More to Prior than meets the eye. Nikon. Automation Guide. Nikon Automation Guide

More to Prior than meets the eye Nikon Automation Guide Nikon Automation Guide www.prior.com

Introduction This brochure is designed to provide an overview of the equipment we produce for a range of Nikon microscopes. Please note that the equipment in this guide is not an exhaustive list and instead shows the more common products that can be mounted on these microscopes. Additionally, other Nikon microscopes can have Prior equipment added to them. More information about our products can be found by contacting a Prior representative, emailing uksales@prior.com or by visiting www.prior.com. We also have an extensive collection of datasheets which are freely available on our website (www.prior.com), or via contacting Prior Scientific. The parts to be selected will depend both upon the microscope make and the end-user s application. We highly recommend contacting a Prior Sales Manager before ordering. At the end of this guide you will find a short explanation of our stage codes. 1 Nikon Automation Guide

Contents Nikon FN1 3 Nikon Ti/Ti2 7 Nikon Ni (Focussing Stage) 11 Nikon NI (Focussing Nosepiece) 15 Nikon AZ100 19 Nikon SMZ 18/25 23 Nikon LV100 and LV150 27 Nikon L200 and L300 31 Nikon TS2R 35 Nikon Ci 39 Nikon MA100 43 Nikon MA200 45 Nikon ProZ Stand 49 Stage Guide 53 Products listed in green on the systems charts require the ProScan III Control System to be operated Please note that the parts may vary in availability and part numbers and specifications may change without warning. Whilst we have attempted to verify that the information here is accurate, we cannot guarantee that it is completely up to date and error free; thus we suggest contacting Prior before ordering in order to ensure that all equipment will be compatible with your microscope and suitable for your application. The microscopes featured here are for illustrative purposes only. All intellectual property relating to these microscopes, including patents and trademarks, remain the property of their respective owners. Nikon is a registered trademark of Nikon Corporation. ProScan, OptiScan and ZDeck and the Prior Scientific logo are registered trademarks of Prior Scientific Ltd. The 5 year warranty applies to stages used only with a Prior controller, for full details, terms and conditions of the warranty please visit www.prior.com. This document is Prior Scientific 2017. Nikon Sales Brochure July 2017 V.1.6. 2 www.prior.com

Nikon FNI Slide Loader - PL200 1 - PL238 2 OR PL228 2 - PL304 - PL310 Post Sample Holder - HZP1000 - HZP1010 - HZP1020 HZP Post Mounts - HZP150 - HZP200 - HZP250 - HZP300 Translation Stage - ZDP50T - ZDP50K Sample holders - H224LP - H224PLP - H234LP Motorised stages - H101NFN - HIP4NFN - HEP4NFN - PL101NFN - PLE01NFN Z-Deck Sample Holders - HZ202 - HZ203 (HZ201 adapter Z-Deck - ZDN12MP - ZDN12ME - ZDN12MK - ZDN12MF NanoScanZ 3 - NZ200F 3 Nikon Automation Guide

Nikon FNI Lumen 200 - L220SNI - L200SNI Lumen 100 - L100###NI (Replace ### with wavelength) Filter wheels - HF108A/HF220 (Excitation) - HF110A/HF220 (Excitation) Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Shutters - HF200HT (Excitation) - HF201HT (Excitation) Brightfield - LDB103NI - LDB10FNI Joystick Control Unit - PS3J100 Lumen 200 - L220NI - L200NI Focus Motor - NIKRFK + NIKFN1MA - NIKRFK + NIKFN1EK -PS3H122R + H3940 4 www.prior.com

Nikon FNI Product ES10ZE H101NFN H1P4NFN H224LP H224PLP H234LP HEP4NFN HF108A/HF220 HF110A/HF220 HF200HT HF201HT HZ201 HZ202 HZ203 H3940 HZP150 HZP200 HZP250 HZP300 HZP1000 HZP1010 HZP1020 L100###NI L200NI L200SNI L220NI L220SNI Details Focus only controller H101A stage with 2mm screw pitch and 200 step motor H101A stage with 1 mm screw pitch and 400 step motor Low profile slide holder Low profile slide holder (71 x 51 mm slide holder) Low profile slide holder for 4 71 x 21 mm slides H101A stage with 1mm screw pitch, 400 step motor and encoders 8 position 32 mm filter wheel with adapter 10 position 25 mm filter wheel with adapter High speed shutter with 25 mm aperture High speed shutter with 32 mm aperture Adapter allowing upright sample holders to be inserted into Z-Deck Solid Insert Plate for Z-Deck 108 mm ring insert plate for Z-Deck Adapter to connect PS3H122R focus motor to FN1 microscope Rigid post mount 150 mm tall Rigid post mount 200 mm tall Rigid post mount 250 mm tall Rigid post mount 300 mm tall Manipulator holder for HZP150/200/250/300 Standard sample holder for HZP150/200/250/300 Circular holder for HZP150/200/250/300 Single LED illumination system. Replace ### with wavelength required. Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter. Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths 5 Nikon Automation Guide

Nikon FNI Product Details LDB102NI Brightfield Illumination LED for Nikon (standalone) LDB103NI Brightfield Illumination LED for Nikon (ProScan control) NIKFN1EK Adapter for Nikon FN1 for NIKRFK (encoded) NIKFN1MA Adapter for Nikon FN1 for NIKRFK NIKRFK Nikon remote focussing kit - includes controller, cables and focus motor NZ200F NanoScanZ (adapted for flat top stages) PL200 Slide Loader PL228 Bevel edged sample holder for 1 x 3 slides. Includes 4 slide racks for for 1 x 3 slides PL238 Bevel edged sample holder for 2 x3 slides. Includes 2 slide racks for 2 x 3 slides PL310 Elevated baseplate to improve clearance PL304 Barcode reader for PL200 PL101NFN H101A stage for use with slide loader PLE01NFN Encoded H101A stage for use with Slide Loader (use with PL228 only) PS3J100 Multifunctional manual joystick for ProScan PS3H122R Generic focus motor; requires H3940 focus adapter. V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input ZDN12MP Motorised Z-Deck quick adjust platform system ZDN12ME Motorised Z-Deck quick adjust platform system (Encoded) ZDN12MK Manual Z-Deck quick adjust platform system ZDN12MF Fixed plate Z-Deck quick adjust platform system ZDP50K Translation stage for microscope (manual) ZDP50T Translation stage for microscope (motorised). Includes OptiScan controller Notes 1) The slide loader can only be used with the PL101FN or PLE01FN stages 2) The PLE01FN is only for use with the PL228 3) The NZ200F can only be used with the Z-Deck 6 www.prior.com

