ontents utting utting utting Introduction B.2 utter B.4 Front cable cutter B.6 B able cutter B.7 utting and releasing tools B.10 Terminal rail cutter B.11 Electrician s knives B.12 Electrician s scissors B.13 B.1
Introduction utting utting B A large number of cables and conductors in many different types and designs are used to connect electrical and electronic components. The cables and wires must be accurately prepared for the various types of connection. The quality of the cutting process is therefore of critical importance. Weidmüller s wide range of cutting tools fulfils all the criteria for professional cable preparation. The demands Weidmüller makes of its products can be suarised simply: a smooth, straight cut without deforming the conductor. Users profit directly from this philosophy, whilst maintaining ease of use. Weidmüller is a specialist in the cutting of copper or aluminium cables. The product selection ranges from cutting tools for small cross-sections (with direct transmission of force) to cutting tools for large diameters. Mechanical efficiency together with the special cutting pattern reduces the manual force required to a minimum. B.2
Introduction utting At Weidmüller the term cutting refers to the severing of cables, wires and conductors of copper or aluminium with a tool appropriate for the application. The requirement for all cutting tools is to perform a smooth, straight cut without deforming the conductor. According to DIN 8588, experts differentiate between shear cutting, wedge-action cutting, tearing and breaking. Shear cutting is employed particularly in the cutting of cables, wires and conductors. utting tools with cross blades should perform an oblique cut and operate without play. The essential quality characteristics for professional cutting tools are a cutting edge shape which is suited to, and optimised for, the corresponding application, so that the manual forces required for cutting remain low. This allows singlehanded operation. Tools by Weidmüller comply with all requirements imposed on professional cutting tools. B Movement of the blades Position of the blades We differentiate between two basic cutting processes: Push cut Draw cut In push cut, the cutting movement is perpendicular between tool and workpiece. In draw cut, the cutting movement is oblique to the tool. In position 1 the blades act directly and over the whole length, i.e. considerable force is required. In position 2, the blades cross as in a pair of scissors, the cut is therefore offset and requires less force. Push cut Draw cut Position 1 Position 2 lean cut An unclean cut may have the following appearance: Insulation onductor onductor sheared off onductor pulled out Squeezed cable B.3
utter utter KT 8 KT 12 utting utting formation for different cable sizes increases the quality of the cuts for smaller cross-sections. B utting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 8. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! utting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 12. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Max. cutting performance copper cable Solid (max. conductor cross-section) Stranded (max. conductor cross-section) Flexible (max. conductor cross-section) Flexible, Stranded (max. diameter) Sector line 2 / AWG 2 / AWG 2 / AWG KT8 16 / 6 16 / 6 16 / 6 8 KT12 16 / 6 25 / 3 35 / 2 12 Max. cutting performance aluminium cable Stranded (max. conductor cross-section) 2 / AWG Stranded (max. diameter) Solid 2 16 / 6 8 16 25 / 6 8 25 Data-/ telephone-/ control cable O.D. max. 8 12 Tool data Length / width / height g 165 / 65 / 25 180 215 / 66 / 28 300 Tool closed Tool closed KT 8 1 9002650000 KT 12 1 9002660000 B.4
