AREA LIGHTING HYPAK SERIES HYPAK - HP3 HYPAK - HP4
Hypak Area Lights - HP3 and HP4 Hypak - a series of high performance building mounted luminaires providing maximum versatility. Innovative optical design, low profi le fi xtures, and practical mechanical layout make Hypak a complete lighting system easy to specify, install, and maintain. Hypak s low profi le design and soft light are ideal for area lighting applications where control and visual comfort are important. 1
2 The HP3 Series a versatile complement to the larger HP4 luminaires.
These units, offering eight unique light distributions, may be wall or ceiling mounted. Low level uses include illumination of stairways, pedestrian areas, entrances, ramps, and driveways. At higher levels, the HP3 is used to illuminate industrial work spaces, aisles, and garages. The HP3 Series is a compact, low glare, high performance luminaire for HID lamps to 150 Watts. Any one of eight light distributions within a single housing are created by combining one of two lenses and a choice of three refl ectors. Symmetrical and asymmetrical distributions are available. The refl ector and lens design provide excellent cutoff glare control and photometric performance. The result is visual comfort and performance found with a lower number of fi xtures. 3
SPECIFICATIONS - HP3 WALL MOUNT Compact, one-piece lens door made of tough molded Lexan polycarbonate. High-performance reflectors provide four different wall mount distributions. Extruded aluminum reflectors are Alzak treated for long-term, uniform lighting. Shallow and compact, durable, heat-dissipating one-piece die cast aluminum housing. Optional direct conduit entry for easy, straight-through wiring. Fresnel linear spread lens for uniform light distribution. Durable stainless steel fasteners are easily removed for fixture access. Long lasting silicon gaskets completely seal the fixture to protect against water and bugs. Pulse rated porcelain sockets for medium base (or E-27) HID lamps to 150 Watts. Quick disconnects included for easy reflector installation or removal. High power factor ballasts mounted to housing for maximum heat dissipation, long life, and reliable lamp starting. Easy surface or recessed installation. Integrally cast knockouts provided for rear 4-0 box entry or independent mounting. Housing will be pre-shipped with RDE & RSB mountings. CEILING MOUNT Fresnel spread lens for uniform light distribution. High-performance reflectors provide three different ceiling mount distributions. Hydroform aluminum reflectors are Alzak treated for longterm, uniform lighting. High power factor ballasts mounted to housing for maximum heat dissipation, long life, and reliable lamp starting. Optional direct conduit entry for easy, straight-through wiring. Durable stainless steel fasteners are easily removed for fixture access. 4 Long lasting Silicon gaskets completely seal the fixture to protect against water and bugs. Pulse-rated porcelain sockets for medium base (or E-27) HID lamps to 150 Watts. Quick disconnects included for easy reflector installation / removal. Durable, heat-dissipating one-piece die cast aluminum housing is shallow and compact. Easy surface or recessed installation. Integrally cast knockouts provided for rear 4-0 box entry or independent mounting. U.L. LISTED FOR WET LOCATIONS C.S.A. LISTED
APPLICATION GUIDELINES - HP3 WALL MOUNT HORIZONTAL ILLUMINANCE RECOMMENDATIONS IN FOOTCANDLES (FC) LEVEL 1 MEDIUM LIGHT LEVEL Public access area with some protection, unfenced. Moderate light required for visibility and security. Recommended light level - 0.5 FC MIN LEVEL 2 HIGH LIGHT LEVEL High public access area with no protection. Lighting required for good visibility and security. Recommended light level - 1 FC MIN LEVEL 3 VERY HIGH LIGHT LEVEL Where maximum light level is required for highest visibility and security and/or accenting for sales impact. Recommended light level - 5 FC MIN HFW: HIGH FORWARD WALL DISTRIBUTION IES FILE: ITL33160 100M HFW @ 10 (0.5 FC MIN) 100M HFW @ 10 (1 FC MIN) 100M HFW @ 10 (5 FC MIN) 33 30 18 LHW: LOW HORIZONTAL WALL DISTRIBUTION IES FILE: ITL33869 100M LHW @ 3 (0.5 FC MIN) 100M LHW @ 3 (1 FC MIN) 100M LHW @ 3 (5 FC MIN) 32 27 17 * HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE. * PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT. * RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS. 5
APPLICATION GUIDELINES - HP3 WALL MOUNT LFW: LOW FORWARD WALL DISTRIBUTION IES FILE: ITL33163 100M LFW @ 3 (0.5 FC MIN) 20 100M LFW @ 3 (1 FC MIN) 100M LFW @ 3 (5 FC MIN) 12 17 LLW: LOW LEFT WALL DISTRIBUTION LRW: LOW RIGHT WALL DISTRIBUTION IES FILE: ITL33870 100M LLW/LRW @ 2 (0.5 FC MIN) * * * 6 100M LLW/LRW @ 2 (1 FC MIN) 100M LLW/LRW @ 2 (5 FC MIN) HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE. PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT. RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS.
