Lucrări ştiinţifice și cărţi în domeniul disciplinelor din postul didactic A. Teza de doctorat: Tema: Contribuții la studiul cinematic și dinamic al sistemelor mecanice caracterizate prin modificări rapide ale parametrilor de mișcare Îndrumător: Prof. univ. dr. ing. Vasile Năsui Universitatea Tehnică Cluj Napoca Anul: 2014 B. Cărţi: 1. Crăciun, Ioana, 2015, Mecanica: Cinematica, Editura RISOPRINT, România, Cluj-Napoca, ISBN 978-973-53-1700-3 1. Crăciun, Ioana, 2015, Culegere de probleme de Mecanică: Statica, Editura RISOPRINT, România, Cluj-Napoca, ISBN 978-973-53-1701-0. C. Lucrări indexate ISI/BDI 1. Crăciun, I., About power and energy absorption at elevators with speed modeling, Academic Journal Of Manufacturing Engineering, VOL. 13, ISSUE 1/2015, pp. 33-38, ISSN 1583-7904, http://www.auif.utcluj.ro/images/ajme_13_1_2015/articol_final_craciun_ioana 2. Crăciun, I.,Ungureanu, M., Dăscălescu, A., Considerations on the kinematics of an elevator with speed modeling and continous deceleration, Annals of the University of Petroşani, Mechanical Engineering, Vol. 17 (2015), pp. 5-12, ISSN 1454-9166, http://www.upet.ro/annals/mechanical/ 3. Dăscălescu, A., Crăciun, I., The study of the reactions variation on the cycloid reducer satellite gear depending on the number of the roller teeth in gearing, Annals of the University of Petroşani, Mechanical Engineering, Vol. 17 (2015), pp.13-18, ISSN 1454-9166, http://www.upet.ro/annals/mechanical/ 4. Ungureanu M., Banciu M., Crăciun, I., Nondestructive testing for the brake systems of mining hoists, Annals of the University of Petroşani, Mechanical Engineering, Vol. 17 (2015), pp., ISSN 1454-9166, http://www.upet.ro/annals/mechanical/ 5. Crăciun, I., Considerations on the Power Absorption of an Elevator with Speed Modeling and Continuous Deceleration, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXIX (2015), pp. 23-25, ISSN 1224-3264, http://www.nordtech.ubm.ro/issues/2015/bssc_2015_issxxix_craciun.pdf 6. Stoicovici, D., Bănică, M., Ungureanu, M., Chira, F., Crăciun, I., Establishing the Parameter Behavior at a Simulation Program Based On a Stochastic Approach, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXVII (2013), pp. 66-69, ISSN 1224-3264, http://www.nordtech.ubm.ro/issues/2013/bssc_v2013_issxxvii_66to69.pdf
7. Crăciun, I., Ungureanu, M., Analysis Shock to Start and Stop an Elevator, Transactions of the VŠB-Technical University of Ostrava, Mechanical Series No. 2, 2012, vol. LVIII article No. 1916, http://transactions.fs.vsb.cz/2012-2/1916.pdf 8. Crăciun, I., About Power at Elevators with Motion Control, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXVI (2012), pp.13-16, ISSN 1224-3264, http://www.nordtech.ubm.ro/issues/2012/bssc_v2012_issxxvi_13to16.pdf 9. Crăciun, I., Study for elevator cage position, BULETIN ŞTIINŢIFIC, Seria C, Fascicola: Mecanica, Tribologie, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technologiy, Volume XXV (2011), pp. 73 77, ISSN 1224-3264, http://www.nordtech.ubm.ro/issues/2011/bssc_v2011_issxxv_73to77.pdf 10. Crăciun, I., On dynamical power for mechanical systems with designed acceleration profiles which limit jerk, SCIENTIFIC BULLETIN, Serie C, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, Volume XXV (2011), pp. 33-37, ISSN 1224-3264, http://www.nordtech.ubm.ro/issues/2011/bssc_v2011_issxxv_33to37.pdf 11. Crăciun, I., Stoicovici, D., Horgoș, M., About the transitory regime of the mining extraction machine, Annals of the University of Petroşani, Mechanical Engineering, Vol. 12 (2010), pp. 59-64, ISSN 1454-9166, http://www.upet.ro/annals/mechanical/pdf/2010/annals-mechanical-engineering-2010- a7.pdf 12. Drăgan, L., Chira, F., Crăciun, I., Kinematic modeling of the free human limbs, ISI Proceedings of The 14th International Conference ModTech 2010, Modern Technologies, Quality and Innovation, New Face of T.M.C.R., May 20 2010, ISSN 2066-2919. 13. Stoicovici, D., Ungureanu, M., Crăciun, I., The position of vibrating mechanism center mass as a factor of influence on screening, SCIENTIFIC BULLETIN, Serie C, Volume XXIII, Fascicle: Mechanics, Tribology, Machine Manufacturing Technologiy, ISSN 1224-3264, pp.657-660, http://www.nordtech.ubm.ro/issues/2007/2007.02.43.pdf 14. Stoicovici, D., Ungureanu, M., Chira, F., Crăciun, I., Preventive maintenance practical aplication case for air piston compressor, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume V (XV), ISSN 1583-0691, cod CNCSIS 564, pp. 155-158. 2007, http://imtuoradea.ro/auo.fmte/article.php?v1=2007 15. Stoicovici, D., Horgoș, M., Crăciun, I., Contribution to establish the optimal jump regime in the case of screening critical humidity material, Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume V (XV), ISSN 1583-0691, cod CNCSIS 564 pp. 26, http://imtuoradea.ro/auo.fmte/article.php?v1=2006 D. Lucrări publicate în reviste şi volume de conferinţe cu referenţi (neindexate 1. Crăciun, I., Ungureanu, M., Drăgan, L., About jerk at the start and stop of an electrical powered elevator, 12th International Conference Automation in Production Planning and Manufacturing, Žilina, 2011, pag.72-74, ISBN 978-80-89276-28-8.
