water; rinsing thoroughly at the end with water only. Use a non-abrasive sponge or cloth to prevent scratches on the surface. Aluminum coated with shears of Real Wood The film used for the coating of this profile is for all effects wood and therefore it should be cared for as such. In order to slow down the process of color variation of the wood over time, it is recommended to avoid direct exposure to sunlight. Cleaning can be carried out with normal detergents for parquet in stores, using a soft cloth, preferably in suede and well wrung. Avoid the use of any detergent that contains abrasive particles, which could scratch the surface of the profile. The surface should be wiped down and dried immediately after cleaning. Fire Control Measures In case of fire, extinguish with fire-fighting chemical products, dry sand or solid fire-extinguishing agents. 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 3/28
NOTE These profiles must be handled with care, taking the necessary steps to use suitable gloves to prevent wounds such as cuts to the hand. All indications and instructions here have come from our own experience to be understood as purely informative and will have to be confirmed through exhaustive practical experience. Profilpas will not be held responsible for any personal injury or material damage from improper use of the product. The user is responsible for establishing whether the product is suitable for the task and likewise must assume all responsibility for incorrect laying of material. 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 4/28
C Article C/7/SF C/10/SF C/13/SF C/22/SF Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 15,5 22,6 Width L [mm] 40 45 48 52 Length [cm] 270 270 270 270 Anodised Aluminium Silver 67007 67077 67147 66907 Gold 67017 67087 67157 66917 Sand Gold 67024 67094 67164 66924 Bronze 67027 67097 67167 66927 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 5/28
in blister packaging Article TPC/47/CV TPC/410CV TPC/413CV Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 Width L [mm] 40 45 48 Length [cm] 90 90 90 Anodised Aluminium Silver 43214 43286 43358 Gold 43218 43290 43362 Article C/7/SF Floor thickness [mm] 6,5 9,5 Width L [mm] 40 Length [cm] 270 Bright satin Aluminium Titanium 67030 Article C/7/SF C/10/SF C/13/SF C/22/SF Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 15,5 22,6 Width L [mm] 40 45 48 52 Length [cm] 270 270 270 270 Alcrom Plus foiled Aluminium Decor 02 66001 Dekor 04 66002 Decor 07 66003 66103 66203 Decor 08 66004 66104 66204 Decor 09 66005 66105 66205 Decor 10 66007 66107 66207 66937 Decor 11 66008 Decor 13 66010 Decor 15 66015 66115 66215 Decor 18 66016 66116 66216 Decor 20 66017 66117 66217 66939 Decor 30 66027 66127 66227 Decor 32 66029 Decor 34 66031 Decor 35 66032 Decor 36 66033 66133 66228 Decor 37 66034 66134 66229 Decor 38 66035 66135 66235 Decor 40 66037 66137 66237 66941 Decor 41 66038 Decor 42 66039 66139 66239 Decor 43 66040 Decor 44 66041 Decor 45 66043 66143 66243 Decor 46 66042 Decor 48 66045 66145 66245 Decor 50 66047 66147 66247 66947 Decor 60 66057 66157 66257 66949 Decor 65 66065 66165 66265 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 6/28
