VF100C Bullseye Series - 8121C Trim ROUND ADJUSTABLE ACCENT DOWNLIGHT 1-LIGHT TRIMMED LED MEDIUM PROJECT 8121C Measurements in ( ) are metric equivalents. TYPE CATALOG NUMBER ROUND GIMBAL ADJUSTABLE TRIMMED ACCENT - VF100 Series recessed downlight and housing configurations represent the pinnacle of innovation for the architectural industry. These fixtures meet and exceed the needs of today s lighting designers and specifiers for small recessed fixtures that perform. REPLACES GIMBALO Safety cable 360 Lockable horizontal rotation 45 x 45 Locking vertical tilt aiming TRIM ORDERING INFO 5.00 (127) Ø5.50 (140) TRIM SERIES CREE CRI / COLOR BEAM TRIM FINISH 8121C BULLSEYE SERIES 5.50 ROUND Trimmed Accent Adjustable Downlight 19C 26C 8027 8030 8035 8040 9227 9230 9235 9240 9827 9830 9835 9840 N Narrow M Medium W Wide Specifications ROUND DOWNLIGHT Recessed gimbal adjustable downlight 5.50 round die-cast aluminum trim.25 face trim Lockable double gimbal assembly Accepts up to 2 or more optical accessories Easy trim snap in spring retainers Safety cable included Powder coat finish MB Black MW White XX Custom Example: 8121C-19C-9227-N-MW LED Performance Chart WATTAGE / LUMENS CRI / COLOR BEAM Limited C US 19C 19W LED / 2163lm del. 26C 26W LED / 2908lm del. Delivered Lumens @ 80CRI / 3000K Narrow Beam 8027 80CRI / 2700K 8030 80CRI / 3000K 8035 80CRI / 3500K 8040 80CRI / 4000K 9227 92CRI / 2700K 9230 92CRI / 3000K 9235 92CRI / 3500K 9240 92CRI / 4000K 9827 98CRI / 2700K 9830 98CRI / 3000K 9835 98CRI / 3500K 9840 98CRI / 4000K N Narrow 14 M Medium 30 W Wide 40 V Very Wide 70 PAGE 1
VF100C Trimmed Housings ROUND RECESSED DOWNLIGHT Measurements in ( ) are metric equivalents. Butterfly Bracket 9.72 (247) Tie down Tabs 6.15 (156) 7.15 (182) Adjustable Plaster Frame Accommodates 1/2, 5/8, 3/4 & 1.0 Ceiling Thickness Ø5.00 (127) 12.33 (313) Integral Power Supply & Wiring Compartment Specifications (VFR-1CN-T) (VFR-1CA-T) MEDIUM SIZED HOUSING ROUND TRIMMED HOUSING Housing of all steel construction Adjustable plaster frame Black powder coat finish Ceiling Cut-out - Ø5.13 ELECTRICAL Field-replaceable integral LED driver Electrical wiring compartment integrated into housing construction Internal thermal protection Easy maintenance access through ceiling opening Rated for through-branch wiring Optional dimming HOUSING ORDERING INFO MOUNTING Butterfly brackets for commercial installation in drywall, wood, stone, acoustic tile, or other ceiling types Perforated plate adjusts for 1/2, 5/8, 3/4 & 1.0 ceiling thickness Includes Heavy-Duty L-Bars hanger bar system for residential installation LABELS Suitable for damp location Air-Tight / IC Optional SERIES CREE DRIVER FINISH OPTIONS VFR-1CN-T 19C 19W LED Leave Blank for Medium Round Trimmed 26C 26W LED Black New Construction Housing VFR-1CA-T* Medium Round Trimmed Air-Tight Housing Black finish is standard DMU Dimming Multiple Forward/Reverse Phase (@ 120V only) 0-10V Wires Present (@ 120-277V) D31 Lutron Hi-lume Forward Phase 1% (@ 120V only) DEU Lutron Hi-lume EcoSystem 1% with Soft-On, Fade-to-Black (@ 120-277V only) DPU* Lutron Hi-lume Premier 0.1% with Soft-On, Fade-to-Black (@ 120-277V only) * 19C Only WW White Limited C US IC* Insulated Ceiling (VFR-1CA-T only) IC / Air-Tight For Emergency LED Inverter Options See Page 5 CAL TIT Ordering Example: VFR-1CN-T-19C-DMU-WW-IC PAGE 2
