CZ Micro Switch. Features. Contact Form. Characteristics Dielectric strength Shock. Ambient temperature Humidity

Similar documents
METAL-BODIED LIMIT SWITCHES: SN6 SERIES

High-precision Optical Switch

Limit Switches Selection Guide. SN61 04 SL C Head Styles (see table below) Contact Type. SP: Snap Action. SL: Slow Action

PUSHBUTTON SWITCH / SELECTOR SWITCH / ILLUMINATED PUSHBUTTON SWITCH PSA, LPSA TYPE

B3F. Miniature, Space-saving Switch

Classification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard. SPST-NO (1a) Fully sealed PCB terminal

Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).

Inductive Proximity Sensor

Weekly Timer. ON/OFF and cycle operations up to one week Two SPST-NO time limit contacts with manual override switches

G8HN-J. Specifications. Contact Data. Automotive PCB Relay based on Micro ISO. Features

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:

A W - A 2A R - 24D - 1

E2F. Cylindrical Proximity Sensor in Plastic Housing. Applications. Ordering Information. Sensors. Accessories (Order Separately)

HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton

Solid-State Digital Counter H7AN

MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure

TURQUOISE SWITCHES ABS TYPE

OFF-delay time. 7.5 s. 15 s. 30 s. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category

Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj

HMI Components. Series. Flush design Raised design PCB (with adaptor) Indicator Pushbutton Illuminated pushbutton

G5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend

PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load

Two-way Action Test Button (Models with Lockable Test Button) For Momentary Operation

TRD-N/NH Series Incremental Encoders

Snap Action Switches Technical Guide

TL-W. Standard Flat Inductive Proximity Sensors. Ordering Information. Front and side facing surface IP67 DC 2-wire and DC 3-wire models

Overtravel of 3.5 mm max. Power source DC D5C-1DS0 D5C-1DP0 D5C-1DA0 AC D5C-1AS0 D5C-1AP0 D5C-1AA0 Antenna only D5C-00S0 D5C-00P0 D5C-00A0

Safety Monitoring Relays

Type Sealing Poles Contacts Rated voltage Model Standard Flux-tight 4 poles 3PST-NO, SPST-NC 24 VDC G7SA-3A1B. Type LED indicator Poles Rated voltage

Model Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models

Type Sealing Poles Contacts Rated voltage Model 5PST-NO, SPST-NC 24 VDC *1

MY-GS. Miniature Power Relays. Mechanical Indicators Added as a Standard Feature to Our Bestselling MY General-purpose Relays.

Tactile Switch. Ordering Information. A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical, and High-force.

Classification Terminal Shape Contact form Enclosure rating Model Rated coil voltage

G6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.

HPJSeries HPJ. Ultraminiature Photoelectric Sensors with Self-contained Amplifier

Relays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.

Type Poles Contact configuration Rated voltage Model G7S-4A2B 24 VDC 3PST-NO, 3PST-NC

Enclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI

888-1AC-F-C 888-1AC-F-V 888-1AC-F-S (SPNO) 888-2AC-F-C 888-2AC-F-V 888-2AC-F-S (DPNO) 888N-2AC-F-C 888N-2AC-F-V 888N-2AC-F-S (DPNO)

Tactile Switch. Ordering Information. A Wide Range of Models: 6 6 mm, mm, Side-operated, High-force, and Gold-plated.

2. Terminal Shape P: PCB terminals B: Screw terminals T: Quick-connect terminals (#250 terminal)

High Reliability Of Fiber Optic Amplifier For Convenient Mounting

62 Series - Power relays 16 A. Features / /

DPDT MY2N-D2 MY2IN-D2 --- (DC only) 4PDT MY4N-D2 MY4IN-D PDT (bifurcated) MY4ZN-D2 MY4ZIN-D2 --- With built-in CR