Nikon Ti/Ti2 NanoScanZ Sample holders - NZ303 (NZ400) - NZ302 (NZ400) - NZ301 (NZ400) NanoScan Z stages - NZ400 Sample holders - H473XR - H223XRNC - H229XR -H224XRLP NanoScanZ Incubation Chambers - W3719 (NZ400) Motorised stages - H117P1N4 - H117E1N4 Option to add H117ACCM Incubation chambers - W4184 Linear stages - HLD117NN (HLD324 adapter required for use of Prior Sample Holders) Well Plate Loader - PLW20N - PLW106 H139 Sample holders - H171XR - H223XR2 - H473R3 Two wellplate stages - H139P1NN - H139E1N5 7 Nikon Automation Guide

Nikon Ti/Ti2 Brightfield - LDB103NI - LDB102NI Nikon Ti Hub Integration kit - LDBNHUB Lumen 100 - L100###NI (Replace ### with wavelength) Lumen 200 - L220SNI - L200SNI Filter wheels - HF110A + HF220 (Excitation) - HF110A + HF255 (Emission) - HF108A + HF248 (Emission) - HF108A + HF220 (Excitation) - HF6NTK (Motorised turret) - HF110/32A + HF220 (Excitation) - HF110/32A + HF255 (emission) Shutters - HF200HT (Excitation) - HF201HT (Excitation) - HF202HT + HF220 (Excitation) - HF204HT + HF220 (Excitation) Lumen 200 - L220NI - L200NI Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF - VLD31XYZ - VLD31XYZEF Focus Motor - PS3H122R + H2975 / H122KON Joystick Control Unit - PS3J100 8 www.prior.com

Nikon Ti/Ti2 Product ES10ZE ACCM H117E1N4 H117P1N4 H139P1NN H139E1N5 H171XR H122KON H223XRNC H223XR2 H224XRLP H229XR H473XR H473XR3 HF108A/HF220 HF110A/HF220 HF110A/HF255 HF108A/HF248 HF11032A/HF220 HF11032A/HF255 HF200HT HF201HT HF202HT/HF220 HF204HT/HF220 HF6NTK HLD117NN HLD324 HLW223XR L100###NI L200NI L200SNI L220NI L220SNI Details Focus only system controller Extension plates for H117 stages H117 motorised stage with 1mm screw pitch and encoders H117 motorised stage with 1mm screw pitch H139 motorised stage with 1 mm ballscrew, 400 stepper motor H139 motorised stage with 1 mm ballscrew, 400 stepper motor and 50 nm encoder 9 Slide holder for H139 Direct fine focussing kit for Nikon and Olympus Microscopes Extra recessed low profile microtitre plate for H117 stages 2 micro titre plate holder from H139 Extra recessed low profile slide holder for H117 stages Extra recessed petri dish holder for H117 stages Extra recessed low profile universal holder for H117 stages Double Universal Sample Holder for H139 Filter wheel holding 8 32 mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Emission) Filter wheel mounted underneath nosepiece (Emission) Filter wheel holding 10 32 mm filters with adapter (Excitation) Filter wheel holding 10 32 mm filters with adapter (Emission) High speed shutter with 25mm aperture for use with filter wheel High speed shutter with 32mm aperture for use with filter wheel High speed shutter with 25mm aperture for stand alone use, with adapter High speed shutter with 32mm aperture for stand alone use, with adapter Upgrade to motorised turret allowing control via ProScan Linear motor stage with travel range of 81 x 121 mm and 50 nm encoders Required to adapt linear stages for Prior insert Required to adapt linear stages for the PLW20. Check with Nikon for condenser and objective compatibility Single LED illumination system. Replace ### with wavelength required Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter and with extended UV/IR wavelengths 9 Nikon Automation Guide

Nikon Ti/Ti2 Product LDB102NI LDB103NI LDBNHUB NZ301 NZ302 NZ303 NZ400 PS3H122R/H2975 PS3J100 PLW106 PLW107 PLW20 V31F V31XYZE V31XYZEF VLD31XYZ VLD31XYZF W3569 W3719 W4184 Details Brightfield Illumination LED for Nikon (standalone) Brightfield Illumination LED for Nikon (ProScan control) Integrates the Brightfield into the Nikon Ti Hub Extra recessed well plate holder for NZ400 Extra recessed slide/petri dish holder for NZ400 Extra recessed slide holder for NZ400 Nanopositioning piezo Z stage with 400 um of travel and controller Focus drive and adapter Multifunctional manual joystick for ProScan Barcode reader for Well Plate Loader Kit to raise Nikon Ti E to correct level when using PLW20 Well Plate Loader ProScan Controller with three stepper drives for filters, shutters or a focus drive ProScan Controller with X Y Z drives and encoder capability ProScan controller with XYZ drives, three filter wheel drives, three shutter drives and encoder capability ProScan controller with XYZ drives for linear stage control ProScan controller with XYZ drives, three filter wheel drives, and three shutter drives for linear stage control Incubation chamber for NZ100/200 Incubation chamber for NZ400 Incubation chamber for H117 stages Notes Depending on the exact variant of Ti/Ti2, some Prior parts may not be compatible. Please contact Prior before ordering with the exact variant of microscope. 10 www.prior.com

Nikon Ni Focussing Stage Sample holders - H224LP - H234LP Motorised stages 3 - H101E50/E80 (dependent on substage) - HIP4E50/E80 (dependent on substage) - HEP4E50/E80 (dependent on substage) - PL101E50/E80 (dependent on substage) - PLE01E50/E80 (dependent on substage) Slide Loader - PL200 1 - PL238 2 OR PL228 2 - PL304 - PL310 Sample holder adapter H3848 Flat top Motorised stages 3 - H101E1CI/NI (dependent on substage) - H101P1CI/NI (dependent on substage) - H101P2CI/NI (dependent on substage) -H101E2CI/NI (dependent on substage) Sample holders (Flat top) - H224F - H234F 8 Slide Stage 3 - H138E50/E80 (dependent on substage) - HE38E50/E80 (dependent on substage) NanoScanZ 4 - NZ200F Sample holders (H138A) - H238LP - H238PLP - H239 11 Nikon Automation Guide

