Enterprise ADAPTABLE KEWAUNEE MOVEABLE WORKSTATIONS. encouraging new discovery

Similar documents
Enterprise ADAPTABLE. KEWAUNEE encouraging new discovery MOVEABLE WORKSTATIONS

Moveable Workstations. Enterprise KEWAUNEE. encouraging new discovery...worldwide

Symphony II Adaptable Table System

Sitting Height Base Cabinets

Signature Series WOOD KEWAUNEE LABORATORY FURNITURE. encouraging new discovery

LABORATORY SPECIFICATION SHEET

Solutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs

Steel Laboratory Furniture. Research Collection KEWAUNEE. encouraging new discovery...worldwide

SCI-FAB Product Specifications. Casework Section 1. Part 1 General

Steel Standing Height Base Cabinets

Display/Accessory Furniture

Steel Casework Construction Details

SECTION LABORATORY CASEWORK AND EQUIPMENT

Contents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)

ULTIMATE ROUTER TABLE PLANS. By Dan Phalen

Inspiring progress. Hamilton Scientific Distinction Laboratory Bench System Specification Catalog

Wood Casework Construction Details

Pivot-Door Downdraft Cabinet Plans

Kindly review the following and contact us with any questions or for further details.

System 3000 specifications

VWR LABORATORY BENCHES. Ergonomic, Flexible Lab System for Today s Modern Laboratories

Titan Series Systems

Family and Consumer Sciences

VWR LABORATORY BENCHES

Mobile Weapons Storage System Specifications

Opus Cabinets with "H Storage Unit, continued


An Introduction to Hann Manufacturing

DIVISION 12 - FURNISHINGS. Section General Discussion. Introduction

D. Product Certificates: Signed by manufacturers of casework certifying that products furnished comply with requirements.

HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK

Factory Assistance: Phone: Fax: Page 1

KLOPPENBERG Quality is the Best Buy Furniture

AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS

FLUENT Technical Specifications

Table of Contents. Steel Frame Bench...3. Workbench Island Locker Bench Pedestal Bench Table...8. Specialty Project Workstation...


SECTION CUSTOM CABINETS

Insolroll Clutch Operated Shades Installation Instructions Installation Instructions

EDUCATOR SERIES. Wood Casework Solutions For Life. Learning. Discovery.

Disassembly Instructions for Recycling June 10, 2010

SECTION MANUFACTURED CASEWORK

Accessories and workbenches

SECTION INTERIOR ARCHITECTURAL WOODWORK. A. Section includes interior woodwork items indicated not specified elsewhere and as specified.

INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK

***************************************************************************************************************

B. American Society for Testing and Materials (ASTM):

CaseworkUSA. specifications. 1.1 General 1.2 Summary. 1.3 Related Sections. 1.4 Definitions. 1.5 Qualifications and Quality Assurance

School Seating. Modern Cantilever Design. Lightweight ergonomic design. Waisted to allow reverse seating. High quality construction.

Jeff Branch WOODWORKING YOU CAN BUILD A. By adding subtle design elements, a traditional furniture style becomes decidedly modern.

Workbench Instructions for Assembly

table of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops

GE Monogram. Installation. Instructions. Microwave Oven. Under Cabinet Installation. and. JX827 Series Built-In Kit. Models.

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories

A great addition to Sub-Zero's complete line of

1. Division 6: Rough carpentry, blocking within walls to adequately support casework. 2. Division 9: Furnishing and installation of base molding.

Forever Young This group is one of our premium editions. crafted from Mighty Maple or Extreme Oak!

Plans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com

ZIC360NR GE Monogram 36" Built-In Bottom Freezer Refrigerator with Automatic Icemaker The Installation Space

Floor Boxes. Concealed Service Floor Boxes. Engineering Data 663 Series. Faces Plates for 663 Floor Box. 663 Series Floor Box

Metal Base Cabinet Details (S-Line Series) Metal Base Cabinets Metal Sink Base Cabinets

SECTION ARCHITECTURAL WOOD CASEWORK

Wilsonstak. library bookstacks general specifications. Wilsonstak

19-in. Mini-Rack Cabinet, Type 1

Bridges 2.0.

Tender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1

OXYGEN INSTALLATION. Revision date

SECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.

C. Installation shall be by experienced carpenters. Coordinate with plumbing and electrical contractors.

New Product Release: October 2014 Boone Racks

Linear Hook- on Worksurfaces

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20

CleanBench Laboratory Tables

WADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.

S.NO Description Quantity Rate Amount

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS

WHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK

L & T Open Shelf Filing System

05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes

Arlink 8000 Workstation

FURNITURE LABORATORY STEEL CASEWORK CASEWORK CONSTRUCTION DETAILS AND SPECIFICATIONS. Overview

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.

application guide S TA N D A R D H E I G H T W O R K S TAT I O N O V E RV I E W M U LT I - L E V E L W O R K S TAT I O N O V E RV I E W...

300 Series Pin & Barrel Type Continuous Stainless Steel Hinges

Oxford Stalls Installation Instructions

Assembly Instructions

AUXILIARY FRAMING AND ACCESSORIES

IAC INDUSTRIES 895 BEACON STREET BREA, CA Phone (714) Fax (714) Workmaster Assembly Instructions

Addendum. McKee and Associates Architecture and Interior Design. No. ONE Date: Project:

Preference Collection and Treatment Console INSTALLATION GUIDE

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Design and Construction Standards SECTION ATHLETIC LOCKERS

Cascade Ph: Casework Fax: Corp

129 KITCHEN BASE CABINET 480

Revised

WAL-MART SUPERCENTER # ; Milwaukie, OR: SPECIFICATIONS. Revisions to Specification Fence

SECTION MANUFACTURED WOOD CASEWORK. A. This Section includes wood laboratory casework, countertops, fixtures and accessories.

BCI General Specifications Design: BCI Gothia Shelving System

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY

Transcription:

Enterprise ADAPTABLE MOVEABLE WORKSTATIONS KEWAUNEE encouraging new discovery

Freestanding Tables Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving systems Pre-plumbed integrated services Pre-wired integrated power and data

Contents Enterprise Workstations... 2 Single-sided Support Frames... 4 Double-sided Support Frames... 8 Worksurface Frames... 12 Free-standing Tables... 13 Work Tops... 14 Enterprise Shelving... 16 Steel & Wood Cabinets... 22 Wood Mobile Cabinets... 26 Steel Mobile Cabinets... 28 Add-A-Drawer Cabinets... 30 Mobile Cabinet Tops... 31 Suspended Base Cabinets... 32 Suspended Upper Cabinets... 36 Ceiling Service Panels... 38 Technical Data... 42 Index... 50 Kewaunee s Enterprise is a self-supporting moveable workstation table design. Enterprise is available with an above counter support structure, or as an adjustable height four legged table. Available pre-plumbed and pre-wired, this design easily incorporates with overhead carrier and panel systems. Worksurfaces are adjustable from sitting height to standing height, and overhead shelving is adjustable on 1" increments. Enterprise is designed for mobile, suspended, or floor mounted casework. Kewaunee s Enterprise provides a completely moveable laboratory casework system to meet the needs of a changing lab environment. EW-04/12r1-1

Single-sided Workstation 2" Post Enterprise Workstations Features: Self-supporting workstations Pre-plumbed integrated services May be used individually or in multi bench assemblies Adjustable height worksurfaces Integrated shelving systems Pre-wired integrated power and data UL certification available Multiple cabinet options including mobile, suspended, and floor mounted. EW-04/12r1-2

Double-sided Workstation 6" Post Features: Self-supporting workstations Pre-plumbed integrated services May be used individually or in multi bench assemblies Adjustable height worksurfaces Integrated shelving systems Pre-wired integrated power and data UL certification available Multiple cabinet options including mobile, suspended, and floor mounted. Double-sided - 6 Post Workstation not available in North America EW-04/12r1-3

Single-Sided Workstation Support Frames Single-sided Workstation Support Frames consist of two, 11 gauge, 2" diameter, powder coated steel, tubular posts with leveling feet. An Upper Spacer Bar and lower Power Bar, located 53 1 2" above the floor are securely fastened to the posts to form a rigid support frame. The upper portion of the frame is slotted on 1" centers to accept shelving. The lower section is bored and tapped Single Sided Workstation Support Frames for the attachment of the adjustable height Worksurface Frame. Workstation Support Frames 60" long and longer have an additional center post to add further support for the shelving assemblies. Single-sided Workstation Support Frame 42" Long FE30M840242-00 48" Long FE30M840248-00 Single-sided Workstation Support Frame 60" Long FE30M840260-00 72" Long FE30M840272-00 96" Long FE30M840296-00 EW-04/12r1-4

Single-Sided Support Frame Options Single-sided Workstation Support Frames will accept numerous service, electrical, and data/com options. Each post will accept up to three service fittings, pre-piped for easy connection to overhead services. The horizontal Power Bar will accept both electrical receptacles and data/com outlets, and may be pre-wired for overhead connections. Each post will also accept an optional electrical fixture below the worksurface. Workstation Support Frame Plumbing and Electrical Options Workstation Support Frame layout Technical Sheets on pages 44 and 45 may be used to specify services and options required. Add-on 3/8" IPS Flexible Hose available in reinforced PVC, polyurethane, or braided stainless steel Upper Spacer Bar Pre-piped 1/4" Tubing to top of post available in copper or stainless steel Pre-wired Pigtail to 3' or 6' above top of post available with 15 or 20 amp plugs Straight Blade or Twist-Lock Power Bar Data Outlet Double RJ45 Outlets Service Fittings Single outlet Ball Valve or Needle Cock (three fitting maximum) Power Bar Power Bar Electrical Receptacles 20 amp, 120 VAC, Specification Grade Standard or GFCI Left Post Note: 2" diameter posts with accept either electrical fixtures or service fittings, but not both. UL certification available on request. Right Post Electrical Receptacle 20 amp, 120 VAC, Specification Grade Standard or GFCI EW-04/12r1-5

Single-sided Support Frame Options Internal Service Tubes are required to mount services on the Workstation Support Frame. They are factory installed and consist of either copper or stainless steel 1 4" tubing with a female 3 8" IPS outlet escushion mounted in the 2" post and a female 3 8" IPS inlet at the top of the post. They are available in three lengths that correspond to the three mounting locations in the post. Ball Valves are chrome plated brass and provide on/off control of gas, air, or vacuum at pressures up to 75 PSI. Needle Point Cocks are chrome plated brass with a brass floating cone and integral brass seat. They provide metering control of laboratory gases at pressures up to 60 PSI. Internal Service Tubes Service Fittings Copper Tube for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Female Outlet Length Part Number 40" W-2321-40 Top Hole 44" W-2321-44 Middle Hole 48" W-2321-48 Bottom Hole Stainless Steel Tube for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Female Outlet Length Part Number 40" W-2421-40 Top Hole 44" W-2421-44 Middle Hole 48" W-2421-48 Bottom Hole Specify service fitting locations on Workstation Support Frame Layout Sheet Ball Valve 3/8" IPS Male Inlet Part Number W-0242-0A W-0242-0G W-0242-0N W-0242-0R W-0242-0V W-0242-00 Service Air Gas Nitrogen Argon Vacuum Specify Needle Point Cock 3/8" IPS Male Inlet Part Number Service W-0243-0A Air W-0243-0G Gas W-0243-0N Nitrogen W-0243-0R Argon W-0243-0V Vacuum W-0243-00 Specify Power Bar Electrical Fixtures Specify Power Bar Elecrtrical Fixture locations on Workstation Support Frame Layout Sheet (see page 44 and 45) Rear Support Post Electrical Fixtures Specify Post Electrical Fixture locations on Workstation Support Frame Layout Sheet (see page 44 and 45) Data/Com Outlet Part Number Device 0720-0K Black RJ45 Duplex 0720-0V Ivory RJ45 Duplex 120 VAC Outlet Part Number Device 0581-0K Black 20 amp Duplex 0581-0V Ivory 20 amp Duplex 0656-0K Black 20 amp GFI Duplex 0656-0V Ivory 20 amp GFI Duplex 120 VAC Outlet Part Number Device FE-2581-1K Black 20 amp Duplex FE-2581-1V Ivory 20 amp Duplex FE-2656-1K Black 20 amp GFI Duplex FE-2656-1V Ivory 20 amp GFI Duplex EW-04/12r1-6

