Centrotecnica Test House Environmental Testing Lab - Our capabilities
Centrotecnica Test House Enrvironmental Testing Lab - Our capabilities For Vibration and Shock Testing Name of the equipment Rated Thrust (Kn) (in. / mm pk-pk) Slip Table size (mm) Temperature chamber combination Shaker LDS 895 56 2.5 1200x1200 or 440x440 // Shaker LDS 864 27 2 640x640 or 440x440 // Shaker LDS 850 22 2 640x640 // Shaker LDS 824LS 24 1.2 900x900 // Shaker LDS 824LS (24h/24) 25 1.2 // Available Shaker IMV 240 (24h/24) 24 4 750x750 Available Shaker LDS 730 (24h/24) 9.8 2 // Available Shaker LDS 724 6.8 1 600x600 Available Shaker LDS 455 0.3 0.3 240x240 Available For Shock and Drop testing For Special Testing AVCO SM 220 Equipment (No temperature) AVCO SM 105 Equipment (No temperature) Lo.F.Hi.S. - Low frequency - high stroke and velocity (No temp.) IMV/LDS equipment (No temperature) Drop test machine (No temperature) Qualmark OVTT chamber - HALT testing - 6 DOF vibration* Rain machine for rain tests Vibration system in quiet room for Squeak & Rattle testing Modal Analysis Static accelation testing with special modular centrifuge * POSSIBLE COMBINATION WITH CLIMATIC CHAMBER For Climatic and Altitude Testing Nome of the Equipment Min. Temperature ( C) Min. Temperature ( C) Vol. Humidity Tenney chamber for temperature test -40 140 0,03 // Weiss chamber for climatic test -40 180 0,6 Yes ACS chamber for climatic test -30 100 1,15 Yes Anyvib chamber for climatic test -75 180 1,2 Yes Tenney machine for altitude test Production Unit and Test House: Via F. Confalonieri, 23-20060 Masate (MI) - ITALY
LDS V895 SHAKER WITH HORIZONTAL TABLE LDS V895 electro-dynamic shaker is suited for sine, random, vibration and shock testing in the range of 5-2300 Hz. The system is combined with horizontal slip tables allowing testing on three axis. Two sizes of slip tables are available to fit customers needs (1200x1200 mm and 440x440 mm). The high load capacity of 650 kg allows testing on big mass (fixture and item). The system can reach higher load capacity (up to 1900 kg) by means of a special guided system. Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Satellite components Railway systems Medical and pharma instruments Appliances sub-system Energy components Telecoms equipment Product and package Fig. 2: Detail of fixture mounted on the shaker Fig. 1: V895 shaker with slip table - configuration for testing on horizontal axis LDS 895 SHAKER Armature Sine force (peak) Max acceleration Useful frequency range Internal Load Support Capacity Slip table high force electro-dynamic shaker 440 mm 56 kn 140 g sine / 50 g random 5-2300 Hz 63,5 mm (pk-pk) 650 kg (up to 1900 kg with special guided system) 1200x1200 mm and 440x440 mm Fig. 3: Detail of fixture mounted on the shaker VIBRATION CONTROLLER Channels up to 16 Software Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request.
LDS V864 SHAKER WITH HORIZONTAL TABLE LDS V864 electro-dynamic shaker is suited for sine, random, vibration and shock testing in the range of 5-3000 Hz. The system has a maximum acceleration of 110 g (sine) and 75 g (random). The system is combined with horizontal slip tables allowing testing on three axis. Two sizes of slip tables are available to fit customers needs. The system can reach high load capacity by means of a special guided system. Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Satellite components Railway systems Medical and pharma instruments Appliances sub-system Energy components Telecoms equipment Product and package Fig. 1: V864 shaker combined with slip table (+ fixture) Fig. 2: V864 shaker combined with slip table LDS 864 SHAKER Armature Sine force (peak) Max acceleration Useful frequency range Internal Load Support Capacity Slip table medium force electro-dynamic shaker 440 mm 27 kn 110 g sine / 75 g random 5-3000 Hz 50,8 mm (pk-pk) 500 kg 600x600 mm and 440x440 mm VIBRATION CONTROLLER Channels up to 16 Software Sine, Random, Shock and more* Fig. 3: V864 shaker during a test. Configuration for testing on vertical axis * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request.