2. Ungureanu, M., Crăciun, I., Cosma, M.,Damian, F., Study of the jerk at the start and stop of an electrical powered elevator, SCIENTIFIC BULLETIN, Serie C, Volume XXV, Fascicle: Mechanics, Tribology, Machine Manufacturing Technologiy, Baia Mare (România), Nyiregyhaza, (Ungaria) 2011. pg.101-106. ISSN 1224-3264, 3. Ursu Fischer, N., Ursu, M., Crăciun, I., The 3D representation of the lifted load displacement, due to the cable elasticity. Acta Technica Napocensis, Series: Applied Mathematics and Mechanics, 52, vol. Ia, pp. 389 394, Universitatea Tehnică Cluj Napoca, International Conference on Engineering Graphics and Design, 12 13 iunie 2009, ISSN 1221-5872 4. Crăciun, I., Ungureanu, M. Dynamics of starting up of the double-drum hoist SCIENTIFIC BULLETIN, Serie C, Volume XXIII, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology ISSN-1224-3264, 21-22 May 2009 5. Stoicovici, D.I., Ungureanu, M., Crăciun, I., The position of vibrating mechanism center mass as a factor of influence on screening The Proceedings of the 7th International Multidisciplinary Conference Baia Mare, Romania, SCIENTIFIC BULLETIN, Serie C, Volume XXI, Fascicle: Mechanics, Tribology, Machine Manufacturing Technology, pp.657 660, May 17-18, 2007 ISSN-1224-3264, 6. Crăciun, I., An explicite relation for the determination of a point having a given second degree acceleration, Acta Technica Napocensis, Series: Applied mathematics and Mechanics, 2005, Nr. 48, vol. I, pag. 57, ISSN 1221-5872. 7. Crăciun, I., O relaţie explicită pentru determinarea unui punct al unui solid rigid având acceleraţia dată. În volumul: North University of Baia Mare, Scientific Bulletin, Serie C, volume XVIII, Supplement, at The National Meeting with International Participation NORDTECH 2004, Baia Mare 2004, pag.59, ISSN-1224-3264 8. Crăciun,I., O relaţie explicită pentru determinarea unui punct având acceleraţia de ordinul al doilea dată. Scientific Bulletin, Serie C, volume XVIII, Supplement, at The National Meeting with International Participation NORDTECH 2004, Baia Mare 2004, pag.63. ISSN 1224-3264. 9. Crăciun, I., Contribuţii la studiul dinamic al maşinilor vibratoare ; în Analele Universităţii din Oradea; Lucrările Sesiunii Anuale de Comunicări Ştiinţifice cu participare internaţională IMT Oradea-2002, Fascicula: Inginerie managerială şi tehnologică, Secţiunea:Mecanică, pag.51, ISSN 1224-3264. 10. Crăciun,I., Crăciun,M., Contribuţii la stabilirea unor relaţii generalizate de calcul al maşinilor vibratoare, Buletin Ştiinţific, Seria C, Volumul XV, Fascicola: Mecanică, Tribologie, Tehnologia Construcţiilor de Maşini, Universitatea de Nord Baia Mare; Partea I, Baia Mare, 2001, pag.87. ISSN 1224-3264. 11. Crăciun, I., Crăciun, Ioana, Crăciun, M., Problema punctelor de viteză dată şi de acceleraţie dată în cinematica solidului rigid Buletin Ştiinţific, Seria C, Vol. XV, Fascicola: Mecanică, Tribologie, Tehnologia Construcţiilor de Maşini, Partea I, pg.83, Universitatea de Nord din Baia Mare, Baia Mare, ISSN 1224-3264. 2001. 12. Stoicovici, D.I., Maloş, I., Contributions at the influence of the ratio material weight total vibrating weight in dynamical study of vibrting screens. Scientific Bulletin. Serie C, Volume XV,Fascicle: Mechanics, Tribology, Technology of Machine Manufacturing, Part IV. International Multidisciplinary Conference, 4th Edition. 25-26 may 2001,Baia Mare Pp. 267-270. ISSN 1224-3264. 2001. 13. Stoicovici, D.I., Maloş, I., Crăciun, M., Contribuţii la studiul mişcării particulelor de material pe ciururile vibratoare, micro-cad 2001 International Computer Science