Single-sided Support Frame Accessories Service Hoses are required to carry services from overhead service carriers to the top of the Support Frame. They may be used with Keyed Quick-Connect Fittings or attached directly to the Internal Service Tubes. Hoses are available in reinforced PVC, polyurethane, or braided stainless steel. Power Cords are required to carry electrical power from the overhead service carriers to the top of the Support Frame. The SJ 12/3 cord is available in various configurations. Keyed Quick-Connect Fittings are available for Hoses and Internal Service Tubes to ease service connection and disconnection during bench relocation. They are available in eight sizes (keys) which keeps service outlets from being connected to the wrong service. Service Hoses Power Cords Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W-1133-36 72" W-1133-72 Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W-1233-36 72" W-1233-72 Keyed Quick-Connect Fittings Coiled Polyurethane Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 72" W-1533-72 Single-circuit 3-wire 120 VAC Length Part Number Plug 36" W-5621-36 20A Straight Blade 72" W-5621-72 20A Straight Blade 36" W-5622-36 20A Twist-Lock 72" W-5622-72 20A Twist-Lock Dual-circuit 4-wire 120 VAC Length Part Number Plug 36" W-5623-36 20A Straight Blade 72" W-5623-72 20A Straight Blade 36" W-5624-36 20A Twist-Lock 72" W-5624-72 20A Twist-Lock Specify Power Cord locations on Workstation Support Frame Layout Sheet (see page 44 and 45) Male Quick-Connect Fitting 3/8" IPS Male Outlet Part Number W-8111-K1 W-8111-K2 W-8111-K3 W-8111-K4 W-8111-K5 W-8111-K6 W-8111-K7 W-8111-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Female Quick-Connect Fitting 3/8" IPS Female Inlet Part Number W-9112-K1 W-9112-K2 W-9112-K3 W-9112-K4 W-9112-K5 W-9112-K6 W-9112-K7 W-9112-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Key Number and Color Code Standard Service Female Body Sleeve Dia. Male Body Sleeve Dia. in. mm in mm K1 Black Helium 1.13 28.7 0.99 25.1 K2 Orange Air 1.16 29.5 1.02 25.8 K3 Green Cold Water 1.19 30.2 1.05 26.6 K4 Yellow Vacuum 1.22 31.0 1.08 27.4 K5 Blue Gas 1.24 31.5 1.11 28.1 K6 White 1.28 32.5 1.14 28.9 K7 Purple Argon 1.31 33.3 1.17 29.7 K8 Brown Nitrogen 1.34 34.0 1.20 30.4 EW-04/12r1-7

Double-Sided Workstation Support Frames Double-sided Workstation Support Frames consist of two, 11 gauge, 2" x 6" oval, powder coated steel, tubular posts with leveling feet. An Upper Spacer Channel and lower Power Bar, located 53 1 2" above the floor are securely fastened to the posts to form a rigid support frame. The upper portion of the frame is slotted on 1" centers to accept shelving. The lower section of the frame is bored Double Sided Workstation Support Frames and tapped for the attachment of the adjustable height Worksurface Frame. Each 6" tubular post has a full-height removable access panel. Workstation Support Frames 60" long and longer have an additional center post to add further support for the shelving assemblies. Double-sided Workstation Support Frame 42" Long FE30M840642-00 48" Long FE30M840648-00 Double-sided Workstation Support Frame 60" Long FE30M840660-00 72" Long FE30M840672-00 96" Long FE30M840696-00 Double-sided - 6 Post Workstation not available in North America EW-04/12r1-8

Double-Sided Support Frame Options Double-sided Workstation Support Frames will accept numerous service, electrical, and data/com options. Each post will accept up to three service fittings, prepiped for easy connection to overhead services. They may be piped with hoses to the top of the frame, or with Extended Length hoses which extend 3 or 6 feet above the top of the frame. The horizontal Power Bar will accept both electrical receptacles and data/com outlets, and Workstation Support Frame Plumbing and Electrical Options may be pre-wired for overhead connections. Each post will also accept an optional electrical fixture below the worksurface. Workstation Support Frame layout Technical Sheets on pages 46 and 47 may be used to specify services and options required. Add-on 3/8" Flexible Hose available in reinforced PVC, polyurethane, or braided stainless steel Pre-piped 3/8" Flexible Tubing to top of post available in reinforced PVC or braided stainless steel Power Bar Data Outlet Double RJ45 Outlets Upper Spacer Channel Power Bar Extended Length Pre-piped 3/8" Flexible Tubing to 3' or 6' above top of leg available in reinforced PVC and braided stainless steel Pre-wired Pigtail to 3' or 6' above top of post available with 15 or 20 amp plugs Straight Blade or Twist-Lock Power Bar Electrical Receptacles 20 amp, 120 VAC, Specification Grade Standard or GFCI Service Fittings Double outlet Ball Valve or Needle Cock (three fitting maximum) Electrical Receptacle 20 amp, 120 VAC, Specification Grade Standard or GFCI (available on either post) Left Post UL certification available on request. Right Post Double-sided - 6 Post Workstation not available in North America EW-04/12r1-9

Double-sided Support Frame Options Internal Service Hoses are required to mount services on the Workstation Support Frame. They are factory installed when ordered with the service fitting and consist of either a reinforced PVC or braided stainless steel, 3 8" hose with a male 3 8" IPS outlet nipple and a female 3 8" IPS inlet at the top of the post. They are available in three lengths that correspond the three mounting locations in the post or in Extended Lengths, reaching 3' or 6' above the post top. Internal Service Hoses Service Fittings Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 40" W-6132-40 Top Hole 44" W-6132-44 Middle Hole 48" W-6132-48 Bottom Hole 84" W-6132-84 Extended Length 120" W-6132-20 Extended Length Double Ball Valves consist of a 90 wye turret with two chrome plated valves which provide on/off control of gas, air, or vacuum at pressures up to 75 PSI. Needle Point Cocks consist of a 90 wye turret with two chrome plated valves with a brass floating cone and integral brass seat. They provide metering control of laboratory gases at pressures up to 60 PSI. Double Ball Valve 3/8" IPS Female Inlet Part Number Service W-0602-0A Air W-0602-0G Gas W-0602-0N Nitrogen W-0602-0R Argon W-0602-0V Vacuum W-0602-00 Specify Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 40" W-6232-40 Top Hole 44" W-6232-44 Middle Hole 48" W-6232-48 Bottom Hole 84" W-6232-84 Extended Length 120" W-6232-20 Extended Length Specify service fitting locations on Workstation Support Frame Layout Sheet Double Needle Point Cock 3/8" IPS Female Inlet Part Number Service W-0603-0A Air W-0603-0G Gas W-0603-0N Nitrogen W-0603-0R Argon W-0603-0V Vacuum W-0603-00 Specify Power Bar Electrical Fixtures Specify Power Bar Elecrtrical Fixture locations on Workstation Support Frame Layout Sheet (see page 46 and 47) Support Post Electrical Fixtures Specify Post Electrical Fixture locations on Workstation Support Frame Layout Sheet (see page 46 and 47) Data/Com Outlet Part Number Device 0720-0K Black RJ45 Duplex 0720-0V Ivory RJ45 Duplex 120 VAC Outlet Part Number Device 0581-0K Black 20 amp Duplex 0581-0V Ivory 20 amp Duplex 0656-0K Black 20 amp GFI Duplex 0656-0V Ivory 20 amp GFI Duplex EW-04/12r1-10 120 VAC Outlet Part Number Device 0581-0K Black 20 amp Duplex 0581-0V Ivory 20 amp Duplex 0656-0K Black 20 amp GFI Duplex 0656-0V Ivory 20 amp GFI Duplex

Double-sided Support Frame Accessories Service Hoses are required to carry services from overhead service carriers to the top of the Support Frame unless Extended Length Internal Service Hoses are used. They may be used with Keyed Quick-Connect Fittings or attached directly to the Internal Service Hoses. Hoses are available in reinforced PVC, polyurethane, or braided stainless steel. Power Cords are required to carry electrical power from the overhead service carriers to the top of the Support Frame. The SJ 12/3 cord is available in various configurations. Keyed Quick-Connect Fittings are available for Hoses and Internal Service Tubes to ease service connection during bench relocation. They are available in eight sizes (keys) which keeps service outlets from being switched. Service Hoses Power Cords Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W-1133-36 72" W-1133-72 Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W-1233-36 72" W-1233-72 Keyed Quick-Connect Fittings Coiled Polyurethane Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 72" W-1533-72 Single-circuit 3-wire 120 VAC Length Part Number Plug 36" W-5621-36 20A Straight Blade 72" W-5621-72 20A Straight Blade 36" W-5622-36 20A Twist-Lock 72" W-5622-72 20A Twist-Lock Dual-circuit 4-wire 120 VAC Length Part Number Plug 36" W-5623-36 20A Straight Blade 72" W-5623-72 20A Straight Blade 36" W-5624-36 20A Twist-Lock 72" W-5624-72 20A Twist-Lock Specify Power Cord locations on Workstation Support Frame Layout Sheet (see page 46 and 47) Male Quick-Connect Fitting 3/8" IPS Male Outlet Part Number W-8111-K1 W-8111-K2 W-8111-K3 W-8111-K4 W-8111-K5 W-8111-K6 W-8111-K7 W-8111-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Female Quick-Connect Fitting 3/8" IPS Female Inlet Part Number W-9112-K1 W-9112-K2 W-9112-K3 W-9112-K4 W-9112-K5 W-9112-K6 W-9112-K7 W-9112-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Key Number and Color Code Standard Service Female Body Sleeve Dia. Male Body Sleeve Dia. in. mm in mm K1 Black Helium 1.13 28.7 0.99 25.1 K2 Orange Air 1.16 29.5 1.02 25.8 K3 Green Cold Water 1.19 30.2 1.05 26.6 K4 Yellow Vacuum 1.22 31.0 1.08 27.4 K5 Blue Gas 1.24 31.5 1.11 28.1 K6 White 1.28 32.5 1.14 28.9 K7 Purple Argon 1.31 33.3 1.17 29.7 K8 Brown Nitrogen 1.34 34.0 1.20 30.4 EW-04/12r1-11