LDS V850 SHAKER WITH HORIZONTAL TABLE LDS V850 electro-dynamic shaker is suited for sine and random vibration and shock testing in the range of 5-3000 Hz. The system is combined with a horizontal slip table allowing testing on three axis. Two sizes of slip tables are available to fit customers needs. Shaker has two interchangeble armatures, the smallest one used for high vibration level up to 125 g. Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Satellite components Railway systems Medical and pharma instruments Appliances sub-system Energy components Telecoms equipment Product and package Fig. 2: V850 shaker during a railway vibration testing (vertical axis) Fig. 1: V850 shaker with its horizontal table LDS 850 SHAKER Armature Sine force (peak) Max acceleration (sine peak) Useful frequency range Internal Load Support Capacity Slip table medium force electro-dynamic shaker 440 mm / 240 mm 17,5 kn 60 g / 122 g 5-3000 Hz 50.8 mm (pk-pk) 350 kg 640X640 mm and 440x440 mm Fig. 3: V850 shaker during tests using slip table VIBRATION CONTROLLER Channels up to 16 Software Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request.
LDS V824-335 LS SHAKER COMBINED WITH CLIMATIC CHAMBER WEISS The system composed of LDS V824-335 LS electro-dynamic shaker and climatic chamber is suited for combined test (vibration/temperature) in the range of 5-3000 Hz and temperature in the range of -40 C/+180 C. The chamber with volume of 0,6 m 3 allows the control of humidity too (10% to 95%). Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Satellite components Railway systems Medical and pharma instruments Appliances sub-system Energy components Telecoms equipment Product and package LDS 824-335 LS SHAKER Armature Sine force (peak) Useful frequency range Internal Load Support Capacity Slip table medium force electro-dynamic shaker 335 mm 25 kn 5-3200 Hz 38.1 mm (pk-pk) 450 kg No VIBRATION CONTROLLER Channels up to 16 Setting for chamber Software yes Sine, Random, Shock and combined* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request. CLIMATIC CHAMBER WEISS Temperature range -40 C/+180 C Temperature with climate +5 C/+95 C Thermal gradient 5 C/min Internal Dimension (WxDxH) 940x800x800 mm Humidity control available - from 10% to 95% Fig. 1: V824-335 LS combined with climatic chamber
LDS V824 LS SHAKER WITH HORIZONTAL TABLE LDS V824 LS electro-dynamic shaker is suited for sine and random vibration and shock testing in the range of 5-3000 Hz. The system has a maximum acceleration of 100 g (sine) and 60 g (random). V824 LS shaker is combined with a horizontal slip table allowing testing on three axis. Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Satellite components Railway systems Medical and pharma instruments Appliances sub-system Energy components Telecoms equipment Product and package Fig. 1: Vibration testing in horizontal configuration of 3rd Brake light Fig. 2: V824 LS combined with slip table LDS 824 LS SHAKER Armature Sine force (peak) Max acceleration Useful frequency range Internal Load Support Capacity Slip table medium force electro-dynamic shaker 335 mm 24 kn 100 g sine / 60 g random 5-3000 Hz 38.1 mm (pk-pk) 450 kg 900x900 mm VIBRATION CONTROLLER Fig. 3: V824 LS combined with slip table Channels up to 16 Software Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request.
