INSTRUCTION PACKAGE XILION BEAD NECKLACE FANCY SQUARE
INSTRUCTION PACKAGE XILION BEAD NECKLACE FANCY SQUARE Stringing Wiring SWAROVSKI ELEMENTS Article Product Group Article No. Amount Size Color Color Code Fancy Stones 4437 1 pc. 30 mm Crystal Silver Shade 001 SSHA Beads 5328 16 pcs. 3 mm Jet Hematite 2x 280 HEM2 Beads 5328 68 pcs. 4 mm Crystal Satin 001 SAT Beads 5328 38 pcs. 4 mm Jet Hematite 2x 280 HEM2 Beads 5328 3 pcs. 6 mm Jet Hematite 2x 280 HEM2 Supplies & Tools Supplies Cord, grey, 4 mm, 2.65 m Nylon thread, transparent, 0.3 mm, 10 cm Wire, black, 0.7 mm, 5 m Tools Chain nose pliers Lighter Pins Round nose pliers Scissors Side cutter Tape Level of design: INTERMEDIATE Have also a look at the text instruction at the last page! STEP 1 4 mm A A=55 = = cm B B= = = 52 52 cm C = 55.5 cm D C= = = 47.5 55.5 cm E D= = = 55 47.5 cm cm E= = 55 cm 2 /12
B D A C E 3 /12
Step STEP 2 2 0.7 mm 24 cm x10 Step 3 STEP 3 STEP p 4 Repeat step x9: Scale 1:2 4 /12
STEP 5 Step 5 0.7 mm 10 10 cm cm x1 x1 x2 Scale1:1 STEP 6 Repeat step 5 -- 66 x2: x2: Scale 1:2 Repeat step 5 5 /12
Step 7 STEP 7 0.7 mm 12 cm Scale 1:1 1:1 Step 8 STEP 8 STEP 9 Repeat step 6 6 /12
STEP 10 Step 0 0.7mm mm 0.7 12 cm cm 12 STEP 11 7/12
Step STEP 12 12 Repeat step 6 STEP 13 x13 0.3 mm 10 cm Step STEP 14 14 0.7 mm 10 cm 8 /12
x1 x10 x3 x3 STEP Step 15 15 STEP 16 Scale 1:2 1:2 9 /12
STEP 17 Repeat step 14 x10: Step 17 Repeat step 14 x10: 0.7 mm 88x x 10 10 cm cm Scale 1:1 1:1 Repeat Repeat step step x9 x9 10 /12
Scale 1:2 1:2 11 /12
CREATE YOUR STYLE with SWAROVSKI ELEMENTS Instruction Package XILION Bead Necklace Fancy Square STEP 1: STEP 2: STEP 3: STEP 4: STEP 5: STEP 6: STEP 7: STEP 8: STEP 9: STEP 10: STEP 11: STEP 12: STEP 13: STEP 14: STEP 15: STEP 16: STEP 17: Cut a 4 mm cord into fi ve lengths A = 55 cm, B = 52 cm, C = 55.5 cm, D=47.5 cm and E = 55 cm. Pierce pins into the closely placed cords, as shown in the illustrations in this step Cut ten 24 cm pieces of 0.7 mm wire. Wrap one piece of wire 8 times around round nose pliers and then bend it as shown in the illustrations. Bend a double loop with the help of round nose pliers as shown in the illustrations and cut off the remaining end with a side cutter. Pull the wire onto one of the cord ends as depicted in the illustrations, wrap the longer end around the cord tightly two times and cut of the rest of the wire off with a side cutter. Repeat this step nine more times for the rest of the cord ends. Cut 10 cm of 0.7 mm wire and bend a double loop at one of the ends. Bend the loop at a right angle using pliers as shown. Replace the pin at the top with the looped wire that was made in step 5. Bend a loop as done in step 5 to close the other end of the wire. Repeat steps 5 and 6 to replace the middle two pins. The lower two pins will later be removed. Cut 12 cm of 0.7mm wire and bend it in the middle. Bend the closed end to form a loop with round nose pliers as shown in the illustrations. Bend another loop in the other direction. Attach the loop formed in previous step as shown in the illustration. Wrap the wire ends around the cord as shown in the magnifi er in this step. Replace the pins with these wire ends by piercing in through the cords. Cut off one of the wire ends with a side cutter leaving one end long. Repeat step 6 to make a double loop on the long wire end. Cut 12 cm of 0.77 mm wire and bend a double loop on to the end with round nose pliers. Now bend a bigger loop on this wire end as shown in the illustration in this step. Remove the pin and attach the wire loop created in the previous step as shown in the illustrations in this step. In order to attach this loop onto the cord you have to wrap the wire once more around the cord as shown in the magnifi er in this step and then pierce through all the other cords with this wire end. Repeat step 6 to make a double loop at the end of the wire shown. Cut 10 cm of 0.3 mm nylon thread and melt a ball at one end with a lighter. Insert 13 Swarovski XILION Beads article 5328 3 mm Jet Hematite onto the nylon thread. Wrap this Bead string around the Fancy Stones art. 4437 and go through the fi rst Xilion Bead 5328. Melt the nylon thread end into a ball as previously done. Cut 10 cm of 0.7 mm wire and bend a loop at one end of this wire. Slide on 1 XILION Bead art. 5328 3 mm, 10 XILION Beads 4 mm and 3 XILION Beads 6 mm (all in Jet Hematite). Make a loop at the other end and cut off the excess wire with a side cutter. Open the loop of the Bead string created in previous step with chain nose pliers and insert it in through the crystal loop created in step 13 and close it as shown in the illustration in this step. Open and insert the 5 mm jump ring through the bead string and through the left and right closings of the cords and then close it with chain nose pliers. Cut ten 10 cm pieces of 0.7 mm wire and repeat step 14 ten more times. Open one of the loops with chain nose pliers and hang it onto the cord end and close the loop. Repeat this step 9 more times to attach all the other crystal strands. 12 /12