Worksurface Frames Worksurface Frames are available in five lengths to match the Workstation Support Frames, and are adjustable in height from 30" - 36" on 1" increments. The frames are fabricated from 11 gauge powder coated steel with 2" diameter, telescoping, powder coated, steel legs. They are furnished with required installation hardware. Enterprise Workstations 22" Deep Frames are designed for use with 24" deep Work Tops, 28" Deep Frames are designed for 30" deep Work Tops. Cabinet Stops are designed to locate Mobile Base Cabinets in line with the front of the Workstation. Fabricated from 16 gauge, powder coated, steel, they are furnished with all required installation hardware. Worksurface Frames 22" Deep Frame 42" L FE80M362242-00 48" L FE80M362248-00 60" L FE80M362260-00 72" L FE80M362272-00 96" L FE80M362296-00 28" Deep Frames 42" L FE80M362842-00 48" L FE80M362848-00 60" L FE80M362860-00 72" L FE80M362872-00 96" L FE80M362896-00 Cabinet Stops Cabinet Stops for 22" Deep Frame 42" L FE85M022242-00 48" L FE85M022248-00 60" L FE85M022260-00 72" L FE85M022272-00 96" L FE85M022296-00 Cabinet Stops for 28" Deep Frame 42" L FE85M022842-00 48" L FE85M022848-00 60" L FE85M022860-00 72" L FE85M022872-00 96" L FE85M022896-00 EW-04/12r1-12

Free-standing Table Frames Free-standing Table Frames consist of a Worksurface Frame and a pair of Rear Adjustable Legs and are available in five lengths, and are adjustable in height from 30" - 36" on!" increments. The frames are fabricated from 11 gauge powder coated steel with 2" diameter, telescoping, powder coated, steel legs. Furnished with required installation hardware. Free-standing Tables Rear Adjustable Legs match the telescoping legs at the front of Worksurface Frames. They may be attached to any of the Worksurface Frames to create a Free-standing Table Frame. (sold in pairs) Cabinet Hanging Rail Kit may be added to the 28" deep Worksurface Frame to hang Suspended Base Cabinets. 22" Deep Table Frame Assemblies 42" L FE50M362242-00 48" L FE50M362248-00 60" L FE50M362260-00 72" L FE50M362272-00 96" L FE50M362296-00 28" Deep Deep Table Frame Assemblies 42" L FE50M362842-00 48" L FE50M362848-00 60" L FE50M362860-00 72" L FE50M362872-00 96" L FE50M362896-00 Rear Adjustable Legs Cabinet Hanging Rail Kit for 28" deep frames 30" - 36"H FE88M360202-00 pair 42" L FE89M020242-00 48" L FE89M020248-00 60" L FE89M020260-00 72" L FE89M020272-00 96" L FE89M020296-00 For 28" Deep Worksurface Frames Only EW-04/12r1-13

Workstation Work Tops Workstation Work Tops are available in Kemresin, Phenolic Resin, or Plastic Laminate. All are 1" thick, have a front and rear overhang of 1" and are flush with the ends of the Worksurface Frames. Rear corners are notched to fit around Workstation Support Frames. All edges are finished. Enterprise Workstations Powder Coated Steel Back Splash is 5" high and mounted to the Worksurface frame to provide a 4" high splash. Fabricated from 11 gauge powder coated steel, it is furnished complete with installation hardware.available in Black only. Workstation Work Tops 24" Deep Work Top for use on 22" Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42" L FE95R012442-00- Color Options FE95T012442-00 FE95P012442-00 48" L FE95R012448-00- BK = Black FE95T012448-00 FE95P012448-00 60" L FE95R012460-00- GR = Grey FE95T012460-00 FE95P012460-00 72" L FE95R012472-00- SL = Slate FE95T012472-00 FE95P012472-00 96" L FE95R012496-00- PT = Putty FE95T012496-00 FE95P012496-00 30" Deep Work Top for use on 28" Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42 L FE95R013042-00- Color Options FE95T013042-00 FE95P013042-00 48 L FE95R013048-00- BK = Black FE95T013048-00 FE95P013048-00 60 L FE95R013060-00- GR = Grey FE95T013060-00 FE95P013060-00 72 L FE95R013072-00- SL = Slate FE95T013072-00 FE95P013072-00 96 L FE95R013096-00- PT = Putty FE95T013096-00 FE95P013096-00 Black Powder Coated Steel Back Splash 42" L FE95M040042-00 48" L FE95M040048-00 60" L FE95M040060-00 72" L FE95M040072-00 96" L FE95M040096-00 EW-04/12r1-14

Free-standing Table Work Tops Free-standanding Table Work Tops are available in Kemresin, Phenolic Resin, or Plastic Laminate. All are 1" thick, have a 1" front overhang, a 1" rear overhang, and are flush with the ends of the Worksurface Frames. All edges are finished. Powder Coated Steel Back Splash is 5" high and mounted to the Worksurface frame to provide a 4" high splash. Fabricated from 11 gauge powder coated steel, it is furnished complete with installation hardware. Available in Black only. Free-standing Table Work Tops 24 Deep Work Top for use on 22 Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42 L FE96R012442-00- Color Options FE96T012442-00 FE96P012442-00 48 L FE96R012448-00- BK = Black FE96T012448-00 FE96P012448-00 60 L FE96R012460-00- GR = Grey FE96T012460-00 FE96P012460-00 72 L FE96R012472-00- SL = Slate FE96T012472-00 FE96P012472-00 96 L FE96R012496-00- PT = Putty FE96T012496-00 FE96P012496-00 30 Deep Work Top for use on 28 Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42 L FE96R013042-00- Color Options FE96T013042-00 FE96P013042-00 48 L FE96R013048-00- BK = Black FE96T013048-00 FE96P013048-00 60 L FE96R013060-00- GR = Grey FE96T013060-00 FE96P013060-00 72 L FE96R013072-00- SL = Slate FE96T013072-00 FE96P013072-00 96 L FE96R013096-00- PT = Putty FE96T013096-00 FE96P013096-00 Black Powder Coated Steel Back Spash 42" L FE96M040042-00 48" L FE96M040048-00 60" L FE96M040060-00 72" L FE96M040072-00 96" L FE96M040096-00 EW-04/12r1-15

Enterprise Shelving Features: May be used with Workstation Support Frames or individual Wall Standards Shelving available in lengths of 29", 35", 40", 46" and 47" to match Workstation Support Frames Shelving available with or without front retaining rods Enterprise Workstations back edge of all shelves Task Lighting available for mounting under shelves Wall Standards available in heights of 30", 36", 42", 48" and 84" Shelf Retaining Lips available for front or EW-04/12r1-16

Wall Standards & Shelving Accessories Enterprise Wall Standards are fabricated from 11 gauge, 2" dia. powder coated steel tubing, with 1" steel stand offs for mounting on wall. Full height wall standard is furnished with leveling foot. All Enterprise Wall Standards are slotted on 1" centers and are designed to accept two shelf brackets mounted side by side. (Wall mounting hardware is not included.) Wall Standards Shelf Retaining Lips are fabricated from 16 ga. powder coated steel, and may be added to the front or back of any Enterprise Shelf. (required hardware included) Task Lighting consists of a thin-profile, specification grade, white, painted steel housing, 1" high by 3 1 2" housing. It is UL listed and furnished with rocker switch, single outlet, lamp, and six foot cord. Full Height Wall Standard 84" H FE10M840202-00 each Shelf Retaining Lip Task Lighting Upper Wall Standards 30" L FE10M300202-00 each 36" L FE10M360202-00 each 42" L FE10M420202-00 each 48" L FE10M480202-00 each Nominal Length Part Number Fits 27" FE63M020129-00 29" Shelf each 33" FE63M020135-00 35" Shelf each 38" FE63M020140-00 40" Shelf each 44" FE63M020146-00 46" Shelf each 45" FE63M020147-00 47" Shelf each Nominal Actual Length Length Part Number Fits Under 24" 21 1 4" F-5314-00 29" - 35" Shelves 36" 34 3 8" F-5316-00 40" - 47" Shelves EW-04/12r1-17

Adjustable Height Shelves Adjustable Height Shelves consist of a pair of 11 gauge powder coated steel Shelf Brackets and a Shelf. Shelves are adjustable in height on 1" centers from 55" to 80" above floor. Shelves overhang the rear of the shelf bracket by 3" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Enterprise Workstations Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin Adjustable Shelves 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 12" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE21M040940-30 FE21T040940-30 FE21W040940-31 FE21W040940-32 46" L FE21M040946-30 FE21T040946-30 FE21W040946-31 FE21W040946-32 29" L FE21M040929-30 FE21T040929-30 FE21W040929-31 FE21W040929-32 35" L FE21M040935-30 FE21T040935-30 FE21W040935-31 FE21W040935-32 47" L FE21M040947-30 FE21T040947-30 FE21W040947-31 FE21W040947-32 12" Deep Bracket 15" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE21M051240-30 FE21T051240-30 FE21W051240-31 FE21W051240-32 46" L FE21M051246-30 FE21T051246-30 FE21W051246-31 FE21W051246-32 29" L FE21M051229-30 FE21T051229-30 FE21W051229-31 FE21W051229-32 35" L FE21M051235-30 FE21T051235-30 FE21W051235-31 FE21W051235-32 47" L FE21M051247-30 FE21T051247-30 FE21W051247-31 FE21W051247-32 18" Deep Bracket 21" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE21M061840-30 FE21T061840-30 FE21W061840-31 FE21W061840-32 46" L FE21M061846-30 FE21T061846-30 FE21W061846-31 FE21W061846-32 29" L FE21M061829-30 FE21T061829-30 FE21W061829-31 FE21W061829-32 35" L FE21M061835-30 FE21T061835-30 FE21W061835-31 FE21W061835-32 47" L FE21M061847-30 FE21T061847-30 FE21W061847-31 FE21W061847-32 EW-04/12r1-18

Adjustable Height Shelves Adjustable Height Shelves with Retaining Rod consist of a pair of 11 gauge powder coated steel Shelf Brackets, a Shelf, and a 1 4" diameter powder coated steel rod fastened to the front ot the shelf brackets. Shelves are adjustable in height on 1" centers from 55" to 80" above floor. Shelves overhang the rear of the shelf bracket by 3" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Adjustable Shelves with Retaining Rod Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 12" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE22M040940-30 FE22T040940-30 FE22W040940-31 FE22W040940-32 46" L FE22M040946-30 FE22T040946-30 FE22W040946-31 FE22W040946-32 29" L FE22M040929-30 FE22T040929-30 FE22W040929-31 FE22W040929-32 35" L FE22M040935-30 FE22T040935-30 FE22W040935-31 FE22W040935-32 47" L FE22M040947-30 FE22T040947-30 FE22W040947-31 FE22W040947-32 12" Deep Bracket 15" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE22M051240-30 FE22T051240-30 FE22W051240-31 FE22W051240-32 46" L FE22M051246-30 FE22T051246-30 FE22W051246-31 FE22W051246-32 29" L FE22M051229-30 FE22T051229-30 FE22W051229-31 FE22W051229-32 35" L FE22M051235-30 FE22T051235-30 FE22W051235-31 FE22W051235-32 47" L FE22M051247-30 FE22T051247-30 FE22W051247-31 FE22W051247-32 18" Deep Bracket 21" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE22M061840-30 FE22T061840-30 FE22W061840-31 FE22W061840-32 46" L FE22M061846-30 FE22T061846-30 FE22W061846-31 FE22W061846-32 29" L FE22M061829-30 FE22T061829-30 FE22W061829-31 FE22W061829-32 35" L FE22M061835-30 FE22T061835-30 FE22W061835-31 FE22W061835-32 47" L FE22M061847-30 FE22T061847-30 FE22W061847-31 FE22W061847-32 EW-04/12r1-19

