No-Ha Invisible Handles By Bellevue New Product for sliding doors, cupboards and drawers Invisible handles have never looked so good and been so practical. Style, design and a clean, smooth look.
38 mm + 27 mm+ 38 mm+ 43 mm + 48 mm + No-Ha by Bellevue - Smart Architectural Products BINS105 & 200 Recessed Flush Pull Technical Data Designed for Sliding doors that fully recess into pockets Made in Europe, both the BINS105 & BINS200 have proved to be a totally reliable products that come with a 2-year guarantee. Made from industrial strength nylon and steel, both the BINS105 & BINS200 have proven to be a winner in reliability, functionality and aesthetic appeal. Suitable for door from 38mm thick to over 55mm + thick, installation of both the BINS105 & BINS200 range are achieved via use of a custom 44mm milling tool. It routs a hole in the door specifically sized for the both units to drop in. No need for the door to be pulled apart, or remove the face of the door. Using the BIZ44 milling tool (available for purchase or rental) fitting can be completed on site or in the factory. With the added benefit of four independent steel springs fixed to the underside of the push plate, you can rest easy knowing it will always bounce back and sit flush with the face of the door. Measurements: - Opening: 87mm x 45mm - Cover plate: 85.5mm x 43.5mm - Note: The cover plate is made to match the surface finish of the door panel and is adhered to the face plate of the BINS200 mechanism. Handle for sliding doors Back to Back Flush Pulls for Sliding Doors BINS200 45 BINS205 45 BINS210 45 32 21 21 38 mm + thick doors 43 mm + thick doors 48 mm + thick doors Single Side Only Flush Pull for Sliding Doors : BINS105 27 mm+ 45 38 mm+ 3 16 21 5 3mm+ 45 3 16 21 5 14mm+ Order Codes: BINS200 - For doors 38-42mm + thick - new BINS205 - For doors 43-47mm + thick - new BINS210 - For doors 48-50mm + thick - new BINS105 - Single Side only - new 2 Bellevue Imports 03 9571 5666 info@bellevueimports.com.au www.bellevueimports.com.au
BINS105 & 200 Recessed Flush Pull - Functional Data Designed for Sliding doors that fully recess into pockets Both the BINS105 & BINS200 Invisible sliding door flush pulls have been specifically designed to provide a clean smooth contemporary look that is not interrupted by the visual appearance of traditional flush pulls or handles. Unlike traditional sliding door hardware the both the BINS105 & BINS200 sit flush with the face of the door, as a result the door will fully recess into the sliding door cavity. Using either the BINS105 or BINS200, the formal architectural composition of a wall and door can now continue without interruption, creating an aesthetically appealing appearance that is truly clean and elegant. By using the veneer of the door and adhering it to the rectangular push plate you can achieve a fully blended flush pull that looks and acts as part of the door. Both the BINS105 & BINS200 are for all intents and purposes invisible, providing you with a beautifully clean solid door face. The BINS200 s beautiful contemporary look is achieved without compromising the functionality of the flush pull. The cavity created when pressing the faceplate in, iranges from a minimum of 32mm through to 43mm deep based on door thickness, providing ample room for even the largest of hands from either side of the door. An additional benefit of the BINS200 s clever design; you can grab the flush pull from any side or position of its rectangular shape. This feature is due to the unit using springs, not a pivot mechanism when pressing the face plate in. 3 Bellevue Imports 03 9571 5666 info@bellevueimports.com.au Bellevue Imports www.bellevueimports.com.au 03 9571 5666 info@bellevueimports.com.au www.bellevueimports.com.au 3
BINK250 Single Technical Data Designed as a invisible pull for Cupboards and Drawers Like its bigger brother the BINS200, the BINK250 is also made in Europe and has proved to be a totally reliable and proven product with a 2-year guarantee. Made from industrial strength nylon and steel the BINK250 has proven to be a winner. Installation of the BINK250 is achieved via use of a custom 44mm milling tool. It cuts a hole in the face of the cupbaord or drawer specifically sized for the BINK250 to drop in. Using the BIZ44 milling tool (available for purchase or rental) fitting can be completed on site or in the factory. With the added benefit of four independent steel springs fixed to the underside of the push plate, you can rest easy knowing it will always bounce back and sit flush with the face of the door. Hinged cupboard doors Sliding cupboard doors Drawers BINK 250 45 45 19 7 24 2 Nylon backplate Measurements : Opening: 87 mm x 45 mm Cover plate: 85.5 mm x 43.5 mm Note: The cover plate is made to match the surface finish of the cupboard or drawer panel and is adhered to the face plate of the BINK250 mechanism BIZ44 Milling Tool Available to buy or rent 4 Bellevue Imports 03 9571 5666 info@bellevueimports.com.au www.bellevueimports.com.au Order Codes: BINK250 - For timber 19-24mm thick - new BIZ44 - Milling Tool - new
BINK250 Single - Functional Data Designed as a invisible pull for Cupboards and Drawers The BINK250 Invisible cupboard and drawer pull has been specifically designed to provide a clean smooth contemporary look that is not interrupted by the visual appearance of traditional cabinet pulls or handles. Unlike traditional handles the BINK250 sits flush with the face of the cupboard and draw, creating an aesthetically appealing appearance that is truly clean and elegant. By using the veneer of the door and adhering it to the rectangular push plate you can achieve a fully blended pull that looks and acts as part of the cupboard or drawer. The BINK250 is for all intents and purposes invisible, providing you with a beautifully clean solid cupboard and drawer face. Designed to used in a horizontal or vertical position, the BINK250 is suitable for almost any opening and closing applications. The BINK250 s beautiful contemporary look is achieved without compromising the functionality of the pull. The cavity that the BINK250 creates when pressing the faceplate in is 19mm deep, providing ample room for even the largest of hands. An additional benefit of the BISK250 s clever design, you can grab the pull from any side or position of its rectangular shape. This feature is due to the unit using springs, not a pivot mechanism when pressing the faceplate in. A clean wall - No Handles Bellevue Imports 03 9571 5666 info@bellevueimports.com.au www.bellevueimports.com.au 5
BIZ44 Milling Tool - Technical Data Designed for BINS and BINK range of invisible handles No longer is it a costly, difficult and time consuming process to fit-off rebated hardware. Not when you have the correct tool for the job. Specifically made for the installation of the No-Ha invisible range of products the BIZ44 milling tool makes the installation process a breeze. No more chiselling or chipping the timber; the BIZ44 is specific to the requirement. The BIZ44 cuts a hole in the timber door and/or face of the cupboard or drawer specifically sized for the BINS200 and BINK250 to drop in. Using the BIZ44 milling tool (available for purchase or rental) fitting can be completed on site or in the factory. With the added benefit of four independent cutting edges, the BIZ44 has been made with multiple uses in mind. The BIZ44 The right tool for the job 6 Bellevue Imports 03 9571 5666 info@bellevueimports.com.au www.bellevueimports.com.au
Notes: Bellevue Imports 03 9571 5666 info@bellevueimports.com.au www.bellevueimports.com.au 7
Please contact us for any of our product catalogues. Bellevue Imports Pty Ltd 954 Glenhuntly Road, Caulfield South, Victoria, 3162 Ph: 1300 369 395 Fax: 03 9571 1347 www.bellevueimports.com.au info@bellevueimports.com.au The catalogue and products may be updated. Registered trademarks and patented designs. All rights reserved No-Ha & Bellevue Imports P/L No-Ha Invisable: Catalogue V2/13