Chucks.

Chucks xminster Chucks xminster has been producing 4-jaw chucks for woodturning lathes since 984. The English company offers a suitable chuck size for every application, not to mention excellent value for money. The chucks along with all accessories are made in England on CNC machines and have been developed over years working closely with experienced turners. a xminster Woodturning Chuck Evolution SK4 This chuck features a super-slim stainless steel body incorporating a new design of longer accessory mounting jaws. Max. jaw movement 22 mm (plus safety capacity). Fully compatible with all xminster jaws. Includes chuck key for one-handed operation. ExtEnDED key FoR axminster WooDtURnInG CHUCk this extended hook wrench allows quick and easy handling of large-diameter items. Fits axminster Woodturning Chuck Evolution Sk4. Square 9 x 9 mm. Size 240 mm No. 702278 These jaws sit deeper in the chuck and offer a greater contact area within the slide ways of the chuck, thus minimising vibration during use. Indexing is achieved by 24 peripheral slots and 36 holes on the chuck back plate, giving the option of 0 or 5 indexing. c xminster Woodturning Chuck, Evolution SK4 SOLO Model M33 x DIN 800 Ø 4 mm No. 702238 Evolution Standard The ultra-compact design keeps the workpiece as close as possible to the headstock of your lathe to lessen the load on the bearings and prevent unwanted vibration. C UnIVERSaL JaWS FoR axminster EVoLUtIon Jaws with formed ridge for attaching axminster accessories. axminster chucks come with jaws, but a separate set of universal jaws makes swapping accessory jaws much quicker. the accessory jaws do not have to be detached from the jaws each time you change the workpiece. Set consisting of four jaws. Fits woodturning chuck Evolution Sk4, no. 702238. No. 702273 D xminster Clubman Woodturning Chuck Excellent value for money: Equipped with universal accessory mounting jaws, this chuck fits a wide range of xminster accessories and jaws. The self-centering 4-jaw chuck is highly robust and versatile. Its extreme stability is supported by large threads in the scroll and jaws. The chuck body is made completely of stainless steel, which allows closer manufacturing tolerances. This ensures better concentricity and minimises vibrations. The max. jaw movement is 25 mm (plus safety capacity). Includes chuck key for onehanded operation. For safety, the maximum jaw movement is limited so that when the chuck is fully opened, the threads of the scroll engage still sufficiently in the jaws. D E e Extended Key for xminster Woodturning Chuck The extended key allows quick and easy handling of large-diameter items. Fits xminster Woodturning Chuck Clubman SK00 und SK80. Size 75 mm No. 702277 2 3 xminster Woodturning Chuck Clubman SK80, with Type C80 Jaws Modell x 8 tpi 40-65 mm 50-75 mm Ø 80 mm Weight.3 kg (solo) No. 702274 2 xminster Woodturning Chuck Clubman SK00, Solo Model M33 x DIN 800 Ø 00 mm Weight.6 kg (solo) No. 70224 G 3 xminster Woodturning Chuck Clubman SK00, with Type C Jaws Model M33 x DIN 800 56-8 mm 69-94 mm Ø 00 mm Weight.6 kg (solo) No. 702240 F F UnIVERSaL JaWS FoR axminster CLUMan Sk00 and GoLIatH Jaws with formed ridge for attaching axminster accessories. axminster chucks come with jaws, but a separate set of universal jaws makes swapping accessory jaws much quicker. the accessory jaws do not have to be detached from the jaws each time you change the workpiece. Set consisting of four jaws. Fits chuck types Clubman Sk00. No. 702272 G Chuck Removal Spanner For detaching the woodturning chuck from the spindle thread. Fits woodturning chucks Clubman SK00 / SK80. No. 702264 25