Top Shelves Single-sided Support Frame Top Shelves consist of a pair of 11 gauge powder coated steel Shelf Brackets and a Shelf. Top Shelves are designed to mount at the top of the support assembly but are adjustable in height on 1" centers from 60" to 84" above floor. Single-sided Support Frame Top Shelves overhang the rear of the shelf bracket by 2" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Enterprise Workstations Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin Top Shelf Assembly for Single-sided Support Frames 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 11" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M040940-20 FE28T040940-20 FE28W040940-21 FE28W040940-22 46" L FE28M040946-20 FE28T040946-20 FE28W040946-21 FE28W040946-22 29" L FE28M040929-20 FE28T040929-20 FE28W040929-21 FE28W040929-22 35" L FE28M040935-20 FE28T040935-20 FE28W040935-21 FE28W040935-22 47" L FE28M040947-20 FE28T040947-20 FE28W040947-21 FE28W040947-22 12" Deep Bracket 14" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M051240-20 FE28T051240-20 FE28W051240-21 FE28W051240-22 46" L FE28M051246-20 FE28T051246-20 FE28W051246-21 FE28W051246-22 29" L FE28M051229-20 FE28T051229-20 FE28W051229-21 FE28W051229-22 35" L FE28M051235-20 FE28T051235-20 FE28W051235-21 FE28W051235-22 47" L FE28M051247-20 FE28T051247-20 FE28W051247-21 FE28W051247-22 18" Deep Bracket 20" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M061840-20 FE28T061840-20 FE28W061840-21 FE28W061840-22 46" L FE28M061846-20 FE28T061846-20 FE28W061846-21 FE28W061846-22 29" L FE28M061829-20 FE28T061829-20 FE28W061829-21 FE28W061829-22 35" L FE28M061835-20 FE28T061835-20 FE28W061835-21 FE28W061835-22 47" L FE28M061847-20 FE28T061847-20 FE28W061847-21 FE28W061847-22 EW-04/12r1-20

Top Shelves Double-sided Support Frame Top Shelves consist of a pair of 11 gauge powder coated steel Shelf Brackets and a Shelf. Top Shelves are designed to mount at the top of the support assembly but are adjustable in height on 1" centers from 60" to 84" above floor. Double-sided Support Frame Top Shelves overhang the rear of the shelf bracket by 1" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin Top Shelf Assembly for Double-sided Support Frames 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 10" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M040940-10 FE28T040940-10 FE28W040940-11 FE28W040940-12 46" L FE28M040946-10 FE28T040946-10 FE28W040946-11 FE28W040946-12 29" L FE28M040929-10 FE28T040929-10 FE28W040929-11 FE28W040929-12 35" L FE28M040935-10 FE28T040935-10 FE28W040935-11 FE28W040935-12 47" L FE28M040947-10 FE28T040947-10 FE28W040947-11 FE28W040947-12 12" Deep Bracket 13" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M051240-10 FE28T051240-10 FE28W051240-11 FE28W051240-12 46" L FE28M051246-10 FE28T051246-10 FE28W051246-11 FE28W051246-12 29" L FE28M051229-10 FE28T051229-10 FE28W051229-11 FE28W051229-12 35" L FE28M051235-10 FE28T051235-10 FE28W051235-11 FE28W051235-12 47" L FE28M051247-10 FE28T051247-10 FE28W051247-11 FE28W051247-12 18" Deep Bracket 19" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M061840-10 FE28T061840-10 FE28W061840-11 FE28W061840-12 46" L FE28M061846-10 FE28T061846-10 FE28W061846-11 FE28W061846-12 29" L FE28M061829-10 FE28T061829-10 FE28W061829-11 FE28W061829-12 35" L FE28M061835-10 FE28T061835-10 FE28W061835-11 FE28W061835-12 47" L FE28M061847-10 FE28T061847-10 FE28W061847-11 FE28W061847-12 EW-04/12r1-21

Steel and Wood Cabinets Features: Steel Base Cabinets Electrostatically applied, chemical resistant, powder coat finish available in colors to compliment any laboratory environment. Heavy gauge formed and welded steel cabinet body construction provides strength and durability. One piece drawer body-bottom, back, sides and inner drawer head, radiused all four sides. One-piece case bottom and horizontal front rail Furnished standard with finished back Exclusive positive door catch Institutional type five-knuckle offset door hinges rated for 150 pound loads Enterprise Workstations Wood Base Cabinets Multiple coat, chemical resistant finish system formulated to highlight the natural grain patterns. Dovetailed drawer construction with nine-ply hardwood plywood drawer sides. 3/4" seven-ply hardwood plywood end panels, bottom and shelf, with solid hardwood facing. Full extention, ball bearing, 100lb. load rated, drawer slides, standard on all drawers and pullboards. 3/4" seven-ply hardwood plywood finished back dadoed into end panels and bottom. Institutional type five-knuckle offset door hinges rated for 150 pound loads EW-04/12r1-22

Base Cabinet Door & Drawer Styles Steel Style-01 Steel Style-11 Wood Style-1 Square Edge Multiple Pull Options Radius Lip, Semi-Overlay Construction Multiple Pull Options Inset Style Overlay Style Conventional Steel Style-02 Steel Style-12 Wood Style-3 Square Edge Recessed Aluminum Pull Radius Edge, Semi-Overlay Construction Integral Machined Pull Inset Style Overlay Style Silhouette Steel Style-14 Wood Style-5 Radius Top & Bottom Edge Multiple Pull Options Square Edge, Full Overlay Construction Multiple Pull Options Overlay Style Steel Style-15 Contemporary Radius Top & Bottom Edge Recessed Aluminum Pull Overlay Style Steel Style-16 Oak or Maple Door and Drawer Front Multiple Pull Options Overlay Style EW-04/12r1-23

Steel and Wood Cabinets Base Cabinet Catalog Number Explanation Cabinet Type B = Open Cupboard Cabinet C = All Cupboard Cabinet D = All Drawer Cabinet E = Drawer & Cupboard Cabinet G = Special Purpose Cabinet M = Mobile Cabinet Drawer and Door Configuration Cabinetry Material W = Wood M = Steel M25W332218-1011 Steel Furniture Style Hardware Material Selections M25M332218-0101 Door and Drawer Head Style 00 = No Option 01 = Inset Square Edge Steel Bail Type Pull 02 = Inset Square Edge Steel Recessed Pull 11 = Overlay Square Edge Steel Bail Type Pull 12 = Overlay Square Edge Steel Recessed Pull 14 = Overlay Rounded Edge Steel Bail Type Pull 15 = Overlay Rounded Edge Steel Recessed Pull 16 = Overlay Square Edge Wood Bail Type Pull Door and Drawer Head Material 0 = Steel 1 = Plain Sliced Red Oak 2 = Plain Sliced White Maple Available for Style 16 only Wood Furniture Style Hardware Material Selections Door and Drawer Head Style 0 = No Option 1 = Conventional Radius Lip 3 = Silhouette 5 = Contemporary Full Overlay Hinge Type 0 = Stainless Steel Five Knuckle 2 = Black Powder Coated Five Knuckle 3 = White Powder Coated Five Knuckle Enterprise Workstations Style-Hardware Material Selection See Below Special Configurations L = Left Hand Swing Cabinet Length (Nominal in Inches) Cabinet Depth (Nominal in Inches) Cabinet Height 19 = 19 1 /4" 20 = 19 5 /8" 25 = 25" 26 = 25 15 /16" 27 = 26 3 /4" 33 = 33" M25W332218-1011 Maple exterior available for Style 1 and Style 5 only Pull Type 0 = No Option 1 = Rounded Aluminum 2 = Black Wire 3 = White Wire 4 = Stainless Steel Wire 6 = Chrome Plated Wire 8 = Square Aluminum Pull Type 0 = No Pull* 1 = Rounded Aluminum 2 = Black Wire 3 = White Wire 4 = Stainless Steel Wire 5 = Integral Machined 6 = Chrome Plated Wire 8 = Square Aluminum * pull holes bored on 4 centers but no pull provided Cabinet Exterior 1 = Plain Sliced Red Oak 2 = Plain Sliced White Maple EW-04/12r1-24