OPTICAL ACCESSORY DESCRIPTION OPTICAL ACCESSORIES VF100 C SIZE BULLSEYE SERIES LIGHT SOURCE MEDIUM PAR20 PAR20CMH T4GU6.5 70mm LED Clear Lens OPTCN-CLR UV Lens OPTCN-UVL Hex Cell Louver Diffusion Lens Diffusion Lens - LED Film Linear Spread Lens Linear Spread Lens - LED Film OPTCN-HXL OPTCN-DFL OPTCN-L-DFL OPTCN-LSL OPTCN-L-LSL Prismatic Spread Lens Snoot - Black Snoot - White Snoot - Silver Snoot - White With Black Splay Snoot - Silver With Black Splay Narrow Beam 14 Medium Beam 30 Wide Beam 40 Very Wide 70 OPTCN-PSL OPTCN-SNB OPTCN-SNW OPTCN-SNS OPTCN-SNWB OPTCN-SNSB OPTCN-REFLN OPTCN-REFLM OPTCN-REFLW OPTCN-REFLV * Other filters, colored glass, dichroics & micro-lenses available upon request PAGE 3
L-Bars FEATURE OVERVIEW L-shaped cross section for each member, when assembled together provides a ½ X 1 ½ C-Channel shaped profile for superior rigidity. Ordered separately for MF100, MF150, MF300, MF350, MF400, Iride, Moli, & Multiquadro Consists of two identical parts in all aspects, therefore interchangeable. Fits into C-Channel notches in Butterfly Bracket. Item #LBARS4PK - 4 pack of bars included (Good for 1 fixture). For 12 joist spacing, (Included with Bullseye, VF100, VF150, VF300 New Construction & IC Housings) 1 Cut to relief hole Not compatible with VF100 Max-A & Remodel Housings 2 Optional: To lock, pry arrowhead outward or push in Auxiliary nailing hole Slot to allow upper tab to deflect Marking lines for 12, 16 & 24 joist spacing & 24 T-bar, allow locking before affixing to ceiling Fastenerless bar hanger extension lock, accessible from side or bottom. Using pliers, twist until vertical T-bar slot Five-feature integral nail * Tabs for joist positioning The parts are assembled by aligning the end of one, with the alignment marks of the other. 10-24 Optional T-bar locking hole, for #8 self-tapping screw ** Alignment marks for easy assembly * 1. 2. 3. 4. 5. Contains integral nails, which are: Located as far away as possible from the main bar to permit easy nailing. Oriented parallel to joist wood grain for easier installation. Toothed to resist pullout. The sharpest available achieved through a proprietary process. Retracted and surrounded for added safety prior to installation 2018Installation LF ILLUMINATION videosllc available at Hole/Slot for nailing to underside of joist. Slot allows up to 5/8 lateral fixture adjustment or removal 48 capacity with addition of 1 or 2 more ** 36 identical members www.triparinc.com/l-bar Tripar 08/2016 Patent Pending PAGE 4 rev: 062118
EMERGENCY INVERTERS LED ELV MLV PROJECT TYPE CATALOG NUMBER The emergency inverter provides full power up to its load rating for no less than 90 minutes as prescribed by UL 924 Listed for US and Canada & CSA C22 No. 141 Unit Equipment for Emergency Lighting. The inverter is installed remotely, behind an access panel or with above ceiling access required (behind grid ceilings are also acceptable). The inverter is not accessible through the fixture opening in the ceiling. The inverters are rated for 120-277V and will work for LED, ELV, MLV, incandescent & fluorescent loads. The inverter is paired for the connected load wattage of the light source(s). 25W If the load rating requirement is 25W (or less) then we recommend LF #EMREM25 IOTA #IIS-25-I: http://www.iotaengineering.com/iis25.htm Instructions: http://iotaengineering.com/inverter/iis25_manual.pdf 35W If the load rating requirement is 25-35W then we recommend LF #EMREM35 IOTA #IIS-35-I: http://iotaengineering.com/inverter/iis35_spec.pdf Instructions: http://iotaengineering.com/inverter/iis35_manual.pdf 50W If the load rating requirement is 35-50W then we recommend LF #EMREM50 IOTA #IIS-50-I: http://iotaengineering.com/inverter/iis50_spec.pdf Instructions: http://iotaengineering.com/inverter/iis50_manual.pdf Consult LF Illumination for higher wattage inverter offerings. PAGE 5 rev: 062118