Nikon Ni Focussing Stage Lumen 200 - L220SNI - L200SNI Filter wheels - HF108A/HF220 (Excitation) - HF110A/HF220 (Excitation) Lumen 100 - L100###NI (Replace ### with wavelength) Brightfield - LDB103NI - LDB102NI Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Lumen 200 - L220NI - L200NI Shutters - HF200HT (Excitation) - HF201HT (Excitation) Joystick Control Unit - PS3J100 Focus Motor - PS3H122R + H122KON + H3940 - NIKRFK + NIKNIMA 12 www.prior.com

Nikon Ni Focussing Stage Product ES10ZE H101E50/E80 H101E1CI/NI H101P1CI/NI H101P2CI/NI H101E2CI/NI H1P4E50/E80 H138E50/E80 HE38E50/E80 H224F H224LP H234F H234LP H122KON H234F H238LP H238PLP H239 H3848 H3940 HEP4E50/E80 HF108A/HF220 HF110A/HF220 L100###NI L200NI L200SNI L220NI L220SNI Details Focus only controller H101A stage with 2mm screw pitch and 200 step motor H101F flat top stage with 1 mm screw pitch, 200 step motors and encoders H101F flat top stage with 1mm screw pitch and 200 step motors. H101F flat top stage with 2mm screw pitch and 200 step motors. H101F flat top stage with 2 mm screw pitch, 200 step motors and encoders H101A stage with 1 mm screw pitch and 400 step motor H138A Eight slide holding stage with 200 step motor and 2mm ball screw H138A Eight slide holding stage with 200 step motor and 2mm ball screw and encoders Low profile slide holder for flat top stages Low profile slide holder Low profile slide holder for flat top stages for four 76 x 26 mm slides Low profile slide holder, for four 76 x 26 mm slides Direct fine focus coupling kit for Nikon and Olympus Low profile slide holder (4 slides) for flat top stages Low profile slide holder for eight 76 x 26 mm slides Semi recessed low profile slide holder for eight 76 x 26 mm slides Aluminium plate for H138A and HE38 Adapter allowing conventional sample holders to be fitted to flat top stages Adapter for PS3H122R (Nikon Ni-U and Ni-C only) H101A stage with 1mm screw pitch, 400 step motor and encoders 8 position 32 mm filter wheel with adapter 10 position 25 mm filter wheel with adapter Single LED illumination system. Replace ### with wavelength required. Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter. Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths 13 Nikon Automation Guide

Nikon Ni Focussing Stage Product Details LDB102NI Brightfield Illumination LED for Nikon (standalone) LDB103NI Brightfield Illumination LED for Nikon (ProScan control) PS3H122R Generic Focus Drive with rotating cable system to prevent twisting NIKNIMA Adapter for Nikon Ni for NIKRFK NIKRFK Nikon remote focussing kit - includes controller, cables and focus motor NZ200F NanoScanZ (adapted for flat top stages) PL200 Slide Loader PL228 Bevel edged sample holder for 1 x 3 slides. Includes 4 slide racks for for 1 x 3 slides PL238 Bevel edged sample holder for 2 x3 slides. Includes 2 slide racks for 2 x 3 slides. PL304 Barcode reader for PL200 PL310 Elevated baseplate to improve clearance PLE01E50/E80 Encoded H101A stage for use with Slide Loader (use with PL228 only) PL101E50/E80 H101A stage for use with slide loader PS3H122R Generic focus drive with rotating cable system to prevent twisting PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input Notes 1The slide loader can only be used with the PL101E50/E80 or PLE01E50/80 stages 2 The PLE01E50/80 is only for use with the PL228 3 The suffix E50 OR CI is applicable for Ni microscopes with a SS Sub-stage. For SSR sub-stages add E80 or NI instead 4 NZ200F can only be used with flat top stages 14 www.prior.com

Nikon Ni Focussing Nosepiece Sample holders - H224LP - H224PLP - H234LP Slide Loader - PL200 - PL238 OR PL228 - PL304 - PL310 Post Sample Holder - HZP1000 - HZP1010 - HZP1020 HZP Post Mounts - HZP150 - HZP200 - HZP250 - HZP300 Motorised stages - H101NFN - HIP4NFN - HEP4NFN - PL101NFN - PLE01NFN Z-Deck - ZDN 12MP - ZDN12ME - ZDN12MK - ZDN12MF Z-Deck Sample Holders - HZ202 - HZ203 NanoScanZ* - NZ200F (HZ201 adapter 15 Nikon Automation Guide

Nikon Ni Focussing Nosepiece Lumen 200 - L220SNI - L200SNI Translation Stage - ZDP50T - ZDP50K Lumen 100 - L100###NI (Replace ### with wavelength) Filter wheels - HF108A/HF220 (Excitation) - HF110A/HF220 (Excitation) Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Shutters - HF200HT (Excitation) - HF201HT (Excitation) Brightfield - LDB103NI - LDB102NI Lumen 200 - L220NI - L200NI Joystick Control Unit - PS3J100 16 www.prior.com

Nikon Ni Focussing Nosepiece Product ES10ZE H101NFN H1P4NFN H224F H234F H224LP H224PLP H234LP HEP4NFN HF108A/HF220 HF110A/HF220 HF200HT HF201HT HZ201 HZ202 HZ203 HZP150 HZP200 HZP250 HZP300 HZP1000 HZP1010 HZP1020 L100###NI L200NI L200SNI L220NI L220SNI LDB102NI LDB103NI NZ200F Details Focus only controller H101A stage with 2mm screw pitch and 200 step motor H101A stage with 1 mm screw pitch and 400 step motor Low profile slide holder for flat top stages Low profile slide holder for flat top stages for four 76 x 26 mm slides Low profile slide holder Low profile slide holder (71 x 51 mm slide holder) Low profile slide holder for 4 71 x 21 mm slides H101A stage with 1mm screw pitch, 400 step motor and encoders 8 position 32 mm filter wheel with adapter 10 position 25 mm filter wheel with adapter High speed shutter with 25 mm aperture High speed shutter with 32 mm aperture Adapter allowing upright sample holders to be inserted into Z-Deck Solid Insert Plate for Z-Deck 108 mm ring insert plate for Z-Deck Rigid post mount 150 mm tall Rigid post mount 200 mm tall Rigid post mount 250 mm tall Rigid post mount 300 mm tall Manipulator holder for HZP150/200/250/300 Standard sample holder for HZP150/200/250/300 Circular holder for HZP150/200/250/300 Single LED illumination system. Replace ### with wavelength required Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths Brightfield Illumination LED for Nikon (standalone) Brightfield Illumination LED for Nikon (ProScan control) NanoScanZ (adapted for flat top stages) 17 Nikon Automation Guide