Base Cabinet Information 17u Drawer Code Door Code Base cabinets are designed on a unit system to allow maximum flexibility in the selection of drawer and/or cupboard door sizes. The charts below show both the actual height as well as the unit height of both Steel and Wood Base Cabinets The adjacent tables indicate the unit height, actual height and inside clearance dimensions of the base cabinets drawers and cupboards. Simply match the unit code shown on the cabinet to the appropriate code in the tables. Steel Cabinet Dimensions Descriptive Height Dimensional Height Unit Height Standing Mobile Sitting Mobile 25" High Suspended 19" High Suspended 33" 54 units 26 3 4" 41 units 25" 48 units 19 1 4" 36 units Wood Cabinet Dimensions Descriptive Height Dimensional Height Unit Height Standing Mobile Sitting Mobile 33" 22 units 26 3 4" 17 units 25" High Suspended 2515 16" 20 units 19" High Suspended 19 5 8" 15 units Steel Drawer Size Codes Drawer Inside Dimensions Units Head Clear/ High Length Height Height (Front-to-Back) 6 2. 5 8" 1. 9 16" 18" 8 3. 9 16" 2. 1 2" 18" 9 4" 3." 18" 10 4. 1 2" 3. 7 16" 18" 12 5. 7 16" 4. 3 8" 18" 15 6. 7 8" 5. 13 16" 18" 16 7. 5 16" 6. 5 16" 18" 18 8. 5 16" 7. 1 4" 18" 20 9. 1 4" 8. 3 16" 18" 24 11. 1 4" 10. 1 8" 18" 3 1. 3 16" Pullboard Steel Drawer Width I.D. (side-to-side) Base Number of Drawers Across Cabinet Length 1 2 3 15" 10. 5 8" 18" 13. 5 8" 21" 16. 5 8" 24" 19. 5 8" 7. 5 8" 30" 25. 5 8" 10. 5 8" 36" 31. 5 8" 13. 5 8" 7. 5 8" 42" 37. 5 8" 16. 5 8" 48" 43. 5 8" 19. 5 8" 11. 5 8" Steel Cupboard Size Codes Inside Dimensions Units Door Height Depth High Height (Top-to-Bottom) (Front-to-Back) 36 16. 13 16" 16. 5 8" 20 1 2" 45 21. 1 16" 20. 7 8" 20 1 2" 48 22. 1 2" 22. 1 4" 20 1 2" 54 25. 3 8" 26. 1 8" 20 1 2" 60 28. 3 16" 28" 20 1 2" Steel Cupboard Width I.D. (side-to-side) Base Number of Cupboards Across Cabinet Length 1 2 3 15" 12" 18" 15" 21" 18" 24" 21" 9" 30" 27" 12" 36" 33" 15" 9" 42" 39" 18" 48" 45" 21" 13" Wood Drawer Size Codes Drawer Inside Dimensions Units Head Clear/ High Length Height Height (Front-to-Back) 2 Pullboard 14" 3 2. 13 16" 2 1 /8" 16 3 /4" 4 4 1 /16" 3 3 /8" 16 3 /4" 5 5 5 /16" 4 5 /8" 16 3 /4" 6 6 9 /16" 5 7 /8" 16 3 /4" 7 7 13 /16" 7 1 /8" 16 3 /4" 8 9 1 /8" 8 3 /8" 16 3 /4" 10 11 5 /8" 10 7 /8" 16 3 /4" 12 14 1 /8" 13 1 /8" 16 3 /4" 1 /4" less if drawer is top drawer in cabinet Wood Drawer Width I.D. (side-to-side) Base Number of Drawers Across Cabinet Length 1 2 3 15" 11 1 2" 18" 14 1 2" 21" 17 1 2" 24" 20 1 2" 8 3 4" 30" 26 1 2" 11 3 4" 36" 32 1 2" 14 3 4" 8 3 4" 42" 38 1 2" 17 3 4" 11 3 4" 48" 44 1 2" 20 3 4" 14 3 4" Wood Cupboard Size Codes Inside Dimensions Units Opening Height Depth High Height (Top-to-Bottom) (Front-to-Back) 12 14 3 /8" 14 3 /8" 19 1 /2" 15 18 1 /8" 18 1 /8" 19 1 /2" 16 19 3 /8" 19 3 /8" 19 1 /2" 17 20 5 /8" 20 5 /8" 19 1 /2" 18 21 7 /8" 21 7 /8" 19 1 /2" 20 24 1 /4" 24 1 /4" 19 1 /2" 22 26 3 /4" 26 3 /4" 19 1 /2" 24 29 1 /4" 29 1 /4" 19 1 /2" Wood Cupboard Width I.D. (side-to-side) Base Number of Cupboards Across Cabinet Length 1 2 3 15" 13 1 2" 18" 16 1 2" 21" 19 1 2" 24" 22 1 2" 10 3 4" 30" 28 1 2" 13 3 4" 36" 34 1 2" 16 3 4" 10 3 4" 42" 40 1 2" 19 3 4" 12 3 4" 48" 46 1 2" 22 3 4" 14 3 4" The dimensions shown in these tables are minimums. They may be slightly larger on some cabinet types and/or styles. EW-04/12r1-25

Wood Sitting Height Mobile Cabinets 22" nominal L 26¾" These Mobile Cabinets are 26 3 4" high and a nominal 22" deep. Lengths as shown. They are designed to fit under 30" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Cupboard Cabinets Cupboard Cabinets with Pullboards 17u 17u 1 1 M10W272215L 15"L M10W272218L 18"L M10W272221L 21"L M10W272224L 24"L M10W272215-15"L M10W272218-18"L M10W272221-21"L M10W272224-24"L M15W272215L 15"L M15W272218L 18"L M15W272221L 21"L M15W272224L 24"L M15W272215-15"L M15W272218-18"L M15W272221-21"L M15W272224-24"L Drawer/Cupboard Cabinets Drawer/Cupboard Cabinets with Pullboards 3u 3u 12u 12u 12u 12u M20W272215L 15"L M20W272218L 18"L M20W272221L 21"L M20W272224L 24"L M20W272215-15"L M20W272218-18"L M20W272221-21"L M20W272224-24"L M25W272215L 15"L M25W272218L 18"L M25W272221L 21"L M25W272224L 24"L M25W272215-15"L M25W272218-18"L M25W272221-21"L M25W272224-24"L Drawer Cabinets Drawer Cabinets with Pullboards 6u 6u 3u 4u M30W272215-15"L M30W272218-18"L M30W272221-21"L M30W272224-24"L M40W272215-15"L M40W272218-18"L M40W272221-21"L M40W272224-24"L M35W272215-15"L M35W272218-18"L M35W272221-21"L M35W272224-24"L 7u 3u 4u 10u 10u 10u M60W272215-15"L M60W272218-18"L M60W272221-21"L M60W272224-24"L M62W272215-15"L M62W272218-18"L M62W272221-21"L M62W272224-24"L M65W272215-15"L M65W272218-18"L M65W272221-21"L M65W272224-24"L EW-04/12r1-26

Wood Standing Height Mobile Cabinets 22" nominal L 33" These Mobile Cabinets are 33" high and a nominal 22" deep. Lengths as shown. They are designed to fit under 36" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Cupboard Cabinets Cupboard Cabinets with Pullboards 22u 22u 20u 20u M10W332215L 15"L M10W332218L 18"L M10W332221L 21"L M10W332224L 24"L M10W332215-15"L M10W332218-18"L M10W332221-21"L M10W332224-24"L M15W332215L 15"L M15W332218L 18"L M15W332221L 21"L M15W332224L 24"L M15W332215-15"L M15W332218-18"L M15W332221-21"L M15W332224-24"L Drawer/Cupboard Cabinets Drawer/Cupboard Cabinets with Pullboards 17u 17u 1 1 M20W332215L 15"L M20W332218L 18"L M20W332221L 21"L M20W332224L 24"L M20W332215-15"L M20W332218-18"L M20W332221-21"L M20W332224-24"L M25W332215L 15"L M25W332218L 18"L M25W332221L 21"L M25W332224L 24"L M25W332215-15"L M25W332218-18"L M25W332221-21"L M25W332224-24"L Drawer Cabinets Drawer Cabinets with Pullboards 4u 4u 4u M50W332215-15"L M50W332218-18"L M50W332221-21"L M50W332224-24"L M45W332215-15"L M45W332218-18"L M45W332221-21"L M45W332224-24"L 6u 6u 4u 4u 4u 10u 10u 10u 10u 10u M62W332215-15"L M62W332218-18"L M62W332221-21"L M62W332224-24"L M63W332215-15"L M63W332218-18"L M63W332221-21"L M63W332224-24"L M75W332215-15"L M75W332218-18"L M75W332221-21"L M75W332224-24"L M67W332215-15"L M67W332218-18"L M67W332221-21"L M67W332224-24"L EW-04/12r1-27

Steel Sitting Height Mobile Cabinets 23" L 26¾" These Mobile Cabinets are 26 3 4" high and a nominal 22" deep. Lengths as shown. They are designed to fit under 30" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Enterprise Workstations Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Drawer/Cupboard Cabinets Drawer/Cupboard Cabinets with Pullboards 9u 9u 6u 6u 32u 32u 32u 32u M20M272215L 15"L M20M272218L 18"L M20M272221L 21"L M20M272224L 24"L M20M272215-15"L M20M272218-18"L M20M272221-21"L M20M272224-24"L M25M272215L 15"L M25M272218L 18"L M25M272221L 21"L M25M272224L 24"L M25M272215-15"L M25M272218-18"L M25M272221-21"L M25M272224-24"L Drawer Cabinets Drawer Cabinets with Pullboards 10u 1 16u 8u 1 1 M30M272215-15"L M30M272218-18"L M30M272221-21"L M30M272224-24"L M35M272215-15"L M35M272218-18"L M35M272221-21"L M35M272224-24"L M36M272215-15"L M36M272218-18"L M36M272221-21"L M36M272224-24"L 8u 10u 10u 10u M45M272215-15"L M45M272218-18"L M45M272221-21"L M45M272224-24"L 8u 9u 6u 8u 24u 24u M62M272215-15"L M62M272218-18"L M62M272221-21"L M62M272224-24"L M67M272215-15"L M67M272218-18"L M67M272221-21"L M67M272224-24"L EW-04/12r1-28

Steel Standing Height Mobile Cabinets 23" L 33" Cupboard Cabinets These Mobile Cabinets are 26 3 4" high and a nominal 22" deep. Lengths as shown. They are designed to fit under 30" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. 54u 54u M10M332215L 15"L M10M332218L 18"L M10M332221L 21"L M10M332224L 24"L M10M332215-15"L M10M332218-18"L M10M332221-21"L M10M332224-24"L Drawer/Cupboard Cabinets with Pullboards 6u 6u 4 4 M25M332215L 15"L M25M332218L 18"L M25M332221L 21"L M25M332224L 24"L Drawer Cabinets Drawer Cabinets with Pullboards M25M332215-15"L M25M332218-18"L M25M332221-21"L M25M332224-24"L 9u 1 1 1 12u 12u 12u 1 6u 1 1 1 M40M332215-15"L M40M332218-18"L M40M332221-21"L M40M332224-24"L M45M332215-15"L M45M332218-18"L M45M332221-21"L M45M332224-24"L M46M332215-15"L M46M332218-18"L M46M332221-21"L M46M332224-24"L 6u 24u 12u 1 24u 24u M71M332215-15"L M71M332218-18"L M71M332221-21"L M71M332224-24"L M67M332215-15"L M67M332218-18"L M67M332221-21"L M67M332224-24"L EW-04/12r1-29

Add-A-Drawer Mobile Cabinets Add-A-Drawer Mobile Cabinets allow the removal of the top drawer assembly to convert the cabinet from standing height to sitting height. The base section of the Add A Drawer Cabinet is 26 3 4" high, the add-on drawer 6 1 4", for an overall height of 33". All Add-A-Drawer mobile cabinets have finished backs and counter-weights. The M95 four-drawer cabinet incorporates a drawer interlock system on the bottom three drawers. The cabinets are a nominal 22" deep with lengths as shown. They are designed to fit under 30" and 36" high Worksurface Frames. Cupboards have one adjustable shelf. Enterprise Workstations Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Wood Add-A-Drawer Mobile Cabinets Drawer/Cupboard Cabinets M90W332215L 15"L M90W332218L 18"L M90W332221L 21"L M90W332224L 24"L Drawer Cabinets M90W332215-15"L M90W332218-18"L M90W332221-21"L M90W332224-24"L M95W332215-15"L M95W332218-18"L M95W332221-21"L M95W332224-24"L EW-04/12r1-30

