mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile design with mounting height.mm. () Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. () For horizontal connection, the board to board size is the low profile of.mm. () Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. (1) The board pre-fixed kink is treated with the post pin. () The style employs a scoop-proof and sturborn box type. () The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. In-line Plug (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. () The in-line adapter is available to insert and in-line the ID socket from both sides.. UL, CSA Certified Applications Business equipment such as copy machine and printer B
Product Specifications Rating Current rating Note 1 Crimping Wire size to AWG : A AWG : A AWG : 1A Operating Temperature Range Operating Humidity Range Storage Temperature Range -ç to +ç (Note ) 0% to 80% (Note ) -ç to +0ç (Note ) Voltage rating Crimping 0V AC Storage Humidity Range 0% to 0% (Note ) Rating UL-CSA Safety Standard and Approved specification Rated Current Rated Voltage AWG : A Wire size AWG : A (Note ) AWG : 1A 0V AC UL CSA Safety Standard File No. UL : E CSA : LR99 Item Specification Condition 1. Insulation Resistance 00Mø min. 00V DC. Withstanding voltage No flashover or insulation breakdown. 0V AC, 1 minute. Contact Resistance 0mø max 0mA. Single Insertor/Extraction Force 0.N(0gf)min,.N(0gf)max. Measure by the square steel pin with 0.±0.00mm. Vibration No electrical discontinuity of 1μs or more Frequency : to Hz, single amplitude of 0. mm, hours in each of the directions.. Humidity (Steady state) Contact resistance : 0mø max. Insulation resistance : 00Mø min. 9 hours at temperature of 0ç and humidity of 90% to 9%. Temperature Cycle Contact resistance : 0mø max. Insulation resistance :00Mø min. (-ç : 0 minutes to ç: minutes 8ç: 0 minutes to ç: minutes) cycles 8. Durability (Mating/un-mating) Contact resistance : 0mø max. Tin plating : 0 cycles Gold plating: 0 cycles THT type Flow : 0ç for seconds Manual soldering : 00ç for seconds 9. Resistance to Soldering Heat No deformation of components affecting performance. SMT type Reflow : At the recommended temperature profile Manual soldering : 00ç for seconds Note 1 : Current rating of header is A. Note : Includes temperature rise caused by current flow. Apply to crimping contact type. Maximum operating temperature of receptacle type is 8ç. Note : Please use under conditions with no condensation occurred. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note : Apply to crimping contact type. Materials / Finish Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Black UL9V-0 IDC Contact for Socket Contact Phosphor bronze Tin plated or gold plated Receptacle Insulator Polyamide Black UL9V-0 Contact Phosphor bronze Tin plated or gold plated Pin Header Insulator Polyamide Black UL9V-0 Contact Brass Tin plated or gold plated Insulator Polyamide Beige UL9V-0 SMT Pin Header Contact Brass Tin plated or gold plated Metal tab Brass Tin plated In-line Plug Insulator Polyamide Black UL9V-0 In-line IDC Contact Contact Phosphor bronze Tin plated or gold plated In-line Adapter Insulator Polyamide Black UL9V-0 Contact Brass Tin plated B
Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Connector DF - * q w S - C e r t Contact Application pattern q Series Name : DF, A, AA, EA t Connection Form/Contact Style w Number of Contacts : ~ C : Crimp socket e Connector Type S : Socket DSA : Straight through hole DS : Right angle through hole P : Pin Header V : Straight SMT EP : In-line Plug H : Right angle SMT r Contact Pitch : mm A : Adapter DF - EPPCFA q w e r q Contact Type e Contact Type/Packaging Type Blank : For socket SCF : Socket contact, Reel EP : For in-line plug SC : Socket contact, Pack w Applicable Wire Size PCF : Plug contact, Reel : AWG PC : Plug contact, Pack : to AWG r Plating Type Blank : Tin plated A : Gold plated (Plug contact) C : Gold plated (Socket contact) DF- S-C DF(A)- P-DS(**) DFEA-πP-H(**) DFAA- EP-C Panel DF- S-C DFEA-πP-V(**) DF(A)- P-DSA(**) DF- S-DSA(**) DF(A)- P-DS(**) DFEA-πP-H(**) Panel DFAA- EP-C DFEA-πP-V(**) DF(A)- P-DSA(**) B9