Nikon Ni Focussing Nosepiece Product Details NZ200F NanoScanZ (adapted for flat top stages) PL200 Slide Loader PL228 Bevel edged sample holder for 1 x 3 slides. Includes 4 slide racks for for 1 x 3 slides PL238 Bevel edged sample holder for 2 x3 slides. Includes 2 slide racks for 2 x 3 slides PL310 Elevated baseplate to improve clearance PL304 Barcode reader for PL200 PL101NFN H101A stage for use with slide loader PLE01NFN Encoded H101A stage for use with Slide Loader (use with PL228 only) PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input ZDN12MP Motorised Z-Deck quick adjust platform system ZDN12ME Motorised Z-Deck quick adjust platform system (Encoded) ZDN12MK Manual Z-Deck quick adjust platform system ZDN12MF Fixed plate Z-Deck quick adjust platform system ZDP50K Translation stage for microscope (manual) ZDP50T Translation stage for microscope (motorised) Notes 1) The slide loader can only be used with the PL101FN or PLE01FN stages 2) The PLE01FN is only for use with the PL228 3) The NZ200F can only be used with the Z-Deck 18 www.prior.com

Nikon AZ100 Motorised stages 3 - H101AZEP/E50 - HIP4AZEP/E50 - HEP4AZEP/E50 - PL101AZEP/E50 - PLE01AZEP/E50 Sample holders - H224LP - H473UP Sample holder adapter Flat top Motorised stages 3 - H101E1AZEP - H101P1AZEP - H101P2AZEP Sample holders (Flat top) - H224F - H234F 8 Slide Stage 3 - H138AZEP/E50 - HE38AZEP/E50 NanoScanZ 4 - NZ200F Sample holders (H138A) - H238LP - H238PLP - H239 19 Nikon Automation Guide

Slide Loader - PL200 1 - PL238 2 OR PL228 2 - PL304 Lumen 200 - L220S - L200S - L220 - L200 Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Focus Motor - PS3H122S15 Joystick Control Unit - PS3J100 Focus Motor - PS3H122R + H2531 20 www.prior.com

Nikon AZ100 Product ES10ZE H101ZEP/E50 H101E1AZEP H101P1AZEP H101P2AZEP H101E2AZEP H1P4ZEP/E50 H138ZEP/E50 HE38ZEP/E50 HEP4ZEP/E50 H224F H224LP H234F H238LP H238PLP H239 H2531 H3848 H473UP L200 L200S L220 L220S NZ200F Details Focus only controller H101A stage with 2mm screw pitch and 200 step motor H101F flat top stage with 1 mm screw pitch, 200 step motors and encoders H101F flat top stage with 1mm screw pitch and 400 step motors H101F flat top stage with 2mm screw pitch and 200 step motors H101F flat top stage with 2 mm screw pitch and 200 step motors and encoders H101A stage with 1 mm screw pitch and 400 step motor H138A Eight slide holding stage with 200 step motor and 2mm ball screw H138A Eight slide holding stage with 200 step motor and 2mm ball screw and encoders H101A stage with 1mm screw pitch, 400 step motor and encoders Low profile slide holder for flat top stages Low profile slide holder Low profile slide holder (4 slides) for flat top stages Low profile slide holder for eight 76 x 26 mm slides Semi recessed low profile slide holder for eight 76 x 26 mm slides Aluminium plate for H138A and HE38 Adapter for PS3H122R to fit to AZ100 Adapter allowing conventional sample holders to be fitted to flat top stages Universal sample holder Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths NanoScanZ (adapted for flat top stage) 21 Nikon Automation Guide

Product Details PL200 Slide Loader PL228 Bevel edged sample holder for 1 x 3 slides. Includes 4 slide racks for for 1 x 3 slides PL238 Bevel edged sample holder for 2 x3 slides. Includes 2 slide racks for 2 x 3 slides PL304 Barcode reader for PL200 PL101ZEP/E50 H101A stage for use with slide loader PLE01ZEP/E50 Encoded H101A stage for use with Slide Loader (use with PL228 only) PS3H122R Generic focus drive with rotating cable system to prevent twisting PS3H122RS15 Focus motor adapted for AZ100 PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input Notes 1 The slide loader can only be used with the PL101ZEP/E50 or PLE01ZEP/E50 stages 2 The PLE01ZEP/E50 is only for use with the PL228 3 AZEP is for Episcopic AZ100s, E50 for diascopic 4 NZ200F can only be used with flat top stages Note that the AZ100 only accepts liquid light guides so remove adaptors and collimators from illumination devices 22 www.prior.com

Nikon SMZ18/25 Sample holders - H224LP - H473UP OptiScan Stage 1 - ES111 Sample holders (Flat top) - H224F - H234F Sample holder adapter -H3848 Flat top Motorised stages - H101P2F - H101E2F Adapter -HSMZ1825 NanoScanZ - NZ200F 23 Nikon Automation Guide Laser Autofocus - LF210 - LF100K - LF320

Focus Motor - PS3H122S15 Lumen 200 - L220S - L200S - L220 - L200 Controllers* - ES10ZE - ES11 1 - V31XYZE - V31F - V31XYZEF *Compatible with most imaging software Joystick Control Unit - PS3J100 - CS1525DP 24 www.prior.com

Nikon SMZ18/25 Product Details CS152DP OptiScan III Joystick ES10ZE Focus only controller ES11 OptiScan III Controller ES111 ES11 stage with 125 x 75 mm travel H101P2F H101F flat top stage with 2mm screw pitch and 200 step motors H101E2F H101F flat top stage with 2mm screw pitch and 200 step motors with encoders H224F Low profile slide holder for flat top stages H224LP Low profile slide holder H234F Low profile slide holder (4 slides) for flat top stages H3848 Adapter allowing conventional sample holders to be fitted to flat top stages H473UP Universal sample holder HSMZ1825 Adapter for mounting stages on the SMZ1825 L200 Metal Halide Illumination Source L200S Metal Halide Illumination Source with integral shutter L220 Metal Halide Illumination Source with extended UV/IR wavelengths L220S Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths LF100K LF210 Digipot and Keypad LF210 Laser AutoFocus (requires flange and keypad) LF320 LF210 Mounting flange for Nikon Microscopes NZ200F NanoScanZ (adapted for flat top stage) PS3H122S15 Focus motor adapted for SMZ 18 (not suitable for SMZ 25) PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input Notes 1 The ES111 stage can ONLY be controlled by the ES11 controller. Consult Prior Scientific for the difference between OptiScan and ProScan control systems and stages 25 Nikon Automation Guide