Ultraminiature Photoelectric Switches with Self-contained Amplifier

Technical Information General Purpose Relays

Local control stations for Zone 1 and Zone 21. Features. Description

Type Poles Contact configuration Rated voltage Model 3PST-NO, 3PST-NC 24 VDC

Classification Contact form Contact type Contact material Enclosure Rating Model Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2

Micro-ISO Automotive Relay. (Unit: mm inch)

Inductive Proximity Sensor

TRD-J Series Incremental Encoders

507-1A H - - C. Features. Type List. Ordering Information

800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)

RU Series Universal Relays

Over or Under Current. Over and Under Current Monitor. Current Transducer. Current Indicator. DIN Rail Mounting Current Monitors

Suitable for lighting and motor load, 1 Form A 50A latching relays

Relays & Sockets. RF2V 2-Pole Force Guided Relays/SJ Series Relay Sockets. UL/Recogntion File No. E55996 TÜV SÜD. EU Low Voltage Directive

Model Number Structure

Song Chuan / Relay Catalog 507

OMRON MK-I / -S RELAY

Level Lance Model 5100

Bulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.

Absolute Rotary Encoder

2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1

METAL PASSAGE CONFIRMATION SENSORS

Step relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL

HIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)

Details on the New G2RS

Multifunction Pulse-to-Pneumatic Converter

General-Purpose Photoelectric Sensors with Self-Contained Amplifier

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay

Timers GT3F. GT3F Series True Power OFF Delay Timers. Phone: Fax: Web: -

MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure

Control stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M

Table of Contents. 22mm Push Buttons. 30mm Metal Push Buttons. 22mm Plastic Enclosures, Control Boxes & Installation Instructions 30-35

Capacitive Proximity Sensor

Actuators Series 8602/3

E3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features

Non-Ferrous-Metal-Detecting Proximity Sensor (Separate Amplifier Type)

CSM_G7S-_-E_DS_E_7_1

E2Q5. Square Proximity Sensor. Long Distance Square Inductive Proximity Sensor. Ordering Information

Type Sealing Poles Contact configuration Rated voltage Model. Type LED indicator Poles Rated voltage Model

PCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US

PCB Relay. Contact form Terminal Single-side stable Single-winding latching Double-winding latching

MY-GS CSM_MY-GS_DS_E_2_1

CP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES

No mark Time-limit SPDT (1c) A Time-limit DPDT (2c) B Time-limit SPDT (1c), Instantaneous SPDT (1c) S DIN W48 H48mm.

Class Sealing Fully sealed Contact configuration Rated coil voltage Model Basic Type SPDT 4.5 VDC G6Y-1 5 VDC 9 VDC 12 VDC 24 VDC

SIA, SIB, SIC, SID. User's Manual

E2S World's Smallest Square Sensor with Built-in Amplifier

Supply voltage Output configuration Resolution (P/R) Model 12 to 24 VDC Complementary output 100, 200, 360, 500, or 600 E6F-CWZ5G 1,000

Limit Switch Style Inductive Prox

EAO Product Information. Series 84

Relays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection

2 or 4 pole changeover contact Plug-in/Faston 187

Z4D-F. LED-type Micro Displacement Sensor with Many Features in a Compact Body. Micro Displacement Sensor. Ordering Information.

Transcription:

CZ Micro Switch Features Virous of actuators, the operation position is adjustable. (such as CZ-71). Outer shell covered with intensive plastic, water-proof and oil-proof. The mechanical strength is better than CM type of micro swith, bear hitting. Contact Form NC NO Ratings Rated voltage VAC 20VAC 480VAC 8VDC 14VDC 0VDC VDC 20VDC Noninductive (A) Resistance Lamp Inductive Motor NC NO NC NO NC NO NC NO 8 0. 2. 1.2 0.7 2. 0.0 0.0 Inductive (A) 0.0 0.0 2. 0.7 2. 0.0 0.0 NOTES: 1.Inductive load has a power factor of min.(ac) and a time constant of 7 msec.max.(dc). 2.Lamp load has an inrush current of times the steady-state current,while motor load has an inrush current of times the steady-state current. Characteristics Operation speed 0.mm-0cm/sec Operating frequency Mechanical: 0 operations/minute Electical: 0 operations/minute Contact resistance 1m max. (initial value) Insulation resistance 0m above(at 00VDC) 00VAC, 0/0 HZ for 1 minute between terminals of the same polarity Dielectric strength 0VAC, 0/0 HZ for 1 minute between currentcarrying and non-current-carrying metal parts 0VAC, 0/0 HZ for 1 minute between each terminal and ground Vibration Shock Ambient temperature Humidity Life Weight Degree of protection -HZ,mm double amplitude Mechanical durable: 1, 000m/Sec 2 (about 0G'S) Malfunction: 00m/Sec 2 (about 0G'S) - to + <9% RH Mechanical:,000,000 operations above (under rated OT) Electrical: 00,000 operations above About 0g IP Operating characteristics Models CZ-70 CZ-71 CZ-7 CZ-7 CZ-7 CZ-70 CZ-7140 CZ-71 CZ-7141 CZ-74 CZ-7144 CZ-71 OF Max. 00g 00g 00g 00g 00g g 220g 180g 240g 200g 280g 0g RF Min. 0g 0g 0g 0g 0g 40g 0g 0g 80g 0g 0g PT Max. mm 8.mm.0mm.mm mm.mm 20mm OT Min. 0.8mm.0mm.0mm.0mm.0mm 4.0mm 2.mm.0mm.0mm mm MD Max. 0.8mm 0.8mm 0.8mm 0.8mm 0.8mm.2mm 2.4mm mm 2.4mm mm OP 0. 0.8mm 44 1.2mm 21.8 1.2mm. 1.2mm. 1.2mm 2 1mm 2 1mm40 1mm 40 1mm0 1.2mm0 1.2mm FP mm 2mm 4mm mm 01

CZ Micro Switch CZ-71 CZ-7141 CZ-70 CZ-7140 CZ-74 CZ-7144 CZ-70 CZ-71 CZ-7 CZ-7 CZ-7 CZ-71 02

CM Micro Switch Features Virous of actuators, action position is adjustable(such as CM1701) High switch on and off capacity(1a) High accuracy Wide range of operation speed Each type of CM series has solder terminal, screw terminal and tab terminal are selective Add A for solder terminal, add C for tab terminal, blank for screw terminal Contact Form NC NO Ratings Rated voltage VAC 20VAC 00VAC 8VDC 14VDC 0VDC VDC 20VDC Noninductive (A) Resistance NC NO NC NO 1 1 1 1 (2) 2. Lamp 1.2 0.7 Inductive (A) Inductive NC NO NC NO 1 1 2. 1 0.0 0.0 0.0 0.0 Motor 2. 0.7 Inrush Current NC NO 0 1 2. max. max. 2. 2. 0.0 0.0 Characteristics Operation speed 0.01mm-1m/sec Operating frequency Mechanical: 240 operations/min. Electical: 20 operations/min. Contact resistance 1m max. (initial value Insulation resistance 0m above at 00VDC 00VAC, 0/0 HZ for 1 minute between terminals of the same polarity 0VAC, 0/0 HZ for 1 minute between current-carrying Dielectric strength and non-current-carrying metal parts 0VAC, 0/0 HZ for 1 minute between each terminal and ground Vibration -HZ,mm double amplitude Mechanical durable: 1, 000m/Sec 2 (about 0G'S) Shock Malfunction: 00m/Sec 2 (about 0G'S) Ambient temperature General purpose type: -2 to +80, Sealed type: -1 to +80 Humidity General purpose type: 8% RH max., Sealed type: 9% RH max. Life Weight Degree of protection Mechanical: 20,000,000 operations/min. Electrical: 00,000 operations/min. About 22g to 8g IP Operating characteristics Models CM0 CM1 CM CM CM CM7 CM8 CM9 CM1701 CM1702 CM170 CM1704 CM170 CM174 OF Max. 0g 00g 00g 0g 0g 0g 0g 0g 70g 0g 10g 10g g 10g RF Min. 4g 0g 0g 4g 4g 4g 4g 4g 14g 28g 22g 42g g 42g PT Max. mm 4mm 4mm mm mm mm mm mm mm mm 7.1mm 2.7mm 20mm 2.7mm OT Min. 0.1mm 1.mm 1.mm 1.mm 1.mm.mm.8mm.8mm.mm 2mm 4mm 2.4mm.mm 2.4mm MD Max. 0.0mm 1.mm 1.mm 0.0mm 0.0mm 0.0mm 0.0mm 0.0mm 1.27mm 1mm 1.02mm 0.mm mm 0.mm FP Max. 20.mm 1.8mm 28.2mm 24.8mm.mm 2.mm 4.mm OP(mm) 1.9 17.4 0.828. 0.8 28.2 0. 2 0. 21.8 0.8.4 1.2.4 1.2 19 0.8 19 0.8 19 4.1 0.8 0