utter utter KT 20 Easy handling because of automatic opening Safety lock reduces risk of injury utting B utting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 20. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Max. cutting performance copper cable Solid (max. conductor cross-section) Stranded (max. conductor cross-section) Flexible (max. conductor cross-section) Flexible, Stranded (max. diameter) Sector line 2 / AWG 2 / AWG 2 / AWG KT20 16 / 6 35 / 2 70 / 2/0 20 Max. cutting performance aluminium cable Stranded (max. conductor cross-section) 2 / AWG Stranded (max. diameter) Solid 2 70 / 2/0 20 35 Data-/ telephone-/ control cable O.D. max. Tool data Length / width / height g 20 215 / 66 / 29 400 Tool closed KT 20 1 9002300000 Specifying solid-core aluminium cable corresponds to sector-shaped conductor with individual strands B.5
Front cable cutter Front cable cutter KTF 25 KTF 36 utting Easy handling Just hand tight Disengaging option in every cutting position B Front cable cutting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 25 Suitable in situations where cables have to be cut in narrow spaces. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Front cable cutting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 35. Suitable in situations where cables have to be cut in narrow spaces. Optimum leverage by eccentric drive Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Max. cutting performance copper cable Solid (max. conductor cross-section) Stranded (max. conductor cross-section) Flexible (max. conductor cross-section) Flexible, Stranded (max. diameter) Sector line 2 / kcmil 2 / kcmil 2 / kcmil KTF 25 120 / 250 120 / 250 25 KTF 36 300 / 600 300 / 600 35 Max. cutting performance aluminium cable Stranded (max. conductor cross-section) 2 / kcmil Stranded (max. diameter) Sector line 2 150 / 300 25 300 / 600 35 Data-/ telephone-/ control cable O.D. max. 25 35 Tool data Length / width / height g 245 / 80 / 40 900 330 / 100 / 49 1400 Tool closed Tool closed KTF 25 1 9002180000 KTF 36 1 9002190000 B.6
able cutter able cutter KT 36 KT 45 One-hand operation Easy handling Little force required Disengaging option in every cutting position utting B utting tool that does not damage the conductor; for cutting copper and aluminium cables. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! utting tool that does not damage the conductor; for cutting copper and aluminium cables. Optimum leverage by eccentric drive Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Max. cutting performance copper cable Solid (max. conductor cross-section) Stranded (max. conductor cross-section) Flexible (max. conductor cross-section) Flexible, Stranded (max. diameter) Sector line 2 / kcmil 2 / kcmil 2 / kcmil KT36 240 / 500 240 / 500 35 KT45 300 / 600 300 / 600 45 4 x 70 SM Max. cutting performance aluminium cable Stranded (max. conductor cross-section) 2 / kcmil Stranded (max. diameter) Sector line 2 240 / 500 35 400 / 800 45 4 x 95 SE Data-/ telephone-/ control cable O.D. max. 35 45 Tool data Length / width / height g 235 / 130 / 42 750 260 / 110 / 40 942 SM: Sector conductor stranded SE: Sector conductor solid SM: Sector conductor stranded SE: Sector conductor solid KT 36 1 9001090000 KT 45 1 9002000000 The dimensions of the cable cutter refer to the delivery condition, i.e. point of the pivot cutter parallel to the fixed cutter. The dimensions of the cable cutter refer to the delivery condition, i.e. point of the pivot cutter parallel to the fixed cutter. Spare pivot blade KT 36 1 9002910000 Spare pivot blade KT 45 1 9002100000 B.7
able cutter able cutter KT 52 KT 60 utting Optimum leverage by excentric drive Easy handling Min. hand force required Release option in every cutting position B utting tool that does not damage the conductor; for cutting copper and aluminium cables with a diameter of up to 52. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! able cutter that does not damage the conductor; for cutting copper and aluminium cables with max. 62 dia. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! Max. cutting performance copper cable Solid (max. conductor cross-section) Stranded (max. conductor cross-section) Flexible (max. conductor cross-section) Flexible, Stranded (max. diameter) Sector line 2 / kcmil 2 / kcmil 2 / kcmil KT52 400 / 800 400 / 800 52 3 x 150 SM + 1 x 70 SE KT60 800 / 1500 800 / 1500 62 4 x 185 SM Max. cutting performance aluminium cable Stranded (max. conductor cross-section) 2 / kcmil Stranded (max. diameter) Sector line 2 400 52 3 x 150 SM + 1 x 70 SE 1000 62 4 x 240 SM Data-/ telephone-/ control cable O.D. max. 52 62 Tool data Length / width / height g 300 / 150 / 50 1200 350 / 160 / 50 1700 SM: Sector conductor stranded SE: Sector conductor solid SM: Sector conductor stranded SE: Sector conductor solid KT 52 1 9007100000 KT 60 1 9002550000 The dimensions of the cable cutter refer to the delivery condition, i.e. point of the pivot cutter parallel to the fixed cutter. The dimensions of the cable cutter refer to the delivery condition, i.e. point of the pivot cutter parallel to the fixed cutter. Spare pivot blade KT 52 1 9007110000 Spare pivot blade KT 60 1 9002540000 B.8
able cutter able cutter KT 80 Optimum leverage by excentric drive Easy handling Min. hand force required Release option in every cutting position utting B able cutter that does not damage the conductor; for cutting copper and aluminium cables with max. 80 dia. Also suitable for sheet steel-shielded cables and cables with soft steel wire armouring. Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! For flexible and stranded conductors Max. cutting performance copper cable Solid (max. conductor cross-section) Stranded (max. conductor cross-section) Flexible (max. conductor cross-section) Flexible, Stranded (max. diameter) Sector line 2 / kcmil 2 / kcmil 2 / kcmil KT80 80 Max. cutting performance aluminium cable Stranded (max. conductor cross-section) 2 / kcmil Stranded (max. diameter) Sector line 2 80 Data-/ telephone-/ control cable O.D. max. Tool data Length / width / height g 80 560 / 190 / 58 2940 KT 80 1 9003950000 The dimensions of the cable cutter refer to the delivery condition, i.e. point of the pivot cutter parallel to the fixed cutter. Spare pivot blade KT 80 1 9003960000 B.9
utting and releasing tools WAW 1 Notching tool WAW 2 Notching tool KT ZQV utter utting B Tool for triing poles from WQV 2.5 to WQV 35 cross connections used in Weidmueller W-Series terminals. Tool for punching out the cross-connection windows of the Weidmüller W-Series, Disconnect terminal WTR 2.5, Fuse terminal WSI 6. utter for non-pinch cutting of Weidmüller Z-series cross-connections. Technical specification Technical specification Technical specification Length 167 Length 205 Length 215 227 g 338 g 300 g WAW 1 1 9004500000 WAW 2 1 9004510000 KT ZQV 1 9002170000 B.10
Terminal rail cutter TSLD Terminal rail cutting and punching tool utting B Mounting rail cutting and punching tool for: TS35/7.5 to EN 50022 (s = 1.0 ) TS35/15 to EN 50022 (s = 1.5 ) TS32 to EN 50035 (s = 1.5 ) TS15/5.5 to EN 50045 (s = 1.0 ) opper grounding rail 10 x 3 Punching ross- and lengthwise punches (elongated hole 12 x 6.4 ) (s = material density of the mounting rail) Technical specification Width Length Height 205 270 200 19000 g TSLD 1 9918700000 B.11
Electrician s knives SLIER Electrician s knife SLIER 1K Electrician s knife UTTY arpet knife utting B Knife with plastic body and two blades Electrician s knife with two notches and blade lock curved blade partially finely serrated rustproof Knife with plastic body and blade lock rustproof with round and triangular notches with ergonomic handle in pouch Technical specification Technical specification Technical specification SLIER 1 9041600000 SLIER 1K 1 9918160000 UTTY RED LINE 1 9041520000 B.12
Electrician s scissors SISSOR 2K Electrician s scissor SISSOR 1K Electrician s scissor utting B with wire cutter serrated cutting edge rustproof soft-touch handle for firm grip with wire cutter handle made from shockproof polyamide cutting edges with high-gloss chromate finish Technical specification Technical specification SISSOR 2 K 1 9918230000 SISSOR 1 K 1 9918690000 B.13
utting B B.14
ontents Introduction.2 and cutting tools.4 Special wire stripper.10 tool.11 tool for coaxial cable.12 able stripper.14 Special cable stripper.15 able knives.16.1
