General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical operations) assured by silver contacts. Built-in operation indicator (Mechanical, LED), push button, diode surge suppression, varistor surge suppression. Standard models are UL, CSA, SEV, DEMKO, NEMKO, SEMKO, TÜV (IEC), and VDE. Conforming to CENELEC standards. RC+DE N S (VDE) Ordering Information Type Terminal Contact form Internal connection (see note ) With mechanical indicator With mechanical indicator and pushbutton Coil ratings Approved standards Standard Plug-in DPDT Standard MKP-I MKP-S AC (~), DC (=) UL, CSA, Non-standard MKP-I MKP-S SEV, DEMKO, PDT Standard MKP-I MKP-S NEMKO, Non-standard MKP-I MKP-S SEMKO, TÜV MKP-I MKP-S LED Indicator DPDT Standard MKPNj-I MKPNj-S AC (~), DC (=) UL, CSA (see note ) Non-standard MKPNj--I MKPNj--S PDT Standard MKPNj-I MKPNj-S Non-standard MKPNj--I MKPNj--I MKPNj--S MKPNj--S Diode DPDT Standard MKPDj-I MKPDj-S DC (=) UL, CSA (see note ) Non-standard MKPDj--I MKPDj--S PDT Standard MKPDj-I MKPDj-S Non-standard MKPDj--I MKPDj--I MKPDj--S MKPDj--S Varistor DPDT Standard MKPV-I MKPV-S AC (~) UL, CSA Non-standard MKPV--I MKPV--S PDT Standard MKPV-I MKPV-S Non-standard MKPV--I MKPV--I MKPV--S MKPV--S VDE approved DPDT Standard MKP-I-VD MKP-S-VD AC (~), DC (=) UL, CSA, Non-standard MKP-I-VD MKP-S-VD SEV, DEMKO, PDT Standard MKP-I-VD MKP-S-VD NEMKO, SEMKO, Non-standard MKP-I-VD MKP-I-VD MKP-S-VD MKP-S-VD TÜV, VDE LED Indicator DPDT Standard MKPN-I-VD MKPN-S-VD AC (~), DC (...) UL, CSA, VDE approved Non-standard MKPN--I-VD MKPN--S-VD VDE PDT Standard MKPN-I-VD MKPN-S-VD Non-standard MKPN--I-VD MKPN--S-VD MKPN--I-VD MKPN--S-VD
Type Terminal Contact form Internal connection (see note ) With mechanical indicator With mechanical indicator and pushbutton Coil ratings Approved standards Diode Plug-in DPDT Standard MKPD-I-VD MKPD-S-VD DC (...) UL, CSA, VDE approved Non-standard MKPD--I-VD MKPD--S-VD VDE PDT Standard MKPD-I-VD MKPD-S-VD Non-standard MKPD--I-VD MKPD--S-VD MKPD--I-VD MKPD--S-VD Note:. When ordering, add the rated voltage to the model number. Rated voltages are given in the coil ratings table in Specifications. Example: MKP-S 0 VAC Rated voltage. This DC coil comes in two types: standard coil polarity and reversed coil polarity. Refer to Terminal Arrangement/Internal Connections. Example: MKPN-I VDC Reverse polarity. Refer to Terminal Arrangement/Internal Connections for non-standard internal connection.. The gold plating thickness depends on the request. Example: MKP-I AP VAC Gold plating thickness:!m Model Number Legend Standard Models MK - -. Contact Form : DPDT : PDT. Cover P: Dust cover Special Accessories MK - - -. Contact Form : DPDT : PDT. Cover