CM Micro Switch Operating characteristics Definitions of operating characteristics: OF: operating force Force needed to add to the executer unit to actuate switch contact RF: releasing force Force needed to add to the execter unit to make the switch contact back to normal position TF: total force Force needed to make executer unit move from free position to limitation position FP: free position Primary position of executer unit without external force adding to executer unit normal position to action contact position TTP: total tavel position The position of executer unit in case of executer unit reaching the limitation position PT: pretravel The distance or angle that the executer unit passes since free position to action position OT: overtravel The distance or angle that the executer unit surpasses action position OP: operating position The position of executer unit in case of the contact rapidly moving to the contact position for action RP: releasing position The position of executer unit in case of the contact rapidly backing to MD: movement differential The distance or angle from action position to reversion position TT: total tavel The distance or angle represents the movement till action and the total movement after all actions. Terminal Type CM-1701 CM-1702 CM-170 CM-1704 04

CM Micro Switch CM-174 CM-170 CM- CM-7 CM-8 CM-9 CM-0 CM-1 CM- CM- 0

CS Micro Switch Model designations C S N 00 1 C Performance Contact resistance Insulation resistance Dielectric strength Life Terminal Contact: 1NC & NO 2NC NO Category Cover material: N: Nylon P: Phenoilc Current Spring type Model 1 m max. (initial) 0m min. (at 00VDC) 1,000 VAC 0/0 Hz for 1 minute Mechanical:,000,000 operations min. Electrical:0,000 operations min.(full load) Outer drawing CSN001C2 CSN0C2 CSN021C2 CSN01C2 CSN041C2 CSN01C2 CSN01C2 0

CFS Foot Switch Features Designation Model Rating Type of switch enclosed & contact arrangement Cable type/length Cantact Action Force Material of Rind CFS-1 A 20VAC Mirco-switch momentary 0.7mm 2,C/0. meter,1 meter~ meter 1.2 kg Standard Type Momentary Action CFS-2 CFS- 1A 20VAC A 20VAC CM1704 Mirco-switch momentary 2pcs. 0.7mm 2,C/1 meter, meter~2 meter 0.7mm 2,C/1meter,1 meter~ meter 2A2B 1.1 kg 1.2 kg Plastics Aluminum cast CFS-S 1A 20VAC CM1704 0.7mm 2,C/1 meter,1 meter~2 meter 2A2B 1.1 kg Standard Type CFS- A 20VAC Imported alternative switch 0.7mm 2,2C/1 meter,1 meter~2 meter PUSH ON PUSH OFF 2 kg Plastics Aluminum cast Alternate Action CFS- A 20VAC Imported Micro-switch 0.7mm 2,C/1 meter PUSH 1A PUSH 1B kg Plastics CFS-201 A 20VAC 0.mm 2,C/1 meter~ meter 0.7 kg Mini Foot Switch Front End Push CFS-01 CFS-1 A 20VAC A 20VAC Micro-switch Momentary 0.mm 2,C/1 meter~ meter 0.mm 2,C/1 meter~ meter 0.7 kg 0.9 kg Plastics Protective Guard Foot Switch CFS-02 CFS-0 CFS-0 1A 20VAC A 20VAC A 20VAC CM1704 Push butoom switch alternate action Imported micro-switch Accessory: Cable gland (No cable) PUSH ON PUSH OFF PUSH 1A PUSH 1B.2 kg.1 kg. kg Plastics and Aluminum cast Large Type CFS-402 1A 20VAC CM1704.2 kg NOTES: 1, Add R for waterproof, available in CFS & CFS4. 2, Add Z for aluminum housing, available in CFS1, CFS# & CFS4. CFS-201 202 CFS-01 CFS-1 2 CFS-1 CFS-2 CFS- S CFS-02 CFS-402 07