Decor 70 66067 66167 66267 66953 Decor 71 66068 66178 66268 Decor 72 66069 66179 66269 Decor 73 66070 66180 66270 Decor 74 66071 66181 66271 Decor 75 66075 66175 66275 Decor 76 66074 66182 66272 Decor 77 66072 Decor 78 66076 66176 66276 Decor 79 66073 Decor 80 66077 66177 66277 66957 Decor 81 66078 Decor 90 66087 66187 66287 66089 Decor 93 66090 Decor 94 66091 Decor 95 66092 in blister packaging Article TPC/47/CV TPC/410CV TPC/413CV Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 Width L [mm] 40 45 48 Length [cm] 90 90 90 Alcrom Plus foiled Aluminium Decor 09 43230 43302 43374 Decor 10 43234 43306 43378 Decor 15 43238 43310 43382 Decor 20 43242 43314 43386 Decor 30 43246 43318 43390 Decor 38 43248 43320 43392 Decor 40 43250 43322 43394 Decor 42 43252 43324 43396 Decor 45 43254 43326 43398 Decor 48 43258 43330 43402 Decor 50 43262 43334 43406 Decor 60 43266 43338 43410 Decor 65 43270 43342 43414 Decor 70 43274 43346 43418 Decor 75 43278 43350 43422 Decor 78 43280 43352 43424 Decor 80 43282 43354 43426 Decor 90 43284 43356 43428 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 7/28
Article C/10/SF C/13/SF Floor thickness [mm] 9,6 12,5 12,6 15,5 Width L [mm] 45 48 Length [cm] 270 270 Real Wood foiled Aluminium Wood 300 60240 60350 Wood 310 60244 60354 Wood 320 60248 60358 Wood 330 60252 60362 Wood 340 60256 60366 Wood 350 60260 60370 Wood 360 60264 60374 Wood 370 60268 60378 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 8/28
Z Article Z/1/SF Z/1/SF Z3/30/SF Z5/50 Floor thickness [mm] 6,5 22,6 6,5 22,6 6,5 22,6 6,5 22,6 Width L [mm] 35 40 30 50 Length [cm] 270 270 270 270 Anodised Aluminium Silver 67217 63700 63760 Gold 67227 63702 63761 Sand Gold 67234 63704 Bronze 67237 63762 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 9/28
in blister packaging Article TPZ/47/CV TPZ/410CV TPZ/413CV Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 Width L [mm] 40 40 40 Length [cm] 90 90 90 Anodised Aluminium Silver 43000 43072 43144 Gold 43004 43076 43148 Article Z/1/SF Floor thickness [mm] 6,5 22,6 Width L [mm] 40 Length [cm] 270 Bright satin Aluminium Titanium 67240 Article Z/1/SF Z3/30/SF Z5/50 Floor thickness [mm] 6,5 22,6 6,5 22,6 6,5 22,6 Width L [mm] 40 30 50 Length [cm] 270 270 270 Alcrom Plus foiled Aluminium Decor 02 66301 Dekor 04 66302 Decor 07 66303 63717 Decor 08 66304 63718 63767 Decor 09 66305 63719 63768 Decor 10 66307 63720 63769 Decor 11 66308 Decor 12 66309 Decor 13 66310 Decor 15 66315 63721 63770 Decor 18 66316 63722 Decor 20 66317 63725 63772 Decor 30 66327 63726 Decor 32 66329 Decor 34 66331 Decor 35 66332 Decor 36 66333 63728 63774 Decor 37 66334 63729 63775 Decor 38 66335 63727 63776 Decor 40 66337 63730 63777 Decor 41 66338 Decor 42 66339 63731 63778 Decor 43 66340 Decor 44 66341 Decor 45 66343 63732 63779 Decor 46 66342 Decor 48 66345 63735 63780 Decor 50 66347 63740 63781 Decor 60 66357 63745 63782 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 10/28
Decor 65 66365 63746 63783 Decor 70 66367 63747 63784 Decor 71 66368 63752 Decor 72 66369 63753 Decor 73 66370 63754 63787 Decor 74 66371 63755 63788 Decor 75 66375 63748 63789 Decor 76 66374 63756 63790 Decor 77 66372 Decor 78 66376 63749 63791 Decor 79 66373 Decor 80 66377 63750 63792 Decor 81 66378 Decor 90 66387 63751 63793 66389 Decor 93 66390 Decor 94 66391 Decor 95 66392 in blister packaging Article TPZ/47/CV TPZ/410CV TPZ/413CV Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 Width L [mm] 40 40 40 Length [cm] 90 90 90 Alcrom Plus foiled Aluminium Decor 09 43016 43088 43160 Decor 10 43020 43092 43164 Decor 15 43024 43096 43168 Decor 20 43028 43100 43172 Decor 30 43032 43104 43176 Decor 38 43034 43106 43178 Decor 40 43036 43108 43180 Decor 42 43038 43110 43182 Decor 45 43040 43112 43184 Decor 48 43044 43116 43188 Decor 50 43048 43120 43192 Decor 60 43052 43124 43196 Decor 65 43056 43128 43200 Decor 70 43060 43132 43204 Decor 75 43064 43136 43208 Decor 78 43066 43138 43210 Decor 80 43068 43140 43212 Decor 90 43070 43142 43213 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 11/28