P: Dust cover. Classification N: LED indicator D: Diode V: Varistor ND: LED indicator and diode NV: LED indicator and varistor. Internal Connection Construction Blank: Standard or : Non-standard connection (Refer to Terminal Arrangement/ Internal Connections). Mechanical Indicator Push Button S: Mechanical indicator and push button I: Mechanical indicator. Coil Polarity Blank: Standard : Reverse (Refer to Terminal Arrangement/ Internal Connections). Internal Connection Construction Blank: Standard or : Non-standard connection (Refer to Terminal Arrangement/ Internal Connections). Approved Standards Blank: UL, CSA, DEMKO, NEMKO SEMKO, SEV, TÜV VD: VDE. Rated Voltage (Refer to Coil Ratings). Mechanical Indicator Push Button S: Mechanical indicator and push button I: Mechanical indicator. Approved Standards Blank: UL and CSA only VD: VDE (N and D models only). Rated Voltage (Refer to Coil Ratings) Accessories (Order Separately) Item Model Track-mounted -pin type PF0A-E Socket -pin type PFA-E Hold-down Clip PFC-A
Specifications Coil Ratings UL, CSA, DEMKO, NEMKO, SEMKO, SEV, TÜV Rated voltage Rated current Coil Must operate Must release Max. voltage Power 0 Hz 0 Hz resistance voltage voltage consumption AC V 0 ma 0 ma. " 0% max. of 0% min. of 0% to% of Approx.. VA (~) V ma 0 ma. " rated voltage rated voltage rated voltage (at 0 Hz) Approx.. VA V.0 ma.0 ma.0 " (at 0 Hz) 0 V.0 ma. ma 0 " 0 V. ma. ma,0 " V.0 ma. ma,0 " V.0 ma 0. ma,0 " 00 V. ma. ma,0 " 0 V.0 ma. ma, " 0 V. ma. ma, " 0 V. ma. ma,0 " DC (=) V ma. " % min. of V ma " rated voltage VDE V ma 0 " V. ma,0 " 0 V. ma,00 " V. ma,00 " Rated voltage Rated current Coil 0 Hz 0 Hz resistance AC (~) DC (=) Note: Must operate voltage Must release voltage Max. voltage V 0 ma ma. " 0% max. of 0% min. of 0% to% of V ma ma.0 " rated voltage rated voltage rated voltage V.0 ma. ma 0. " 0 V.0 ma.0 ma 0 " 0 V.0 ma 0. ma, " V. ma.0 ma,00 " V 0.0 ma.0 ma,00 " 00 V. ma. ma, " 0 V. ma. ma,00 " 0 V. ma. ma,0 " 0 V. ma. ma,00 " V ma. " % min. of V ma " rated voltage V.0 ma 0 " V.0 ma,0 " 0 V. ma,0 " V. ma,0 " Approx.. W Power consumption Approx..0 VA (at 0 Hz) Approx.. VA (at 0 Hz) Approx.. W. The rated current and coil resistance are measured at a coil temperature of #C with tolerances of +%/-0% for AC rated current and $% for DC coil resistance.. Performance characteristic data are measured at a coil temperature of #C.. ~ indicates AC and = indicates DC (IEC publications).. For 00 VDC applications, a 0-VDC Relay is supplied with a fixed. k", 0 W resistor. Be sure to connect the resistor in series with the coil.. For models with the LED indicator built in, add an LED current of approximately 0 through ma to the rated current.