Introduction After a conductor has been cut it is then prepared for the next step or for crimping. For this purpose, a specific length of the conductor insulation has to be removed, while preventing damage to the conductor. The length of the conductor insulation to be removed depends on the terminal clamping point or the crimp to be processed. Professional stripping tools guarantee perfect results due to precise adjustment of the tool to the corresponding insulation and the conductor cross-section. Precision tools by Weidmüller guarantee that the user will always obtain consistent, reliable stripping results..2
Introduction means the cutting and removal of the insulation. The following must be ensured in performing this task: The stripping dimension must be observed and neither the conductor nor the remaining insulation must be damaged. DIN IE 60352 part 2 contains references to stripping faults which must be avoided: To avoid these faults, it is important that the stripping tool is suited to the insulation and to the cross-section range of the conductor. Do not use work knives or penknives because the stripping quality when using such tools depends entirely on the manual dexterity of the user. The quality is not consistent, even when the user is highly skilled. Preference should be given to hand-operated tools that adjust automatically to the corresponding cross-section of the conductor. They do not damage to the conductor during stripping and avoid the faults shown on the left. orrectly stripped conductor Possible faults during stripping: stripax stripping tools guarantee a consistent stripping result which complies with DIN regulations. The tools are rated for standard dimension PV insulation. Any PV insulation thicknesses deviating from normal can be set manually. The conductor stopper and integrated wire cutter allow highly versatile use of the tools. Insulation has not been cut properly Special insulation types such as Teflon, Silicone and Kapton require special stripping tools. These tools strip the conductor with punch blades. Remains of the conductor insulation are still to be found on the stripped conductor The conductor insulation has been damaged by the stripping tool Single conductors have been damaged or cut off by the stripping tool Single conductors have been twisted too tightly afterwards Single conductors are no longer twisted..3
and cutting tools and cutting tools stripax stripax 16 For flexible and massive conductors with PVinsulation length adjustable with shoulder automatic opening of the clamping jaws after stripping no splicing of the single conductor adjustable to different insulation thicknesses cable with double insulation in two processing steps without special adjustment Blade-device free from float and self-adjustable long durability optimised ergonomically design and cutting tool for flexible conductors with PV-insulation of 0.08...6 2 (~AWG 28...10) No damaging of the conductor due to special, self-adjustable stripping blades Processing of multi-conductors, with thin flat ribbon cables even multiple conductors in one operation and cutting tool for flexible and massive conductors with PV-insulation of 6...16 2 (~AWG 10... 6) utting of flexible and massive conductors up to 6 2 (AWG 10) No damaging of the conductor due to special blade forms Max. stripping performance able model onductor cross-section 2 onductor diameter Max. stripping length Adjustable depth of cut utting performance Max. cutting performance 2 stripax flexible & solid conductors with PV insulation 0.08 6 20 6 stripax 16 flexible & solid conductors with PV insulation 6 16 20 6 Tool data Length g 190 155 190 155 STRIPAX 1 9005000000 STRIPAX 16 1 9005610000 leaning brush 5 9005450000 Spare stripping blades 1 9054030000 leaning brush 5 9005450000 Spare stripping blades 1 9054080000.4
