Solid Surfaces. Sanding and polishing solid surface materials chemical-concepts.com

Solid Surfaces Sanding and polishing solid surface materials.800.220.966 chemical-concepts.com

Classic solid surfaces Classic solid surfaces Application recommendations for classical solid surface materials. Preparation: Dressing/Pre-sanding Flatting of scratches, damage, glue residues, sawing and routing marks P20 2. Matte: 2.2 Semi-Gloss: P80 2. High-Gloss: 2.4 Super High-Gloss: Tip: Clean after every sanding operation To achieve high-quality surfaces, the workpiece surface has to be cleaned after every sanding operation. Otherwise the sanding dust can have an abrasive effect that makes it impossible to achieve a high-gloss surface. We therefore recommend that you clean the workpieces after every sanding operation using a microfibre cloth dry or damp. 620 siafleece very fine 620 siafleece P600 620 siafleece ultra fine P600 Dry sanding: P000 7940 siaair K500 P600 Dry sanding: P000 7940 siaair K500 K2000 Tip: Consistent sanding pattern A consistent sanding pattern is achieved by systematically sanding in a grid pattern. As a result, every point on the surface is sanded in equal measure. To prevent scratches on the workpiece surface, do not start the machine until it is resting on the surface. 620 siafleece 620 siavlies micro fine Polish: Lambskin disc + siachrome cut Note: Either series 940 or 950 can be used in grits 20-600. 620 siafleece 2 Your perfect gloss level: matte Your perfect gloss level: semi-gloss Your perfect gloss level: high-gloss Your perfect gloss level: super high-gloss

Products Products at full speed to a perfect surface 7940 siaair patented technology for the perfect finish Mixed grit types, semi-friable aluminum oxide, aluminum oxide Coating: Electrostatic (K040 P600) Special process (P800 P500) Bonding: Synthetic resin Additional coating: Stearate Backing: Paper (K40 P600) Film (P800 P500) Grit range: K40 P500 Coating: Bonding: Backing: Grit range: White aluminum oxide Special process Synthetic resin Knitted fabric with foam backing K240 K4000 One product for the entire grit range of K40 P500 including siasoft High-performance abrasive Homogeneous sanding pattern Longest lifetime Sanding solid surfaces Sanding down and fine sanding solid wood Keying thick layers of varnish Sanding down painted surfaces, primers and fillers Low scratch depth with high stock removal Very long lifetime Highly adaptable to edges and contours Waterproof and washable Ultrafine sanding of solid surfaces and paint Polishing preparation for high-gloss surfaces Sanding of UP and PUR varnishes prior to polishing FiboTec siafast Hook N' Loop Discs 7940 siaair siafast Hook N' Loop Discs FiboTec hole pattern FiboTec 59 hole FiboTec 4 hole 20 2279.590.020 80 2279.590.080 280 2279.590.0280 400 2279.590.0400 600 2279.590.0600 20 4800.667.020 80 4800.667.080 280 4800.667.0280 400 4800.667.0400 600 4800.667.0600 00-min 00-min 500 56.687.500 0-min 2000 56.687.2000 500 465.796.500 0-min 2000 465.796.2000 500 647.2462.500 0-min 2000 647.2462.2000 siafast Hook N' Loop Regular disc 20 72.98.020 80 72.98.080 00-min 280 72.98.0280 400 72.98.0400 600 72.98.0600 000* 72.98.000 50 / 00 20 678.7705.020 80 678.7705.080 00-min 280 678.7705.0280 400 678.7705.0400 600 678.7705.0600 000* 678.7705.000 50 / 00 7940 siaair : Patented Net-Backed Foam System. Net-backed abrasive 2. Foam cushioning. siafast fastening system *Note: 000g is a film disc 4 Please note: Additional grade, size, and hole configurations are available - please call for more information. Please note: Additional 7940 siaair grade and size configurations are available - please call for more information. 5

Products Products 620 siafleece for fast and consistent finishing siachrome Fast, easy, brilliant Structure: Bonding: Backing: Grade: Aluminum oxide, silicone carbide Open, nylon fleece Synthetic resin siafast Very fine, ultra fine, micro fine, Product information Polishes, pads and cleaning cloths are technically coordinated with each other and are color coded. Use the recommended pad and polish combinations to achieve the best result. Consistent sanding pattern Highly flexible, ideal for hard-to-reach areas Long lifetime thanks to dense grit coating Can be used wet or dry Keying and matte sanding solid surfaces, varnishes and paints Removing spray vapor Sanding paintwork treated with stripping agents Sanding profiled and rounded workpieces Complete polishing system consisting of polishes, sealants and pads Consistent color concept for efficient and process-reliable polishing Suitable for hard and soft varnishes and solid surfaces Buffing up varnishes and solid surfaces Removing fine scratches, overspray, and holograms 620 siafleece siafast Hook N' Loop very fine - maroon 245.77.692 ultra fine - gray 245.77.872 micro fine - gold 245.77.99 - white 245.77.00 very fine - maroon 0665.249.692 ultra fine - gray 0665.249.872 micro fine - gold 0665.249.99 - white 0665.249.00 2 25-bulk 2 25-bulk Product Description Dimensions / Contents Article ID Min. / Bulk siachrome cut Abrasive polish with high gloss level 2.2 lbs 0020.666 / 6 Lambskin disc Special disc that provides an exceptional finish 5 /8 0020.6674 2 / 20 /8 0020.667 5 / 20 siachrome polishing pads For use with Lambskin disc 5 0020.274 0020.27 / 0 Premium cloth Ultra plush cloth for cleaning between steps 5 /4 x 5 /4 0020.6670 / 0 very fine - maroon Accessories ultra fine - gray micro fine - gold - white siafast Hook N Loop Backup Pads: 5 /-24 thread Minimum / Bulk /8 thick - firm low profile 7486.5440.0000 / 0 54 hole /8 thick - soft, low profile 0020.674 -min /8 thick - hard, low profile 0020.675 0-bulk 54 hole /2 thick - soft edge 0020.209 -min /2 thick - medium edge 4580.8409.0000 0-bulk /8 thick - soft, low profile 0020.6728 -min /8 thick - hard, low profile 0020.6729 0-bulk Interface Pads Minimum / Bulk 6 Please note: Additional 620 siafleece grade, size, and hole configurations are available - please call for more information. 7 multi hole 0 hole multi hole /8 firm universal hole pattern 7486.5440.0000 /2 soft 0020.5886 /8 firm 8795.89.0000 /2 soft 900.987.0000 /2 firm universal hole pattern 5999.055