Nikon SM800/1000/1270/1500 SMZ 800/1000/1270/1500 Stage Addition Older SMZ Microscopes can be enhanced with Prior equipment, mostly in a similar way to the SMZ18/25. The optimal stage configuration will depend on the illumination base on the stereo microscope. This guide only applies for the SMZ 800, SMZ 1000, SMZ1270 and SMZ 1500 stereo microscopes from Nikon. For the grey cells, the correct configuration is the addition of E600 to the stage. Stage Stage description Adapter to be used Light Base Light Base Description P2-PB Plain base P2-DBL LED Diascopic illumination base H101P2F Flat top, 200 step, 2 mm ballscrew HSMZ1825 P2-DBF Fiber Diascopic illumination base HE01E2F Encoded flat top, 200 step, 2 mm ballscrew P-PS32 Plain stand P-DSL32 LED Diascopic illumination stand P-DSF32 Fiber Diascopic illumination stand C-DS Diascopic stand S H101P2FE600 Flat top, 200 step, 2 mm ballscrew C-PS160 Plain stand H101E2FE600 Encoded flat top, 200 step, 2 mm ballscrew C-DSD115 DIA stand H101E600 200 step, 2 mm ballscrew H448 C-DSD230 DIA stand H1P4E600 400 step, 1 mm ballscrew C-DSDF DIA stand F HEP4E600 Encoded 400 step, 1 mm ballscrew C-DSS115 DIA stand C-DSS230 DIA stand 26 www.prior.com

Nikon LV100/150 Sample holders - H220 - H234LP - H224LP - HWC15SNL (H105) - HWC15VNL (H105) - H231 (H105) - H227 (H105) Motorised stages - H101NLV - HIP4NLV - HEP4NLV - H105N2F Flat top Motorised stages - H101P2NLV - H101E1NLV - H101P1NLV Sample holder adapter H3848 NanoScanZ 1 - NZ200F 8 Slide Stage - H138NLV - HE38NLV Sample holders (Flat top) - H220F - H230F - H224F - H234F Sample holders (H138A) - H238LP - H238PLP - H239 27 Nikon Automation Guide

Brightfield - LDB103NI - LDB102NI Laser Autofocus - LF210 - LF100K - LF320 Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Compatible with most imaging software Focus Motor - PS3H122R/H3909 Joystick Control Unit - PS3J100 28 www.prior.com

Nikon LV100/150 Product Details ES10ZE Focus only controller H101E1NLV H101F flat top stage with 1 mm screw pitch, 200 step motors and encoders H101NLV H101A stage with 2mm screw pitch and 200 step motor H101P2NLV H101F flat top stage with 2mm screw pitch and 200 step motors H105N2F Large format stage with 154 x 154 mm travel range, 200 step motors and 2 mm screw pitch H101P1NLV H101F flat top stage with 1mm screw pitch and 400 step motors. H1P4NLV H101A stage with 1 mm screw pitch and 400 step motor H138NLV H138A Eight slide holding stage with 200 step motor and 2mm ball screw HE38NLV H138A Eight slide holding stage with 200 step motor and 2mm ball screw and encoders H220 Glass insert plate H220F H101F glass insert plate H224F Low profile slide holder for flat top stages H224LP Low profile slide holder (76 x 26 mm slide) H227 Glass plate (H105 stages) - not suitable for transmitted microscopy H230 Aluminium insert plate H230F H101F aluminium insert plate H231 Aluminium plate (H105 stages) H234F Low profile slide holder (4 slides) for flat top stages H224LP Low profile slide holder (4 x 26 x 76 mm slides) H238LP Low profile slide holder for eight 76 x 26 mm slides H238PLP Semi recessed low profile slide holder for eight 76 x 26 mm slides H239 Aluminium plate for H138A and HE38 H3848 Adapter allowing conventional sample holders to be fitted to flat top stages H3909 Focus Motor Adapter for Nikon LV series and L200 HE05NL/2 Encoded variant of H105/2 HEP4NLV H101A stage with 1mm screw pitch, 400 step motor and encoders HWC15SNL Wafer chuck for 100 and 150 mm wafers (H105 stages) HWC15VNL Wafer chuck, rotatable with vacuum for 150 mm (H105 stages) LDB102NI Brightfield Illumination LED for Nikon (standalone) LDB103NI Brightfield Illumination LED for Nikon (ProScan control) LF100K LF210 Digipot and Keypad LF210 Laser AutoFocus (requires flange and keypad) LF320 LF210 Mounting flange for Nikon Microscopes NZ200F NanoScanZ (adapted for flat top stages) 29 Nikon Automation Guide

Product Details PS3H122R Generic Focus Drive with rotating cable system to prevent twisting PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input Notes 1 NZ200F can only be used with flat top stages 30 www.prior.com

Nikon L200/300 Large format motorised stages 1 - H116/2-8 - HE16/2-8 - H105N2F Sample holders for large format stages - H225 (H116) - H232 (H116) - HWC20S (H116) - HWC20V (H116) - HWC15SNL (H105) - HWC15VNL (H105) - H231 (H105) - H227 (H105) Large format motorised stages 1 - H112/2ST - HE12/2ST L300 ONLY Sample holders for large format stages - H223 (H112) - H223 (H112) - H223B (H112) - HWC30V (H112) 31 Nikon Automation Guide

Brightfield - LDB103NI - LDB102NI Laser Autofocus - LF210 - LF100K - LF320 Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Compatible with most imaging software Focus Motor - PS3H122R/H3909 Joystick Control Unit - PS3J100 32 www.prior.com

