SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function, W/W) aluminium body, /4 - /2 4 4 2 2 4 4 2 4 4 2 2 4 4 2 2 2 /2 / Series - FTURS The monostable spool valves in conformity with I 60 Standard (200 route 2 H version) have TÜV ( series) and XID (- series) certified with integrity levels: SIL 2 for HFT = 0 / SIL for HFT = The spool valves /2 and / have threaded port connections ll the exhaust ports of the spool valve are connectable, providing better environmental protection. Particularly recommended for sensitive areas, such as clean rooms, and applications in the pharmaceutical and food processing sectors The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter (environmentally-protected construction) an be externally piloted (external air pilot supply) to convert valve to zero minimum operation by flipping a gasket The solenoid valves satisfy all relevant U directives GNRL Differential pressure Flow (Qv at 6 bar) 2-0,4 bar [ bar =00 kpa] /4 = 60 l/min (/2) ; 760l/min (/) (NR) /2 = 00 l/min (/2, /) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered -2 to +60 NR (nitrile) + PUR (polyurethane) MTRILS IN ONTT WITH FLUID ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodised nd cover (spring return) Glass-filled P Spool valve internal parts Zamak, stainless steel, POM, aluminium Pilot internal parts Refer to specific solenoid catalogue pages Pilot end covers luminium ore tube Stainless steel ore and plugnut Stainless steel ore spring Stainless steel Seals NR Top disc P Disc holder POM artridge (low ) Welded, stainless steel or aluminium Seat rass Seat insert POM Shading coil opper Rider rings (low ) PTF (NF/WSNF solenoids only) UP Not available /2 function, monostable LP 0,W - 2W 4 2 / function RP - MP P Not available 0,W -,2W Ultra Low Low Reduced and Medium asic SPIFITIONS pipe orifice flow coefficient Kv operating pressure differential (bar) prefix optional solenoids max. (PS) level NM TX / Ix min. POWR LVLS - cold electrical holding values (watt) basic catalogue number IP6 air ( ) 7 & x db x eb mb x mb x ia - ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF M PV LI WSLI - S /2 - Solenoid air pilot operated - spring return (monostable) /4 6 0,7 2, 0 / 2 0 0 P - - - - - 47 /4 6 0,7 2, 0 / 2 0 0 P - - - - - - - - H47 /4 6 0,7 2, 0 / 2 0 0 LP - m m m - 7 /4 6 0,7 2, 0 / 2 0 0 LP m - - - - - - - - H7 /2, 2, 0 / 2 0 0 P - - - - - 47 /2, 2, 0 / 2 0 0 P - - - - - - - - G47 /2, 2, 0 / 2 0 0 LP - m m m - 7 /2, 2, 0 / 2 0 0 LP m - - - - - - - - G7 Select for NPT NSI.20. or select G for ISO G (22/) vailable feature vailable feature in D only. - Not available () ertified I 60 Functional Safety data, use suffix "SL". Zero minimum is only achieved if external pressure is applied. ll leaflets are available on: www.asco.com Process Industry - 7 00G-20/R0
SPIFITIONS pipe orifice flow coefficient Kv operating pressure differential (bar) prefix optional solenoids max. (PS) level NM TX / Ix min. SRIS - basic catalogue number IP6 air ( ) 7 & x db x eb mb x mb x ia - ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF - M PV WS(LI) - S /2 - Solenoid air pilot operated and return (bistable) /4 6 0,7 2, 0/2 0 0 P - - - - - 4 /4 6 0,7 2, 0/2 0 0 P - - - - - - - - H4 /4 6 0,7 2, 0/2 0 0 LP - - m m - /4 6 0,7 2, 0/2 0 0 LP m - - - - - - - - H /2, 2, 0/2 0 0 P - - - - - 4 /2, 2, 0/2 0 0 P - - - - - - - - G4 /2, 2, 0/2 0 0 LP - - m m - /2, 2, 0/2 0 0 LP m - - - - - - - - G / - W - pressure held, solenoid air pilot operated and return /4 6 0,7 0/2 0 0 P - - - - - 467 /4 6 0,7 0/2 0 0 P - - - - - - - - H467 /4 6 0,7 0/2 0 0 LP - - m m - 67 /4 6 0,7 0/2 0 0 LP m - - - - - - - - H67 /2, 2, 0/2 0 0 P - - - - - 467 /2, 2, 0/2 0 0 P - - - - - - - - G467 /2, 2, 0/2 0 0 LP - - m m - 67 /2, 2, 0/2 0 0 LP m - - - - - - - - G67 / - W - pressure release, solenoid air pilot operated and return /4 6 0,7 0/2 0 0 P - - - - - 46 /4 6 0,7 0/2 0 0 P - - - - - - - - H46 /4 6 0,7 0/2 0 0 LP - - m m - 6 /4 6 0,7 0/2 0 0 LP m - - - - - - - - H6 /2, 2, 0/2 0 0 P - - - - - 46 /2, 2, 0/2 0 0 P - - - - - - - - G46 /2, 2, 0/2 0 0 LP - - m m - 6 /2, 2, 0/2 0 0 LP m - - - - - - - - G6 Select for NPT NSI.20. or select G for ISO G (22/) vailable feature vailable feature in D only. Zero minimum is only achieved if external pressure is applied. - Not available ll leaflets are available on: www.asco.com - Process Industry 00G-20/R0
SRIS - PRFIX TL prefix level description 2 4 6 7 LP RP MP P F xplosionproof - NM 7, - Zinc plated steel conduit m - - M Waterproof IP66/67 - Metal enclosure (N/I 6007-7,- and -)* - - T Threaded conduit/hole (M20 x,) - - L P K F Flameproof - luminium (N/I 6007-, 6007-)* - - - N F Flameproof - luminium (N/I 6007-, 6007-)* - - P V ncapsulated epoxy moulded (N/I 6007-)* m - - S Solenoid with spade plug connector (N/I 6070) - - W P Waterproof IP67 - Metal enclosure - - L I I.S. with luminium IP66/IP67 enclosure (N/I 6007-+)* m - - - W S Waterproof IP67-6 SS enclosure - - W S L P K F Flameproof 6L SS (N/I 6007-, 6007-)* - - - W S M Waterproof IP66/67-6 SS enclosure (N/I 6007-0+7++)* - - W S L I I.S. with 6L SS IP66/IP67 enclosure (N/I 6007-+)* m - - - W S N F Flameproof 6L SS (N/I 6007-, 6007-)* - - T Threaded conduit (/2" NPT) - - H T lass H - High temperature, +0 ambient temp. - - - X Other special constructions - - SUFFIX TL suffix level description 2 4 6 7 LP RP MP P M O Push type manual operator / - - S L ertified I 60 Functional Safety data () / - - M F Low temperature -40 / - - PRODUT SLTION GUID STP Select basic catalogue number, including pipe thread indentification letter. Refer to the specifications table on page: 7 or xample: G47 STP 2 Select prefix (combination). Refer to the specifications table and the prefix table, respect the indicated level. xample: M STP Select suffix (combination) if required. Refer to the suffix table, respect the indicated level. xample: MO STP 4 Select voltage. Refer to standard voltages on page: 0 xample: 20V / 0Hz STP Final catalogue / ordering number. xample: M G47MO 20 V / 0 Hz OPTIONS & SSORIS series pipe exhaust protector (stainless steel) G NPT (M) / / 46004 460042 - /4 46004 46004 - /2 460047 46004 - M - - 460044 vailable feature vailable feature in D only - Not available * TX/Ix valves using these solenoids are approved according to N 46- (non electrical) () Not to use with MO suffix Provided with "SL" suffix ORDRING XMPLS VLVS: S G 47 20V / 0 Hz S G 47 SL 20V / 0 Hz S G 4 MO 20V / 0 Hz SHT 4 MO 20V / 0 Hz LPKF G 7 MO 24V / D LPKF G 7 MO 20V / 0 Hz WSLPKF G 7 MO 24V / D LI G 7 24V / D M 4 MO 20V / 0 Hz F G H 47 MO 240V / 60 Hz prefix () pipe thread basic number () voltage suffix () Prefixes F should always be used with the letter H or G in the basic number. ll leaflets are available on: www.asco.com Process Industry - 00G-20/R0