and cutting tool and cutting tool Mini-duro-stripax Blade set and cutting tool for conductors with special insulation types for conductor diameters 0.2 1.21 (~ AWG 32 18) Flexible and solid conductors with PV, Teflon (PTFE) and silicone insulation Special punch blades do not damage the conductor No splicing of the single conductors Blade inserts can be easily replaced All inserts fit one housing Max. stripping length diameter max. cutting performance Tool data Length g 3 7 2.2 135 110 Selection of blade sets onductor diameter olour (min./max.) AWG white 0.3 1.3 28 18 yellow 0.2 0.3 32/1, 32/7, 30/1, 30/7 red 0.3 0.5 28/1, 28/7, 28/19,26/1, green 0.55 0.8 24/7, 24/19, 22/1, blue 0.88 0.92 20/7, 20/19 black 1.0 1.21 18/1, 18/7, 18/19 2 Insulation material 0.08... 1.0 PV / silicone PTFE 26/7, 26/19, 24/1 PTFE 22/7, 22/19, 20/1 PTFE PTFE PTFE Order data Tools with blade set (Qty = 1) Order No. Order No. Order No. Order No. Order No. Order No. 9001280000 9003700000 9003710000 9003720000 9003730000 9003740000 Tool with all blade sets (Qty = 1) Order No. 9003500000 Order No. Order No. Order No. Order No. Order No. Order No. Blade set (Qty = 1) 9006970000 9003600000 9003610000 9003620000 9003630000 9003640000 Set of stripping blades (Mini Stripax up to April 2003) 9001290000.5
and cutting tools multi-stripax is the name given to the cutting and removal of conductor insulation. When carrying out this task it must be guaranteed that the appropriate length of insulation is removed and that neither the conductor nor the remaining insulation are damaged in any way. DIN IE 352 part 2 (formerly DIN IE 48/290) contains details of the stripping faults to avoid. AWG lines Fieldbus lines Standardised conductors Sensor and actuator lines ables for Rail industry ables for the aerospace industry Bus applications Power supply and distribution Sensors and actuators in the field The challenge The solution.6
and cutting tools multi-stripax Multifunctional stripping tool for use on a multitude of conductor insulation forms and configurations even those not covered by the standard multi-stripax the troubleshooter Interchangeable stripping units Proper stripping of any conductor round, flat or special profiles thanks to the specially shaped stripping blades Incorporates cutting function for up to 2.5 2 solid and 6 2 fine Non-fatiguing operation thanks to ergonomic design No damage to conductor or remaining insulation Good stripping results for industrial applications results reproduced accurately time and time again A long-lasting, reliable tool thanks to its robust design And of course, the customary Weidmüller repair service utting Positioning Special stripping units the answer to diverse stripping tasks The multi-stripax tool distinguished by its robust design was developed to handle all the stripping tasks met with in practice. Thanks to the interchangeable stripping units, a special solution can be found for every challenge in the marketplace. The specially shaped stripping blades guarantee perfect stripping results. The guide plates ensure the correct positioning of the wire and therefore prevent damage to the remaining wire. The clamping jaws hold the conductor with just the right force during the stripping operation and are matched to the specific situation. This flexibility within the variables that affect the result of the stripping operation turns the multi-stripax tool into a universal troubleshooter..7
and cutting tools and cutting tools multi-stripax 16 SL multi-stripax 6-16 High-quality stripping for industrial applications (complies with the requirements of the aircraft industry) Specially shaped stripping blades enable stripping of special types of insulation and conductor configurations Adjustable stop for setting stripping length Highly flexible thanks to interchangeable stripping units results reproduced accurately time and time again No damage to the conductor A long-lasting, reliable tool thanks to its robust design Integral cutting function tool for 16 2 PV-insulated conductors with special configurations tool for 6, 10, 16 2 PV-insulated conductors tool for 16 2 PV-insulated conductors with special configurations Position 1 (inner) for 16 2 flexible conductors with complex configurations Position 2 (innen) 16 2 solid, stranded and flexible conductors (not all types) length 7-20 (depends on type of conductor) Longer stripping lengths possible in several steps