Nikon L200/300 Product Details ES10ZE Focus only controller H112/2ST Stage with 300 x 300 mm travel range and 2 mm ball screw HE12/2ST As above with encoders H116/2-8 Large format stage with 255 x 215 mm travel range, 200 stepper motor and 2 mm screw pitch HE16/2-8 As above with encoders H105N2F Large format stage with 154 x 154 mm travel range, 200 step motors and 2 mm screw pitch H221 Glass Plate (H112 stages) - not suitable for transmitted microscopy H225 Glass plate (H116 stages) - not suitable for transmitted microscopy H227 Glass plate (H105 stages) - not suitable for transmitted microscopy H231 Aluminium plate (H105 stages) H233 Aluminium plate (H112 stages) H233B Aluminium plate with M4 and M6 tapped holes (H112 stages) H232 Aluminium plate (H116 stages) H3909 Focus Motor Adapter for Nikon LV series and L200 HWC15SNL Wafer chuck for 100 and 150 mm wafers (H105 stages) HWC15VNL Wafer chuck, rotatable with vacuum for 150 mm (H105 stages) HWC20S Wafer chuck for for 150 mm and 200 mm wafers (H116 stages) HWC20V Wafer chuck, rotatable with vacuum for 200 mm wafers (H116 stages) HWC30S Wafer chuck, rotatable, for 300 mm wafers (H112 stages) LDB102NI Brightfield Illumination LED for Nikon (standalone) LDB103NI Brightfield Illumination LED for Nikon (ProScan control) LF100K LF210 Digipot and Keypad LF210 Laser AutoFocus (requires flange and keypad) LF320 LF210 Mounting flange for Nikon Microscopes PS3H122R Generic Focus Drive with rotating cable system to prevent twisting PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input Notes 1 Only the L300 can accommodate H112 stages 33 Nikon Automation Guide

NOTES 34 www.prior.com

Nikon TS2R NanoScanZ Incubation Chambers - W3569 (NZ10/2000) - W3719 (NZ400) NanoScanZ Sample holders - H499XR (NZ100/200) - H472XR (NZ100/200) - H471XR (NZ100/200) - NZ303 (NZ400) - NZ302 (NZ400) - NZ301 (NZ400) Motorised stages - H117P1N4 - H117E1N4 Option to add H117ACCM Sample holders - H473XR - H223XRNC - H229XR -H224XRLP Linear stages - HLD117NN (HLD324 adapter required for use of Prior Sample Holders) H139 Stages - H139P1N4 - H139E1N4 H139 Sample holders - H171XR - H223XR2 - H473R3 35 Nikon Automation Guide

Nikon TS2R NanoScan Z stages - NZ400 Lumen 200* - L220S - L200S - L220 - L200 Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF - VLD31XYZ - VLD31XYZEF Joystick Control Unit - PS3J100 Focus Motor - PS3H122R + H2975 / H122KON 36 www.prior.com

Nikon TS2R Product ES10ZE H117ACCM H117E1N4 H117P1N4 H122KON H139P1N4 H139E1N4 H171XR H223XRNC H223XR2 H224XRLP H229XR H473XR H473XR3 HLD117NN HLD324 L200 L200S L220 L220S NZ301 NZ302 NZ303 NZ400 PS3H122R/H2975 PS3J100 V31F V31XYZE V31XYZEF VLD31XYZ VLD31XYZF W3569 W3719 Details Focus only system controller Extension plates for H117 stages H117 motorised stage with 1mm screw pitch and encoders H117 motorised stage with 1mm screw pitch Direct fine focussing kit for Nikon and Olympus Microscopes H139 motorised stage with 1 mm ballscrew, 400 stepper motor H139 motorised stage with 1 mm ballscrew, 400 stepper motor and 100 nm encoder 9 slide holder for H139 Extra recessed low profile microtitre plate for H117 stages 2 micro titre plate holder for H139 Extra recessed low profile slide holder for H117 stages Extra recessed petri dish holder for H117 stages Extra recessed universal holder for H117 stages Double Universal sample holder for H139 Linear motor stage with travel range of 81 x 121 mm and 50 nm encoders Required to adapt linear stages for Prior insert Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter and with extended UV/IR wavelengths Extra recessed well plate holder for NZ400 Extra recessed slide/petri dish holder for NZ400 Extra recessed slide holder for NZ400 Nanopositioning piezo Z stage with 400 um of travel and controller Focus drive and adapter Multifunctional interactive control centre for ProScan ProScan Controller with three stepper drives for filters, shutters or a focus drive ProScan Controller with X Y Z drives and encoder capability ProScan controller with XYZ drives, three filter wheel drives, three shutter drives and encoder capability ProScan controller with XYZ drives for linear stage control ProScan controller with XYZ drives, three filter wheel drives, and three shutter drives for linear stage control Incubation chamber for NZ100/200 Incubation chamber for NZ400 37 Nikon Automation Guide

NOTES 38 www.prior.com

Ci Sample holders - H224LP - H234LP 8 Slide Stage - H138E50 - HE38E50 Motorised stages - H101E50 - HIP4E50 - HEP4E50 Sample holder adapter H3848 Flat top Motorised stages - H101E1CI - H101P1CI - H101P2CI - H101E2CI Sample holders (Flat top) - H224F - H234F 39 Nikon Automation Guide

Ci Sample holders (H138A) - H238LP - H238PLP - H239 Filter wheels - HF108A/HF220 (Excitation) - HF110A/HF220 (Excitation) Lumen 200 - L220SNI - L200SNI Brightfield - LDB103NI - LDB102NI Shutters - HF200HT/HF220 (Excitation) - HF201HT/HF220 (Excitation) Lumen 100 - L100###NI (Replace ### with wavelength) Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Lumen 200 - L220NI - L200NI Focus Motor - PS3H122R + H122KON + H3940 Joystick Control Unit - PS3J100 40 www.prior.com

Ci Product Details ES10ZE H101E50 H101E1CI H101P1CI H101P2CI H101E2CL H1P4E50 H138E50 HE38E50 H224F H224LP H234F H234LP H122KON H234F H238LP H238PLP H239 H3848 H3940 HEP4E50 HF108A/HF220 HF110A/HF220 HF200HT/HF220 HF201HT/HF220 L100###NI L200NI L200SNI L220NI L220SNI LDB102NI LDB103NI PS3H122R NZ200F PS3H122R Focus only controller H101A stage with 2mm screw pitch and 200 step motor H101F flat top stage with 1 mm screw pitch, 200 step motors and encoders H101F flat top stage with 1mm screw pitch and 400 step motors H101F flat top stage with 2mm screw pitch and 200 step motors H101F flat top stage with 2 mm screw pitch and 200 step motors H101A stage with 1 mm screw pitch and 400 step motor H138A Eight slide holding stage with 200 step motor and 2mm ball screw H138A Eight slide holding stage with 200 step motor and 2mm ball screw and encoders Low profile slide holder for flat top stages Low profile slide holder Low profile slide holder for flat top stages extra recessed, for four 76 x 26 mm slides Low profile slide holder, extra recessed, for four 76 x 26 mm slides Direct fine focus coupling kit for Nikon and Olympus Low profile slide holder (4 slides) for flat top stages Low profile slide holder for eight 76 x 26 mm slides Semi recessed low profile slide holder for eight 76 x 26 mm slides Aluminium plate for H138A and HE38 Adapter allowing conventional sample holders to be fitted to flat top stages Adapter for PS3H122R H101A stage with 1mm screw pitch, 400 step motor and encoders 8 position 32 mm filter wheel with adapter 10 position 25 mm filter wheel with adapter High Speed Shutter 25 mm aperture for use with filter wheel with adapter High Speed Shutter 32 mm aperture for use with filter wheel with adapter Single LED illumination system. Replace ### with wavelength required. Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths Brightfield Illumination LED for Nikon (standalone) Brightfield Illumination LED for Nikon (ProScan control) Generic Focus Drive with rotating cable system to prevent twisting NanoScanZ (adapted for flat top stages) Generic focus drive with rotating cable system to prevent twisting 41 Nikon Automation Guide