IMV J240 SHAKER COMBINED WITH CLIMATIC CHAMBER ACS ANYVIB 1200-5 The system composed of the IMV J240-Eco shaker with energy-saving system and the climatic chamber ANYVIB allows to perform combined tests (vibration + climatic) in the frequency range of 5 and 2400 Hz and temperatures between -75 C and 180 C. Furthermore, the chamber, which has got a max. volume of 1200l., allows the control of the humidity from 10% to 95%. The combination of the shaker with the relevant 750x750mm slip table allows to perform test on all 3 axis inside the climatic chamber. IMV J240-CE E;-2405 Fig.1: The complete system during a test Armature Sine force (peak) Max acceleration Useful frequency range Slip table medium force electro-dynamic shaker 335 mm 24 kn (55 Kn in shock) 94 g (215 g in shock) 5-2400 Hz 200 mm (pk-pk) 750X750 mm VIBRATION CONTROLLER Channels up to 16 Setting for chamber yes Software Sine, Random, Shock and more* Fig.2: Testing setup (Detail inside the chamber) * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request. CLIMATIC CHAMBER ACS ANYVIB 1200-5 Temperature range -75 C/+180 C Temperature with climate +5 C/+95 C Thermal gradient 5 C/min Internal Dimension (WxDxH) 1000x1130x1080 mm Humidity control available - from 10% to 98% Fig. 3: Slip table and climatic chamber (detail)
LDS SHAKER V730-335 COMBINED WITH CLIMATIC CHAMBER ACS UY 1200 VT The system composed is composed of a LDS 730-335 Shaker and a climatic chamber and allows to perform combined test (vibration and temperature) with a frequency range of 5-3000 Hz and a temperature range of -30 C- 100 C. Furthermore, the chamber, which has a max. volume of 1200l., allows the control of the humidity from 10% to 95%. Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Satellite components Railway systems Medical and pharma instruments Appliances sub-system Energy components Telecoms equipment Product and package LDS SHAKER V730-335 Armature Sine force (peak) Max acceleration Useful frequency range Velocity medium force electro-dynamic shaker 335 mm 8.9 kn 75 g 5-3000 Hz 50.8 mm (pk-pk) 2 m/s VIBRATION CONTROLLER Channels up to 16 Setting for chamber Software yes Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request. Fig. 1: Complete system during a test CLIMATIC CHAMBER ACS UY 1200 VT Temperature range -30 C/+100 C Thermal gradient 4m C/min Internal Dimension (WxDxH) 1000x995x1190 mm Humidity control available - from 10% to 95% Fig. 2: Set up inside climatic chamber, detail
LDS V724 SHAKER WITH HORIZONTAL TABLE LDS V724 electro-dynamic shaker is suited for sine and random vibration and shock testing in the range 5-4500 Hz. The system has a maximum acceleration of 94 g (sine) and 50 g (random). V724 shaker is combined with a horizontal slip table allowing testing on three axis. Possible combination to climatic chamber. Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Medical and pharma instruments Appliances sub-system Energy components Telecoms equipment Product and package Fig. 2: V724 shaker during vibration testing (with item) Fig. 1: V724 shaker with slip table LDS V724 SHAKER Armature Sine force (peak) Max acceleration Useful frequency range Internal Load Support Capacity Slip table low force electro-dynamic shaker 180 mm 6,8 kn 94 g (sine) - 50 g (random) 5-4500 Hz 25.4 mm (pk-pk) 220 kg 600x600 mm Fig. 3: V724 shaker during tests with slip table VIBRATION CONTROLLER Channels up to 16 Software Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request. Fig. 4: V724 - detail of accelerometers positioning
LDS V455 SHAKER WITH HORIZONTAL TABLE LDS V455 electro-dynamic shaker is suited for sine and random vibration and shock testing in the range 5-9000 Hz. The system has a maximum acceleration of 70 g (sine) and 70 g (random). V455 shaker is combined with a horizontal slip table allowing testing on three axis. Possible combination to climatic chamber. Fig. 2: V455 shaker in a special configuration Fig. 1: V455 shaker with EST table 240x240 LDS V455 SHAKER Armature Sine force (peak) Max acceleration Useful frequency range Internal Load Support Capacity Slip table low force electro-dynamic shaker 63,5 mm 0,3 kn 70 g (sine) - 70 g (random) 5-9000 Hz 19 mm (pk-pk) n.a. 240x240 mm VIBRATION CONTROLLER Fig. 3: V455 shaker with triaxial fixture for triaxial accelerometers calibration (+ item to calibrate) Channels up to 16 Software Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request.