Contact Ratings Load Rated load Resistive load (cos% =) A at 0 VAC A at VDC A 0 VAC, 0 VDC A Inductive load (cos% =0.) A at 0 VAC Rated carry current Max. switching voltage Max. switching current Max. switching power,00 VA, 0 W,0 VA Min. permissible load ma at VDC Characteristics Contact resistance Operate time Release time 0 m" max. AC:0msmax.DC:0msmax. 0 ms max. Max. operating frequency Mechanical:,000 operations/hr Electrical:,00 operations/hr (under rated load) Insulation resistance 0 M" min. (at 00 VDC) Dielectric strength,00 VAC, 0/0 Hz for min between coil and contacts;,000 VAC, 0/0 Hz for min between contacts of same polarity, terminals of the same polarity;,00 VAC, 0/0 Hz fro min between current-carrying parts, non-current-carrying parts, and terminals of opposite polarity Vibration resistance Destruction: to Hz,.-mm double amplitude Malfunction: to Hz,.0-mm double amplitude Shock resistance Destruction:,000 m/s (approx. 0G) Malfunction: 0 m/s (approx. G); Life expectancy Mechanical:,000,000 operations min. (at operating frequency of,000 operations/hour) Electrical: Refer to Engineering Data. Ambient temperature Ambient humidity % to % Weight Note: The data shown are initial values. Operating: --#C to0#c (with no icing or condensation) Storage: --#C to#c (with no icing or condensation) Approx. g
Approved Standards The following ratings apply to all models. UL 0 (File No. E)/CSA. No.0/ (File No. LR) Coil ratings Contact ratings Operations tovdc to0vac A, VDC (resistive) A, 0 VAC (resistive) A, 0 VAC (general use) 0,000 cycles SEV, DEMKO, NEMKO tov= to0v~ SEMKO tov= to0v~ Coil ratings Contact ratings Operations A, 0 V~ (NO) (cos% =) A, 0 V~ (NC) (cos% =) A, V= (NO) A,V= (NC) A, 0 V~ (cos% =0.) 0,000 cycles Coil ratings Contact ratings Operations A, 0 V~ (NO) (cos% =) A, 0 V~ (NC) (cos% =) TÜV (VDE 0 Teil 0/0 0, IEC Teil -00/, EN 00/ (TÜV File No.: R0),,,, 0 V=,,, 0, 0,,, 00, 0 0, 0 V~ 0,000 cycles Coil ratings Contact ratings Conditions Operations A, 0 V~ (cos% =) 0,000 cycles A, V= A, 0 V~ (cos% =0.) VDE (VDE 0 Teil 0/0, IEC Teil -00/ ) (VDE File No.: NR 0) IEC --00 Item.. Pollution Degree, Overvoltage Category II Pick up class - class Temperature class - class b Coil ratings Contact ratings Conditions Operations,,,, 0 V=,,, 0, 0,,, 00, 0 0, 0 V~ A, 0 V~ (cos% =) A, V= A, 0 V~ (cos% = 0.) C/0 - class, class C 0,000 cycles
Engineering Data Life expectancy (x operations),000,000,000 00 00 0 0 0 Electrical Life Expectancy 0-VAC inductive load -VDC resistive load 0-VAC resistive load -VAC resistive load Switching current (A) 0 0 0 0 Maximum Switching Power AC resistive load DC resistive load VDC max. AC inductive load 0 0 0 0 00 0000,000 Switching voltage (V) 0 Switching current (A)
Dimensions Note: All units are in millimeters unless otherwise indicated. Relays. max. 0.. max.. max. Accessories (Order Separately) Sockets PF0A-E (Conforming to EN 00) Terminal Arrangement Mounting Holes Eight, M. x sems Two, M or two.-dia. holes max.. $ 0. max.. max. PFA-E (Conforming to EN 00) Eleven, M. x sems Two, M or two.-dia. holes max.. $ 0.. max.. max. Hold-down Clips PFC-A
Mounting Tracks PFP-0N, PFP-0N (Conforming to EN 00) PFP-0N (Conforming to EN 00)..$0. $0. $0.. $0.. * 00 (00)* * This dimension applies to the PFP-0N Mounting Track. 00$. * A total of twelve x. elliptic holes is provided with six holes cut from each track end at a pitch of mm. Mounting Height with Sockets.. MKP-I/-S PF0A(-E) MKP-I/-S PFA(-E)..