Adjustable stop for setting stripping lengths from 2.3 to 30 Integral cutting function for max. 2.5 2 solid or 6 2 flexible tool for 6, 10, 16 2 PV-insulated conductors Position 1 (outer) 6 2 solid, stranded, flexible Position 2 (middle) 10 2 solid, stranded, flexible Position 3 (inner) 16 2 sold, stranded, flexible (not all types) length 7-20 (depends on type of conductor) Longer stripping lengths possible in several steps Adjustable stop for setting stripping lengths from 2.3 to 30 Integral cutting function for max. 2.5 2 solid or 6 2 flexible able type onductor cross-section, min. onductor cross-section, max. length, min. length, max. position 1 position 2 position 3 position 4 position 5 position 6 flexible & solid conductors with PV insulation 16 2 16 2 2 no limit (in several steps) 16 2 solid, stranded, flexible 16 2 solid, stranded, flexible (not all types) flexible & solid conductors with PV insulation 6 2 16 2 2 no limit (in several steps) 6 2 solid, stranded, flexible 10 2 solid, stranded, flexible 16 2 solid, stranded, flexible (not all types) max. cutting capacity, fine-strand 6 2 6 2 max. cutting capacity, solid 2.5 2 2.5 2 max. cutting capacity, ribbon 10.2 x 4 10.2 x 4 Length/Width/Height 250/85/40 250 g 250/85/40 250 g utter not suitable for steel utter not suitable for steel multi-stripax 16 SL 1 9202220000 multi-stripax 6-16 1 9202210000 SL - special conductor (twisted) stripping unit PV 16 2 SL 1 9202270000 cutting blade 1 9203070000 wire stop-set 1 9203100000 stripping unit PV 6, 10, 16 2 1 9202260000 cutting blade 1 9203070000 wire stop-set 1 9203100000 unit code unit code D.8
and cutting tools and cutting tools multi-stripax ASI multi-stripax AWG High-quality stripping for industrial applications (complies with the requirements of the aircraft industry) Specially shaped stripping blades enable stripping of special types of insulation and conductor configurations Adjustable stop for setting stripping length Highly flexible thanks to interchangeable stripping units results reproduced accurately time and time again No damage to the conductor A long-lasting, reliable tool thanks to its robust design Integral cutting function and cutting tool for ASI cables and cutting tool for AWG conductors tool for ASI conductors with PTE, PUR and EPDM (rubber) insulation length 7-20 (depends on type of conductor) Inner position for removing cable sheathing Outer position for stripping wires Adjustable stop for setting stripping lengths from 2.3 to 30 Integral cutting function for max. 2.5 2 solid or 6 2 flexible tool for AWG conductors with PV, PTFE, etc. insulation 6 stripping positions for AWG 26-16 length 7-20 (depends on type of conductor) Adjustable stop for setting stripping lengths from 2.3 to 30 Integral cutting function for max. 2.5 2 solid or 6 2 flexible able type onductor cross-section, min. onductor cross-section, max. length, min. length, max. position 1 position 2 position 3 position 4 position 5 position 6 ASI-EPDM; TPE; PV 1.5 2 2 no limit (in several steps) 1.5 2 1.5 2 10.2 x 4 AWG conductors with PTFE and PV insulation AWG 26/1 AWG 20/19 2 no limit (in several steps) AWG 26 AWG 18 AWG 24 AWG 16 AWG 22 AWG 20 max. cutting capacity, fine-strand 6 2 6 2 max. cutting capacity, solid 2.5 2 2.5 2 max. cutting capacity, ribbon 10.2 x 4 10.2 x 4 Length/Width/Height 250/85/40 250 g 250/85/40 250 g utter not suitable for steel utter not suitable for steel multi-stripax ASI 1 9202250000 multi-stripax AWG 1 9202230000 Weidmüller ASI cable Order No. 9455110000 (yellow); 9455120000 (black) stripping unit for ASI 1 9202300000 cutting blade 1 9203070000 wire stop-set 1 9203100000 stripping unit for AWG conductor 1 9202280000 cutting blade 1 9203070000 wire stop-set 1 9203100000 unit code B unit code A.9