xminster Jaws for Clubman SK80 a xminster Expanding Dovetail Chuck Jaws, Type D80 The dovetailed outsides provide a secure grip e.g. on recessed small bowls or cases. The smooth jaw surface does not leave any marks on highly sensitive materials. b xminster Gripper Jaws, Type H80 The serrated insides and outsides of the jaws hold workpieces by clamping or expanding on the inside of the workpiece. Chuck Clubman SK80 No. 702275 chuck. Clubman SK80 33-76 mm 48-90 mm No. 702276 xminster Jaws for Evolution and Clubman SK00 lso fits Goliath and previous models. C C xminster Dovetail Jaws, Large Gentle clamping with non-serrated dovetail jaws. Round workpieces can be clamped particularly gently because of the smooth jaw surface. The dovetail shape is ideal for clamping at bowl recesses as well as screw chucks and faceplate rings. Suitable for mediumweight workpieces. For safety, the maximum jaw movement is limited so that when the chuck is fully opened, the threads of the scroll engage still sufficiently in the jaws. 2 3 Type Goliath 25/60-7/06 mm 00-46 mm 2 Type Goliath 25-7 mm 62-08 mm Clubman SK00 25/60-50/85 mm 00-25 mm Clubman SK00 25-50 mm 62-87 mm Evolution 25/60-47/82 mm 00-22 mm Evolution 25-47 mm 62-84 mm No. 702244 No. 702245 3 Type M Goliath 00-46 mm 25-7 mm Clubman SK00 00-25 mm 25-50 mm Evolution 00-22 mm 25-47 mm No. 702252 D D xminster Dovetail Jaws, small Non-serrated jaw type for gentle clamping. The smooth jaw surface does not leave any marks on highly sensitive materials. Holds workpieces both by clamping the outside or expanding on the inside of the workpiece. The insides are suitable for all standard clamping situations, while the dovetailed outsides provide a secure grip, e.g. on recessed bowls. E E xminster Dovetail Jaws, Type C One of the most versatile and popular jaw sets. Gentle clamping with nonserrated dovetail jaws. Round workpieces can be clamped particularly gently because of the smooth jaw surface. The insides of the jaws are ideal for clamping screw chucks and faceplate rings. Suitable for medium-weight workpieces. 2 Type D Goliath 2-58 mm 25-7 mm Clubman SK00 2-37 mm 25-50 mm Evolution 2-34 mm 25-47 mm No. 702247 2 Type F Goliath 9-65 mm 38-84 mm Clubman SK00 9-44 mm 38-63 mm Evolution 9-4 mm 38-60 mm No. 702248 Goliath 56-02 mm 69-5 mm Clubman SK00 56-8 mm 69-94 mm Evolution 56-78 mm 69-9 mm No. 702246 F f xminster Combination Jaws, Type Colossus The large jaws hold large workpieces, either by clamping the outside or expanding on the inside of the workpiece. The serrated grip on the inside is suitable for all standard clamping situations, and the dovetailed outsides ensure a secure grip, e.g. when clamping bowl feet. G G xminster Gripper Jaws Spigot jaws for small and medium sized workpieces. The serrated insides and outsides of the jaws hold workpieces by clamping or expanding on the inside of the workpiece. 2 2 2 Type Colossus Goliath 25-7 mm 50-96 mm Clubman SK00 25-50 mm 50-75 mm Evolution 25-47 mm 50-72 mm No. 702253 ww.dictum.com ############################ 26 2 Type G Goliath 84-30 mm 04-50 mm Clubman SK00 84-09 mm 04-29 mm Evolution 84-06 mm 04-26 mm No. 702249 For advice and Type F Goliath 20-66 mm 36-82 mm Clubman SK00 20-45 mm 36-6 mm Evolution 20-42 mm 36-58 mm No. 70225 2 Type H Goliath 25/56-7/02 mm 75-2 mm Clubman SK00 25/56-50/8 mm 75-00 mm Evolution 25/56-47/78 mm 75-97 mm No. 702250

a xminster Long Cylinder Jaws These special 50 mm long jaws are ideal for long and thin workpieces such as boxes, cups and vases. The jaws hold the workpiece securely and accurately along the full length of the spigots in the direction of the axis. The dovetails also allow you to clamp shorter workpieces at their recesses, e.g. bowls. b xminster Spigot Jaws These spigots are ideal for slim workpieces such as pepper mills and small boxes. They hold blanks securely and reliably in a hole of just 30 mm in diameter. 2 Ø 25 Goliath 25-7 mm 60-06 mm Clubman SK00 25-50 mm 60-85 mm Evolution 25-47 mm 60-82 mm No. 702254 2 Ø 50 Goliath 50-96 mm 65- mm Clubman SK00 50-75 mm 65-90 mm Evolution 50-72 mm 65-87 mm No. 702255 For safety, the maximum jaw movement is limited so that when the chuck is fully opened, the threads of the scroll engage still sufficiently in the jaws. Model Spigot Jaws Chuck Goliath Clubman SK00 Evolution No. 702256 chuck. 