Toggle Switch Features The current has A and 1A Movement way has fixed type and auto-return type (both single-throw and double-throw can return). The terminal block has screw terminal and solder terminal(tab terminal also can be used) Rainproof cap, water-proof and oil-proof, it is suitable for full series products. Mounting hole: mm Model designations CO B 1 2 Ratings Characteristic Type AC Rating DC Rating Contact resistance 1M max. (initial) Resistance Inductive Lamp CO C CO C CO C A 20V 1A V 1A 20V 20A V A 20V 1A 20V 1A 20V 20A V 00W 0V 00W 200V 400W V 800W 20V A 20V 0.8A V 0.A 20V 0.9A V A 20V A V 0.A 20V 0.A V 1A 0V - Insulation resistance Dielectric strength Vibration Ambient temperature Humidity 0M above (under 00VDC) 2000VAC 0/0Hz for 1 minute to Hz mm double amplitude -2 to +80 8%RH max. Motor CO C CO C 200W V 00W 20V 400W V(single phase) 0W 20V(three phase) 70W 20V(three phase) 7A 0V - Life Mechanical: 00,000 operations min. Electrical: 0,000 operations min. Designation Signal Description Type Contact Terminal CO COR C CR 1 21 22 2 21 A B C A 20VAC A 20VAC Spring return 1A 20VAC 1A 20VAC Spring return Single pole single throw ON-OFF Single pole double throw ON-ON Single pole double throw(central OFF) ON-OFF-ON Single pole double throw(central OFF single return) ON-OFF-ON Double pole single throw ON-OFF Double pole double throw ON-ON Double pole double throw(central OFF) ON-OFF-ON Double pole double throw(central OFFsingle return) ON-OFF-ON Tab terminal Screw terminal Solder terminal Nameplate CO-P1 CO-P2 CO-P 08

Toggle Switch C0B CB C0RB CRB C021B C21B C0R21B CR21B C0B CB C0RB CRB C022B C22B C0R22B CR22B C01B C1B C0R1B CR1B C02B C2B C0R2B CR2B Terminal Type Rainproof cap (Tow) 09

Power Pushbutton Switch Features Metal series shell Plastic series shell Characteristic Model Specification Mounting type Connection terminal Material CBSN- A KW Flush Mounting M. Iron CBSN-1 1A 2.2KW M4 CBSN-0 0A.7KW M CBSP-1 CBSP-0 1A 2.2KW 0A.7KW Surface Mounting M4 CBSY-1 CBSY-0 1A 2.2KW 0A.7KW M4 CBSY-1 1A 2.2KW Flush Mounting M. Plastic CBSY-0 0A.7KW M4 CBSN- CBSN-1