Article Z/1/SF Floor thickness [mm] 6,5 22,6 Width L [mm] 40 Length [cm] 270 Real Wood foiled Aluminium Wood 300 60200 Wood 310 60204 Wood 320 60208 Wood 330 60212 Wood 340 60216 Wood 350 60220 Wood 360 60224 Wood 370 60228 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 12/28
S Article S/9/SF S/15/SF Floor thickness [mm] 6,5 22,6 9,6 22,6 Height H1 [mm] 9.4 13 Width L [mm] 32 32 Length [cm] 270 270 Anodised Aluminium Silver 65680 65480 Gold 65685 65485 Sand Gold 65688 65488 Bronze 65690 65490 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 13/28
in blister packaging Article TPS/47/CV TPS/410CV TPS/413CV Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 Height H [mm] 9.4 10 13 Width L [mm] 32 32 32 Length [cm] 90 90 90 Anodised Aluminium Silver 43430 43502 43574 Gold 43434 43506 43578 Article S/9/SF Floor thickness [mm] 6,5 22,6 Height H1 [mm] 9.4 Width L [mm] 32 Length [cm] 270 Bright satin Aluminium Titanium 65695 Article S/9/SF S/15/SF Floor thickness [mm] 6,5 22,6 9,6 22,6 Height H1 [mm] 9.4 13 Width L [mm] 32 32 Length [cm] 270 270 Alcrom Plus foiled Aluminium Decor 02 65701 Dekor 04 65702 Decor 07 65703 Decor 08 65704 Decor 09 65705 65505 Decor 10 65707 65507 Decor 11 65708 Decor 12 65709 Decor 13 65710 Decor 15 65715 65515 Decor 18 65716 Decor 20 65717 65517 Decor 30 65727 65527 Decor 32 65729 Decor 34 65731 Decor 35 65732 Decor 36 65733 Decor 37 65734 Decor 38 65735 65535 Decor 40 65737 65537 Decor 41 65738 Decor 42 65739 65539 Decor 44 65741 Decor 45 65743 65543 Decor 46 65742 Decor 48 65745 65545 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 14/28
Decor 50 65747 65547 Decor 60 65757 65557 Decor 65 65765 65565 Decor 70 65767 65567 Decor 71 65768 Decor 72 65769 Decor 73 65770 Decor 74 65771 Decor 75 65775 65575 Decor 76 65774 Decor 77 65772 Decor 78 65776 65576 Decor 79 65773 Decor 80 65777 65577 Decor 81 65778 Decor 90 65785 65579 65789 Decor 93 65790 Decor 95 65792 in blister packaging Article TPS/47/CV TPS/410CV TPS/413CV Floor thickness [mm] 6,5 9,5 9,6 12,5 12,6 15,5 Height H [mm] 9.4 10 13 Width L [mm] 32 32 32 Length [cm] 90 90 90 Alcrom Plus foiled Aluminium Decor 09 43446 43518 43590 Decor 10 43450 43522 43594 Decor 15 43454 43526 43598 Decor 20 43458 43530 43602 Decor 30 43462 43534 43606 Decor 38 43465 43537 43609 Decor 40 43466 43538 43610 Decor 42 43468 43540 43612 Decor 45 43470 43542 43614 Decor 48 43474 43546 43618 Decor 50 43478 43550 43622 Decor 60 43482 43554 43626 Decor 65 43486 43558 43630 Decor 70 43490 43562 43634 Decor 75 43494 43566 43638 Decor 78 43497 43569 43641 Decor 80 43498 43570 43642 Decor 90 43500 43572 43644 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 15/28
Article S/9/SF Floor thickness [mm] 6,5 22,6 Height H1 [mm] 9.4 Width L [mm] 32 Length [cm] 270 Real Wood foiled Aluminium Wood 300 60280 Wood 310 60284 Wood 320 60288 Wood 330 60292 Wood 340 60296 Wood 350 60300 Wood 360 60304 Wood 370 60308 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 16/28
P1 Article P/1/SF Floor thickness [mm] 6,5 22,6 Width L [mm] 37 Length [cm] 270 Anodised Aluminium Silver 66407 Gold 66417 Bronze 66427 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 17/28
