Secure 254
Our range of cable ties consists of specialist cable ties including outside serrated and limited fire hazard. We also offer a range of stainless steel cable ties plus tooling and fixing accessories. Specialist cable ties Hellermann Tyton outside serrated ties 256 Stainless steel cable ties Stainless steel 316 uncoated ties 264 Outside serrated ties 258 Limited fire hazard (LFH) cable ties 259 Stainless steel ladder uncoated ties 266 Stainless steel ladder coated ties 267 Tensioning tools for stainless steel ties 268 Cable tie fixings Masonry mounts 260 Screw fixed cradles 260 Eyelet mounts 260 Stainless steel cable tie bases 261 Tools for cable ties CCTG 1 Hand tool for cable ties 263 Stainless steel band system Stainless steel band in dispenser 270 Stainless steel band in boxes 271 Stainless steel buckles - jaw type 271 Stainless steel sign mounting brackets 272 Easi-fix band 273 Betastrip 273 CCTG 2 Hand tool for cable ties 263 CCTG 3 Hand tool for cable ties 263 CCTG 4 Hand tool for cable ties 263 CCTG 5 Hand tool for cable ties 263 256
Specialist cable ties Specialist cable ties Hellermann Tyton Outside serrated cable ties - Polyamide 66 (PA66HS) The ever increasing demands within the mass transit, automotive and data cable installation industries for tighter bundles has led to problems with the conventional inside serrated cable tie design causing damage to cable insulations, especially in vibration environments. The Outside Serrated range of cable ties has overcome these problems. The design offers a high tensile strengths, low insertion forces and a smooth surface to the cable insulation, minimising any indentation or damage. The curved shape of the head allows the tie to follow the contours of the cable and takes up less space than other designs of cable ties. Ideal for use in areas where thin-walled or soft insulation wires and cable are being installed, e.g. railways, aircraft, data cable installations, electronics etc. Approved RA Rail Approved HF Halogen Free Material Polyamide 66 heat stabilised (PA66 HS) Colour options Black or natural Operating temperature -40 C to +105 C Continuous +145 C for 500h Flammability rating UL94 V2 LUL Cert No. 2247 257 Polyamide 66 cable ties Black and natural Black Pads number Black Natural Width Length Min. bundle dia. Max. bundle dia. Min. tensile strength T18ROS.HB3P 086/011275 T18ROS.NN3P 100 1.6 20.0 80 100 2.5 T18ROS.HB4P 086/011276 T18ROS.HN4P 100 1.6 20.0 80 200 T30ROS.HB3P 086/011279 T30ROS.HN3P 145 1.6 35.0 135 100 3.4 T30LOS.HB3P 086/011281 T30LOS.HN3P 200 1.6 50.0 135 100 T50SOS.HB3P 086/011282 - - 150 1.6 35.0 225 100 T50ROS.HB3P 086/011284 T50ROS.HN3P 200 1.6 50.0 225 100 4.6 T50MOS.HB3P - - T50MOS.NN3P 245 1.6 66.0 225 100 T50LOS.HB3P 086/011286 - - 384 1.6 110.0 225 100 T120ROS.HB3P 086/011287 T120ROS.HN3P 7.6 385 5.0 105.0 535 100 Pack qty
Manual cable marking: pre-termination Specialist cable ties Image Network Rail Outside serrated cable ties Polyamide 66 (PA66V0-HOI) Approved HF Halogen Free LFH Low Fire Hazard Material Polyamide 66 high oxygen index (PA66 V0-HOI) Colour options Natural Operating temperature -40 C to +85 C Continuous +105 C for 500h Flammability rating Low generation of toxic gases and corrosive acid. Low smoke generation, UL94 v0 LUL Cert No. 2247 Polyamide 66 cable ties natural Natural Width Length Min. bundle dia. Max. bundle dia. Min. tensile strength T18ROSFR.VN3P 2.5 100 1.6 20.0 80 100 T30LOS.VN3P 3.4 145 1.6 35.0 135 100 T50MOS.VN3P 4.6 150 1.6 35.0 225 100 T120ROS.VN3P 7.6 385 5.0 105.0 535 100 Pack qty 258
