Special features Potentiometric measuring principle with conductive plastic resistance track and integrated signal amplifier Redundant design for safety relevant applications available Extremely rugged construction with stainless steel shaft and housing out of sea-water proof aluminum Long lifetime High resolution combined with good linearity vailable in various versions (see ordering specifications). Customized versions on request Electrical data Function angle single/redundant (see ordering specification) 45 ±.5 334 ±.5 Linear measuring range (symmetric to electrical center) ±6 ±6 Current consumption 2 m (without external loads) bsolute linearity related to 36 ±.4 % ±.7 % Micro linearity ±. % Signal deviation output to B (for redundant versions) ±2 % Electrical data of output Output (see ordering specifications) 5 V 4 2 m Supply voltage (nominal +24 VDC) + +3VDC +9 +3VDC Output current 2 m - Output voltage mv - Working resistance - 3 Ω Center output 2,5 V 2 m Output signal gradient at 7 function angle 5 V / 7 6 m / 7 Output signal gradient at 45 function angle 5 V / 45 6 m / 45 Output signal gradient at 334 function angle 5 V / 334 6 m / 334 Environmental properties Protection class (ISO 2653) housing/cable inlet IP6K6K / IP6K8 (m;2h) / IP6K9K with factory-mounted cable Protection class (ISO 2653) shaft inlet IP6K7 Operating and storage temperature range -4 C to +85 C Oscillation resistance 5... 2 Hz, MX =,75 mm, a MX = 2 g Bump resistance 5 g / ms D537de-kurz page /
Mechanical data Shaft diameter Maximum axial load Maximum radial load Maximum torque Lifetime Jittering test (2 amplitude around center, Hz) Mechanical function angle Corrosion protection Shaft: Housing: Electrical connection for flexible laying (see ordering specifications, detailed data on request) 2 mm 7 N 25 N 5 Nm 5 x 6 movements inside function angle 5 x 6 cycles 36 continuous (< times) Stainless steel nodized sea-water proof aluminum alloy. Highly flexible, shielded PUR special cable, minimum bending radius mm, temperature range -3 C... +8 C, weather-proof and UV-proof D537de-kurz page 2/2
Ordering Specifications 53 7 - - Resistance track (measurement range) single 45 single 334 redundant 45 2 6 Mechanical configuration (housing) standard (luminum) Connector Cable length Cable type without connector without cable without (screwed connection M6x,5) 7-pole DIN72585 2,m 6 x,5 IP6K7 / IP6K9K flexible use C 2 B 4-pole M2x flange plug without without IP6K8 (m;2h) not for redundant implementations J Customized versions standard X Supply / Output 24 VDC /... 5 V 24 VDC /... V 24 VDC / 4 2 m 2 Definition of rotational direction standard / direction of rotation right standard / direction of rotation left Levers specification: type: without - 55 mm / 7 x M8 44 34 We will gladly develop customized angle transducer (e.g. stainless steel housing, other cable length, special levers, output signal). D537de-kurz page 3/3
Dimensional drawings Connector DIN 72585 pin signal name cannel : supply V 2 cannel : signal output 3 cannel : supply 24 V 4 cannel B: supply V 5 cannel B: signal output 6 cannel B: supply 24 V 7 screen Connector M2 flange plug pin signal name +Ub (24V) 2 n.c. 3 GND (V) 4 OUT Levers (preferences, see ordering specification) D537de-kurz page 4/4
Equivalent circuit diagram (redundant version) Version k) - Technical changes due to further technical development reserved. D537de-kurz page 5/5