APPLICATION GUIDELINES - HP3 CEILING MOUNT HSC: HIGH SYMMETRICAL DISTRIBUTION IES FILE: ITL33168 100M HSC @ 10 (0.5 FC MIN) 100M HSC @ 10 (1 FC MIN) 100M HSC @ 10 (5 FC MIN) 21 24 12 HNC: HIGH NARROW DISTRIBUTION IES FILE: ITL33171 100M HNC @ 10 (0.5 FC MIN) 22 100M HNC @ 10 (1 FC MIN) 100M HNC @ 10 (5 FC MIN) 18 9 HAC: HIGH ASYMMETRICAL DISTRIBUTION IES FILE: ITL33172 100M HAC @ 10 (0.5 FC MIN) 22 * * 100M HAC @ 10 (1 FC MIN) 100M HAC @ 10 (5 FC MIN) 18 PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT. RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS. 10 7
MOUNTINGS - HP3 SNB SURFACE Surface mounting over recessed junction box (by others). Knockout mounting holes provided. SNB - FRONT SNB - SIDE SNB - BACK 12 3/8 Two (2) 1/4 mounting holes for wall anchor bolts (bolts by others) 2 1/4 7 Recessed 4-0 box (by others) Cast knockouts for 4-0 box mounting SDE SURFACE, DIRECT ENTRY Applications for direct conduit entry. Two (2) 1/2 NPS openings standard. SSB SURFACE WITH SPLICE BOX Cast aluminum splice box included. 3/4 NPS openings standard. 12 7/8 SDE/SSB - FRONT SDE/SSB - SIDE SDE/SSB - BACK 12 3/8 5 7/8 9 6 1/4 1 SDE: Two (2) 1/2 NPS side direct conduit entries SSB: Two (2) 3/4 NPS side direct conduit entries in splice box Two (2) 1/4 mounting holes for wall fasteners (fasteners by others) 2 1/4 7 RDE RECESSED, DIRECT ENTRY Applications for direct conduit connections. Two (2) 1/2 NPS openings standard. RSB RECESSED WITH SPLICE BOX Cast aluminum splice box included. 3/4 NPS side or bottom openings available. 12 7/8 RDE/RSB - FRONT RDE/RSB - SIDE RDE/RSB - BACK 12 3/8 8 Min. RDE: Two (2) 1/2 NPS side direct conduit entries RSB: Two (2) 3/4 NPS side direct conduit entries in splice box Housing is held to front form with #10-24 fasteners threaded into housing. (fasteners by others) 6 3/16 11 5/8 5 11/16 10 5/8 BMS BASE, SINGLE Base mounting over recessed junction box (by others). Mounting plate provided. BMT BASE, TANDEM Twin base mounting over recessed junction box (by others). 12 7/8 BMS - FRONT BMS - SIDE BMT - TANDEM 12 3/8 Recessed 4-0 box (by others) 9 6 1/4 5 5/8 Four (4) set screws secure fixture to supplied mounting 18 5 5/8 12 7/8 8
MOUNTINGS - HP3 SPM PENDANT, SINGLE Top pendant mounting below recessed junction box (by others). Set screws secure fixture to supplied mounting. TPM PENDANT, TANDEM Twin pendant mounting below recessed junction box (by others). Set screws secure fixture to supplied mounting. 12 7/8 SPM - FRONT SPM - SIDE TPM - TANDEM 12 3/8 Recessed 4-0 box (by others) 5 5/8 6 1/4 9 Four (4) set screws secure fixture to supplied mounting 5 5/8 18 12 7/8 PMS POLE, SINGLE Pole mounting on 2 3/8 dia. x 4 long tenon (by others) slip fitter secures with supplied fastener bolts. PMT POLE, TANDEM Twin Pole mounting on 2 3/8 dia. x 4 long tenon (by others) slip fitter secures with supplied fastener bolts. PFD PLASTER FRAME FOR DIRECT ENTRY Applications for direct conduit connections. Recessed in dry walls or ceilings. Two (2) 1/2 NPS openings standard. PFS PLASTER FRAME WITH SPLICE BOX Recessed in dry walls or ceilings. Knockouts available for Junction box (by others). SNB SDE SSB SURFACE (CEILING) Mountings are Standard in Ceiling mounted versions when ordering HSC, HNC and HAC distributions. 