Crimping Socket [Specific No.] (* *), * * Blank : 0pcs/pack This picture shows the Contact crimped status. DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-8S-C(**) Receptacle -000-8 ** -000-0 ** -000- ** -00- ** -000-9 ** -00-1 ** -0009- ** No. of Contacts 8 A B RoHS Note1 : The product's contact number indicated. Note : The quantity for delivery of the specification No. "None" is determined per bag (0 pcs.). If needed, please order the products per bag. 0 0 DF-19S-C(**) -00- ** DF-S-C(**) -00- ** DF-S-C(**) -00-9 ** DF-S-C(**) -00-1 ** DF-S-C(**) -00- ** DF-S-C(**) -00- ** DF-S-C(**) -00-0 ** No. of Contacts 09 [Specific No.] (* *), * * () : Tin plated, Tube packaging () : Gold plated, Tube packaging A B RoHS 0 Note1 : The product's contact number indicated +0.1 Board Through-hole Diameter : Ø0.8 +0 Unit: mm No. of Contacts A B Tube Package Quantity RoHS No. of Contacts A B Tube Package Quantity RoHS DF-S-DSA(**) -008- ** 0 80 pieces DF- 9S-DSA(**) -00-1 ** 09 pieces DF-S-DSA(**) -009-9 ** 0 0 DF-S-DSA(**) -00- ** 1 DF-S-DSA(**) -000-8 ** 8 DF-S-DSA(**) -00- ** DF-S-DSA(**) -001-0 ** 0 DF-S-DSA(**) -008-0 ** DF-S-DSA(**) -00- ** DF-S-DSA(**) -009- ** 1 DF-S-DSA(**) -00- ** 0 DF-S-DSA(**) -00-1 ** 0 DF-8S-DSA(**) -00-9 ** 8 DF-S-DSA(**) -01- ** Note : Please order the tube packaging at the multiplied tube packaging quantity (pieces). B
Straight Pin Header +0.1 Board Through-hole Diameter: Ø0.8 +0 +0.0 Kink Pre-fixed Effective Diameter: Ø0.8 +0 Tin Plating Gold Plating DFA- P-DSA -0-0 DF- P-DSA(01) -001-01 DFA- P-DSA -0- DF- P-DSA(01) -00-01 DFA- P-DSA -0- DF- P-DSA(01) -0019-8 01 DFA- P-DSA -08-8 DF- P-DSA(01) -00-01 DFA- P-DSA -09-0 DF- P-DSA(01) -001-0 01 DFA- P-DSA -010-0 DF- P-DSA(01) -00-01 DFA- 8P-DSA -011- DF- 8P-DSA(01) -00-01 DFA- 9P-DSA -01- DF- 9P-DSA(01) -00-8 01 DFA-P-DSA -01-8 DF-P-DSA(01) -00-0 01 DFA-P-DSA -01-0 DF-P-DSA(01) -00-01 DFA-P-DSA -01- DF-P-DSA(01) -00-01 DFA-P-DSA -01- DF-P-DSA(01) -00-9 01 DFA-P-DSA -01-9 DF-P-DSA(01) -009-1 01 DFA-P-DSA -018-1 DF-P-DSA(01) -000-0 01 Note : The quantity for delivery is determined per bag (0 pcs.). If needed, please order the products per bag. Right Angle Pin Header Board Through-hole Diameter: Ø0.8+0 +0.1 +0.0 Kink Pre-fixed Effective Diameter: Ø0.8 +0 No. of Contacts 8 9 A 0 B 0 0 RoHS Tin Plating Gold Plating DFA- P-DS -019- DF- P-DS(01) -001-01 DFA- P-DS -00- DF -P-DS(01) -00-01 DFA- P-DS -01- DF- P-DS(01) -00-9 01 DFA- P-DS -0-9 DF- P-DS(01) -00-1 01 DFA- P-DS -0-1 DF- P-DS(01) -00-01 DFA- P-DS -0- DF- P-DS(01) -00-01 DFA- 8P-DS -0- DF- 8P-DS(01) -00-0 01 DFA- 9P-DS -0-0 DF- 9P-DS(01) -008-01 DFA-P-DS -0- DF-P-DS(01) -009-01 DFA-P-DS -08- DF-P-DS(01) -000-01 DFA-P-DS -09-8 DF-P-DS(01) -001-01 DFA-P-DS -0190- DF-P-DS(01) -00-0 01 DFA-P-DS -0191-0 DF-P-DS(01) -00-01 DFA-P-DS -019- DF-P-DS(01) -00-01 Note : The quantity for delivery is determined per bag(0pcs.). If needed, please order the products per bag. No. of Contacts 8 9 0 A B RoHS 0 0 B
Straight Pin Header (SMT) 1. P= A... Number of Contacts B BPCB mounting pattern C Note : If a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-8P-V(**) DFEA-9P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**).9 HRS marking (0.) No. of Contacts [Specific No.] (* *), * * (1) : Tin plated packaging (1) : Gold plated packaging C RoHS........... 0... Note1 : Please order the emboss packaging product by the reel number. (1 reel : 00pcs.) 8 9 Cavity No. A 0 0 B........... 0... 1. Configuration of to position Cavity No. HRS marking B
