FEATURES: Click on Series name for product info on aimtec.com Up to 2mA LED Driver High Power LED Driver Constant Output Current Wide (7:1) Input Voltage Range High Efficiency (Up to 96%) Remote Control Function PWM Digital Dimming Function (1 9%) 24 Pin DIP Package or 2x1 Inch Package Types Analogue Dimming Function ( 1%) 1 Models Single output Model Input Voltage (Vdc) Output Voltage (Vdc) Maximum Rated Current (ma) Efficiency Max (%) AMLD-363IZ 5-36 2-32 3 96 AMLD-3635IZ 5-36 2-32 35 96 AMLD-365IZ 5-36 2-32 5 96 AMLD-366IZ 5-36 2-32 6 96 AMLD-367IZ 5-36 2-32 7 96 AMLD-368IZ 5-36 2-32 8 96 AMLD-369IZ 5-36 2-32 9 96 AMLD-361IZ 5-36 2-32 1 96 AMLD-3611IZ 5-36 2-32 11 96 AMLD-3612IZ 5-36 2-32 12 96 AMLD-3613IZ 5-36 2-32 13 95 AMLD-3614IZ 5-36 2-32 14 95 AMLD-3615IZ 5-36 2-32 15 95 AMLD-3616IZ 5-36 2-32 16 95 AMLD-3618IZ 5-36 2-32 18 95 AMLD-362IZ 5-36 2-32 2 95 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 1- Analogue dimming is not supported on 1.6A, 1.8A, 2.A models Input Specifications Parameters Nominal Typical Maximum Units Voltage range 24 5-36 36 VDC On/Off Control (Analog Control) ON: Open or V> V <.6V Input voltage range (-12Vdc) (Leave open if not used) OFF:.6V> V <5V (1mA Max) Dimming Control (Digital Control) Max PWM Frequency (1%~9%) 2Hz / 2KHz for all models Dimming Control (Analog Control) -4.5V (1mA max) Analog Voltage (%~1%) models: AMLD-363IZ, AMLD-3635IZ, Input voltage range (-12Vdc)* AMLD-365IZ (Leave open if not used) -6.5V (1mA max) Analog Voltage (%~1%) models: AMLD-366IZ, AMLD-367IZ, For models with 1.5A and below AMLD-368IZ, AMLD-369IZ, AMLD-361IZ, AMLD-3611IZ, AMLD-3612IZ NOTE: Exceeding 12Vdc on Dimming Control pin will damage the converter. Output Specifications Parameters Conditions Typical Maximum Units Current accuracy ±2 % Short Circuit protection Regulated at the rated current for each model Output Open Protection No Load Max load capacitance 1 µf Ripple & Noise 2MHz Bandwidth 3 mv p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 1% load 26 1.5MHz for 1.6A, 1.8A, 2.A models KHz -4 to +85 Operating temperature o C -4 to +7 (1.2A, 1.3A, & 1.5A, 1.6A, 1.8A, 2.A models) Storage temperature -4 to +125 o C Max Case temperature 1 o C Cooling Free Air Convection www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 1 of 13 North America only
Up to 2mA LED Driver Thermal Impedance 13.17 o C/W Humidity 95 % RH Case material Non-Conductive Black Plastic, Nickel-Coated Copper 1.3A, 1.4A & 1.5A models) Potting material Epoxy (Flammability UL94V-) Weight 12 g 1.25.8.4 inches / 31.8 2.3 1.2 mm Dimensions (L x W x H) 1.25.8.45 inches / 31.8 2.3 11.3 mm (1.3A, 1.4A, & 1.5A models) 1.99 x.99 x.37 inches / 5.7 x 25.3 x 9.55 mm (1.6A, 1.8A, 2.A models) Safety Specifications Parameters Agency approvals Standards CE EN 5522, class B EN5524 IEC 61-4-2 (Perf. Criteria B) IEC 61-4-3 (Perf. Criteria A) IEC 61-4-6 (Perf. Criteria A) IEC 61-4-8 (Perf. Criteria A) Pin Out Specifications Pin Single 1 Remote On/Off 2 -Vin 3 -Vin 9 NC 11 NC 14 LED + 16 LED - 22 +Vin 23 +Vin 24 DIM NC: Not Connected Dimensions (.3A to 1.2A models) Mechanical Tolerances Case tolerance ±.25mm or ±.1 inches Pin tolerance ±.5 or ±.2 www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 2 of 13 North America only
Dimensions (1.3A, 1.4A, & 1.5A models) Up to 2mA LED Driver Dimensions (1.6A, 1.8A, & 2.A models) Pin Single 1 +Vin 2 -Vin Remote On/Off & 3 PWM Dimming 4 LED + 5 LED - www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 3 of 13 North America only
Up to 2mA LED Driver Efficiency versus Input Voltage 1 Efficiency (%) 8 6 4 2 5 1 15 2 25 Input Voltage (V) Derating 3 www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 4 of 13 North America only
Application Circuit Up to 2mA LED Driver + Vin Dimming 1 st LED C1.1uF If analogue DIM is not used C1 must be installed Dim + Vin AMLD-IZ LED + ON/OFF Leave Open if not used GND ON/OFF GND LED - Last LED Note: The relation between input and output voltage for AMLD-IZ LED Driver step-down converter series is: Vin 4V Vout Total LED voltage Vout / LED voltage = LED quantity Output Current versus Dimming Voltage 35 AMLD-363IZ 3 31 25 2 221 15 147 1 5 76 2 V 1V 2V 3V 4V 5V www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 5 of 13 North America only
Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver 4 35 3 25 2 15 1 5 365 AMLD-3635IZ 284 21 138 61 V 1V 2V 3V 4V 5V 6 5 52 4 3 AMLD-365IZ 47 287 2 1 181 68 V 1V 2V 3V 4V 5V www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 6 of 13 North America only
Up to 2mA LED Driver Output Current versus Dimming Voltage (continued) 7 629 6 5 AMLD-366IZ 485 4 3 2 348 22 1 87 V 1V 2V 3V 4V 5V 8 7 711 AMLD-367IZ 6 5 4 57 432 3 2 1 297 163 23 V 1V 2V 3V 4V 5V 6V www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 7 of 13 North America only
Up to 2mA LED Driver Output Current versus Dimming Voltage (continued) 9 8 7 6 5 4 3 2 1 815 728 AMLD-368IZ 558 383 218 V 1V 2V 3V 4V 5V 6V 73 1 9 8 7 6 5 4 3 2 1 92 AMLD-369IZ 73 55 36 185 86 V 1V 2V 3V 4V 5V 6V www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 8 of 13 North America only
Up to 2mA LED Driver Output Current versus Dimming Voltage (continued) 12 AMLD-361IZ 1 12 8 814 6 4 2 633 453 278 92 V 1V 2V 3V 4V 5V 6V 12 1 8 6 4 2 111 AMLD-3611IZ 9 75 517 317 15 V 1V 2V 3V 4V 5V 6V www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 9 of 13 North America only
Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver 14 12 1 8 6 4 1216 AMLD-3612IZ 986 797 591 385 2 118 V 1V 2V 3V 4V 5V 6V www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 1 of 13 North America only
Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 11 of 13 North America only
Up to 2mA LED Driver Iout(mA) 16 Output current vs VADJ AMLD-3514IZ 14 12 1 8 6 4 2 1 2 3 4 5 www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 12 of 13 North America only
Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 62 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 51e R12.R 13 of 13 North America only