Specialist cable ties Outside serrated cable ties Our range of outside serrated cable ties offer high tensile strengths, low insertion forces and a smooth surface to the cable insulation for minimising any indentation, damage or chance of a short circuit. The curved shape of the head allows the tie to follow the contours of the cable and takes up less space than other designs of cable ties. These ties were designed originally for the automotive market but they are now also being used in many areas where thin-walled or soft insulation wires and cable are being installed, such as railways, aircraft, data cable installations and electronics. RA Rail Approved HF Halogen Free Image Transport for London Material Nylon 6.6 Colour options Black or natural Operating temperature -40 C to +110 C Flammability rating UL94 V2 Weather resistance UV resistant Standards UL: E160935 Outside serrated cable ties Natural Black Width Length Max. bundle diameter Min tensile strength (Kg) Pack quantity CTR110-OSN CTR110-OSB 2.5 110 24 8 100 CTR185-OSN CTR185-OSB 185 47 22 100 4.8 CTR300-OSN CTR300-OSB 300 80 22 100 Only available in Black CTR370-OSB 7.6 370 103 53 100 259
Manual cable marking: pre-termination Specialist cable ties Limited fire hazard (LFH) cable ties Our range of LFH cable ties are made from a self-extinguishing, V0: UL 94 halogen-free, fire resistant material. The multi-toothed ratchet cable ties enable strong locking and a high tensile strength. Ideal for use in both demanding environments and general applications where limited fire hazard properties are required, such as public buildings, factories, offshore, railway stations and the underground. LFH Low Fire Hazard RA Rail Approved HF Halogen Free Approved *Natural only Material Copolyamide 66/6 Colour Natural or black Operating temperature -40 C to +80 C Density 1,160kg/m3 Ultimate elongation 5% Tensile strength at yield 80MPa Flame resistance V0 UL94/E44716 Dielectric strength 34kV/mm (Natural) LUL Cert. No 1730 Image Transport for London Self-extinguishing test To test product functionality at minimum operating temperature. Limited fire hazard cable ties Natural Black Width Length Max. bundle dia. Min tensile strength (Kg) Pack quantity 1780 1780-B 2.5 100 23 8 100 1781 1781-B 140 32 13 100 3.5 1782 1782-B 200 51 13 100 1783 1783-B 300 82 22 100 4.6 1784 1784-B 360 100 22 100 1786 1786-B 280 82 53 100 7.5 1787 1787-B 360 100 53 100 260
Cable tie fixings Cable tie fixings Masonry mounts Masonry mounts are used for fixing cables to walls without using screws or plugs. Simply drill a hole (6 or 7mm) and push fit. For use with cable ties up to 9mm wide. Material Nylon 6.6 Colour option Black Screw fixed cradles HF Halogen Free Masonry mounts Length Hole size Max tie width Pack qty CMM1 45 6 9.0 100 CMM1L 45 7 9.0 100 Screw fix cradles are designed to provide a secure fixing for heavier cables. The cradles can be simply installed with a screw or bolt. Used in many different industries for a secure fixing. Material Nylon 6.6 Colour option Natural or black Operating temperature -40 C to +80 C Chemical resistance UV radiation HF Halogen Free Eyelet mounts Screw fixed cradles Part no: Natural The mounts take cable ties up to 4.3mm wide and an M4 screw. Suitable for restricted spaces. Part no: Black A B C F H Pack qty CSFM1 CSFM1B 9.5 15 3.5 5 7 100 CSFM2 CSFM2B 14.6 22.5 5 9.3 11 100 261 Eyelet mounts Part no: Natural Part no: Black Tie width Screw fix Pack qty CLPM1 CLPM1B 4.3 M4 100
Manual cable marking: pre-termination Cable tie fixings Image Network Rail Stainless steel cable tie base Our stainless steel cable tie bases meet the requirements of BS 7671. Ideal for securing cables and hoses, providing a complete fixing when used in conjunction with our stainless steel cable ties. Material 316 stainless steel Operating temperature -50 C to +150 C Standards BS 7671. RoHS and Reach compliant Manufactured from 316 grade stainless steel, with fixing holes to suit no. 8 screw, and suitable for cable ties up to 8mm wide. Stainless steel cable tie base Width Length Hole size Max. tie width Pack qty CSSTB1 16 12 5 8.0 50 262