Ci Product Details PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input 42 www.prior.com

Nikon MA100 Sample Holders - H224ROTS - H473 - H649 - H656 - H659 OptiScan stage - ES107NTS Brightfield - LDB102NI Focus Motor - PS3H122R/H3550 Controllers - ES10ZE - ES11 - CS515DP 43 Nikon Automation Guide

Product Details CS52DP OptiScan III Joystick ES10ZE Focus only controller ES107NTS OptiScan motorised stage 125 x 75 mm ES11 OptiScan III Controller H224ROTS Recessed rotating holder for one 26 x 76 mm slide H473 Universal Specimen Holder for slides and petri dishes H649 Holder for a single 1, 1.25 and 1 metallurgical slide specimen H656 Holder for a single metallurgical specimen, 1.25 diameter H659 Holder for one mounted metallurgical specimen, 15 diameter with 1,2,4 or 8 chambers. LDB102NI Brightfield Illumination LED for Nikon (stand alone) PS3H122R/H3550 Focus motor and adapter 44 www.prior.com

MA200 Brightfield - LDB102NI - LDB103NI C-HGFI/C-HGFIE required Lumen 200 - L200S - L220S - L200 - L220 Note that the collimator must be removed 45 Nikon Automation Guide Focus Motor - PS3H122R + H3273

NanoScanZ Sample holders - NZ303 (NZ400) - NZ302 (NZ400) - NZ301 (NZ400) NanoScan Z stages - NZ400 Motorised stages - H117N2M4 - H117N1M4 Joystick Control Unit - PS3J100 Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Sample holders - H473XR - H234XR - H224XRLP - H649 - H656 - H657 - H658 - H659 46 www.prior.com

Nikon MA200 Product Details ES10ZE Focus only system controller H117P1M4 H117 motorised stage with 1mm screw pitch H234XRLP Low profile slide holder, extra recessed, for one 76 x 51 mm slide H234 Low profiles slide holder, extra recessed, for four 76 x 26 mm slides H649 Holder for 1, 1.25 and 1.5 mounted metallurgical specimens H656 Holder for 1.25 mounted metallurgical specimens H657 Holder for 1 2 mounted metallurgical specimen H658 Holder for 6 mounted metallurgical specimens 1.25 diameter H659 Holder for one mounted metallurgical specimen, 1.5 in diameter with 1 2 4 or 8 chambers L200 Metal Halide Illumination Source L200S Metal Halide Illumination Source with integral shutter L220 Metal Halide Illumination Source with extended UV/IR wavelengths L220S Metal Halide Illumination Source with integral shutter and with extended UV/IR wavelengths L300DLG 3 LED illumination system for with single band filter set with UV/Violet peak at 365 nm and light guide LDB102NI Brightfield Illumination LED for Nikon (standalone) LDB103NI Brightfield Illumination LED for Nikon (ProScan control) NZ301 Extra recessed well plate holder for NZ400 NZ302 Extra recessed slide/petri dish holder for NZ400 NZ303 Extra recessed slide holder for NZ400 NZ400 Nanopositioning piezo Z stage with 400 um of travel and controller PS3H122R/H3273 Focus drive and adapter PS3J100 Multifunctional manual joystick for ProScan V31F ProScan Controller with three stepper drives for filters, shutters or a focus drive V31XYZE ProScan Controller with X Y Z drives and encoder capability V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, three shutter drives and encoder capability 47 Nikon Automation Guide

NOTES 48 www.prior.com

ProZ stand for Nikon Lumen 200 - L220NI - L200NI - L220SNI - L200SNI Brightfield - LDB103NI - LDB10FNI Adapter for LV series - ZCALV Pillar Mounting Adapter ZC12FLNG Joystick Control Units - PS3J100 ProZ Stand - ZC12 - ZC12EL - ZC12FL Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Compatible with most imaging software Sample holders - H224LP (H101 stages ) - H473UP (H101 stages ) - H230 (H101 stages) - H220 (H101 stages) - H227 (H105 stages) - H231 (H105 stages) - H225 (H116 stages) - H232 (H116 stages) - H233 (H112 stages) - H221 (H112 stages) 49 Nikon Automation Guide

ProZ stand for Nikon Adapter for AZ100 - ZCAAZ - ZCAAZS (ZC12EL only) Adapter for SMZ18/25 - ZCASMZ25 - ZZCASMZ25S (ZC12EL only) Mounting stand - H414 (for use with ZC12EL) -H413 Clamping Arms ZCBCK Stage mount ZCBRL ZCBTL Large Format Motorised stages - H116/2 - HE16/2 - H112/2ST - HE12/2ST Focus Blocks - FB201 - FB203 - FB204/4 - FB205/E - FB206/E Motorised stages - H101 - HIP4 - HEP4 - H105N2F 50 www.prior.com

ProZ stand for Nikon Product Details ES10ZE Focus only controller FB201 Manual focussing block FB203 Motorised Linear Axis FB204 Motorised focus holding an incident light Prior stage; with flanges for fitting to optical table FB204E As above with Encoders FB205 Motorised focus with offset base holding an incident light Prior stage with flanges for fitting to optical table FB205E As above with encoders FB206 Motorised focus holding a transmitted light Prior stage with flanges for fitting to optical table FB206E As above with encoders H101 H101A stage with 2mm screw pitch and 200 step motor H105N2F Large format stage with 154 x 154 mm travel range, 200 step motors and 2 mm screw pitch H112/2ST Large format stage with 302 x 302 mm travel range, 200 stepper motor and 2 mm screw pitch H116/2 Large format stage with 255 x 215 mm travel range, 200 stepper motor and 2 mm screw pitch H1P4 H101A stage with 1 mm screw pitch and 400 step motor H220 Glass plate (H101 stages) - not suitable for transmitted microscopy H221 Glass plate (H112 stages) - not suitable for transmitted microscopy H224LP Low profile slide holder (H101 stages) H225 Glass plate (H116 stages) - not suitable for transmitted microscopy H227 Glass plate (H105 stages) - not suitable for transmitted microscopy H230 Aluminium plate (H101 stages) H231 Aluminium plate (H105 stages) H232 Aluminium plate (H116 stages) H233 Aluminium plate (H112 stages) H413 Mounting stand for H101 or H105 stages H414 Mounting stand for H112 or H116 stages H473UP Universal sample holder (H101 stages) HE12/2ST Encoded variant of H112/2ST HE16/2 Encoded variant of H116/2 HEP4 H101A stage with 1mm screw pitch, 400 step motor and encoders 51 Nikon Automation Guide