28-74 mm 28-53 mm 28-50 mm C c xminster Faceplate This solid steel faceplate is used for mounting open-worked workpieces or those with a larger diameter or irregular shape. Model M33 x DIN 800 Ø 75 mm steel faceplate with one ring of timber-mounting holes No. 70226 Ø 00 mm steel faceplate with two rings of timber-mounting holes No. 702262 Ø 50 mm steel faceplate with three rings of timber-mounting holes No. 702263 D E d xminster utton Jaws with 8 rubber buttons The eight flexible sliding rubber buttons allow you to clamp irregular-shaped workpieces securely without damaging the edges of the workpiece. Suitable for turning bowls, even without a recess. To allow larger segments, the jaws are made of aluminium, which minimises centrifugal forces compared with steel segments. The clamping force of the clamping buttons is limited by the design. e xminster Wood Jaw Plates Four steel segments that hold customdesigned wooden jaws. Fits xminster 4-jaw chucks with universal jaws: Clubman SK80 / SK00, Evolution SK4 and Goliath. Size Ø 00 mm No. 702257 Size Ø 50 mm No. 702258 Size Ø 250 mm Clubman SK80 66-28 mm 3-266 mm Clubman SK00 70-220 mm 3-266 mm Evolution No. 702259 66-28 mm 3-266 mm Size Ø 400 mm (not suited for SK80) Clubman SK00 78-345 mm 22-385 mm Evolution 8-388 mm 24-435 mm No. 702260 27

Oneway Chucks ll chucks of the trademark Oneway are produced in Canada to guarantee high quality and accuracy. For both chucks Talon and Stronghold many accessories are available, from which you can choose according to your needs. The bodys are manufactured in one continuous operation in order to guarantee the highest-possible true running-accuracy. Oneway Chuck, Talon The Oneway Talon chuck is a self centering 4 jaw chuck. Suitable for almost all turning needs, it is the standard chuck for the turner. Recommended for woodturning lathes with a swing up to 200 mm. The set contains a taper lock adapter, premium profiled jaws size 2, chuck key, woodworm screw, hex key. Different taper lock adapter are available upon request. Jaws size 2: external 36 7 mm 5 86 mm. Model M33 x 3.5 DIN 800 Ø 85 mm No. 70259 Modell inch x 8 tpi Ø 85 mm No. 70260 It is easy to handle single-handed with the help of the included chuck key. This way you can use your other hand to position the workpiece. The body, manufactured out of one piece, is low vibrating and rotates accurately. nickel coating protects the chuck from rust. The case hardened jaw slides, made from chrome-nickelsteel, are extremely wearresistant and run smoothly and exactly in the toothed guiding. b Oneway Chuck, Stronghold The advantage of this self centering 4 jaw chuck lies in its heavy design. Suitable for large objects, this chuck offers security in almost all clamping situations. Recommended for woodturning lathes with a swing from 200 mm on. the set contains a taper lock adapter, premium profiled jaws size 2, chuck key, woodworm screw, hex key. Different taper lock adapter are available upon request. Jaws size 2: external 44 82 mm 60 0 mm. Model M33 x DIn 800 Ø 05 mm No. 70258 Other adapter needed? - No problem! We have a whole series of special adapter on request. 28

How to find the appropriate Oneway adapter for your lathe Why you should always measure the thread of your spindles There are many lathes on the market and they all have different thread sizes on the main spindle. To obtain the appropriate accessories (e.g. faceplates, woodturning chucks or adapters), it is vital to know the thread size of the main spindle. Required measuring tools metric precision calliper with /0 display accuracy or a calliper with inch display. efore measuring the thread, check in the manufacturer s manual or operating instructions whether you can obtain information on the thread from them. If necessary ask the manufacturer. Information on the model, and where appropriate the year of manufacture of the lathe will be very helpful. If no information on the thread size is available, proceed as follows:. Measuring the outer diameter of the thread In this instance it is important to determine whether the thread is a metric or an inch thread. One inch equals 25.4 mm. 25.0 mm thread would therefore be a metric thread (for metric thread sizes see Table ). It is very important to measure carefully here and read the measurement off accurately. For outer thread diameters see Illustration 3, measurement. Typical metric threads are: M8, M20, M24, M25, M30, M33, M40. If you find diameters with decimal places, the thread is an inch thread. The mm - inch conversion can be found in Table 2. 