CABLECRAFT creative wiring solutions Online Features & Benefits! Save time and money when you order online with Cablecraft - it s simple to use and allows you access to a range of features, downloads and useful information! Simply visit www.cablecraft.co.uk i SAVE MONEY Benefit from cheaper delivery costs & monthly online discounts & offers! SAVE TIME It s simple and quick! MORE PRODUCTS Extend your choice with over 17,000 products available online! MORE INFORMATION With a wide range of features, information & downloads available! CABLECRAFT creative wiring solutions Visit us online! CABLECRAFT creative wiring solutions CABLECRAFT creative wiring solutions CABLECRAFT creative wiring solutions Products Checkout My Account Product range Over 17,000 products available to purchase online. Technical View full technical information. Online Quotations Request before ordering. Downloads View and download our full product catalogue. Offers Look out for online offers and discounts! One Page Checkout Purchase online with our simple one page checkout. Easy Payment Options Credit/Debit Card, PayPal or Cablecraft Credit Account. Delivery Our delivery options include: Standard next day Saturday AM Pre 10.30 AM Pre 12.00 PM Collect from our warehouse Information All account information is available to you once logged in. Repeat Repeat previous orders. Request copy invoices/ statements. Create Product lists for all your different projects. Store Multiple delivery addresses to use time and time again. Save Time, Order Online at www.cablecraft.co.uk
Manual cable marking: pre-termination Tools for cable ties Tools for cable ties CCTG 1 Hand tool for cable ties An automatic cable tie tool with pressed steel mechanics and tough plastic body. Suitable for cable ties 2.5mm to 4.8mm wide. For cable tie width CCTG 1 2.5 to 4.8 CCTG 2 Hand tool for cable ties A heavy duty steel construction with a wide range of tension control settings. Suitable for cable ties 2.5mm to 4.8mm wide. For cable tie width CCTG 2 2.5 to 4.8 CCTG 3 Hand tool for cable ties Suitable for use with heavy duty cable ties. Ties are tensioned and cut manually. Suitable for cable ties 7.6mm to 9.0mm wide. For cable tie width CCTG 3 7.6 to 9.0 CCTG 4 Hand tool for cable ties Suitable for use with heavy duty cable ties. Ties are tensioned manually with a pre-set control and cut automatically. Suitable for cable ties up to 13.0mm wide. For cable tie width CCTG 4 Up to 13.0 CCTG 5 Hand tool for cable ties A heavy duty steel construction with four settings of tension control. For cable ties up to 4.8mm wide. An automatic cutter responds to the required level of tension. For cable tie width CCTG 5 Up to 4.8 264
Stainless steel cable ties Stainless steel cable ties Stainless steel 316 uncoated self-locking cable ties Our range of stainless steel uncoated cable ties are manufactured from 316 stainless steel and have a high tensile strength. The self-locking head design speeds installation and locks into place at any length along the tie. The fully enclosed head does not allow dirt or grit to interfere with the locking mechanism. These ties are flame retardant, tough, corrosion resistant and are ideal for demanding industries such as mass transit, ship building, oil rigs, and mining. Ball lock mechanism ORIGINAL POSITION Image Network Rail BALL LOCK POSITION Material 316 stainless steel Operating temperature -80 C to +538 C Flammability Fireproof, UV resistant and halogen free Loop tensile strength 4.6mm width: 68Kg (667N) 7.9mm width: 136Kg (1335N) 12.7mm width: 317Kg (3115N) Chemical resistance Salt spray resistant, corrosion resistant, weather resistant, outstanding chemical resistance, antimagnetic Standards UL Cert. No. E227552 DNV Cert No. E-6729 LUL Cert No. 1732 265 LISTED E227552