Mobile Cabinet Tops & Accessories 1" Thick Mobile Cabinet Tops are available in three depths, 22",23", or 24" and may be used on either Wood or Steel Mobile Cabinets. All edges are finished. Steel Mobile Cabinet Tops are fabricated from 18 gauge steel and finished to match the cabinet. They are designed for Steel Mobile Cabinets only and add less than 1/4" to the overall height of the cabinet. Mobile Cabinet Grabbar allows easier movement and relocation of mobile cabinets. Fabricated from Steel Mobile Cabinet Top for Steel Mobile Cabinets only top 22 7 /8"deep Length Painted Steel 15" F94M2315-00 18" F94M2318-00 21" F94M2321-00 24" F94M2324-00 powder coated steel or stainless steel, they may be used on either Steel or Wood Mobile Cabinets, with or without Tops. Bars must be attached in field with supplied screws and/or bolts. 1" Thick Mobile Cabinet Top 22" Deep flush to front of case Kemresin Black Black Length Kemresin Color Options Phenolic Resin Plastic Laminate 15" F94R2215-00- BK = Black F94T2215-00 F94P2215-00 18" F94R2218-00- GR = Grey F94T2218-00 F94P2218-00 21" F94R2221-00- PT = Putty F94T2221-00 F94P2221-00 24" F94R2224-00- SL = Slate F94T2224-00 F94P2224-00 23" Deep flush to overlay door/drawer fronts - 1" overhange of case Kemresin Black Black Length Kemresin Color Options Phenolic Resin Plastic Laminate 15" F94R2315-00- BK = Black F94T2315-00 F94P2315-00 18" F94R2318-00- GR = Grey F94T2318-00 F94P2318-00 21" F94R2321-00- PT = Putty F94T2321-00 F94P2321-00 24" F94R2324-00- SL = Slate F94T2324-00 F94P2324-00 24" Deep 1" overhange of overlay door/drawer fronts Kemresin Black Black Length Kemresin Color Options Phenolic Resin Plastic Laminate 15" F94R2415-00- BK = Black F94T2415-00 F94P2415-00 18" F94R2418-00- GR = Grey F94T2418-00 F94P2418-00 21" F94R2421-00- PT = Putty F94T2421-00 F94P2421-00 24" F94R2424-00- SL = Slate F94T2424-00 F94P2424-00 Mobile Cabinet Grabbar Length Painted Steel Stainless Steel 15" F73M0015-00 F73S0015-00 18" F73M0018-00 F73S0018-00 21" F73M0021-00 F73S0021-00 24" F73M0024-00 F73S0024-00 EW-04/12r1-31

Suspended Base Cabinets 19" High 22" nominal L 191/" 4 Steel 5 19 /"Wood 8 Cupboard Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 19" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 36u Steel Cabinet Length Wood Cabinet C03M192215L 15" C03W202215L C03M192218L 18" C03W202218L C03M192221L 21" C03W202221L C03M192224L 24" C03W202224L 1 36u Steel Cabinet Length Wood Cabinet C03M192215-15" C03W202215- C03M192218-18" C03W202218- C03M192221-21" C03W202221- C03M192224-24" C03W202224-1 Drawer Base Cabinets 18u 18u Steel Cabinet Length Wood Cabinet D00M192215-30" D00W202215-_0 D00M192218-36" D00W202218-_0 D00M192221-42" D00W202221-_0 D00M192224-48" D00W202224-_0 7u 8u 9u 9u 9u 9u Steel Cabinet Length Wood Cabinet D30M192215-15" D30W202215-_0 D30M192218-18" D30W202218-_0 D30M192221-21" D30W202221-_0 D30M192224-24" D30W202224-_0 3u 4u 4u 4u 12u 12u 12u Steel Cabinet Length Wood Cabinet D50M192215-15" D50W202215-_0 D50M192218-18" D50W202218-_0 D50M192221-21" D50W202221-_0 D50M192224-24" D50W202224-_0 EW-04/12r1-32

Suspended Base Cabinets 19" High 22" nominal L 191/" 4 Steel 5 19 /"Wood 8 Drawer Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 19" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 12u 24u 1 File Drawer with hangers Steel Cabinet Length Wood Cabinet D81M192215-15" D81W202215-_0 D81M192218-18" D81W202218-_0 D81M192221-21" D81W202221-_0 D81M192224-24" D81W202224-_0 10u 1 File Drawer with hangers 9u 24u Steel Cabinet Length Wood Cabinet D85M192215-15" D85W202215-_0 D85M192218-18" D85W202218-_0 D85M192221-21" D85W202221-_0 D85M192224-24" D85W202224-_0 3u 10u 8u 12u 16u Steel Cabinet Length Wood Cabinet D86M192215-15" D86W202215-_0 D86M192218-18" D86W202218-_0 D86M192221-21" D86W202221-_0 D86M192224-24" D86W202224-_0 3u 7u EW-04/12r1-33

Suspended Base Cabinets 25" High 22" nominal L 25" Steel 2515/ 16 "Wood Cupboard Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 25" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 48u Steel Cabinet Length Wood Cabinet C03M252215L 15" C03W262215L_0 C03M252218L 18" C03W262218L_0 C03M252221L 21" C03W262221L_0 C03M252224L 24" C03W262224L_0 20u 48u Steel Cabinet Length Wood Cabinet C03M252215-15" C03W262215-_0 C03M252218-18" C03W262218-_0 C03M252221-21" C03W262221-_0 C03M252224-24" C03W262224-_0 20u Drawer Base Cabinets 16u 16u 16u Steel Cabinet Length Wood Cabinet D00M252215-15" D00W262215-_0 D00M252218-18" D00W262218-_0 D00M252221-21" D00W262221-_0 D00M252224-24" D00W262224-_0 6u 7u 7u 8u 8u 16u 16u Steel Cabinet Length Wood Cabinet D08M252215-15" D08W262215-_0 D08M252218-18" D08W262218-_0 D08M252221-21" D08W262221-_0 D08M252224-24" D08W262224-_0 3u 3u 7u 7u 8u 8u 8u 8u 16u Steel Cabinet Length Wood Cabinet D10M252215-15" D10W262215-_0 D10M252218-18" D10W262218-_0 D10M252221-21" D10W262221-_0 D10M252224-24" D10W262224-_0 3u 3u 3u 4u 7u EW-04/12r1-34

Suspended Base Cabinets 25" High 22" nominal L 25" Steel 2515/ 16 "Wood Drawer Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 25" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 12u 12u 12u 12u Steel Cabinet Length Wood Cabinet D30M252215-15" D30W262215-_0 D30M252218-18" D30W262218-_0 D30M252221-21" D30W262221-_0 D30M252224-24" D30W262224-_0 24u 24u 2 File Drawers with hangers Steel Cabinet Length Wood Cabinet D81M252215L 15" D81W262215-_0 D81M252218L 18" D81W262218-_0 D81M252221L 21" D81W262221-_0 D81M252224L 24" D81W262224-_0 10u 10u 2 File Drawers with hangers 12u 12u Steel Cabinet Length Wood Cabinet D85M252215-15" D85W262215-_0 D85M252218-18" D85W262218-_0 D85M252221-21" D85W262221-_0 D85M252224-24" D85W262224-_0 24u 10u 1 File Drawer with hangers 1 File Drawer with hangers Drawer & Cupboard Base Cabinets 12u 36u Steel Cabinet Length Wood Cabinet E40M252215L 15" E40W262215L E40M252218L 18" E40W262218L E40M252221L 21" E40W262221L E40M252224L 24" E40W262224L 1 12u 36u Steel Cabinet Length Wood Cabinet E40M252215-15" E40W262215- E40M252218-18" E40W262218- E40M252221-21" E40W262221- E40M252224-24" E40W262224-1 EW-04/12r1-35

Upper Storage Cabinets Upper Cabinet Hanging System Enterprise Workstations With the use of an Upper Hanging Bracket and a pair of Hanging Rails, Kewaunee s standard Wall Cabinets can be mounted on the Enterprise Workstation Support Frame. Two Hanging Rails are snapped into the Support Frame slots. The Upper Hanging Bracket bolts to the top of the upper cabinet which then hangs on the upper Hanging Rail. The lower Hanging Rail allows the bottom of the cabinet to be securely fastened to the module. Hanging Rails and Upper Hanging Brackets, are finished to match the Workstation Support Frame and are furnished with all required hardware. Hanging Rails are furnished in pairs. Order the Upper Hanging Bracket in the same length as the Upper Cabinet. The Hanging Rails must be the same length as the Workstation Support Frame. Recommended for use with Double-sided Support Fames, and Single-sided Support Frames installed against a wall. Upper Hanging Bracket Part Number Length FE48M010418-00 18" FE48M010424-00 24" FE48M010430-00 30" FE48M010436-00 36" FE48M010442-00 42" FE48M010448-00 48" Hanging Rails Part Number Length FE49M020147-00 40" 1 pair FE49M020140-00 46" 1 pair FE49M020129-00 29 1 pair FE49M020135-00 35 1 pair FE49M020146-00 47" 1 pair Sliding Plate Glass Door Cabinets Depth Steel Cabinet Length Wood Cabinet Depth 12 3 4" W10M301330-0000 30" W10W301230-00_0 12" 12 3 4" W10M301336-0000 36" W10W301236-00_0 12" 12 3 4" W10M301342-0000 42" W10W301242-00_0 12" 12 3 4" W10M301348-0000 48" W10W301248-00_0 12" 16" W10M301630-0000 30" W10W301630-00_0 16" 16" W10M301636-0000 36" W10W301636-00_0 16" 16" W10M301642-0000 42" W10W301642-00_0 16" 16" W10M301648-0000 48" W10W301648-00_0 16" EW-04/12r1-36

Upper Cabinets 30" High These Upper Cabinets are 30" high and available in two depths. Lengths as shown. They are provided with two adjustable shelves, and are available in either wood or steel. Hanging system must be ordered separately. D Sliding Base Glazed Cabinets Door Cabinets Depth Steel Cabinet Length Wood Cabinet Depth 12 3 4" W11M301330-0000 30" W11W301230-00_0 12" 12 3 4" W11M301336-0000 36" W11W301236-00_0 12" 12 3 4" W11M301342-0000 42" W11W301242-00_0 12" 12 3 4" W11M301348-0000 48" W11W301248-00_0 12" 16" W11M301630-0000 30" W11W301630-00_0 16" 16" W11M301636-0000 36" W11W301636-00_0 16" 16" W11M301642-0000 42" W11W301642-00_0 16" 16" W11M301648-0000 48" W11W301648-00_0 16" D Sliding Base Panel Cabinets Door Cabinets Depth Steel Cabinet Length Wood Cabinet Depth 12 3 4" W12M301330-0 15" W12W301230-00_0 12" 12 3 4" W12M301336-0 18" W12W301236-00_0 12" 12 3 4" W12M301342-0 21" W12W301242-00_0 12" 12 3 4" W12M301348-0 24" W12W301248-00_0 12" 16" W12M301630-0 15" W12W301630-00_0 16" 16" W12M301636-0 18" W12W301636-00_0 16" 16" W12M301642-0 21" W12W301642-00_0 16" 16" W12M301648-0 24" W12W301648-00_0 16" Sliding Glazed and Panel Doors are suspended by roller from a track at the top of the cabinet. See page 24 for designating cabinet door style, door and cabinet material, and pull and hinge selection. Swinging Glazed Door Cabinets Left Hand Nominal Depth Steel Cabinet Length Wood Cabinet Depth 12 3 4" W20M301318L 18" W20W301218L 12 3 4" 12 3 4" W20M301324L 24" W20W301224L 12 3 4" 16" W20M301618L 18" W20W301618L 16 3 4" 16" W20M301624L 24" W20W301624L 16 3 4" Right Hand Nominal Depth Steel Cabinet Length Wood Cabinet Depth 12 3 4" W20M301318-18" W20W301218-12 3 4" 12 3 4" W20M301324-24" W20W301224-12 3 4" 16" W20M301618-18" W20W301618-16 3 4" 16" W20M301624-24" W20W301624-16 3 4" Nominal Depth Steel Cabinet Length Wood Cabinet Depth 12 3 4" W20M301330-30" W20W301230-12 3 4" 12 3 4" W20M301336-36" W20W301236-12 3 4" 12 3 4" W20M301342-42" W20W301242-12 3 4" 12 3 4" W20M301348-48" W20W301248-12 3 4" 16" W20M301630-30" W20W301630-16 3 4" 16" W20M301636-36" W20W301636-16 3 4" 16" W20M301642-42" W20W301642-16 3 4" 16" W20M301648-48" W20W301648-16 3 4" EW-04/12r1-37

