Skills Development Provider Accreditation Checklist Quality Council SDP Name: Centre Manager Name SDP Contact Details SDP Physical Address e.g. 17 Tonga-tinge Street, Mable Hall, 1612 Facilitator/Lecturer Name Facilitator/Trainer qualification relevant to the trade SME Name SME Employer Details SME Employer contact Ratio of candidates to Assessor e.g. 12 Candidates:1 Facilitator No. of Candidates per given time in the Venue Accreditation History (If previously accredited through the SETA System, Complete the section below ) Accredited by: SETA Name Accreditation No. Accreditation Visit Date: DD/MM/CCYY OFO Code (if applicable) Province e.g. Northern Cape Municipality e.g. Madibeng New Accreditation Information Knowledge X Practical Skills X OFO Code Specialization /Alternative Title Legacy Trade New Trade SAQA ID Signature: Page 1 of 8 Date revised 23/02/2016
Urban X Rural X Audit Visit Date DD/MM/YYYY Index of Tasks: 1. Glazing 2. Stain and varnish 3. Roof 4. Ceiling 5. Wall surfaces - P.V.A. (Brush/Roller) - Enamel Dado (Brush/Roller) 6. Window/Door frame/door 7. Colour matching 8. New surfaces 9. Old surfaces 10. Scaffolding 11. Wall covering NB: SME must ensure that all equipment were tested and found in good working condition for SDP! Hand tools Ratio Y N Comments Plumb bob 1:1 * Mixing Stick 1:1 * Scissors 200 mm 1:1 * Seam roller 1:1 * Pencil 1:1 * Paint brush (12-200 mm) 1:1 * Roller 200 mm, sheep skin and more hair roller 1:1 * Stanley knife 1:1 * Lining Fitch brush 1:1 * Radiator brush 1:1 Wall covering brush/perspex(200*300 mm) 1:1 * Steel brush 1:1 * Duster brush 1:1 Chalk line 1:1 * Working Pots 1:1 * Scrapper(25-100 mm) 1:1 * T square (1 500 2 000 mm) 1:1 * Signature: Page 2 of 8 Date revised 23/02/2016
Glass cutter 1:1 * Wood Chisel 1:1 * Claw hammer 1:1 * Steel Chisel 1:1 * Blow lamp 1:2 * Spirit level 1:1 * Set of spanner 1:1 * Cordless cutter 1:1 Suction pad (2) 1:1 * Glass pliers 1:1 * Putty knife 1:1 * Portable drill machine Portable belt sender Special Tools Measuring Equipment Tape measure 3 m or 5m 1:1 * Signature: Page 3 of 8 Date revised 23/02/2016
Machinery Equipment s (Long Term Consumables) Scaffolding * Step ladder 1 250 mm * Step ladder 1 850 mm * Ladder 4 260 mm * Ladder (Roof) * Safety Safety boots/shoes or Protective flab 1:1 * Safety helmet 1:1 * Signature: Page 4 of 8 Date revised 23/02/2016
Protective clothing 1:1 * Leather gloves 1:1 * Dust mask 1:1 * Gloves (rough) for glass 1:1 * Gloves (smooth) for paint removing 1:1 * Goggles 1:1 * Safety belt 1:1 * Storage for flammable material * I, (manager of the trade test centre / skills development provider) hereby commits to comply with all the relevant OHS regulations and sections applicable to this specific trade. Signature and date Consumables Sandpaper (80 and 60 grit) Master Putty Turps Stain Varnish Woodfiller Steelwool Paint remover Spirit of salt Water Etch primer Signature: Page 5 of 8 Date revised 23/02/2016
Zinchromate/Galvogrip/Culcium plumbate Polyfiller PVA paint Universal undercoat Enamel paint (3 different colours) Anneal Glass Mirrow Screw Masking tape Safety glass Obscure glass Motton cloth Spots sheet Sylicon for mirror Heavy duty glue Pattern wall paper / Wall covering Mirrow tape Filler coat PVA Rust Remover Paraffin Telescopic Stick Binder-m glue/wood glue Sending Sealer Stoep paint Pink wood primer/wood primer Bonding liquid Plaster primer Sugar soap Masonite board Chip board Rhino board Soft board Non-ferrous/ferrous Signature: Page 6 of 8 Date revised 23/02/2016
PVC Surface Assessment aids Cutting table Wall paper table Round/semi-circle window frame House (standard) for wall, ceiling and roof. Wooden window frame 500 x 1000 mm with (440 x 285 panes) Steel window frame 1030 x 1265 mm (8 glasses) Wooden plank 300 x 500 mm LOGISTICS AND LAY-OUT Cubicles (2 500 X 2 500 mm) proportional to the number of candidates/rooms Workshop for practical component Signature: Page 7 of 8 Date revised 23/02/2016
I the undersigned, hereby declare that all the tools/equipment/training materials/machines were checked and are the sole property of the SDP. Signature.. Accreditation recommended Yes No Constraints/Gaps: Recommendations: SME Name Signature Organizational Rep. Name Designation Signature Date: DD/MM/YYYY Date: DD/MM/YYYY Signature: Page 8 of 8 Date revised 23/02/2016