SRIS - XPLNTION OF TMPRTUR RNGS OF SOLNOID VLVS Valve temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature range The operator ambient temperature range is determined by the selected level and the safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I Standard voltages D (=) 24V - 4V (~) 24V - 4V - V - 20V () /0Hz; other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil / kit prefix inrush holding hot/cold temperature enclosure safety code type option ~ ~ = range (TS) protection ~ = (V) (V) (W) (W) ( ) () (N 602) 20 V/0 Hz 24V/D asic (P) S 2 0, /,2-40 to +7 N 6070 IP6, moulded 40042-7 40042-42 0 WP/WS 2 0, /,2-40 to +7 N 6070 IP67, steel /SS 40040-7 40040-42 04 NF/WSNF 2 0, - -60 to +2/40/60 II2G x db II Gb T6/T/T4, II2D x tb III Db IP66/67, alu./ss 40040-7 - 02 NF/WSNF - - - /,2-60 to +40/60/7 II2G x db II Gb T6/T/T4, II2D x tb III Db IP66/67, alu./ss - 40040-42 02 M/WSM 2 0, /,2-40 to +40 II2G x eb mb II Gb T, II2D x tb III Db IP66/67, steel /SS 4000-7 400-42 04 PV 2 0, /,2-40 to +6 II2G x mb II Gb T(~)/T4(=), II2D x mb III Db IP67, moulded - (4) - (4) 0 F 2 0, /,2-40 to +2/40 NM type 7 and NM 4X 264-0 274-006 06 Low Power (LP) S,,,,7/,7-40 to +60 N 6070 IP6, moulded 4002-07 4002-042 07 WP/WS,,,,7/,7-40 to +60 N 6070 IP67, steel /SS 40026-07 40026-042 0 LPKF/WSLPKF (7) 2,4 2,4 2,4 () - -40 to +40/6/0 II2G x db II+H2 Gb T6/T/T4, II2D x tb III Db IP66/67, alu./ss - (4) - (4) LPKF/WSLPKF - - - 0,/0, (7) -40 to +60 II2G x db II+H2 Gb T6, II2D x tb III Db IP66/67, alu./ss - (4) - (4) LPKF/WSLPKF - - - 2, () -40 to +40/0 II2G x db II+H2 Gb T6/T4, II2D x tb III Db IP66/67, alu./ss - (4) - (4) NF/WSNF,,,,/, -60 to +7/0 II2G x db II Gb T6/T, II2D x tb III Db IP66/67, alu./ss - (4) () - (4) 0 M/WSM,,,,7/,7-40 to +40/ II2G x eb mb II Gb T6/T, II2D x tb III Db IP66/67, steel /SS - (4) - (4) 0 PV - - -,7/,7-40 to +6 II2G x mb II Gb T6, II2D x mb III Db IP67, moulded - - (4) 0 F - - -,7/,7-40 to +60 NM type 7 and NM 4X - - (4) LI () (6) - - - 0,/0, -40 to +60 IIG x ia II T6 Ga, II2D x tb III Db (6) IP66/67, alu. - - (4) 4 WSLI () (6) - - - 0,/0, -40 to +60 IIG x ia II T6 Ga, II2D x tb III Db (6) IP66/67, SS - - (4) 4 prefix option safety parameters U I = (D) I I P I L I I (V) (m) (W) (H) (µf) Low Power (LP) LI/WSLI 2 00, 0 0 () Temperature range can be limited by sealings Refer to the dimensional drawings on pages: 4 to 7 () LI/WSLI: heck the electrical characteristics in the corresponding catalogue pages (4) Multiple coil kits are available under TX/Ix, contact us () Only available in 24, 4 and 0V/D (6) LI/WSLI: Low Power, 24 V D only (LI: For use in zone 0 locations, see the installation conditions given in the I&M instructions) (7) LPKF/WSLPKF: 24 V D, max. ambient temp. +0, contact us (4 V D = 2, W) () Max. ratings values: V (2,4 W), 4 V D (2, W) - Not available LTRIL ONNTIONS prefix connection S Spade plug connector with cable gland N70-0 (ISO 4400) for cables with an outer diameter from 6 to 0 mm WP, WS, M, WSM M20 plastics cable gland for cables with an outer diameter from 7 to 2 mm. NF, WSNF, LPKF, WSLPKF /2" NPT threaded cable entry. nclosures are supplied without cable gland PV Moulded-in cable, standard length 2 m LI, WSLI /2" NPT threaded cable entry. nclosures are supplied without cable gland F /2" NPT conduits, standard length cm ll leaflets are available on: www.asco.com 0 - Process Industry 00G-20/R0
SRIS - DDITIONL OPTIONS Valves configured for external pilot air supply, TPL 2047 Other pipe threads are available on request x mb/md (prefix "PV") solenoid can be supplied with various cable lengths ompliance with "UL", "S" and other local approvals available on request INSTLLTION Multi language installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation Do not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions I 60 Functional Safety (suffix SL). heck temperature range of valve body and solenoid for suitability. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is = NPT (NSI.20.); G = G (ISO 22/) x db Prefix "NF/WSNF" enclosure is provided with a /2" NPT threaded entry hole, M20 x, (prefix "T") is optional. These are supplied without cable gland DIMNSIONS (mm), WIGHT (kg) Series Series 4, / 6, 4 2 2 = 22 = 4 2 x /4 27, 2 4 44 / 6, 4,6 4 2 x /2 40,2 4 4,,6, 2, 7, 22 72, 2 mounting holes:, mm dia.; Spotfacing: mm dia., depth mm 2 mounting holes: 6, mm dia.; Spotfacing: mm dia., depth 6 mm ll leaflets are available on: www.asco.com Process Industry - 00G-20/R0