Manual cable marking: pre-termination Stainless steel cable ties Stainless steel 316 cable ties CTR127ST Width Length Approved Max. bundle dia. HT Min tensile strength (Kg) High temperature LFH Low Fire Hazard Pack quantity 127 32 68 100 CTR150ST 150 43 68 100 CTR200ST 200 50 68 100 CTR300ST 4.6 300 76 68 100 CTR360ST 360 102 68 100 CTR520ST 520 152 68 100 CTR680ST 680 200 68 100 CTR200HDST 200 50 136 100 CTR300HDST 300 76 136 100 CTR360HDST 360 102 136 100 CTR520HDST 7.9 520 152 136 100 CTR680HDST 680 200 136 100 CTR840HDST 840 250 136 100 CTR1000HDST 1000 302 136 100 CTR360EHDST See page 261 for Stainless steel cable tie bases. HF Halogen Free 360 110 317 100 CTR520EHDST 520 152 317 100 CTR620EHDST 12.7 620 192 317 100 CTR840EHDST 840 250 317 100 CTR1000EHDST 1000 302 317 100 266
Stainless steel cable ties Stainless steel ladder uncoated cable ties HF Halogen Free LFH Low Fire HT Hazard High temperature Our range of uncoated stainless steel ladder cable ties are manufactured from 316 stainless steel. They have a non-releasable locking mechanism that offers adjustment along the length of the tie. The stainless steel ties can be used in the most arduous of conditions or where the additional security, strength and fire resistance of a metal fixing is required. APPLICATIONS Used in many industries and locations from mass transit, ship building, oil rigs, mining and chemical to theatres and exhibition halls. In the event of a fire, cables will remain securely held in place. Material 316 stainless steel Colour Metallic Operating temperature -80 C to +500 C Flammability Flame retardant, halogen free and non-toxic Loop tensile strength 7.0mm width: 667N (150lb) 12.0mm width: 1335N (300lb) 267 LISTED E227552 Stainless steel ladder uncoated cable ties Image Network Rail Width Length Metal thickness Pack quantity CTR150LTST 150 0.30 100 CTR200LTST 200 0.30 100 CTR230LTST 225 0.30 100 CTR300LTST 7.0 300 0.30 100 CTR360LTST 360 0.30 100 CTR450LTST 450 0.30 100 CTR600LTST 600 0.30 100 CTR200HDLTST 200 0.35 100 CTR300HDLTST 300 0.35 100 CTR360HDLTST 12.0 360 0.35 100 CTR450HDLTST 450 0.35 100 CTR600HDLTST 600 0.35 100
Manual cable marking: pre-termination Stainless steel cable ties Stainless steel 316 ladder coated cable ties HF Halogen Free LFH Low Fire Hazard Our range of coated stainless steel ladder cable ties are manufactured from 316 stainless steel. They have a non-releasable locking mechanism that offers infinite adjustment along the length of the tie. The stainless steel ties can be used in the most arduous of conditions or where the additional security, strength and fire resistance of a metal fixing is required. APPLICATIONS Used in many industries and locations from mass transit, ship building, oil rigs, mining and chemical to theatres and exhibition halls. In the event of a fire, cables will remain securely held in place. Material 316 stainless steel Coating Pure polyester coating Colour Black Operating temperature -30 C to +150 C Flammability Fireproof, halogen free, UV resistant and non-toxic Loop tensile strength 7.0mm Width: 667N (150lb) 12.0mm Width: 1335N (300lb) LISTED E227552 Image Rail Engineer Stainless steel ladder coated cable ties Width Length Metal thickness Pack quantity CTR150LTSTC 150 0.30 100 CTR200LTSTC 200 0.30 100 CTR230LTSTC 225 0.30 100 CTR300LTSTC 7.0 300 0.30 100 CTR360LTSTC 360 0.30 100 CTR450LTSTC 450 0.30 100 CTR600LTSTC 600 0.30 100 CTR200HDLTSTC 200 0.35 100 CTR300HDLTSTC 300 0.35 100 CTR360HDLTSTC 12.0 360 0.35 100 CTR450HDLTSTC 450 0.35 100 CTR600HDLTSTC 600 0.35 100 268
