Saws for cutting wood, aluminum metal and plastics ISHAD saw blades are manufactured with the best raw materials available today. THE STEEL BODY: The high quality steel plate is manufactured with special emphasis on even thickness and absolute accuracy in centering the middle bore. TENSION RING: A tension ring adds to the working stability resisting further side force, thus ensuring excellent accuracy and performance. THE BLADE BALANCING AND LEVELING: Each saw is carefully balanced to avoid vibration ensuring side force is reduced, providing clean chip free cuts. NOISE REDUCTION: The combination of the lazer cut expansion grooves and hairline lazer cuts further prevents vibration and reduces noise significantly. CARBIDE SUPER HIGH-DENSITY CARBIDE : Super high-density carbide teeth coupled with a new Nano-Grain unique bond will result in clean cuts for a longer time. OUR TECHNOLOGY INNOVATIVE PRECISION CARBIDE GRINDING: Our R&D team has developed special tooling to reach a ground breaking form of grinding of the carbide teeth. The unique new profile, cleans debris faster from the tip, delivering better chip-free cuts, time after time, for a longer working life. QUALITY CONTROL ISHAD s Quality Control is carried out using the most advanced machinery, sophisticated computerized equipment and flexible job lot management to attain the high standards required by customers around the world.
Optimus ISHAD introduces their latest inn
ovation in saw blade technology. The New Generation of s 4X Cutting Power The ground-breaking grinding technique of the carbide tipped saw blade is now available with the introduction of the 4X OPTIMUS. The NEW saw blade has proved to have significant longer life, resulting in improved production and increased profitability. In tests conducted at a leading furniture manufacturer in Israel, the following results were achieved: PARAMETER/ STANDARD 4X OPTIMUS (hard teeth) (ISHAD) 0-96T- - 0-96T-- TCG FEED RATIO CUTTING MATERIAL Manual Melamine, coated Formica WORK FORM CUTTING LIFE without scoring 1 day without scoring 4 days PARAMETER/ STANDARD 4X OPTIMUS (hard teeth) (ISHAD) 0-96T- - TCG 0-96T-- TCG FEED RATIO CUTTING MATERIAL Manual Melamine, coated Formica, various MDF WORK FORM CUTTING LIFE with scoring 3 days with scoring 9 days PARAMETER/ STANDARD (hard teeth) -T-- TCG MACHINE FEED RATIO CUTTING MATERIAL WORK FORM with scoring CUTTING LIFE 2 days 4X OPTIMUS (ISHAD) -T-- TCG (Bridge Saw) Automatic Melamine, Formica, MDF, Hardboard with scoring 4 days
Contents: Item name AT 1001 AT 1001-1 AT 1001-2 AT 1006 AT 1006-1 AT 1006-2 ATB 2001 ATB 01 ATB 0 ATB 1 ATB 2006 ATB 06 ATBN 00 ATBN 1-1 TCG 02 TCG 3 TCG 3-4 TCG 4 TCG 07 TCGN 03 TCGP 01 TCGN 08 HGP 4010 HGN 4010-1 COM 4011 MCK 4012 SC 8 LAMELO MTS 4012 DA 4015 NF 6 MFM 7 Description Recommended Cutting Speed Rip saw balde Heavy duty rip saw blade Heavy duty rip saw blade Heavy duty rip saw blade Heavy duty rip saw blade Heavy duty rip saw blade Trimming & cross cut saw blade Trimming & cross cut saw blade Trimming & cross cut saw blade Trimming & cross cut saw blade Panel sizing saw blade Trimming & cross cut thin kerf Trimming & sizing saw blade Cross cut saw blade Trimming & sizing saw blade Trimming & sizing saw blade Trimming & sizing saw blade Panel sizing saw blade Trimming & cross cut thin kerf Trimming & sizing saw blade Trimming & sizing saw blade Plastic Trimming & sizing saw Trimming & sizing saw blade Trimming & sizing saw blade Combination cut saw blade Scoring saw blade Scoring saw blade Cutter for joining plate Grooving saw 4mm-13mm Grooving saw blade Non ferrous metal saw blade T.C.T Metal saw blade Page no. 7 8 9 10 11 12 13 14 15 16 17 18-19 20 21 22 23 25 26-27 28 29 31 32 33 34 35-36 37 38 39 40 41 42 6