2. Measuring the thread pitch With a metric thread this is the gap from thread crest to thread crest (see Illustration 2); for thread pitch see Illustration 3, measurement. In the case of an inch thread it is the number of thread crests (also called turns) per inch, i.e. per 25.4 mm, which is determined. This is described as tpi (threads per inch). Illustration Illustration 2 3. Measuring the flange With some machines the flange can have a greater diameter than the thread itself. Measure the diameter of the flange as well (see Illustration 3, measurement C). 4. Determining the thread s direction of rotation With a RH (right-hand) thread the thread flanks rise towards the right when viewed from above, and with a LH (left-hand) thread towards the left. It is also possible to have RH/LH threads that are cut twice. Illustration 3 Table : Metric thread Ø in mm Gap in mm from thread crest to thread crest Metric thread sizes 8 2.5 M8 x 2,5 20 2 M20 x 2 20.5 M20 x,5 24 3 M24 x 3 25 2 M25 x 2 30.5 M30 x.5 30 3.5 M30 x 3.5 33 3.5 M33 x 3.5 DIN 800 standard on most lathes 40 6 M40 x 6 e.g. sweden dditional Information Thread form or flank angle of thread turn UNC, UNF /NF and metric threads (also called ISO threads) have a 60 angle Whitworth, SW, and SF threads have a 55 angle Metric or ISO Thread UNC (Unified National Coarse Thread) Designation e.g.: M33 x 3.5 means: Diameter 33 mm, pitch 3.5 mm. Designation e.g.: - 8 UNC means: Diameter inch - 8 turns per inch thread length. Table 2: Inch thread Thread diameter tpi or pitch in mm Inch thread sizes Ø in mm Ø in inches Number of threads per inch (tpi) Gap in mm Thread crest to thread crest 2.700 /2 20.27 /2 inch x 20 tpi 9.050 3/4 6.59 3/4 inch x 6 tpi UNF 9.050 3/4 4.8 3/4 inch x 4 tpi SP 9.050 3/4 0 2.54 3/4 inch x 0 tpi SW 22.225 7/8 4.8 7/8 inch x 4 tpi NF 25.400 2 2.2 inch x 2 tpi 25.400 0 2.54 inch x 0 tpi SF 25.400 8 3.8 inch x 8 tpi Dual Thread LH/RH 25.400 8 3.8 inch x 8 tpi UNC 28.575 /8 2 2.2 /8 inch x 2 tpi UNF 28.575 /8 7 3.62 /8 inch x 7 tpi SW 28.575 /8 7 3.62 /8 inch x 7 tpi UNC 3.750 /4 8 3.8 /4 inch x 8 tpi UNS 38.00 /2 6 4.23 /2 inch x 6 tpi SW RH/LH 38.00 /2 8 3.8 /2 inch x 8 tpi NF UNF / NF (Unified National Fine Thread) SW (ritish Standard Whitworth Coarse Thread) or Whitworth Designation e.g.: 3/4-6 UNF means: Diameter 3/4 inch - 6 turns per inch thread length. Designation e.g.: 3/4-0 WS means: Diameter 3/4 inch - 0 turns per inch thread length. SF (ritish Standard Fine Thread) Designation e.g.: - 0 SF means: Diameter inch - 0 turns per inch thread length. 29

Jaws for Talon and Stronghold The Oneway chuck jaws are equipped on the underside with a guide pin which engages with a guide groove in the body of the chuck. This is an important safety feature. Inadvertent unscrewing or exceeding the maximum clamping distance could in the worst case lead to flying jaw parts. 2 Oneway Jaws, Premium Profiled Serrated Serrated jaws are used during all standard clamping situations. It is possible to fix workpieces by clamping or spreading them. The serration on the inside of the jaws safely fixes the workpiece. The shape of the inner jaws is not completely round but angled. This patented design enables the jaws to safely clamp square stock and minimizes the damage of the surface. The jaws also have more contact points than conventional serrated jaws when clamping round stock. This enables a higher clamping force. Size 3 70 05 mm 85 20 mm No. 70246 Oneway Tower Jaws, Premium Profiled Serrated Tower jaws will excel when it comes down to turning long pieces without tailstock support. It is possible to fix workpieces by clamping or spreading them. The serration on the inside of the jaws safely fixes the workpiece. The shape of the inner jaws is not completely round but angled. This patented design enables