Installation Terminal Arrangement/Internal Connection (Bottom View) Standard (AC/DC Coil) MKP-I, -S MKP-I, -S MKP-I, -S MKP-I, -S MKP-I, -S VDE-approved Type (AC/DC Coil) ( ): Dual Numbering MKP-I-VD, -S-VD MKP-I-VD, -S-VD MKP-I-VD, -S-VD MKP-I-VD, -S-VD MKP-I-VD, -S-VD () () () () () () () () () () () () () () () () () () () () () () () (A) (A) () () () () () () () () (A) (A) () () () () (A) (A) (A) (A) () () (A) (A) () () LED Indicator Type (AC Coil) MKPN-I, -S MKPN--I, -S MKPN-I, -S MKPN--I, -S MKPN--I, -S
LED Indicator Type Standard Polarity) MKPN-I, -S MKPN--I, -S MKPN-I, -S MKPN--I, -S MKPN--I, -S (+) (--) (+) (--) (+) (--) (+) (--) (+) (--) LED Indicator Type Reverse Polarity) MKPN-I, -S MKPN--I, -S MKPN-I, -S MKPN--I, -S MKPN--I, -S (--) (+) (--) (+) (--) (+) (--) (+) (--) (+) Diode Type Standard Polarity) MKPD-I, -S MKPD--I, -S MKPD-I, -S MKPD--I, -S MKPD--I, -S (+) (--) (+) (--) (+) (--) (+) (--) (+) (--) Diode Type Reverse Polarity) MKPD-I, -S MKPD--I, -S MKPD-I, -S MKPD--I, -S MKPD--I, -S (--) (+) (--) (+) (--) (+) (--) (+) (--) (+) Varistor Type (AC Coil) MKPV-I, -S MKPV--I, -S MKPV-I, -S MKPV--I, -S MKPV--I, -S
LED Indicator and Diode Type (DC Coil) MKPND-I, -S MKPND--I, -S MKPND-I, -S MKPND--I, -S MKPND--I, -S (+) (--) (+) (--) (+) (--) (+) (--) (+) (--) LED Indicator and Varistor Type (AC Coil) MKPNV-I, -S MKPNV--I, -S MKPNV-I, -S MKPNV--I, -S MKPNV--I, -S VDE Approved Type LED Indicator Type Standard Polarity) ( ): Dual Numbering MKPN-I-VD, --VD MKPN--I-VD, --VD MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN--I-VD, -S-VD () () () () () () () () (A) (A) () () () () (A) (A) () () () () () () () () () () () () () () (A) () (A) () (A) (A) () () () () () () () () () (A) (A) () () (+) (--) (+) (--) (+) (--) (+) (--) (+) (--) VDE Approved Type LED Indicator Type Reverse Polarity) MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN--I-VD, -S-VD () () () () () () () () () () (A) (A) () (A) (A) () () () () () () () () () () () (A) () (A) (A) () () (--) (+) (--) (+) (--) (+) (--) () () () () () () () () (A) (A) () (+) (--) () () () () (A) () (+) VDE Approved Type Diode Type Standard Polarity) MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD--I-VD, -S-VDS () () () () () () () () () () (A) (A) (A) (A) () () () () () () () () () () () () (A) () (A) (A) () () () () () () () (A) () () () (A) () () () () (+) (--) (+) (--) (+) (--) (+) (--) (+) (--) () (A) ()
VDE Approved Type Diode Type Reverse Polarity) MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD-I-VD, -S-VD MKPD--I-VD, -S-VD MKPD--I-VD, -S-VD () () () () () () () () (A) (A) () () () () (A) (A) () () () () () () () () () () (A) () (A) (A) () () () () () () () (A) () () () (A) () (--) (+) (--) (+) (--) (+) (--) (+) (--) (+) () () () () (A) () VDE Approved Type LED Indicator Type (AC Coil) MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN-I-VD, -S-VD MKPN--I-VD, -S-VD MKPN--I-VD, -S-VD () () () () () () () () () () () () () () () () () () () () () () () (A) () (A) () () () () () () () (A) (A) () () () () (A) (A) (A) (A) () (A) (A) () () () ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.0. To convert grams into ounces, multiply by 0.0. Cat. No. J0-E-A