SRIS - DIMNSIONS (mm), WIGHT (kg) TYP 0: poxy moulded S: I / ISO 4400 TYP 02: luminium, epoxy coated / ISI 6L SS NF / WSNF: N/I 6007-, 6007-47/4/47MO/4MO/467/46/467MO/46MO 47/4/47MO/4MO/467/46/467MO/46MO 47/4/47MO/4MO/467/46/467MO/46MO 47/4/47MO/4MO/467/46/467MO/46MO 6 G / 60 0 60 /2 NPT 2 D 4 4 02 6 TYP 04: Metal, epoxy coated / ISI 6L SS WP / WS: I M / WSM: N/I 6007-7++ 47/4/47MO/4MO/467/46/467MO/46MO 47/4/47MO/4MO/467/46/467MO/46MO / NPT 4 60 2 20 TYP 0: poxy encapsulated PV: N/I 6007- TYP 06: poxy encapsulated F: NM type 7, / IS-6 NSI 47/4/47MO/4MO/467/46/467MO/46MO 47/4/47MO/4MO/467/46/467MO/46MO H47/H4/H47MO/H4MO/H467/H46/H467MO/H46MO G47/G4/G47MO/G4MO/G467/G46/G467MO/G46MO / / 60 60 ll leaflets are available on: www.asco.com D 46 D 2 00G-20/R0 2 - Process Industry
SRIS - DIMNSIONS (mm), WIGHT (kg) TYP 07: poxy moulded S: I / ISO 4400 TYP 0: luminium, epoxy coated / ISI 6L SS NF / WSNF: N/I 6007-, 6007-7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO 6 / NPT 60 0 60 /2 NPT 2 D 4 4 02 6 TYP 0: Metal, epoxy coated / ISI 6L SS WP / WS: I M / WSM: N/I 6007-7++ TYP 0: poxy encapsulated PV: N/I 6007-7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO / NPT 4 / NPT 60 60 2 20 D 46 TYP : poxy encapsulated F: NM type 7, / IS-6 NSI 7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO / 60 D 2 ll leaflets are available on: www.asco.com 00G-20/R0 Process Industry -
SRIS - DIMNSIONS (mm), WIGHT (kg) TYP : luminium, cataphorese black painting / ISI 6L SS LPKF/WSLPKF: N/I 6007-, 6007- TYP 4: luminium, cataphorese black painting / ISI 6L SS LI / WSLI: N/I 6007-, 6007-7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO 7//7MO/MO/67/6/67MO/6MO / NPT 2 / NPT /2NPT 4 /2 NPT 60 60 6 0 6 0 2 x d certified cable gland (on request) Three-core cable, length 2 m 4 able gland for unarmoured cable with 7 to 2 mm dia. sheath 6 onnector rotatable by 0 increments, cable Ø 6-0 mm Manual operator location, suffix MO xternal pilot air supply, / pipe onnectable pilot exhaust port Non-connectable pilot exhaust port type prefix/option level weight () D monostable bistable 0 S P 44 7, 2 22 02,7 2,2 22, 6, 6, 00,2 0,7,0,7 2,06 02 NF / WSNF P 70 224, 26 4,6 4,, - - - -, 2,4,4 4,20 04 WP / WS P 60 6,2 26 2, 0 2, - - - - 0,7,,2 2,0 04 (WS)M P 60 6,2 26 2, 0 2, - - - - 0,7,,2 2,0 0 PV P 44 7, 4 22 7, 22, 6, 67,,2 0,,,4 2,07 06 F P 44, 22, 22, 6, 74,,2 0,67,,2 2,0 07 S LP 44, 0, 227 0, 22, 6, 7, 0,2,00,7, 2,27 0 NF / WSNF LP 70 224, 26 4,6 4,, - - - -, 2,4,4 4,20 0 WP/WS/(WS)M LP 60 6,2 26 2, 02,2,7 - - - -,0,72,7 2,2 0 PV LP 44 7, 4 22 00, 0 22, 6, 67,,2,06,72,6 2,2 F LP 44, 22 00, 0 22, 6, 74,,2 0,,72, 2,2 LPKF LP, 204 24 22, - - - - 0,,,6 2,6 WSLPKF LP, 204 24 22, - - - -,4 2,2 2,,4 4 LI LP, 204 24 22, - - - - 0,4,2,66 2,7 4 WSLI LP, 204 24 22, - - - -, 2, 2,6,7 () Incl. coil(s) and connector(s). SSORIS ø4 ø4 / NPT 20 pilot exhaust protector part number 27640-00 Ø / NPT /4 NPT ll leaflets are available on: www.asco.com pilot top exhaust low (SO solenoid interface) Ø Ø M / /4 / /2 4, 0 4 exhaust protector (stainless steel) PI-0-000-G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 00G-20/R0 4 - Process Industry