the jaws to safely clamp square stock and minimises the damage of the surface. The jaws also have more contact points than conventional serrated jaws when clamping round stock. This enables a higher clamping force. Size 2 34 70 mm 50 88 mm No. 70249 2 3 8 9 mm 97 35 mm No. 7025 Size 3 93 36 mm 0 53 mm No. 70225 4 08 5 mm 22 66 mm No. 70227 Size 2 47 88 mm 68 2 mm No. 70230 2 3 88 30 mm 0 52 mm No. 70232 C D 2 c Oneway Spigot Jaws, Dovetail Profile For clamping smaller pieces these spigot jaws are the right choice. It is possible to fix workpieces by clamping or spreading them. The outside and inside surface of the jaws is smooth and not serrated. This enables you to gently clamp round workpieces. Only low clamping force can be practiced due to the non-serrated inside surface. 6-42 mm 29-65 mm No. 70243 8 53 mm 26 68 mm No. 70222 d Oneway Spigot Jaws, Premium Profiled Serrated For clamping smaller pieces these spigot jaws are the right choice. It is possible to fix workpieces by clamping or spreading them. The serration on the inside of the jaws safely fixes the workpiece. The shape of the inner jaws is not completely round but angled. This patented design enables the jaws to safely clamp square stock and minimizes the damage of the surface. The jaws also have more contact points than conventional serrated jaws when clamping round stock. This enables a higher clamping force. 6 42 mm 26 62 mm No. 70242 2 7 5 mm 27 7 mm No. 7022 30

2 / 3 Oneway Dovetail Jaws The outside and inside surface of the jaws is smooth and not serrated. This enables you to gently clamp round workpieces. Only low clamping force can be practiced due to the non-serrated inside surface. Size 2 36 7 mm 52 87 mm No. 70245 2 3 65 00 mm 85 20 mm No. 70247 Size 2 45 90 mm 63 06 mm No. 70224 2 3 90 33 mm 0 53 mm No. 70226 3 4 0 45 mm 22 66 mm No. 70228 Overview Oneway Jaws Chucking ranges Talon Stronghold min max min max min max min max Spigot Jaws, Premium Profiled Serrated No. 70242 6 mm 42 mm 26 mm 62 mm No. 7022 7 mm 5 mm 27 mm 7 mm Spigot Jaws, Dovetail Profile No. 70243 6 mm 42 mm 29 mm 65 mm No. 70222 8 mm 53 mm 26 mm 68 mm Dovetail Jaw # 2 No. 70245 36 mm 7 mm 52 mm 87 mm No. 70224 45 mm 90 mm 63 mm 06 mm Premium Profiled Serrated Jaws # 3 No. 70246 70 mm 05 mm 85 mm 20 mm No. 70225 93 mm 36 mm 0 mm 53 mm Dovetail Jaw # 3 No. 70247 65 mm 00 mm 85 mm 20 mm No. 70226 90 mm 33 mm 0 mm 53 mm Premium Profiled Serrated Jaws # 4 No. 70227 08 mm 5 mm 22 mm 66 mm Dovetail Jaw # 4 No. 70228 0 mm 45 mm 22 mm 66 mm Tower Jaws # 2, Premium Profiled Serrated No. 70249 34 mm 70 mm 50 mm 88 mm No. 70230 47 mm 88 mm 68 mm 2 mm Tower Jaws # 3, Premium Profiled Serrated No. 7025 8 mm 9 mm 97 mm 35 mm No. 70232 88 mm 30 mm 0 mm 52 mm Faceplate Segments # No. 70252 50 mm 200 mm 00 mm 250 mm No. 70233 52 mm 204 mm 04 mm 256 mm Faceplate Segments # 2 No. 70253 62 mm 262 mm 4 mm 34 mm No. 70234 62 mm 275 mm 5 mm 326 mm Faceplate Segments # 3 No. 70259 36 mm 7 mm 5 mm 86 mm No. 70235 68 mm 348 mm 20 mm 400 mm b Oneway Flat Jaws for individual clamping situations Wooden blocks are screwed to the face of the jaws which are then turned. This way you are able to make your own custom grip jaw set. Size Ø 50 mm No. 70254 Size Ø 65 mm No. 70236 C c Oneway Faceplate Segments These segments make it possible to clamp complex shapes in order to finish them, e.g. pieces without stub. No matter, whether you have to work round, oval or angled pieces, the movable rubber nubs keep hold of each workpiece. The clamping force is limited due to the construction of the jaws. In order to achieve larger dimensions of the segments they have been produced out of aluminium. This way the centrifugal forces are minimized compared to steel segments. Size 5 200 mm 0-25 mm No. 70252 2 73 273 mm 24-298 mm No. 70253 Size 76 26 mm 27-257 mm 2 70 279 mm 20-305 mm 3 44 355 mm 20-38 mm No. 70233 No. 70234 No. 70235 3