7 Recommended Cutting Speed
AT-1001 Rip Flat teeth. Wide radius gullet for easy chip removal. Along the grain of soft and hard wood. Soft fiber and stone fiber boards. 410 200 14 411 20 412 413 0 414 0 415 28 416 32 417 450 32 4.0 418 500 36 8
Heavy Duty Rip AT-1001-1 Flat teeth. Wide radius gullet for easy chip removal. Along the grain of soft and hard wood. Soft fiber and stone fiber boards. 410-1 0 4.0 411-1 0 412-1 28 4.0 413-1 28 414-1 32 4.0 415-1 32 9
AT-1001-2 Heavy Duty Rip Flat teeth. Wide radius gullet for easy chip removal. With carbide chip clearance rakes. Along the grain of soft and hard wood. Soft fiber and stone fiber boards. 437 18 (2+2) 438 0 20 (2+2) 439 (2+2) 10
Heavy Duty Rip AT-1006 Flat teeth. Wide radius gullet for easy chip removal. Cooling slots in the saw body prevent excessive heat build up. Along the grain of soft and hard wood. Solid, soft and hard wood, with knots 419 20 420 421 0 14 422 0 423 0 28 4 16 425 28 426 32 427 18 428 28 429 450 40 4.0 4 500 44 11
AT-1006-1 Heavy Duty Rip Flat teeth. Wide radius gullet for easy chip removal. Cooling slots in the saw body prevent excessive heat build up. Along the grain of soft and hard wood. Soft fiber and stone fiber boards. 431 0 3.8 432 0 433 28 4.0 434 28 435 32 4.0 436 32 12
Heavy Duty Rip AT-1006-2 Flat teeth. Wide radius gullet for easy chip removal. Along the grain of soft and hard wood. Soft fiber and stone fiber boards. With carbide chip clearance rakes. 440 0 20 (2+2) 2.4 3.8 441 (2+2) 13
ATB-2001 Trimming & Cross cut Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. 444 449 452 456 459 500 504 507 508 511 514 515 518 521 522 526 527 529 5 533 534 537 538 542 547 751 755 759 125 140 150 1 165 170 180 190 190 200 210 210 216 220 220 2 2 235 235 0 0 0 450 500 18 36 34 34 34 40 40 40 54 66 ` 4.0 14
Trimming & Cross cut ATB-01 Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. ` 446 451 455 458 502 506 513 517 520 5 528 532 535 540 545 550 753 757 7 125 140 150 1 170 180 200 210 216 220 2 235 0 0 450 500 40 58 64 64 64 64 80 96 108 120 132 120 4.0 15
ATB-0 Trimming & Cross cut Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. ` 503 505 510 525 536 541 546 750 754 758 180 180 200 2 0 450 500 42 36 42 54 4.0 16
Trimming & Cross cut ATB-1 Alternate top bevel teeth. Soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. ` 445 450 453 454 457 501 509 512 516 519 523 531 539 543 544 5 549 752 125 140 150 150 1 170 190 200 210 216 220 235 0 0 36 36 36 84 96 17
ATB-2006 Trimming & Cross cut Alternate top bevel teeth. Panel material with plastic lamination or not, hardboard, chipboard and plywood. ` 7 5 8 320 65 9 355 54 75 610 355 611 355 75 611-1 612 613 613-1 614 355 355 380 380 75 80 (4/19/100+ 2/14/110) (2/14/100) 80 (4/19/120+ 2/9/1) 75 4.25 615 616 (2/14/100) 18
Trimming & Cross cut ATB-2006 Alternate top bevel teeth. Panel material with plastic lamination or not, hardboard, chipboard and plywood. ` 617 80 ) 4/9/100( 618 619 620 621 622 623 6 625 420 4 450 450 500 500 520 0 + 2/14/125( ) 2/10/80 75 ) 4/15/105( 80 + 4/19/120( ) 2/9/1 ) 2/11/115( + 2/11/115( ) 2/19/120 + 2/9/120( ) 2/11/115 4.8 4.8 4.8 4.8 4.8 4.8 19
ATB-06 Trimming & Cross cut Thin Kerf Alternate top bevel teeth. Thin kerf. soft, hard and exotic wood- along and crosscut the grain. Veneers, plywood and boards veneered on both sides, hard boards, MDF, chipboard with plastic laminate on one side. ` 583 150 584 150 586 180 587 180 58 589 200 34 590 200 64 592 2 34 593 40 594 80 595 100 598 0 599 0 96 1 54 2 108 5 380 110 2.7 20