Ceiling Service Panel Features: Designed to integrate into common ceiling grids for delivering plumbing, electrical, and data services to the lab bench Fits in standard 2' x 2' and 2' x 4' ceiling grids Power components are UL listed. Available in all standard powder coat finish colors May be customized to meet your project requirements Enterprise Workstations Accommodates multiple lab services including: Common gases, air, vacuum, and water High purity and special gases Power and data Accepts multiple fitting options including: Standard or fine control valves Pressure gauges and regulators Quick-connect valves Quick-connect fittings and hoses Communication and data outlets Electrical service outlets EW-04/12r1-38

Ceiling Service Panel Typical Ceiling Panel Layouts Six Station 2' x 4' panel Six groups of 4 service cutouts Six duplex receptacles cutouts Four data outlet cutouts Four Station 2' x 2' panel Four groups of 4 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Four Station 2' x 4' panel Four groups of 6 service cutouts Four duplex receptacles cutouts Four data outlet cutouts Four Station 2' x 2' panel Four groups of 3 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Four Station 2' x 4' panel Four groups of 4 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Two Station 2' x 2' panel Two groups of 6 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Two Station 2' x 4' panel Two groups of 6 service cutouts Four duplex receptacles cutouts Four data outlet cutouts Two Station 2' x 2' panel Two groups of 4 service cutouts Two duplex receptacles cutouts Two data outlet cutouts Two Station 2' x 4' panel Two groups of 4 service cutouts Two duplex recepticle cutouts Two data outlet cutouts One Station 2' x 2' panel One group of 6 service cutouts One duplex receptacle cutout One data outlet cutout EW-04/12r1-39

Ceiling Service Panel and Accessories Ceiling Service Panels are fabricated from powder coat 18 gauge steel in two sizes to fit standard ceiling grid. They can be punched to accept most electrical, data, or service fittings. (see pages 48 and 49 for Ceiling Service Panel Layout Sheets) Fittings and Fixtures must be ordered separately Electrical Fixtures are furnished complete with device, box and cover plate and are supplied loose, uninstalled. 24" x 24" Ceiling Service Panel 24" x 48" Ceiling Service Panel Part Number Dimensions (HxDxL) SC10M022424-00 1 1 2" x 24" x 24" Part Number Dimensions (HxDxL) SC10M022448-00 1 1 2" x 24" x 48" Electrical Fixtures Straight Blade 0581-1K Black 0581-1V Ivory 120 volt AC, specification grade, 20 amp, single duplex, receptacle. Straight Blade GFCI 0656-1K Black 0656-1V Ivory 120 Volt GFCI specification grade, 20 amp, ground fault protected, single duplex receptacle. Note: One ground fault interrupter will protect all outlets on the same circuit. Twist-Lock 20 amp 0620-1K Black 120 volt AC, specification grade, 20 amp, single receptacle. Data/Comm Outlet 0720-0K Black 0720-0V Ivory (2) RJ45 Outlets. Fits in 1 1 4" x 2" cutout. Dual-circuit Straight Blade 20 amp 0623-1K Black NEMA 15-20 4-wire, specification grade receptacle. Capable of carrying two 120 VAC, 20 amp circuits. Note: Check local electrical codes for compliance. Dual-circuit Twist-Lock 20 amp 0624-1K Black NEMA L15-20 4-wire, specification grade receptacle. Capable of carrying two 120 VAC, 20 amp circuits. Note: Check local electrical codes for compliance. EW-04/12r1-40

Ceiling Service Panel Accessories Service Hoses are required to carry services from overhead service carriers to the top of the Support Frame. They are available in reinforced PVC, polyurethane, or braided stainless steel. Power Cords are required to carry electrical power from the overhead service carriers to the top of the Support Frame. The SJ 12/3 cord is available in various configurations. Service Hoses Keyed Quick-Connect Fittings are available for Hoses and Internal Service Tubes to ease service connection and disconnection during bench relocation. They are available in eight sizes (keys) which keeps service outlets from being connected to the wrong service. Power Cords Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W-1133-36 72" W-1133-72 Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W-1233-36 72" W-1233-72 Coiled Polyurethane Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 72" W-1533-72 Single-circuit 3-wire 120 VAC Length Part Number Plug 36 W-5621-36 20A Straight Blade 72 W-5621-72 20A Straight Blade 36 W-5622-36 20A Twist-Lock 72 W-5622-72 20A Twist-Lock Dual-circuit 4-wire 120 VAC Length Part Number Plug 36 W-5623-36 20A Straight Blade 72 W-5623-72 20A Straight Blade 36 W-5624-36 20A Twist-Lock 72 W-5624-72 20A Twist-Lock Keyed Quick-Connect Fittings Male Quick-Connect Fitting 3/8" IPS Male Outlet Key Part Number Color W-8111-K1 Black W-8111-K2 Orange W-8111-K3 Green W-8111-K4 Yellow W-8111-K5 Blue W-8111-K6 White W-8111-K7 Purple W-8111-K8 Brown Female Panel Mount Quick-Connect Fitting 3/8" IPS Male Inlet Key Part Number Color W-9122-K1 Black W-9122-K2 Orange W-9122-K3 Green W-9122-K4 Yellow W-9122-K5 Blue W-9122-K6 White W-9122-K7 Purple W-9122-K8 Brown Key Number and Color Code Standard Service Female Body Sleeve Dia. Male Body Sleeve Dia. in. mm in mm K1 Black Helium 1.13 28.7 0.99 25.1 K2 Orange Air 1.16 29.5 1.02 25.8 K3 Green Cold Water 1.19 30.2 1.05 26.6 K4 Yellow Vacuum 1.22 31.0 1.08 27.4 K5 Blue Gas 1.24 31.5 1.11 28.1 K6 White 1.28 32.5 1.14 28.9 K7 Purple Argon 1.31 33.3 1.17 29.7 K8 Brown Nitrogen 1.34 34.0 1.20 30.4 EW-04/12r1-41

Enterprise Technical Data Enterprise Workstations Single-sided Workstation Support Frame & Worksurface Frame Dimensions 1" 2" 9" 5" 6" 30" maximum 12" 7" Shelves not shown for clearity 18" 83" 84" 1" 4/" 1 4 29"-36" 1" 2" 18"-24" 2" 1" 22"-28" 1" 24"-30" Front Elevation End Elevation Double-sided Workstation Support Frame & Worksurface Frame Dimensions 4" 5" 9" 9" 6" 30" maximum 12" 12" 7" Shelves not shown for clearity 18" 18" 1" 1" 4/" 1 4 28"-36" 29"-36" Front Elevation 2" 1" 18"-24" 21"-27" 24"-30" 6" 4" 48"-60" 18"-24" 21"-27" 24"-30" End Elevation 2" 1" EW-04/12r1-42

Enterprise Technical Data Free-standing Table 1" 1" 1/" 1 2 4/" 1 4 29"-36" 29"-36" 2" 2" 42" - 48" - 60" - 72" - 96" Front Elevation Single-sided Top Shelf Double-sided Top Shelf 20" 19" 19" 2" 18"-24" 2" 22"-28" 1" 24"-30" End Elevation 7" 18" 7" 18" 14" 13" 13" 6" 12" 6" 12" 11" 5" 5" 9" 10" 10" 9" End Elevation Wall Standard Grounding Details End Elevation Recommended Grounding Locations EW-04/12r1-43

Enterprise Technical Data Enterprise Workstation Support Frame Single-sided, 2 inch Tube Frame Note: Left Upright will accept either electrical fixtures or service fittings but not both. Services on Left Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required Left Data Option Right Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 3ft pigtail 6ft pigtail Cat-5e Cat-6 Enterprise Workstations FE30M8402XX-00 Note: Right Upright will accept either electrical fixtures or service fittings but not both. Services on Right Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Power Bar Receptacles (see options below) indicate service required indicate service required Electric on Left Upright Pre-wired as selected below Service Fittings W-0242-00 Ball Valve W-0243-00 Needle Point Electric on Right Upright Pre-wired as selected below Indicate outlet device type Indicate outlet device type 120VAC Duplex 120VAC GFI Duplex Electrical Devices Color both power & data devices Black Ivory 120VAC Duplex 120VAC GFI Duplex Length: (pick one only) 42" 48" Power Options: (indicate options required) Power Bar Receptacles (pick one only) Two (2) 120 VAC, 20 amp, Duplex Two (2) 120 VAC, 20 amp, GFI, Duplex None Power Bar/Upright Electric Wiring ( pick one only) 3ft 6ft Single Circuit pigtail, straight-blade plug 3ft 6ft Single Circuit pigtail, twist-lock plug 3ft 6ft Double Circuit pigtail, straight-blade plug 3ft 6ft Double Circuit pigtail, twist-lock plug None Electrical Pigtail Location (pick one only) Top of Left Upright Top of Right Upright N/A Piping Options: (indicate options required) Piping Option (pick one only) Pipe to top of upright Pipe to top of upright with extra 3ft of hose Pipe to top of upright with extra 6ft of hose Specify Extension Hoses Separately Piping/Hose End Option (pick one only) 3/8" IPS Threaded Female (standard) 1/4" Tube 3/8" IPS Threaded Male Keyed Male Quick-Connect Fitting Certification Options: UL Options (pick one only) No UL Listing (standard) UL Listed (add part no. X-020020 to project) LENGTH FE30M8402-00 PROJECT NAME: COLOR ITEM NO. QUANTITY EW-04/12-44

Enterprise Technical Data Enterprise Workstation Support Frame Single-sided, 2 inch Tube Frame Note: Left Upright will accept either electrical fixtures or service fittings but not both. Services on Left Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required Data Option Left Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 3ft pigtail 6ft pigtail Cat-5e Cat-6 FE30M8402XX-00 Data Option Right Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 6ft pigtail 3ft pigtail Cat-6 Cat-5e Note: Right Upright will accept either electrical fixtures or service fittings but not both. Services on Right Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Power Bar (see options below) indicate service required indicate service required Electric on Left Upright Pre-wired as selected below Service Fittings W-0242-00 Ball Cock W-0243-00 Needle Point Service Fittings Ball Cock W-0242-00 Needle Point W-0243-00 Electric on Right Upright Pre-wired as selected below Indicate outlet device type Indicate outlet device type 120VAC Duplex 120VAC GFI Duplex Electrical Devices Color both power & data devices Black Ivory 120VAC Duplex 120VAC GFI Duplex Length: (pick one only) 60" 72" 96" Power Options: (indicate options required) Power Bar Receptacles (pick one only) Four (4) 120 VAC, 20 amp, Duplex Four (4) 120 VAC, 20 amp, GFI, Duplex None Power Bar/Upright Electric Wiring ( pick one only) 3ft 6ft Single Circuit pigtail, straight-blade plug 3ft 6ft Single Circuit pigtail, twist-lock plug 3ft 6ft Double Circuit pigtail, straight-blade plug 3ft 6ft Double Circuit pigtail, twist-lock plug None Electrical Pigtail Location (pick one only) Top of Left Upright Top of Right Upright N/A Piping Options: (indicate options required) Piping Option (pick one only) Pipe to top of upright Pipe to top of upright with extra 3ft of hose Pipe to top of upright with extra 6ft of hose Specify Extension Hoses Separately Piping/Hose End Option (pick one only) 3/8" IPS Threaded Female (standard) 1/4" Tube 3/8" IPS Threaded Male Keyed Male Quick-Connect Fitting Certification Options: UL Options (pick one only) No UL Listing (standard) UL Listed (add part no. X-020020 to project) LENGTH FE30M8402-00 PROJECT NAME: COLOR ITEM NO. QUANTITY EW-04/12-45