Power Pushbutton Switch CBSN-0 CBSP-1 CBSP-0 CBSY-1,0 CBSS-1,0 CPB-2 CPB-

Pushbutton Switch Model designations CBFM 2 A R Contact Form NC NO Ratings Characteristics Rated voltage Noninductive (A) Resistance Lamp Inductive (A) Inductive Motor Inrush Current (A) Operation speed Operating frequency 0.01mm-1m/sec Mechanical:240 operations/ minute, Electrical:20 operations/ minute NC NO NC NO NC NO NC NO NC NO Contact resistance 1m below( initial) VAC 20VAC 00VAC 1 1 2. 1.2 0.7 1 1 2. 2. 0.7 Insulation resistance Life 0M above (at 00VDC) Mechanical:20,000,000 times above Electrical:00,000 times above 8VDC 14VDC 0VDC VDC 20VDC 1 1 (2) 1 0.0 0.0 0.0 0.0 2. 2. 2. 0.0 0.0 0 1 max. max. Notes: 1. Each type has solder terminal, screw terminal and tab terminal, which are all selective. 2. Converse operation of actuator is always kept because of the compressiong of spring.it will be free and do switch on and off action under lever action.because when the pole stopper is kept by actuators (free state) so it can bear vibration and hitting. 1A 20VAC CM Micro Switch Terminal Type Number Model Fixed hole distance Connection terminal Code number CBFM CBLM CBMM 2 0 B A C Details Even button Convex button Big head 2m/m 0m/m Screw terminal Solder terminal Tab terminal Color of pushbutton switch R G Y B W Red Green Yellow Black White

Pushbutton Switch CBFM-2 CBFM-0 CBLM-2 CBLM-0 CBMM-2 CBMM-0 Appearance and characteristics CBF-2(0) Even button CBM-2(0) Mushroom button CBK-2(0) Latching button CIBN-2(0) Direct type of button with indicator lamp CBL-2(0) Convex button CSS-2(0) Two or three positions selector switch with short lever 1

Pushbutton Switch CSS-2(0) Automatic return switch with short lever CIB-2(0) Transformer type of push-button with indicator lamp CPNR-2(0) Indictor lamp CPR-2(0) Transformer type of inicator lamp base 1A 1B 1A base, 1B base Contact type =1NO, 01=1NC, =1NO+1NC, 22=2NO+2NC Model D d Size(mm) L1 L2 CBF-2-0 21(24.) 0(4) 1(18.) 40/48 CBF-2-0 40 0 1 40/48 CBM-2-0 40 0 42/0 CSS-2-0 21 0 4/1 CIBN-2-0 19 0 4/ CBK-2-0 40 0 42/0 14

Cassette Assembly Terminal Block CBC- CBC-20 L=1.7+8.xn L1=.+8.xn n=no. of poles L=17.+.8xn L1=.2+.8xn n=no. of poles No. of poles 2 4 7 8 9 No. of poles 2 4 7 8 9 L.9 42. 1.1 9.7 8. 7.9 8. 94.1 2.7 1. 9.9 L 9.2 0 0.8 71. 82.4 9.2 4 4.8. 1.4 147.2 L1 27..1 44.7. 1.9 70. 79.1 87.7 9. 4.9 1 L1 2.8 4. 4.4.2 7 8.8 97. 8.4 9.2 140.8 CBC-0 CBC-0 L=18+1.1xn L1=1+1.1xn n=no. of poles L=.+2xn L1=18.+2xn n=no. of poles No. of poles 2 4 7 8 9 No. of poles 2 4 7 8 9 L 44.2 7. 7 8. 9. 9.7 2.8 1.9 149.1 17.2 L 74. 94.7.1 1. 1. 17. 19.7 217.1 27. 27.9 278. L1 7.7 0.8.9 77 90.1.2. 9.4 142. 1. 18.7 L1 9. 79.7 0.1 0. 140.9. 181.7 202.1 222. 242.9 2. CBC-0 CBC-200 L=4+27xn L1=19+27xn n=no. of poles L=4.+.xn L1=19.+.xn n=no. of poles No. of poles 2 4 7 8 9 No. of poles 2 4 7 8 9 L 88 142 19 19 22 20 277 04 1 8 L. 141 17. 2 247. 28 18. 4 89. 42 40. L1 7 0 7 14 181 208 2 22 289 1 4 L1 90. 1 197 22. 28 0. 9 74. 4 44. 1