3 3/8 PMS - FRONT PMS - SIDE PMT - TANDEM 12 3/8 12 3/8 5/8 9 6 1/4 14 3/4 PFD/PFS - FRONT PFD/PFS - SIDE PFD/PFS - BACK 12 3/8 Recessed 4-0 Box (by others) 6 1/4 9 PFD: Two 1/2 NPS side direct conduit entries PFS: Cast knockouts for 4-0 box mounting (4-0 box by others) 6 1/4 9 11 3/4 18 4 1/8 12 3/4 Cast knockouts for 4-0 box mounting 15 1/2 Eight (8) 1/4 dia. holes for attaching to dry wall plaster frame SNB/SDE/SSB - BOTTOM SNB - SIDE SDE/SSB - SIDE Two 1/2 NPS side direct conduit entries 1 11/16 RSB: Two (2) 3/4 NPS side direct conduit entries in splice box 9
10 The HP4 Series high performance building mounted luminaires provide maximum versatility.
Innovative optical design, low profi le fi xtures and practical mechanical layout make HP4 lighting systems easy to specify, install, and maintain. HP4 low profi le design and soft light are ideal for area lighting application where control and visual comfort are important. Common applications include building security, pedestrian areas, industrial work areas, garage, and parking areas. This wall mounted luminaire provides uniform light for large areas with excellent glare control to minimize intrusion. The Hypak HP4 is a versatile high performance sharp vertical cutoff luminaire capable of meeting all the needs of high level area lighting. The unit can be surface-mounted, recessed, pole, post, pendant, and base mounted to allow for maximum versatility. To insure long maintenance-free service, Hydrel uses a single die cast aluminum housing and a vandal resistant polycarbonate projecting lens. All hardware is stainless steel. Silicone gaskets assure weather and bug tight seals. 11
SPECIFICATIONS - HP4 WALL MOUNT One piece Lexan hinged lens door is impact and vandal resistant. Stainless steel hinges provide easy door removal for fixture access. Long lasting silicone gaskets provide protection against water and bugs. High performance reflector is adjustable through sharp cutoff range of 70 to 85. Unique three piece extruded aluminum reflector construction. Alzak treated aluminum for long term optical performance. Housing is durable, heat dissipating one piece die-cast aluminum. Integral cast knockouts provided for rear 4-0 box entry or independent mounting. Fresnel linear spread lens of U.V. stabilized clear polycarbonate lens. Durable stainless steel fasteners are easily removed for fixture access. Internal aiming scale is used for easy, accurate cut-off adjustment. Pulse-rated porcelain lamp sockets accept HID lamps to 250 Watts. Quick disconnects are included for easy removal or installation of the reflector assembly. High power factor ballasts are mounted directly to the housing for maximum heat dissipation, long life and reliable lamp starting. Heavy-duty polyester powder coat finish for long-term fixture performance. Housing will be pre-shipped with RSB mounting. Door rod holds door in open position for easier lamp replacement and maintenance. Easy access, quarter turn fasteners quickly releases reflector assembly. Reflector assembly is counterbalanced to provide easy access to ballast wiring area for installation and maintenance. 12 U.L. LISTED FOR WET LOCATIONS C.S.A. LISTED