Special wire stripper Special wire stripper AM ASI LWL-stripax Quick and accurate stripping Positioning of cutting depth not neccesary No damage to the inner conductor AM ASI For ASI-cables with rubber insulation Trouble-free cutting of the inner conductor AM ASI special For ASI-cable types TPE- and PUR- isolation Easy positioning of the conductor with the integrated wire stop and cutting tool for plastic optical fibres with an inner conductor 1 ø length adjustable via wire stop Automatic opening of the clamping jaws after stripping Max. stripping performance able model AM ASI ASI-EPDM AM ASI special ASI-TPE FO stripax POF conductor with an inner conductor of 1 Ø onductor cross-section 2 onductor diameter Max. stripping length Adjustable depth of cut 1 7.5 utting performance Max. cutting performance 2 Tool data Length g 125 160 50 120 135 110 length limitless POF: polymer optical fibre AM ASI 1 9009950000 AM ASI special 1 9009940000 STRIPAX LWL 1 9003750000 Spare stripping blades 1 9003760000.10
tool tool tool for round PV cables AM25 / AM35 AM12 AM25: for round cables Ø 6...25 AM35: for round cables Ø 25...36 Insulation can be stripped from any point along the cable Pivoting blade for round, lengthwise and spiral cuts Retaining bracket with integral blade to break open an incision in the insulation Integral spare blade utting of UTP and STP data cables and other flexible copper cables with a diameter of up to 4 2 (~AWG11) of the outer insulations of UTP and STP data cables and other round cables with ø 0.5... 12.5 No damage to the shielding or conductor due to adjustable stripping blade Length gauge for repeated stripping lengths Max. cutting performance copper cable able model onductor cross-section onductor diameter Max. stripping length Adjustable depth of cut AWG AM25 AM35 PV round cable PV round cable 6 25 25 36 adjustable up to 4.5 adjustable up to 4.5 AM12 UTP and STP data cables AWG 20 AWG 11 0.5 12.5 adjustable utting performance Max. cutting performance 2 Non-shielded & shielded data cables Flexible copper cable 2 8 4 Tool data Length g 135 140 135 135 97 36 AM 25 1 9001540000 AM 35 1 9001080000 AM 12 1 9030060000 Spare blades 2 9001530000.11
tool for coaxial cable tool for coaxial cable ST 1-, 2- and 3-level stripping in one operation utter cassettes for ST tool for coaxial cable and round (shielded) data cables of 2.5...8 ø Fast changeover to other cable types due to adjustable and interchangeable screw holder Accompanying setting block allows a quick preadjustment of the cutting depth Interchangable cassettes with standard blade settings utter cassettes usable on both sides Max. cutting performance copper cable able model onductor cross-section AWG onductor diameter Max. stripping length Adjustable depth of cut utting performance Max. cutting performance 2 Non-shielded & shielded data cables Flexible copper cable 2 ST coaxial & round data lines 2.5 8 olour cutter cassettes B [] [] grey 3,9 red 6,0 yellow 12,0 blue 6,5 green 7,1 5,1 brown 7,5 3,5 orange 8,0 3,7 light green 6,0 6,0 black 8,6 2,3 Tool data Length g 100 65 Dim. A as stated by manufacturer (not defined by tool) ST 1 9030500000 Setting block 1 9005800000 Screwdriver 1 9005720000 Screw holder 1 9032060000 Dim. A as stated by manufacturer (not defined by tool) olour cutter cassettes Qty. Order No. grey 1 9032050000 red 1 9032040000 yellow 1 9032030000 blue 1 9032020000 green 1 9032000000 brown 1 9032010000 orange 1 9032200000 light green 1 9032210000 black 1 9032220000.12
tool for coaxial cable tool for coaxial cable ST vario 1-, 2- and 3-level stripping in one operation tool for coaxial cable and round (shielded) data cables of 2.5...8 ø Freely adjustable stripping lengths in pitches of 1 for shielding and dielectric material (min. stripping length approx. 3.2 ) Fast changeover to other cable types max. total stripping length 17 incl. 3 blades Max. cutting performance copper cable able model onductor cross-section onductor diameter Max. stripping length Adjustable depth of cut utting performance AWG ST vario coaxial & round data lines 2.5 8 17 Max. cutting performance 2 Non-shielded & shielded data cables Flexible copper cable 2 Tool data Length g 116 76 ST VARIO 1 9005700000 Blade holder 1 9005740000 Blade insert 1 9005730000 Screwdriver 1 9005720000 Includes spare blade set (1 set = 3 blades).13