Enterprise Technical Data Enterprise Workstation Support Frame Double-sided, 6 inch Tube Frame Enterprise Workstations FE30M8406XX-00 Services on Left Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Left Data Option Right Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 3ft pigtail 6ft pigtail Cat-5e Cat-6 (data port on both front & back) Power Bar Receptacles (back same as front) (see options below) Services on Right Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Electric on Left Upright Pre-wired as selected below Service Fittings W-0602-00 Ball Cock W-0603-00 Needle Point Electric on Right Upright Pre-wired as selected below Indicate outlet device type Indicate outlet device type 120VAC Duplex 120VAC GFI Duplex Electrical Devices Color both power & data devices Black Ivory 120VAC Duplex 120VAC GFI Duplex Length: (pick one only) 42" 48" Power Options: (indicate options required) Power Bar Receptacles (pick one only) Two (2) 120 VAC, 20 amp, Duplex (each side) Two (2) 120 VAC, 20 amp, GFI, Duplex (each side) None Power Bar/Upright Electric Wiring ( pick one only) 3ft 6ft Single Circuit pigtail, straight-blade plug 3ft 6ft Single Circuit pigtail, twist-lock plug 3ft 6ft Double Circuit pigtail, straight-blade plug 3ft 6ft Double Circuit pigtail, twist-lock plug None Electrical Pigtail Location (pick one only) Top of Left Upright Top of Right Upright N/A Piping Options: (indicate options required) Piping Option (pick one only) Pipe to top of upright Pipe to top of upright with extra 3ft of hose Pipe to top of upright with extra 6ft of hose Specify Extension Hoses Separately Piping/Hose End Option (pick one only) 3/8" IPS Threaded Female (standard) 1/4" Tube 3/8" IPS Threaded Male Keyed Male Quick-Connect Fitting Certification Options: UL Options (pick one only) No UL Listing (standard) UL Listed (add part no. X-020020 to project) LENGTH FE30M8406-00 PROJECT NAME: COLOR ITEM NO. QUANTITY EW-04/12-46

Enterprise Technical Data EW-04/12-47

Enterprise Technical Data Enterprise Workstations EW-04/12-48

Enterprise Technical Data EW-04/12-49

Alphabetical Index Enterprise Workstations Part Description Page Part Description Page Cabinets... 22 Dimensions... 25 Door & Drawer Styles... 23 Part Number Explanations... 24 Upper Storage Cabinets... 36 Rear Adjustable Legs... 13 Service Fittings.... 6,10,40 Quick-connect Fittings.... 7,11,41 Service Hoses... 7,11,41 Service Tubes... 6 Electrical Fixtures 120 VAC Receptacle... 6,10,40 Data/Com Receptacle... 6,10,40 GFCI Receptacle... 6,10,40 Power Bar... 6,10 Power Cord... 7,11,41 Service Panel Fixtures... 40 Twist-Lock Receptacle... 40 Workstation Frame Leg... 6,10 Free-standing Table... 13 Back Splash... 15 Rear Adjustable Legs... 13 Table Frame... 13 Table Work Top... 15 Mobile Cabinets... 26 Add-A-Drawer... 30 Steel Sitting Height... 28 Steel Standing Height... 29 Wood Sitting Height... 26 Wood Standing Height... 27 Mobile Cabinet Grab Bar... 31 Mobile Cabinet Tops... 31 Service Panel... 38 Shelving... 16 Adjustable Shelf Assembly...18-19 Retaining Lip... 17 Task Lighting.... 17 Top Shelf Assembly...20-21 Wall Standards... 17 Suspended Cabinets.... 32 19" High.... 32 25" High.... 34 Upper Storage Hanging System... 36 Hanging Bracket... 36 Hanging Rails... 36 Cabinets...36-37 Workstation Support Frame...4-11 Single-sided.... 4 Double-sided... 8 Workstation Work Top.... 14 Worksurface Frame... 12 Cabinet Stop... 12 Frames... 12 EW-04/12r1-50

Numerical Index Part Number Page Part Number Page Part Number Page 0581-0K 0581-1V... 6-10-40 0620-1K 0624-1K...40 0656-0K 0656-1V... 6-10-40 0720-0K 0720-0V... 6-10-40 C03M192215- C03M192224-....32 C03M192215L C03M192224L...32 C03M252215- C03M252224-....34 C03M252215L C03M252224L...34 C03W202215- C03W202224-....32 C03W202215L C03W202224L...32 C03W262215- C03W262224-....34 C03W262215L C03W262224L...34 D00M192215- D00M192224-....32 D00M252215- D00M252224-....34 D00W202215- D00W202224-....32 D00W262215- D00W262224-....34 D08M252215- D08M252224-....34 D08W262215- D08W262224-....34 D10M252215- D10M252224-....34 D10W262215- D10W262224-....34 D30M192215- D30M192224-....32 D30M252215- D30M252224-....35 D30W202215- D30W202224-....32 D30W262215- D30W262224-....35 D50M192215- D50M192224-....32 D50W202215- D50W202224-....32 D81M192215- D81M192224-....33 D81M252215- D81M252224-....35 D81W202215- D81W202224-....33 D81W262215- D81W262224-....35 D85M192215- D85M192224-....33 D85M252215- D85M252224-....35 D85W202215- D85W202224-....33 D85W262215- D85W262224-....35 D86M192215- D86M192224-....33 D86W202215- D86W202224-....33 E40M252215- E40M252224-...35 E40M252215L E40M252224L...35 E40W262215- E40W262224-....35 E40W262215L E40W262224L...35 F-5314-00 F-5316-00...17 F73M0015-00 F73S0024-00...31 F94M2315-00 F94M2324-00...31 F94P2215-00 F94P2224-00...31 F94P2315-00 F94P2324-00...31 F94P2415-00 F94P2424-00...31 F94R2215-00 F94R2224-00...31 F94R2315-00 F94R2324-00...31 F94R2415-00 F94R2424-00...31 F94T2215-00 F94T2224-00...31 F94T2315-00 F94T2324-00...31 F94T2415-00 F94T2424-00...31 FE10M300202-00 FE10M840202-00 17 FE21R040929-30 FE21R061847-30 18 FE21T040929-30 FE21T061847-30.18 FE21W040929-31 FE21W061847-32 18 FE22R040929-30 FE22R061847-30 19 FE22T040929-30 FE22T061847-30.19 FE22W040929-31 FE22W061847-32 19 FE-2581-1K FE-2581-1V...6 FE-2656-1K FE-2656-1V...6 FE28R040929-10 FE28R061847-10 21 FE28R040929-20 FE28R061847-20 20 FE28T040929-10 FE28T061847-10.21 FE28T040929-20 FE28T061847-20.20 FE28W040929-11 FE28W061847-12 21 FE28W040929-21 FE28W061847-22 20 FE30M840242-00 FE30M840296-00..4 FE30M840642-00 FE30M840696-00..8 FE48M010418-00 FE48M010448-00 36 FE49M020129-00 FE49M020147-00 36 FE50M362242-00 FE50M362896-00 13 FE63M020129-00 FE63M020147-00 17 FE80M362242-00 FE80M362896-00 12 FE85M022242-00 FE85M022896-00 12 FE88M360202-00...13 FE89M020242-00 FE89M020296-00 13 FE95M040042-00 FE95M040096-00 14 FE95P012442-00 FE95P013096-00.14 FE95R012442-00 FE95R013096-00 14 FE95T012442-00 FE95T013096-00.14 FE96M040042-00 FE96M040096-00 15 FE96P012442-00 FE96P013096-00.15 FE96R012442-00 FE96R013096-00 15 FE96T012442-00 FE96T013096-00.15 M10M332215- M10W332224-...29 M10M332215L M10W332224L...29 M10W272215- M10W272224-...26 M10W272215L M10W272224L...26 M10W332215- M10W332224-...27 M10W332215L M10W332224L...27 M15W272215- M15W272224-...26 M15W272215L M15W272224L...26 M15W332215- M15W332224-...27 M15W332215L M15W332224L...27 M20M272215- M20M272224-....28 M20M272215L M20M272224L...28 M20W272215- M20W272224-...26 M20W272215L M20W272224L...26 M20W332215- M20W332224-...27 M20W332215L M20W332224L...27 M25M272215- M25M272224-....28 M25M272215L M25M272224L...28 M25M332215- M25W332224-...29 M25M332215L M25W332224L...29 M25W272215- M25W272224-...26 M25W272215L M25W272224L...26 M25W332215- M25W332224-...27 M25W332215L M25W332224L...27 M30M272215- M30M272224-....28 M30W272215- M30W272224-...26 M35M272215- M35M272224-....28 M35W272215- M35W272224-...26 M36M272215- M36M272224-....28 M40M332215- M40W332224-...29 M40W272215- M40W272224-...26 M45M272215- M45M272224-....28 M45M332215- M45W332224-...29 M45W332215- M45W332224-...27 M46M332215- M46W332224-...29 M50W332215- M50W332224-...27 M60W272215- M60W272224-...26 M62M272215- M62M272224-....28 M62W272215- M62W272224-...26 M62W332215- M62W332224-...27 M63W332215- M63W332224-...27 M65W272215- M65W272224-...26 M67M272215- M67M272224-....28 M67M332215- M67W332224-...29 M67W332215- M67W332224-...27 M71M332215- M71W332224-...29 M75W332215- M75W332224-...27 SC10M022424-00 SC10M022448-00 40 W-0242-0A W-0242-00...6 W-0243-0A W-0243-00...6 W-0602-0A W-0603-00...10 W10M301330- W10M301648-...36 W10W301330- W10W301648-...36 W-1133-36 W-1133-72. 7-11-41 W-1233-36 W-1233-72. 7-11-41 W12M301330- W12M301648-...37 W12W301330- W12W301648-...37 W-1533-72... 7-11-41 W20M301318- W20M301624-...37 W20M301318L W20M301624L...37 W20M301330- W20M301648-...37 W20W301318- W20W301624-...37 W20W301318L W20W301624L...37 W20W301330- W20W301648-...37 W-2321-40 W-2321-48...6 W-2421-40 W-2421-48...6 W-5621-36 W-5624-72. 7-11-41 W-6132-20 W-6132-84...10 W-6232-20 W-6232-84...10 W-8111-K1 W-8111-K8. 7-11-41 W-9112-K1 W-9112-K8...7-11 W-9122-K1 W-9122-K8...41 EW-04/12r1-51

EW-04/12r1-52

2024 © hobbydocbox.com Privacy Policy | Terms of Service | Feedback