Trimming & Sizing ATBN-00 Alternate top bevel teeth 2-32º. Negative hook. Specially designed for particle boards with plastic lamination on both sides. Extra fine cut. ` 676 200-6º 3 676-1 200 64-6º 3 677 220 64-6º 3 678 80-6º 2.4 679 0 96-6º 679-1 0 96-6º 680 3 102-6º 681 108-6º 3.3 682 120-6º 3.3 21
ATBN-1/1 Cross cut Alternate top bevel teeth 2-32º. Negative hook. Soft and hard wood, particle boards. Without grabbing! Using for overarm machines. ` 683-1 220 0º 684-2º 2.4 684-1 0º 2.4 685 0 36-2º 3.8 686 42-2º 4.2 687-2º 4.2 687-1 500 54-2º 4.2 22
Trimming & Sizing TCG-02 Triple chip grind teeth. Soft and hard wood, along and across the gain. Plywood, veneer, laminate panels, boards. Specially smooth finishing in boards laminate on both sides. 762 125 40 763 140 765 150 767 1 769 170 771 180 58 774 200 64 775 210 64 777 216 780 220 64 782 2 561 235 563 0 64 566 80 570 0 96 574 108 577 120 580 450 132 4.0 23
TCG-3 Trimming & Sizing Triple chip grind teeth. Soft and hard wood, along and across the gain. Plywood, veneer, laminate panels, boards. 761 125 764 150 766 1 36 768 170 36 770 180 40 7 190 773 200 776 216 5 235 562 0 565 568 0 569 0 5 573 84 576 96 579 450 108 4.0 582 500 120
Trimming & Sizing TGC-3-4 Triple chip grind teeth. Soft and hard wood, along and across the gain. Plywood, veneer, laminate panels, boards. 778 220 34 781 2 40 783 235 40 564 40 567 0 571 54 575 578 450 66 4.0 581 500 25
TCG-4 Panel Sizing Triple chip grind teeth. Panel material with plastic lamination on both sides or not, chipboard, plywood and all other boards. Used for panel sizing and diving. 633 5 65 633-1 320 634 355 54 635 355 54 75 635-1 355 75 4.25 636 355 637 638 639 639-1 640 641 642 355 355 380 380 75 80 + 4/19/100( ) 2/14/110 ) 2/14/100( 80 + 4/19/120( ) 2/9/1 ) 2/14/100( 75 7 4.8 4.8 643 ) 4/9/100( 80 26
Panel Sizing TGC-4 Triple chip grind teeth. Panel material with plastic lamination on both sides or not, chipboard, plywood and all other boards. Used for panel sizing and diving. 644 645 646 647 6 649 650 651 420 4 450 450 500 500 500 0 + 2/14/125( ) 2/10/80 75 ) 4/15/105( 80 + 4/19/120( ) 2/9/1 ) 2/11/115( + 2/11/115( ) 2/19/120 + 2/9/120( ) 2/11/115 4.8 4.8 4.8 4.8 4.8 4.8 27
TCG-07 Trimming & Cross cut Thin Kerf Triple chip grind teeth. Thin kerf. soft, hard and exotic wood- along and crosscut the grain. Plywood, hard boards and boards with plastic or veneer laminations on both side along and across. 585 150 588 180 58 591 200 64 596 80 597 100 0 0 96 3 108 6 380 100 2.7 28
Trimming & Cross cut Thin Kerf TGCN-03 Triple chip grind teeth. Negative hook. Soft and hard wood, particle boards laminate on both sides. Without grabbing! Using for overarm machines. 689 0º 2.4 690 0 84 0º 2.4 691 96 0º 692 108 0º 3.6 29
TCGP-01 Trimming & Cross cut Thin Kerf Alternate top bevel teeth. 4 edge brake grind teeth. Soft and hard wood. Particle boards laminate on both sides. For extra fine cut. 8 200 64 2.9 831 80 5 2.9 832 0 96 2.9 833 3 102 834 108
Plastic Trimming & Sizing TCGN-08 Triple chip grind teeth. Negative hook. Specially for plastic and profiles, without melting or chipping. 693 80-2º 694 0 96-2º 3.3 695 108-2º 3.7 31
HGP-4010 Trimming & Sizing Hollow-ground and reversed V-ground teeth. For panel materials with veneer or plastic lamination on both sides or not. Used in saw benches where the scoring unit is NOT in used, or vertical panel sizing saws. Extra fine finish in laminates. 673 220 42 674 253 675 3 32