able stripper able stripper STRIPPER ROUND STRIPPER ROUND TOP For fast and accurate stripping of cables for damp areas Ø8-13, e.g. NYM cable, 3 x 1.5 2 to 5 x 2.5 2 No need to set cutting depth Ideal for working in all kinds of junction boxes Round cable stripper Round cable stripper with individual wire stripper The universal round cable stripper is ideal for working in all kind of junction boxes. with stripper for individual wires, size 0.2-4.0 2, the individual stripping positions are indicated with integral cutter retractable blade clip for attaching tool safely to your clothing Max. stripping performance able model onductor cross-section 2 onductor diameter Max. stripping length Adjustable depth of cut Stripper round flexible & solid conductors with PV insulation 8 13 Stripper Round Top flexible & solid conductors with PV insulation 0.2 4 8 13 utting performance Max. cutting performance 2 Tool data Length g 125 47 125 50 Stripper round 1 9918040000 STRIPPER ROUND TOP 1 9918050000.14
Special cable stripper Special cable stripper Special cable and insulation stripper for data counications systems STRIPPER P Special cable stripper STRIPPER OAX Special cable stripper Special cable and insulation stripper for telecounications and IT cables, e.g. IBM network cables, printer cables, control cables, etc. for outside diameters 5-15 for strands and conductors 0.2-4.0 2 (24-12 AWG) Special cable and insulation stripper for PV-insulated data, counications and control lines TV antenna cables between 4.8 and 7.5 dia. RG 58 / RG 59 PV round cables 3 x 0.75 2 Max. stripping performance able model onductor cross-section 2 onductor diameter Max. stripping length Adjustable depth of cut utting performance Max. cutting performance 2 Stripper P Data cable / Telecounications and IT 0.25 4 5 15 Stripper oax coaxial & round data lines 4.8 7.5 Tool data Length g 125 55 97 22 STRIPPER P 1 9918060000 STRIPPER OAX 1 9918030000.15
able knives able knives SLIER NO 16 SLIER NO 27 Simple, fast and accurate stripping of insulation from all customary round cables from Ø 4 to 50. Knurled screw at end of handle for setting cutting depth (setting the depth avoid damaging the internal conductors). able cutter 4-16 Ø able cutter 8-28 Ø Working range: 4-16 O.D. Spare blade in handle Specially devised for cables used in wet conditions ircular and longitudinal cuts Spring-loaded cable grip with thumb guard Working range: 8-28 O.D. Spare blade in handle Specially devised for cables used in wet conditions ircular and longitudinal cuts Spring-loaded cable grip with thumb guard Max. stripping performance able model flexible & solid conductors with PV insulation flexible & solid conductors with PV insulation onductor cross-section 2 onductor diameter Max. stripping length Adjustable depth of cut 4 16 8 28 utting performance Max. cutting performance 2 Tool data Length g 122 75 122 75 SLIER NO 16 1 9918070000 SLIER NO 27 1 9918080000 Slicer No 16-35 2 9201430000 Slicer No 16-35 2 9201430000.16
able knives able knives SLIER NO 28 TOP SLIER NO 35 Simple, fast and accurate stripping of insulation from all customary round cables from Ø 4 to 50. Knurled screw at end of handle for setting cutting depth (setting the depth avoid damaging the internal conductors). able cutter 8-28 Ø with hook blade able cutter 27-37 Ø Working range: 8-28 O.D. with hook blade Spare blade in handle Specially devised for cables used in wet conditions ircular and longitudinal cuts Spring-loaded cable grip with thumb guard Working range: 27-37 O.D. Spare blade in handle Specially devised for cables used in wet conditions ircular and longitudinal cuts Spring-loaded cable grip with thumb guard Max. stripping performance able model flexible & solid conductors with PV insulation flexible & solid conductors with PV insulation onductor cross-section 2 onductor diameter Max. stripping length Adjustable depth of cut 8 28 27 37 utting performance Max. cutting performance 2 Tool data Length g 165 85 150 106.5 SLIER NO 28 TOP 1 9918090000 SLIER NO 35 1 9918100000 Slicer No 16-35 2 9201430000 Slicer No 16-35 2 9201430000.17
.18