Chucks The Robert Sorby company has been known for its range of highquality woodworking tools for over 200 years. In Sheffield, England, traditional working methods are combined with technical expertise. This guarantees sophisticated tools with a quality that speaks for itself. Sorby Eccentric Chuck RS60 The excenter chuck from Sorby allows you to turn countless detailed and unusual figures and shapes with complete safety and precision. It is possible to produce items in batches thanks to precise repeatability. The axle offset can be set and read with infinite variability from 0 to 35 mm. The Sorby excenter chuck makes use of a counterweight to keep the workpiece as balanced as possible. This provides more stability, protects the stock and reduces the risk of an accident. The three well-engineered clamping methods (with the help of the included face chuck, screw bolt and hexagonal nozzle) gives you great flexibility. Working without a tailstock is also possible. Reversed German and English operating instructions from DICTUM. Model M33 x DIN 800 Ø 00 mm No. 720382 Model inch x 8 tpi With adapter suitable for inch x 8 tpi threads. Ø 00 mm No. 720425 Face chuck Screw bolt Hexagonal nozzle www.dictum.com Vide pplication video available online. b HGER Revolving Centre One bearing, the whole head rotates. Shaft diameter 20 mm Morse taper #3 MT Overall length 30 mm No. 705547 b c Oneway Spur Driver For use on lathes with hollow spindles to clamp workpieces for spindle turning. The springloaded point is adjustable in length via a set screw. Morse taper #2 MT Ø 25.4 mm Overall length 5 mm No. 70223 c Springloaded point d xminster spur driver, Standard spur driver for spindle turning. Ø 25.4 mm Overall length 00 / 5 mm Morse taper #2 MT No. 702269 #3 MT No. 702270 d 32

Robert Sorby clamping devices The sprung stainless steel tip and sharp teeth that bite into the wood will guarantee optimal hold. This works even on lathes where the axles (spindle stock to tailstock) are not 00 % aligned. Safe working is guaranteed. The geometry of the teeth also makes this exceptionally good for tensioning unusual shapes. To do this, the piece is tensioned between the Sorby revolving stepcentre and a Sorby driver. a Sorby Stebcentre Spur Driver, #2 MT Overall length 00 mm Ø 3 mm No. 720375 2 22 mm No. 720374 3 32 mm No. 720373 a 2 3 b Sorby Steb Chuck Driver Saves time and effort: The Sorby Step Driver can be easily placed and clamped on your current chuck. The need for time-consuming modifications is gone. Fits Oneway chucks Talon No. 70260 and Stronghold No. 70258. Overall length 50 mm Ø 3 mm No. 720377 2 22 mm No. 720378 3 32 mm No. 720376 b 2 3 c Sorby Revolving Stebcentre, #2 MT Largely inspired by Norwegian turner Petter Herud, the Revolving Stebcentre has been introduced. Not only does it offer the same degree of security as the conventional Stebcentre, but it allows the turner to do basic off-centre turning. Morse taper #2 MT Overall length 30 mm Ø 3 mm No. 72038 2 22 mm No. 720379 3 32 mm No. 720380 c 2 3 d Oneway Live Centre System This system is based on a two-bearing live centre with a cutting ring and a threaded shaft onto which you can fit different attachments including selfmade ones. Comes with a cone that can be used on both the inside and outside of turnings, as well as a large point and knockout rod. Cone diameter 90 mm, Point diameter 45 mm. d Morse taper #2 MT No. 70237 #3 MT No. 70238 e f e Quick-Release Chuck ECO with Morse Taper Good value for money. Quick-Release Chuck for craft and hobby use. For use on lathes, power routers and vertical drilling machines. Self-tightening and high-force clamping. No chuck key, tighten and release effortlessly by hand. Jaw opening 0.5-6 mm, jaws can be fully opened and close without gaps. Concentricity 0.08 mm, 6 taper shank, internal taper DIN 238. For clockwise rotation. Overall length 25 mm Morse taper #2 MT No. 705658 #3 MT No. 705659 f Heureka Chuck with 3 Rings For all soft to medium hardwoods. ecause the chuck rings only penetrate the wood to a reduced depth, the workpieces can be driven on directly. This reduces the extra length required and thus also material waste. M33 x 3.5 DIN 800 internal thread. With 3 cutting rings. Incl. wedge for removing the workpiece. No. 705569 33