HYDRAULIC SHAKER IN QUIET ROOM FOR SQUEAK & RATTLE TESTING Hydraulic Shaker conceived to obtain the maximum versatily of use. It allows to perform classical vibration testing and to mount structures to support the fixed borders of the tested items. A further setup my the means of load cells, allows to measure the dynamic features of various materials; we can in fact track the K dynamic curve of a damper and to measure the entire matrix of a joint as well. This low noise shaker is located in a quiet room to fulfill Squeak & Rattle detection testings. The large dimensions of the room are suitable for testing either components or the entire vehicle. The shaker can be controlled in acceleration, velocity, displacement and can perform 24/24h tests for long duration; these features make the shaker perfect to perform fatigue testings too. Fig.1: Hydraulic shaker during a S&R test HYDRAULIC SHAKER Force (peak) Useful frequency range Hydraulic shaker 10 kn 0,1-300 Hz 50 mm (pk-pk) Fig.2: Quiet room VIBRATION CONTROLLER Channels up to 16 Software Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request. QUIET ROOM Internal Dimension (WxDxH) Noise reduction Background noise 6x4,2x3,15(h) mt 40 db 35 db Fig. 3: Hydraulic shaker measuring the dynamic matrix of a flexible hose
Lo.F.Hi.S. Low Frequency High Stroke and Velocity Shaker New vibration system based on the new linear motor technology. Thanks to the very long stroke and to the high reachable velocity is possible to perform half-sine shock test (20 g) with long duration (up to 100 ms). Suited for testing: Seismic testing Naval systems Avionics assembly Railway components The system alllows to reach very low frequencies with no distortion even since 0,1 Hz. Fig. 2: Lo.Fi.S. System during a test Fig. 1: Innovative linear engine technology for very long stroke, high velocity and low frequencies Lo.F.Hi.S. Mobile table mass Max force (peak) Max velocity Useful frequency range Table specially designed machine 38,7 Kg 12 kn 6.6 ms 0-500 Hz 850 mm 1000x850 mm Fig. 3: System during a testing - devices can be power supplied even under environmental testing VIBRATION CONTROLLER Channels up to 16 Software Half-sine shock
CENTROTECNICA TEST HOUSE FACILITIES AVCO 220 SHOCK TEST MACHINE Our AVCO 220 Shock Test Machine allows to perform mechanical shock testing with half sine waveform, pulse duration up to 14 m/s and acceleration up to 1500 g. The system is manly used in the design and destructive testing of components, circuits, hybrids, and complete assemblies. Suited for testing in compliance with: Industrial specifications, individual test requirements and military i.e.: MIL-STD-202, MIL-STD-750, MIL-STD-810 MIL-STD-883 (In case Customer needs to perform acceleration with higher duration and amplitude, we can customize testing by the means of special equipment) AVCO 220 SHOCK MACHINE shock machine Generated waveform half-sine Max acceleration 1500 g Pulse duration 0,3-14 m/s 530 mm (pk-pk) Channels 8 Internal Load Support Capacity 180 kg Max Velocity 8,38 m/s Fig. 1: Avco 220, test set-up Fig. 2: Avco 220, test set-up Fig. 3: Avco 220, test set-up
CENTROTECNICA TEST HOUSE FACILITIES AVCO 105 SHOCK TEST MACHINE Our AVCO 105 Shock Test Machine allows to perform mechanical shock testing with half sine waveform, pulse duration up to 14 m/s and acceleration up to 1500 g. The system is manly used in the design and destructive testing of components, circuits, hybrids, and complete assemblies. Suited for testing in compliance with: Industrial specifications, individual test requirements and military i.e.: MIL-STD-202, MIL-STD-750, MIL-STD-810 MIL-STD-883 (In case Customer needs to perform acceleration with higher duration and amplitude, we can customize testing by the means of special equipment) AVCO 105 SHOCK MACHINE shock machine Generated waveform half-sine Max acceleration max 1500 g Pulse duration 0.2-25 m/s 450 mm (pk-pk) Channels 8 Internal Load Support Capacity 22 kg Max Velocity 8,38 m/s Fig. 2: Avco 105 Fig. 1: Avco 105, test set-up