Right Angle Pin Header (SMT) P= A.. 1 Number of Contacts 1. B BPCB mounting pattern DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-8P-H(**) DFEA-9P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**).9. 1. -09-0 ** -00-0 ** -01-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -08-0 ** -09-0 ** -00-0 ** -01-0 ** -0-0 ** No. of Contacts 8 9 Note1 : Please order the emboss packaging product by the reel number. (1reel : 00pcs.) (0.) HRS marking A 0 0 Cavity No. B........... 0... [Specific No.] (* *), * * (1) : Tin plated embossed packaging (1) : Gold plated embossded packaging C RoHS........... 0... Configuration of to position Cavity No. HRS marking B
In-line Plug Photo: Contact inserted status No. of Contacts A B RoHS No. of Contacts A B RoHS DF- EP-C -0-0 DF- 9EP-C -001-8 09 DF- EP-C -0-0 DF-EP-C -00-0 DF- EP-C -0-8 DF-EP-C -00- DF- EP-C -0-0 DF-EP-C -00- DF- EP-C -08- DF-EP-C -00-9 DF- EP-C -09- DF-EP-C -00-1 0 DF- 8EP-C -000-8 DF-EP-C -00- Note : The specific No."None" item is delivered per bag (0pcs.). Please order products per bag unit. In-line Plug with Panel Lock Photo: Contact insertion status BPanel Cutouts No. of Contacts A B C D E RoHS DFAA- EP-C DFAA- EP-C DFAA- EP-C DFAA- EP-C DFAA- EP-C DFAA- EP-C -01- -0-8 -0-0 -0- -0- -0-9 1 19 1 0 0 9.... 1. 19.. 8..... Note1 : Applicable panel thickness is 1. to 1.0mm. (However, a slight backlash is considered for the thickness other than 1. and 1.mm.) Note : Use the non-radius surface at DFAA- 8EP-C -0-1 8 1.. the hooking panel edge. DFAA- 9EP-C -08-9.. Note : Contact No. indicates 1,, 8, DFAA-EP-C DFAA-EP-C DFAA-EP-C DFAA-EP-C DFAA-EP-C DFAA-EP-C -09- -00- -01-9 -0-1 -0- -0-9 1 0.. 9. 1....... 0.., and. Note : The specific No. "None" item is delivered per bag (0pcs.). Please order products per bag unit. B
In-line Adapter with Panel Lock BPanel Cutouts Adapter to in-line by pushing pcs. of socket from both sides No.1-No.1 connection circuit type DF- EP-A DF- EP-A DF- EP-A DF- EP-A DF- EP-A DF- EP-A DF- 8EP-A DF- 9EP-A DF-EP-A DF-EP-A DF-EP-A DF-EP-A DF-EP-A DF-EP-A -0-0 -08- -09- -00- -01- -0-0 -0- -0- -0-8 -0-0 -0- -08- -09-9 -00-8 No. of Contacts 8 9 A B C D E RoHS 0 9.. 0. 8... 1.. 19 1.. 1 19.. 1...... 9.. 1 9.. 1.. 0. 0... Note : The specific No. "None" item is delivered per bag (0pcs.). Please order products per bag unit. Note1 : Applicable panel thickness is 1. to 1.0mm.(However,backlash will occur except for 1., 1.mm thickness.) Note : Please use the non-radius surface at the hooking panel edge. B
Crimping Contact for Socket DF-SCF DF-SC DF-SCFC DF-SCC DF-SCF DF-SC DF-SCFC -00-0 DF-SCC Crimping Contact for In-line Plug -0- -0- -1-0 -- -0001- -000- -00- ULstyle 1 1 1 1 0 1 0 0 1 0 Jacket Diameter 1.-1. 1. 1.-1. 1. 0. to 1. 1. 1. 1. 0. to 1. 1. 1. 1. Applicable Cable Wire Size AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG Stranded Wire Conductor 1/0. 1/0. 1/0. 1/0. /0. /0. /0. /0. /0. /0. /0. /0. /0. /0. /0. /0. Packaging,000/reel 0/pack,000/reel 0/pack,000/reel 0/pack,000/reel 0/pack Finish Tin plated Gold plated Tin plated Gold plated Note1 : Crimping contact Extraction Tool DF-C-PO(A) Note : Applicable wire with tin plated solid soft conductor. Note : When using other than the recommended wire, contact your nearest Hirose representative. DF-EPPCF DF-EPPC DF-EPPCFA DF-EPPCA -0- Applicable Cable ULstyle Jacket Diameter Wire Size Stranded Wire Conductor AWG /0. 0 0. 1. AWG /0. 1 AWG /0. -0-0 0 1. 1. 1. AWG AWG AWG /0. /0. /0. -09- AWG /0. 0 0. 