Tensioning tools for stainless steel cable ties Tensioning tools for stainless steel cable ties LFH Low Fire Hazard CSST 1 Hand tool for cable ties This tool is specifically designed for use with coated or uncoated stainless steel cable ties. Features a variable tensioning device and automatically cuts when the desired tension is reached. Part number For cable tie width For cable tie thickness CSST1 Up to 7.9mm Up to 0.3mm How to use the CSST 1 tool for stainless steel cable ties Step one Step two Step three Place the tie around the object to be secured. Insert tail through the slot and into the ratchet jaw and tension by repeatedly pressing tool handles together. When the right tension is reached, the tail will shear off adjacent to the cable tie head. CSST 2 Hand tool for cable ties This tool is specifically designed for use with coated or uncoated stainless steel cable ties. Correct tension is achieved by repeatedly pressing tool handles together. A manual cutter is operated by a lever. Part number For cable tie width For cable tie thickness CSST2 Up to 7.9mm Up to 0.3mm How to use the CSST 2 tool for stainless steel cable ties Step one Step two Step three 269 Place the tie around the object to be secured. Insert tail through the slot and into the ratchet jaw and tension by repeatedly pressing tool handles together. When the right tension is reached, pull the manual lever forwards. This will shear off the tail adjacent to the cable tie head.
Manual cable marking: pre-termination Stainless steel band and buckle system Stainless steel band and buckle system The Cablecraft stainless steel band and buckle system can be quickly formed to suit virtually any diameter. It is available in three grades of stainless steel; SS201, SS304 and SS316 in coated and uncoated options. The band is supplied in boxes or handy plastic dispensers available with a centre turn facility for quick and easy application. Offers good resistance to oxidation and many moderately corrosive agents. Superior strength The band and buckle system is suitable for applications where superior strength is required such as securing hose clamps, pipes, road signs, lamp posts and cables. Image Network Rail 270
Stainless steel band and buckle system Plastic dispenser with stainless steel band LFH Low Fire Hazard Stainless Steel band is packed in easy-to-use plastic tote dispensers. Used in conjunction with stainless steel buckles - see overleaf. Material 201 grade stainless steel, uncoated Also available in stainless steel grades 304 and 316, coated and uncoated. Please contact Cablecraft for more details. LISTED E227552 Stainless steel band Reel Type Width Thickness Av. breaking strength Pack uncoated coated colour N Ibs qty (m) RSU09B306-5T RSC09B306-5T C203 9.5 0.65 4005 900 30.5 RSU12B307-5T RSC12B307-5T C204 12.7 0.75 6675 1500 30.5 RSU16B307-5T RSC16B307-5T C205 16.0 0.75 8344 1875 30.5 RSU19B307-5T RSC19B307-5T C206 19.0 0.75 10013 2250 30.5 How to apply the band and buckle system 1 Pull the buckle 2 onto the band, wings pointing towards the end. Clamp, holding band on band. Then push With the the buckle on the top and buckle back the strap over facing towards you, the doubled pass the tie completely around band, bending the bundle starting from the the end 1" front. under the buckle. Double wrap the band for a heavier job. Thread the tail through both tabs and the bridge of the buckle. p.62 3 Place the band in the tool. Push down gripper with thumb. Turn handle to tension clamp to maximum. Reverse handle carefully, half a turn, to avoid breaking. Using the Tensioning Hook and pulling in line with the buckle, tighten tail around bundle to the required tension. 4 Pull on the cutter lever ensuring that the band is cut off at the correct length. Bend tail backwards over the top of the bridge. 5 Hold the stub of the band with your thumb and hammer it flat Locate over the tail bridge between the tabs and of the bend buckle. tabs over the tail. Complete the clamp by hammering the wings over the stub. 6 The finished bands and buckles are now in place. 271