IMV/LDS SHOCK TESTING SYSTEM IMV/LDS Shaker has been especially designed for shock testing; it allows in fact a long displacement and high velocity. The long displacement perfectly fulfils shock testing standars. With IMV/LDS shaker we can perform vibration testing in the frequency range of 5-2000 Hz. Suited for testing: Automotive parts and systems qualification Electronic assembly, computer equipment Avionics and military hardware Satellite components General stress screening Product and package The combination of the shaker with his slip table 330x330 mm allows testing on three axis. IMV/LDS SHOCK TESTING SYSTEM Sine force (peak) Max acceleration (sine peak) Useaful frequency range Max Displacement Velocity Slip table medium force electro-dynamic shaker 9.8 kn 166 g 5-2000 Hz 200 mm (pk-pk) 4 m/s 330X330 mm VIBRATION CONTROLLER Channels up to 16 Software Sine, Random, Shock and more* * Shock SRS, Resonant search and tracked dwell, Random-on-Random, Sine-on-Random and other on request. Fig. 1: Shaker IMV/LDS during a test Fig.2: Shaker IMV/LDS during a test on a horizontal axis Fig.3 Shaker IMV/LDS during test on vertical axis
DROP TEST MACHINE We developed a special design drop test machine in order to allow dropping from very low heights. What makes the difference is the drop platform that pass trough the impact surface. Our Drop Test Machine meets a large variety of test standards. Suited for testing: Drop testing helps customers to improve packaging solutions. Only simulating drop events occuring to your packaged products you can build better protection systems, and monitor the performances of your package designs. Edge drop orientation can be accomplished by means of a special adapter. DROP TEST MACHINE Max object size* (item to be tested) Min.drop height Max drop height specially designed machine for drop tests 900x980 mm 10 mm 1500 mm * We can arrange drop testing even in case of object of larger size or volume by means of a release hook. Fig. 2: Drop Test Machine Fig. 1: Drop Test Machine during packaging testing Fig. 3: Drop Test Machine during packaging testing (Note:special fork)
TENNEY T5 ST ALTITUDE CHAMBER Thanks to this chamber, Centrotecnica can perform altitude test conforming the most important standands. Our Tenney s Altitude Chamber simulates altitudes up to 45.000 feet. The workspace size allows to test items up to 700(W)x900Dx760H mm dimensions. Suited for testing : Avionics, military and satellite components Electronic assembly, computer equipment, general packaging shipped via air freight Automotive parts and systems where simulating mountainous conditions The chamber has a very precise operating systems thus providing the exacting performance and a high degree of reliability for Customers altitude testing needs. Items can be tested even in case of electrical connections; on one side of the chamber there are holes allowing electrical power supply of the object. TENNEY ALTITUDE CHAMBER Altitude (max) Internal Dimension (WxDxH) Exterior (WxDxH) 45.000 ft 700x900x760 mm 1250x2100x2300 mm Fig. 2: Altitude chamber, view from inside Fig. 1: Altitude chamber, view from inside with the item to test
CENTROTECNICA TEST HOUSE FACILITIES WEISS WK600/40/5/v TEMPERATURE AND HUMIDITY CHAMBER Thanks to our Weiss test chamber we can perform temperature only or temperature and humidity test enclosure combined. The limited variation in temperature and humidity within the test space is the accurate available today due to the state of the art. Suited for climatic testing: Electronics Automotive Military Aeronautics and aerospace Plastic and rubber materials The climate and temperature working ranges comply with all relevant testing standards such as DIN, ISO, MIL, IEC and ASTM. The chamber has a Pc remote control. CLIMATIC CHAMBER WEISS Temperature range -40 C/+180 C Temperature with climate +5 C/+95 C Thermal gradient 5 C/min Internal Dimension (WxDxH) 940x800x800 mm Humidity control available - from 10% to 95% Fig. 1: Weiss chamber for climatic testing Fig. 2: Weiss chamber for climatic testing Fig. 3: Weiss chamber - inside view