APPLICATION GUIDELINES - HP4 WALL MOUNT HORIZONTAL ILLUMINANCE RECOMMENDATIONS IN FOOTCANDLES (FC) LEVEL 1 MEDIUM LIGHT LEVEL Public access area with some protection, unfenced. Moderate light required for visibility and security. Recommended light level - 0.5 FC MIN LEVEL 2 HIGH LIGHT LEVEL High public access area with no protection. Lighting required for good visibility and security. Recommended light level - 1 FC MIN LEVEL 3 VERY HIGH LIGHT LEVEL Where maximum light level is required for highest visibility and security and/or accenting for sales impact. Recommended light level - 5 FC MIN HP4 175M @ 70 REFLECTOR ANGLE IES FILE: ITL31755 51 44 24 HP4 175M @ 76 REFLECTOR ANGLE IES FILE: ITL31756 51 44 24 HP4 175M @ 85 REFLECTOR ANGLE IES FILE: ITL31757 53 45 24 * HORIZONTAL FC LEVELS ARE BASED ON 0% WALL REFLECTANCE. * PLEASE VISIT WWW.HYDREL.COM TO DOWNLOAD DETAILED PERFORMANCE DATA IN IES FORMAT. * RECOMMENDED LIGHT LEVELS FOR USE AS APPLICATION GUIDELINES ONLY, ACTUAL APPLICATIONS MAY REQUIRE DIFFERENT LEVELS. 13
MOUNTINGS - HP4 SNB SNB - FRONT SNB - SIDE SNB - BACK SURFACE Surface mounting over recessed junction box (by others). Knockout mounting holes provided. 16 3/8 6 7/8 Four (4) 1/4 mounting holes for wall anchor bolts (bolts by others) 12 3 5/8 15 5/8 Recessed 4-0 box (by others) Cast knockouts for 4-0 box mountings SSB SURFACE WITH SPLICE BOX For applications where conduit is run on surface. Cast aluminum splice box included. 3/4 NPS openings standard. 17 7/16 15 5/8 SSB - FRONT SSB - SIDE SSB - BACK 16 3/8 6 7/8 Four (4) 1/4 mounting holes for wall anchor bolts (bolts by others) 12 3 5/8 5 7/8 Two (2) 3/4 NPS side conduit entries in splice box. RSB RSB - FRONT RSB - SIDE RSB - BACK RECESSED WITH SPLICE BOX (Concrete Installation) For applications where unit needs to be recessed in concrete. Cast aluminum splice box included. 3/4 NPS openings standard. Housing back box can be pre-installed. 17 7/16 15 5/8 16 3/8 8 1/2 min. 4 13/16 Housing is held to front form with #10-24 fasteners threaded into housing. (fasteners by others) 13 5/8 Two (2) 3/4 NPS side conduit entries in splice box. 14
MOUNTINGS - HP4 BMS BASE MOUNT, SINGLE Base mounting over recessed junction box (by others). Mounting plate provided. BMT BASE MOUNT, TANDEM Twin base mounting over recessed 4-0 box (by others). Mounting plate provided. 17 7/16 15 5/8 BMS - FRONT BMS - SIDE BMT - TANDEM 16 3/8 5 15/16 Recessed 4-0 box (by others) 6 7/8 5 1/2 Four (4) set screws secure fixture to supplied mounting 22 3/4 5 1/2 17 5/8 SPM PENDANT, SINGLE Top pendant mounting below recessed junction box (by others). Mounting plate provided. TPM PENDANT, TANDEM Twin pendant mounting below recessed junction box (by others). Mounting plate provided. 17 1/16 15 5/8 SPM - FRONT SPM - SIDE TPM - TANDEM 5 15/16 Recessed 4-0 box (by others) 16 3/8 5 1/2 6 7/8 Four (4) set screws secure fixture to supplied mounting 5 1/2 22 3/4 17 5/8 PMS POLE, SINGLE Pole mounting on 2 3/8 dia. x 4 long tenon (by others). Slip fitter secured with supplied fastener bolts. PMT POLE, TANDEM Twin pole mounting on 2 3/8 dia. x 4 long tenon (by others). Slip fitter secured with supplied fastener bolts. PMS - FRONT PMS - SIDE PMT - TANDEM 22 3/4 16 3/8 6 7/8 15 5/8 19 3/4 19 4 1/8 3 3/8 15