Trimming & Sizing HGN-4010/1 Hollow-ground and reversed V-ground teeth. For panel materials with veneer or plastic lamination on both sides or not. Used in saw benches where the scoring unit is NOT in used, or vertical panel sizing saws. Extra fine finish in laminates. 673-1 220 42-6º 674-1 253-6º 675-1 3-6º 33
COM-4011 Combination Cut Alternate top bevel teeth with Raker. 4 alternate with 1 Raker. An excellent all around saw, ideally suite where one saw is used for all different types of cutting. For ripping or crosscutting solid, board, plywood or laminate. Fine finish for all kind of wood. 659 200 40 6 2 40 661 40 662 50 663 0 3.8 664 70 3.8 665 80 4.0 34
Scoring MCK-4012 Alternate top bevel teeth. Conical teeth. Kerf- Adjustable to the main circular saw blade. Depend on the main circular saw blade. Scoring with the feed. 1 100 20 20/22-4.0 2 100 20 20/22 4.0-5.0 3 120 20/22-3.6 4 120 20/22-4.2 5 120 20/22-4.5 6 120 20/22 3.8-4.8 7 120 20/22 4.0-5.0 8 120 20/22-5.4 9 125 20-5.4 7 125 45-5.4 35
MCK-4012 Scoring Alternate top bevel teeth. Conical teeth. Kerf- Adjustable to the main circular saw blade. Depend on the main circular saw blade. Scoring with the feed. 731 732 733 734 150 1 1 180 20 45 ) 3/11/70( 55 ) 5/3/66( 20-5.4-5.4-5.4-5.4 735 180 45-5.4 736 180 55 4.8-5.8 737 200 36 20-5.4 738 739 740 741 742 200 200 200 216 0 36 36 36 36 45 65 ) 2/9/110( 65 ) 2/9/110( 50 ) 3/15/80( 45-5.4-5.4 4.8-5.8-5.4-5.4 743 340 45-5.4 36
Scoring SC-8 Saw left- Left top bevel teeth. Saw right- Right top bevel teeth. Kerf- Adjustable to the main circular saw blade by means of shims. Depend on the main circular saw blade. Scoring with the feed. 749 100 22 / 20-3.6 749-1 120 22 / 20-3.6 749-2 125 22 / 20-3.6 37
LAMELO Cutter for Joining Plate Flat teeth. The width of the cutter is suited to the original lamello joint plates. The size of the lamello joint plates determine the depth of the penetration. Soft and hard wood. Cutter for joining lamello. 840 100 6 20 or 22 4.0 841 100 12 20 or 22 12º 4.0 38
Grooring Saw mm-1mm MTS-4014 CUSTOM Can be supplied with all king of grinding. Kerf- mm up to 1mm. Can be supplied with wide radius gullet for easy ship removal. For working along and across the grain. 39
DA-4015 Grooring Saw-1. 4 Left top bevel teeth, 1 flat teeth. 2. 4 Right top bevel teeth, 1 flat teeth. Chipper Blades- Flat teeth. Can be used to cut either with or against grain. Recommended for plywood, melamine or where extra smooth cut is needed. 820 " 6 18 5/8 1/4"to 13-16" 821 " 8 5/8 0º 1/4"to 13-16" 822 " 8 1 0º 1/4"to 13-16" 823 " 8 40 5/8-1/4"to 13-16" 8 " 8 40 1-1/4"to 13-16" 825 " 10 5/8 1/4"to 13-16" 826 " 10 1 1/4"to 13-16" 827 " 12 1 1/4"to 13-16" 40
Non Ferrous Metal NF-6 Triple chip grind teeth. Negative hook. For thin-walled profiles of aluminum. Suitable for sizing and miter cuts in ferrous metals such as aluminum and aluminum alloys. 697 698 699 700 701 702 703 704 705 706 707 707-1 708 709 710 711 712 713 714 715 716 717 718 719 0 0-1 1 180 200 200 216 2 235 275 280 0 0 3 3 380 420 450 450 500 550 58 64 80 100 80 96 80 102 84 108 100 96 120 96 108 120 120 150 /32 /32 /32 /32 /32 32/40 /32/40 40/50 40/50 40/50 40/50 - - - - - - - - - - - - - - - - - - - - - - - - - - 3.8 3.8 3.8 3.8 4.0 3.8 3.8 4.5 4.5 41
MFM-7 T.C.T Metal Saw Special alternate bevel grind teeth. Using in dry cutting For steel pipes, profiles, bars aluminum profiles and PVC pipes. Fast cutting. No sparks! Clean surface (without burning). 808 180 36 20 0º 809 180 " 8 / 5 0º 809-1 203 40 " 8 / 5 0º 810 255 50 " 8 / 5 0º 811 5 " 1 0º 812 5 80 " 1 0º 813 355 " 1 0º 813-1 355 90 " 1 0º 42