1. AWG /0. 1 AWG /0. -00-0 1. 1. 1. AWG AWG AWG /0. /0. /0. Packaging,000/reel 0/pack,000/reel 0/pack Finish Tin plated Gold plated Note1 : Crimping contact Extraction Tool DF-C-PO(B) Note : Applicable wire with tin plated solid soft conductor. Note : When using other than the recommended wire, contact your nearest Hirose representative. RoHS RoHS BApplicable Crimping Tool Applicator Press Unit Type Hand Crimping Tool Extraction Tool AP-DF-S AP-DF-S AP-DF-EPP CM-C DF-TAHC DFEP-TAHC DF-TAHC DF-C-PO (A) 901-0- 901-9- 901-- 901-0001-0 0-0- 0-0- 0-0- 0-010-8 Applicable Contact DF-SCF/SCFC DF-SCF/SCFC DF-EPPCF/PCFA DF-SC/SCC DF-EPPC/PCA DF-SC/SCFC DF-****SC(F)(C) DF-EP****PC(F)(A) Note1 : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble. Note : Please follow the "Crimping quality standards" and "Table of crimping condition" when crimping contacts. B
Crimped contacts with cable assemblies Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. 1 DF-SF DF-SCF Wire Type UL0 Applicable wire size AWG DF-S - A 9-00 1 Crimped condition / Terminal treatment A Both-end crimped B Single-end crimped / Without terminal treatment S Single-end crimped / With terminal treatment Terminal treatment : Stripped jacket DF-S-A9-00(0) -9001-0 0 Packaging 0pcs/pack Finish Tin plated Note1 : Bag packaging (0pcs/pack). Order by number of packs. Note : Please contact our sales representative when using the other specifications. Wire color 9 White 0 Black Wire length 00 00mm B1
BEmbossed Carrier Tape Dimensions Straight Pin Header 1. +0.0 0 0. 1. +0.1 0 R0. 1. +0.1 0 0.1 Product Type Size No. of Contacts A B C D DFEA-*P-V(**) 0.1 0.1 Right Angle Pin Header ±0.1 Ø1. 0 +0.1 E E 1. 0.1 C 0.1 ±0.1 ±0.1 E 1.±0.1 C±0.1 B±0.1 A±0. B 0.1 A 0. 0. 0.1 to to 8 to to E E E-E. 0. 1. 0..0.0.0.0 ±0. 0.. 0.. Carrier hole +0.1 (Ø1. 0 ) far side 0. 1 0.8 Carrier hole +0.1 (Ø1. 0 ) far side ر0. 0 (D+) MAX.... Ø0± Ø80 ( 80 ) D + 0.... Unreeling direction E +0.1 1. 0 R0. 0. 1. +0.01 0 0.±0.1.1±0. 1.±0. D + 0 (D+)MAX Product Type Size No. of Contacts A B C D to.0.. DFEA-*P-H(**) to.0... 8 to.0 0... to.0... B
BPrecautions 1. Recommended Temperature Profile (SMT) 0 0 secmax MAX 0 TEMPERATURE 0 0 0 0 0 TIME (sec) 90 0sec 0secMAX PRE-HEATING TIME SOLDERING TIME [Applicable Conditions] 1.Peak temperature : a maximum of 0ç for no more than seconds.heating unit : no less than 0ç for no more than 0 seconds.preheating unit : 0 to 0ç for 90 to 0 seconds.number of times : no more than times * Measurement is conducted at the contact lead part As it may change depending on the conditions such as solder paste types, manufacturers, PCB size, and other soldering materials, please fully check the mounting conditions before use. (Note 1) This temperature profile is a recommended value.. Recommended Manual Soldering Condition (SMT) Soldering iron temperature : 90±ç, Soldering time: Within seconds. Recommended Screen Thickness (SMT) 0. to 0.mm. Board Warpage (SMT) Based on both connector edges, 0.0mm max. in the connector center portion Flow Condition with Automatic Soldering Tool. Soldering temperature : 0±ç, Soldering time : Within seconds. Recommended Soldering Condition (DIP) Manual Soldering Condition. Soldering iron temperature : 90±ç, Soldering time : Within seconds. Cleaning Condition Refer to the "Wire-to-Board Connector Use Hand book". IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change the push/pull feeling etc. Please contact us when you use other cleaning agents. ). Connection Condition Refer to the "Wire-to-Board Connector Use Hand book". 8. Precations Refer to the "Wire-to-Board Connector Use Hand book". B19
Powered by TCPDF (www.tcpdf.org) DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) B0