AnoGotcha - Ball Chain 800.753.9688 www.novadisplay.com Ball Chain 96-0302P Cable Clip 06-5050 Insert single ball of the ball chain into inner channel of Cable Clip. The cable should snap into place. Fig. 2 Align one round end of cable clip with top channel of the aluminum rail and insert. Once in place, insert end of ball chain into channel. Then press down on the other round end of the cable clip and slide into rail by pushing on the clip. Fig. 3 Note: Be sure to slide the ball chain into place by pushing on the cable clip. Do not pull on, or push against, the ball chain as this will cause it to bind in the channel. Snap the AnoGotcha Holder open and insert poster (top and bottom). To close, snap the AnoGotcha Holder shut. Fig. 5
AnoGotcha - Loop & Saucer 800.753.9688 www.novadisplay.com Loop & Saucer 16-0018SL Cable Clip 06-5050 Place cable onto inner channel of Cable Clip. The cable should snap into place. Fig. 2 Align one round end of cable clip with top channel of the aluminum rail and insert. Once in place, insert end of ball chain into channel. Then press down on the other round end of the cable clip and slide into rail by pushing on the clip. Fig. 3 Note: Be sure to slide the ball chain into place by pushing on the cable clip. Do not pull on, or push against, the ball chain as this will cause it to bind in the channel. Snap the AnoGotcha Holder open and insert poster (top and bottom). To close, snap the AnoGotcha Holder shut. Fig. 5
AnoGotcha - Loop & Saucer 800.753.9688 www.novadisplay.com Cable & Saucer 16-0018SS Cable Clip 06-5050 Place cable onto inner channel of Cable Clip. The cable should snap into place. Fig. 2 Align one round end of cable clip with top channel of the aluminum rail and insert. Once in place, insert end of ball chain into channel. Then press down on the other round end of the cable clip and slide into rail by pushing on the clip. Fig. 3 Note: Be sure to slide the ball chain into place by pushing on the cable clip. Do not pull on, or push against, the ball chain as this will cause it to bind in the channel. Snap the AnoGotcha Holder open and insert poster (top and bottom). To close, snap the AnoGotcha Holder shut. Fig. 5
AnoGotcha - Loop & Saucer 800.753.9688 www.novadisplay.com MultiClips 1UP-0101 Squeeze sides of MultiClip together. Fig. 2 Align the bottom rail of the MultiClip with the top channel of the aluminum holder. Slide MultiClip into rail. Fig. 3 Repeats teps 2 and 3 for second MultiClip. AnoGotcha Holder shut. Fig. 5
AnoGotcha - Window Mount 800.753.9688 www.novadisplay.com Round or Square Window Mounts Slide Window Mounts into the top channel of the. Fig. 2 Push end caps into place. Fig. 3 AnoGotcha Holder shut. Fig. 4 Hang poster accordingly. Figure 3 Figure 4
AnoGotcha - Slat Wall Hanger 800.753.9688 www.novadisplay.com Slatwall Hangers 06-6068 Push end caps into place. Fig. 2 AnoGotcha Holder shut. Fig. 3 Figure 3 Insert hangers into upper portion of slatwall. Hangers will rest on lower portion of slatwall. Fig. 4 Note: To ensure that the frame hangs level use two hangers placed an equal distance in from each side of the frame. Figure 4 Place the AnoGotcha on the hangers using the bottom channel of the top rail. Fig. 5 Figure 5
AnoGotcha - Wall Hanger 800.753.9688 www.novadisplay.com Round or Square Frame Wall Mounting Hangers 2 Nails and 2 Wood Screws or Molly Anchors Push end caps into place. Fig. 2 AnoGotcha Holder shut. Fig. 3 Install wall mounting hangers using either nails or screw. Hammer nails into wall or use a Phillips head screwdriver for screws. Fig. 4 Figure 3 Note: The use of Molly Anchors are recommended for drywall installations. (predrilling 3/16 holes is necessary). Hang poster accordingly. Figure 4