ORDERING GUIDE - HP3 HP3 Wall Mounted EXAMPLE: HP3 150M 120 HFW SDE SF LPI BL Model HP3 Lamps Voltage INCANDESCENT: 120 116I A21, med. base 208 HID: 50S E17, med. base 220 240 70S E17, med. base 277 100S E17, med. base 347 150S 1 E17, med. base 120/277 50M E17, med. base TB 70M E17, med. base TBV 100M E17, med. base 150M 1 E17, med. base 100H B17, med. base Notes: 1 Not available with RSB and RDE. 2 Includes two fixtures and one mounting. 3 SF is only available with 120, 277 or 347 Volt, HID only. 4 DF is only available with 208, 220 or 240 Volt, HID only. 5 NEMA twist-lock receptacle only. Photo control by others. Distribution Mounting HFW High Forward Wall LHW Low Horizontal Wall BMS Base mount, single LFW Low Forward Wall BMT 2 Base mount, LLW Low Left Wall tandem LRW Low Right Wall PFD Plaster frame, HSC High Symmetrical Ceiling direct entry HNC High Narrow Ceiling PFS Plaster frame, HAC High Asymmetrical Ceiling splice box PMS Pole, single PTM 2 Pole, tandem RDE Recessed, direct entry RSB Recessed, splice box SDE Surface, direct entry SNB Surface, no box SPM Pendant, single SSB Surface, splice box TPM 2 Pendant, tandem Options SF 3 Singe Fuse DF 4 Double Fuse PER 1,5 Photo Control Receptable QRS Quartz Emergency Restrike LPI Lamp Lamp Included BL Black BZ Bronze DDB Dark Bronze DNA Natural Alum. GN Green GR Gray SND Sand STG Steel Gray TVG Terra Verde Green WH White CF Finish Custom Finish WH DNAT GR STG SND TVG BZ GN DDB BL 16
ORDERING GUIDE - HP4 EXAMPLE: HP4 250M 120 SNB SF LPI BL Product Lamp Type Voltage Optional Lenses 2 Mounting Option HP4 HID: 120 FLG 3 Flat Lens BMS Base Mount, SF 6 Single Fuse 100S ED23 ½ Mogul 208 Tempered Glass Single DF 7 Double Fuse 150S ED23 ½ Mogul 220 FLP 4 Flat Lens BMT 5 Base Mount, PER 1,8 Photo Cell 250S 1 ED28 Mogul 240 Polycarbonate Tandem Receptacle 175M ED28 Mogul 277 PMS Pole Mount, QRS Quartz Re-Strike 200M 1 ED28 Mogul 347 Single 250M 1 ED28 Mogul 480 PTM 5 Pole Tandem, 250H 1 ED28 Mogul 120/277 Mount TB RSB Recessed with TBV Splice Box SNB Surface, No Box SPM Single Pendant Mount TPM 5 Tandem Pendant Mount Notes: SSB Surface with 1 Not available with RSB mounting. Splice Box 2 Will be used in place of standard lens. 3 175 Watt maximum, reflector is not adjustable with this lens. 4 150 Watt maximum, reflector is not adjustable with this lens. 5 Includes two fixtures and one mounting. 6 SF is only available with 120, 277 or 347 volts on HID only. 7 DF is only available with 208, 220 or 240 volts on HID only. 8 NEMA twist-lock receptacle only. Photo control by others. Lamp LPI Lamp Included Finish BL Black BZ Bronze DDB Dark Bronze DNA Natural Alum. GN Green GR Gray SND Sand STG Steel Gray TVG Terra Verde Green WH White CF Custom Finish WH DNAT GR STG SND TVG BZ GN DDB BL 17
12881 Bradley Avenue, Sylmar, CA 91342 T 818.362.9465 F 818.362.6548 Email: custserv@hydrel.com www.hydrel.com Form No. 106.15 11/04 2004 Acuity Brands, Inc. All rights reserved. Hydrel is a trademark of Acuity Brands, Inc.