TEMPERATURE AND HUMIDITY CLIMATIC CHAMBER ACS UY 1200 VT This climatic chamber performs temperature only or temperature and humidity test enclosure combined. The limited variation in temperature and humidity within the test space is the accurate available today due to the state of the art. Suited for climatic testing: Electronics Automotive Military Aeronautics and aerospace Plastic and rubber materials The climate and temperature working ranges comply with all relevant testing standards such as DIN, ISO, MIL, IEC and ASTM. The chamber has a Pc remote control. CLIMATIC CHAMBER ACS UY 1200 VT Temperature range -30 C/+100 C Thermal gradient 4m C/min Internal Dimension (WxDxH) 1000x995x1190 mm Humidity control available - from 10% to 95% Fig. 1: Climatic chamber
THEMPERATURE AND HUMIDITY CLIMATIC CHAMBER ACS ANYVIB 1200-5 This climatic chamber performs temperature only or temperature and humidity test enclosure combined. The limited variation in temperature and humidity within the test space is the accurate available today due to the state of the art. Suited for climatic testing: Electronics Automotive Military Aeronautics and aerospace Plastic and rubber materials The climate and temperature working ranges comply with all relevant testing standards such as DIN, ISO, MIL, IEC and ASTM. The chamber has a Pc remote control. Furthermore, the chamber, which has got a max. volume of 1200l., allows the control of the humidity from 10% to 95%. CLIMATIC CHAMBER ACS ANYVIB 1200-5 Temperature range -75 C/+180 C Temperature with climate +5 C/+95 C Thermal gradient 5 C/min Internal Dimension (WxDxH) 1000x1130x1080 mm Humidity control available - from 10% to 98% Fig.1: Climatic chamber - ouside view Fig.2: Testing setup (Detail inside the chamber)
TENNEY JR. TN40 - TEMPERATURE CHAMBER This temperature chamber performs temperature only or temperature and vibration test enclosure combined. The limited variation in temperature within the test space is the accurate available today due to the state of the art. Suited for climatic testing: Electronics Automotive Military Aeronautics and aerospace Plastic and rubber materials The chamber has a Pc remote control. TEMPERATURE CHAMBER TENNEY JR. TN40 Temperature range Thermal gradient Internal Dimension (WxDxH) -40 C/+140 C 10 C/min 275x380x300 mm Fig.1: Temperature chamber
QUALMARK OVTT 18 Highly Accelerated Life Testing (H.A.L.T.) The OVTT, Omni-Axial Vibration Table Top system, is a stand-alone, compact, repetitive-shock vibration system. The OVTT system is ideal for No Fault Found (NFF) precipitation screens of field returns, repair verification and random vibration test of small products. Suited for testing: Automotive parts and systems Electronic assemblies, computer equipment Avionics and military hardware Satellite components General stress screening The OVTT 18 utilizes Qualmark s patented six-degree-of-freedom vibration technology and is designed with reduced air requirements and low noice levels. The OVTT 24 can be configured for placement inside a thermal chamber for combined tests with thermal ranges of -50 C to +150 C. QUALMARK OVTT TM Standard featurings Work space Acceleration Table dimensions Table Capacity Actuators Electronic consolle and PC controller Vibrating table PLC Allen-Bradley Control 508 w x 508 d x 242 h mm 5-40 grms (10 Hz - 5000 Hz) 457x457 mm 23 Kg recommended 45 Kg max load 4 Lubricant Free Fig. 1: OVTT overview Fig. 2: OVTT during a test Fig. 3: OVTT during a test
MODULAR CENTRIFUGE SYSTEM The 6 meter Centrifuge is a special system for static acceleration test allowing the rotation of a load capacity of 70 kg. The system can reach a maximum static acceleration of 20 g. Suited for testing: Satellite components Geotechnical loads Sensing devices Military components Thanks to the modular concept and its accuracy, Centrotecnica Centrifuge is suited for a wide range of components. During rotation the items can be power supplied thansk to slip rings. Beside that, the target acceleration can be reached rising with a specific gradient setted in the motor electronic control. MODULAR CENTRIFUGE SYSTEM Max diameter Max static acceleration Max rotation velocity Max payload specially designed machine 6 mt 20 g 150 rpm 70 kg Fig. 2: Centrifuge System with interface plate Fig. 1: Centrifuge System with interface cube