ProZ stand for Nikon Product Details L200NI Metal Halide Illumination Source L200SNI Metal Halide Illumination Source with integral shutter. L220NI Metal Halide Illumination Source with extended UV/IR wavelengths L220SNI Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths LDB102NI Brightfield Illumination LED for Nikon (standalone) LDB103NI Brightfield Illumination LED for Nikon (ProScan control) PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input ZC12 Motorised Z column with 500 mm 2 base and 250 mm of travel ZC12EL Motorised Z column with approx 600 x 750 mm base and 250 mm of travel ZC12FL Motorised Z column with no base and 250 mm of travel ZC12FLNG Adapter for mounting ZC12FL to optical mounting table ZCAAZ Nikon AZ100 Optical Mounting Arm ZCAAZS Extended AZ100 Optical Mounting Arm (ZC12EL only) ZCALV Nikon LV Optical Mounting Arm ZCASMZ25 Nikon SMZ18/25 Optical Mounting Arm ZCASNZ25S Extended SMZ1/25 Optical Mounting Arm (ZC12EL only) ZCBCK Universal clamping kit for illumination bases ZCBRL H101, H105 stage mount reflected light only. Add HP1770 for manual stage dovetail option. ZCBTL Prior H101, H105 stage mount transmitted light. Accepts 50mm diffuser/filter. Includes Prior LDB101 LED light source Notes Note that H116 and H112 stages require ZC12EL and H414 52 www.prior.com

Stage Codes for Nikon H101F FLAT TOP STAGE FOR UPRIGHT MICROSCOPES H101P2F This indicates whether the stage is encoded or not: P: Not currently encoded (upgrade available) E: Encoded This indicates the microscope type the stage is suitable for: F: SMZ18/25 (requires HSMZ1825 adaptor) NI: Nikon (SSR substage) CI: Nikon (SS substage) ZEP: Nikon (AZ100) This indicates the ballscrew of the stage: 1: 1 mm ballscrew 2: 2 mm ballscrew H117 STAGE FOR INVERTED MICROSCOPES This indicates the microscope type the stage fits to and stepper motor the stage has: H117E1#4 This indicates the ballscrew of the stage: NN: Nikon, 200 stepper motor N4: Nikon, 400 stepper motor MA: Nikon, 200 stepper motor (MA200 only) M4: Nikon, 400 stepper motor (MA200 only) 1: 1 mm ballscrew 2: 2 mm ballscrew This indicates whether the stage is encoded or not: H101A STAGE FOR UPRIGHT MICROSCOPES H101A This indicates the ballscrew of the stage; 0: 2 mm ballscrew P: 1 mm ballscrew 53 Nikon Automation Guide P: Not currently encoded (upgrade available) E: Encoded This indicates the stepper motor of the stage: 1: 200 stepper motor 4: 400 stepper motor H138A STAGE FOR UPRIGHT MICROSCOPES H138A This indicates whether the stage is encoded or not: 1: Not currently encoded (upgrade available) E: Encoded This indicates the microscope type the stage fits to; E50: Nikon (SS substage) E80: Nikon (SSR substage) AZEP: Nikon (AZ100) LV: Nikon LV100/LV150 A: Nikon SMZ18/25 (requires HSMZ1825 adaptor) This indicates whether the stage is encoded or not: 1: Not currently encoded (upgrade available) E: Encoded This indicates the microscope type the stage fits to: E50: Nikon (SS substage) E80: Nikon (SSR substage) AZEP: Nikon (AZ100) NLV: Nikon LV100/LV150

Stage Codes for Nikon H112 STAGE FOR UPRIGHT MICROSCOPES H112/2ST This indicates the pitch ball screw: 2: 2 mm ballscrew pitch 5: 5 mm ballscrew pitch This indicates whether the stage is encoded or not: 1: Not currently encoded (upgrade available) E: Encoded H116 STAGE FOR UPRIGHT MICROSCOPES H116/2ST This indicates whether the stage is encoded or not: 1: Not currently encoded (upgrade available) E: Encoded This indicates the pitch ball screw: 2: 2 mm ballscrew pitch 5: 5 mm ballscrew pitch This indicates which microscope the stage fits to: -8: Nikon (LV200 requires H2100 spacer plate and range must be limited to 200mm) H105 STAGE FOR UPRIGHT MICROSCOPES H105/N2F There are currently no encoded variants for the H105/N2F. Z-DECK ZDN12MP This indicates what drives the Z deck: P: Stepper Motor (Unencoded) E: Stepper Motor (Encoded) K: Manual control F: Fixed (no movement possible) H139 MULTI-WELL PLATE STAGE H139#1## This indicates the microscope type the stage fits to: This indicates whether the stage is encoded: 1: Not currently encoded (upgrade available) E: 50 nm encoders NN: Nikon Ti N5: Nikon Ti Note that the suffix alters depending on the presence or absence of encoders. 54 www.prior.com

More to Prior than meets the eye Since 1919 Prior Scientific has been producing precision equipment for microscopy. With decades of experience, expert staff, a vast range of products and extensive design, manufacture and assembly facilities, Prior Scientific can supply equipment for all manner of microscopy applications. WORLDWIDE DISTRIBUTION Prior Scientific Ltd Cambridge UK Prior Scientific Inc Rockland MA. USA Prior Scientific GmbH Jena Germany Prior Scientific KK Tokyo Japan t: +44 (0)1223 881711 e: uksales@prior.com t: +1 781-878-8442 e: info@prior.com t: +49 (0) 3641 675 650 e: jena@prior.com t: +81-3-5652-8831 e: info-japan@prior.com 55 Nikon Automation Guide