Conference. Section M: Applied Mechanical Engineering Sciences. Miskolc, Hungary, ISBN 963 661 457 1 x ö, ISBN 963 661 469 5, 2001. 14. Crăciun,I., Crăciun, Ioana, Crăciun, M., Studiul stării spaţiale de tensiuni în raport cu un sistem de coordonate sferice, Buletin Ştiinţific, Seria C, Volumul XV, Fascicola: Mecanică, Tribologie, Tehnologia Construcţiilor de Maşini, Partea I, Universitatea de Nord Baia Mare; 2001, pag.75, ISSN 1224-3264. 15. Stoicovici, I.D., Maloş, I., Crăciun, M., Contributions at the dynamical study of vibrating screens, microcad 2000 International Computer science Conference. Section M: Applied Mechanical Engineering Sciences. Miskolc, Hungary, 2000. ISBN 963 661 413 x o, ISBN 963 661 426 1.pp.231-234. 16. Crăciun I., Stoicovici D., Maloş, I., Crăciun M., Contributions at the calculus of the principal tensions in the case of the general tension state. microcad'2000 International Computer Science Conference, February 23-24, 2000, Section M: Applied Mechanical Engineering Sciences, University of Miskolc, Hungary, ISBN 963 661 413 x o, ISBN 963 661 426 1 17. Crăciun, I., Maloş, I., Crăciun, M., Contributions at the definition and classification of some particular motions of the Rigid Body microcad'99 International Computer Science Conference, February 24-25, 1999, Section M:Mechanical Engineering Sciences, University of Miskolc, Hungary. 18. Crăciun I., Maloş, I., Crăciun M., Contributions at the study of principal inertia axes and principal inertia moments of the system of material point. microcad'99 International Computer Science Conference, February 24-25, 1999, Section M:Mechanical Engineering Sciences, University of Miskolc, Hungary. ISBN 963 661 413 x o, ISBN 963 661 426 1 19. Maloş, I., Contributions at the study of the dynamic influence of the electric motor on the motion of the mining extraction machine. microcad'99 International Computer Science Conference, February 24-25, 1999, Section M:Mechanical Engineering Sciences, University of Miskolc, Hungary. ISBN 963 661 413 x o, ISBN 963 661 426 1 20. Crăciun I., Maloş, I., Maloş M., On the Geometrical Inertia Moments of Plane Surfaces. microcad'98 International Computer Science Conference, February 25-26, 1998, Section 21. Maloş, I., Contributions on the study of the influence of shocks of the movements of the extractions machines, microcad'98 International Computer Science Conference, February 25-26, 1998, Section L:Mechanical Engineering Science, University of Miskolc, Hungary, ISBN 963 661 413 x o, 22.Maloş, I., On the transitory movements at the start and stop of the mining extraction machines, microcad'97 International Computer Science Conference, February 26-27, 1997, Section L:Mechanical Engineering Science, University of Miskolc, Hungary, ISBN 963 661 413 x o, 23. Maloş I., Crăciun I., Crăciun M., Bănică M., On the schematization of High diagram, microcad'97 International Computer Science Conference, February 26-27, 1997, Section 24. Maloş, I., Maloş, M., Contributions at the study of the transitory movements of the mining extraction machines. În volumul: microcad'96 International Computer Science Conference, February 29, 1996, Section L:Mechanical Engineering Science, University of Miskolc, Hungary, ISBN 963 661 413 x o,
25. Crăciun, I., Maloş, I., Maloş, M., On the Notion of Principal inertia Moments, microcad'96 International Computer Science Conference, February 29, 1996, Section 26. Maloş, I, Crăciun, I., Maloş M., Contributions at the Dynamical Study of the Mining Extraction Machines, microcad'95 International Computer Science Conference, February 25, 1995, Section J: Machine and Structure Design, University of Miskolc, Hungary, ISBN 963 661 413 x o, 27. Crăciun, I., Maloş, I., Maloş, M., Contributions at the dynamical Study of the Vibrating machines. A classification from a Dynamic Point of View of the Vibrating machines. microcad'95 International Computer Science Conference, February 25, 1995, Section J: Machine and Structure Design, University of Miskolc, Hungary, ISBN 963 661 413 x o, ISBN 963 661 426 1. E. Lucrări didactice fără ISBN 1. Crăciun, I, Mecanica. Îndrumător de lucrări de laborator. Universitatea de Nord din Baia Mare, 2009. F. Membru în echipă grant național Nr. 12/28.08.2015, Beneficiar: S.C. INTERCONTI INDUSTRIE S.R.L. Baia Mare: Studiu și soluție pentru dispozitivul de prindere KLAUKE AMG41-F in vederea asimilării în producție de către S.C. INTERCONTI INDUSTRIE S.R.L. Data Semnătura