Manual cable marking: pre-termination Stainless steel band and buckle system Stainless steel band in boxes LFH Low Fire Hazard Stainless Steel band is packed in easy to use box dispensers. Material 201 grade stainless steel uncoated * Also available in SS304 and SS316, coated and uncoated LISTED E227552 Stainless steel band in boxes Type Width Thickness Average breaking strength Pack N Ibs quantity (m) RSU09B306-5C C203 9.5 0.65 4005 900 30.5 RSU12B307-5C C204 12.7 0.75 6675 1500 30.5 RSU16B307-5C C205 16.0 0.75 8344 1875 30.5 RSU19B307-5C C206 19.0 0.75 10013 2250 30.5 Type 201 stainless steel buckles - jaw type Uncoated stainless steel, jaw type buckles for use with the stainless steel band. LFH Low Fire Hazard Material High tensile strength 201 grade stainless steel Also available in SS304 and SS316, coated and uncoated Stainless steel buckles Type Width Pack qty RCU09BJ C253 9.5 1 RCU12BJ C254 12.7 1 RCU16BJ C255 16.0 1 RCU19BJ C256 19.0 1 272
Stainless steel band and buckle system Type 201 Stainless steel sign mounting brackets Sign mounts are used to mount traffic signs, junction boxes and enclosures. Withstands stress and vibrations as mounts are made from high tensile stainless steel. Material 201 grade stainless steel Also available in SS304 and SS316, coated and uncoated Bracket type SINGLE FLARED TWO BOLT Stainless steel sign mounting brackets Description Slot size Mini single bolt bracket Leg type Pack quantity RM12MS Straight leg, mini bracket 12.7 Straight 1 RM12MSA Straight leg, mini bracket, bolt & washer 12.7 Straight 1 RM12MF Flared leg, mini bracket 12.7 Flared 1 RM12MFA Flared leg, mini bracket, bolt & washer 12.7 Flared 1 Regular single bolt bracket RM19SS Straight leg single bolt bracket 19 Straight 1 RM19SSA Straight leg single bolt bracket, bolt & washer 19 Straight 1 RM19SF Flared leg single bolt bracket 19 Flared 1 RM19SFA Flared leg single bolt bracket, bolt & washer 19 Flared 1 Two bolt bracket RM19TS Straight leg, two bolt 19 Straight 1 RM19TSA Straight leg, two bolt bracket, bolt & washer 19 Straight 1 RRT03 Band tool For use with stainless steel band up to 19mm wide. RRT03 band tool Description Width (Kg) RRT03 For bands up to 19mm wide 2.0 273
Manual cable marking: pre-termination Easi-Fix band & Betastrip Easi-fix band LSF Low Smoke & Fume Easi-fix band is made from carbon steel with an LSF coating. It is ideal for fixing single cables or small bundles to any surface. Simply cut to length and nail or screw into place. Available in two colours red or black. Material Carbon steel with LSF coating Colour options Red or black Operating temperature -15 C to +50 C Breaking load 125Kg Easi-fix band Colour Width Length (m) Pack qty PVAM121B 12 10 1 Black PVAM171B 17 10 1 PVAM121R 12 10 1 Red PVAM171R 17 10 1 Betastrip Betastrip is made from aluminium with a polyester resin coating. It is prepunched, ideal for fixing single cables or small bundles to any surface. Simply cut to length and nail or screw into place. Available in two colours, orange or grey. LSF Low Smoke & Fume Material Aluminium strip with polyester resin coating Colour options Grey or orange Operating temperature -15 C to +50 C Breaking load 125Kg Diameter of hole 7.0mm Betastrip Part number Colour Width Length (m) Thickness Pack qty 0413 Grey 19 10 1.2 1 0416 Orange 19 10 1.2 1 274