Article P/1/SF Floor thickness [mm] 6,5 22,6 Width L [mm] 37 Length [cm] 270 Alcrom Plus foiled Aluminium Decor 09 66435 Decor 10 66437 Decor 15 66455 Decor 20 66457 Decor 30 66467 Decor 40 66477 Decor 42 66479 Decor 45 66483 Decor 48 66485 Decor 50 66487 Decor 60 66497 Decor 65 66505 Decor 70 66507 Decor 75 66515 Decor 80 66517 Decor 90 66519 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 18/28
G/1 Article G/1/SF Floor thickness [mm] 6,5 15 Length [cm] 270 Anodised Aluminium Silver 66557 Gold 66567 Sand Gold 66574 Bronze 66577 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 19/28
in blister packaging Article TG/411/CV TG/415/CV Floor thickness [mm] 6,5 10 11 15 Height H [mm] 20 20 Width L [mm] 25 25 Length [cm] 107 107 Anodised Aluminium Silver 45006 45106 Gold 45012 45112 Article G/1/SF Floor thickness [mm] 6,5 15 Length [cm] 270 Alcrom Plus foiled Aluminium Decor 09 66585 Decor 10 66587 Decor 15 66595 Decor 20 66597 Decor 30 66607 Decor 38 66615 Decor 40 66617 Decor 42 66619 Decor 45 66623 Decor 48 66625 Decor 50 66627 Decor 60 66637 Decor 65 66645 Decor 70 66647 Decor 75 66655 Decor 78 66656 Decor 80 66657 Decor 90 66667 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 20/28
in blister packaging Article TG/411/CV TG/415/CV Floor thickness [mm] 6,5 10 11 15 Height H [mm] 20 20 Width L [mm] 25 25 Length [cm] 107 107 Alcrom Plus foiled Aluminium Decor 09 45204 Decor 10 45206 45306 Decor 15 45208 Decor 20 45212 45312 Decor 30 45218 45318 Decor 40 45224 45324 Decor 42 45225 Decor 45 45226 Decor 48 45228 Decor 50 45230 45330 Decor 60 45236 45336 Decor 65 45238 Decor 70 45242 45342 Decor 75 45244 Decor 80 45245 45345 Decor 90 45246 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 21/28
G/4 Article G/4/SF Floor thickness [mm] 6,5 15 Length [cm] 270 Anodised Aluminium Silver 63900 Gold 63902 Sand Gold 63904 Article G/4/SF Floor thickness [mm] 6,5 15 Length [cm] 270 Alcrom Plus foiled Aluminium Decor 02 63905 Dekor 04 63909 Decor 07 63906 Decor 08 63907 Decor 09 63908 Decor 10 63910 Decor 12 63913 Decor 13 63916 Decor 15 63912 Decor 18 63914 Decor 20 63915 Decor 30 63918 Decor 32 63917 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 22/28
Decor 34 63923 Decor 35 63924 Decor 36 63942 Decor 37 63943 Decor 38 63919 Decor 40 63920 Decor 42 63921 Decor 43 63927 Decor 44 63929 Decor 45 63922 Decor 46 63936 Decor 48 63925 Decor 50 63928 Decor 60 63930 Decor 65 63931 Decor 70 63932 Decor 71 63951 Decor 72 63952 Decor 73 63953 Decor 74 63954 Decor 75 63933 Decor 76 63956 Decor 77 63937 Decor 78 63934 Decor 79 63938 Decor 80 63935 Decor 81 63939 Decor 90 63940 63941 Decor 93 63944 Decor 94 63945 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 23/28
G/5 Article G/5 Floor thickness [mm] 6,5 10 Length [cm] 270 Anodised Aluminium Silver 63850 Gold 63852 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 24/28
G/6 Article G/6/SF Floor thickness [mm] 6,5 15 Length [cm] 270 Anodised Aluminium Silver 63800 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 25/28
BASI UNISYSTEM PLUS Article TBU/6 A TPU/6 TPU/10 TPU/13 TPU/15 TPU/22 Adhesive Floor thickness [mm] 6,5 9,5 6,5 9,5 9,6 12,5 12,6 15,5 15 19 19,6 22,6 Length [cm] 270 270 270 270 270 270 Natural Aluminium 67436 67437 67447 67457 67460 67467 Fixing clip Article TU/6 Height H [mm] 6 Teflon 68812 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 26/28
BASI UNISYSTEM Article T/7 T/10 T/11 T/13 T/15 Floor thickness [mm] 6,5 9,5 10 12 6,5 10 13 15 11 15 Length [cm] 270 270 270 270 270 Natural Aluminium 67287 67297 67317 67307 67327 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 27/28
Impiego basi Unisyetm Plus ed Unisystem 10.1.01 s for wooden and laminate floors Unisystem Plus - Unisystem 28/28