MIFAB, Inc. MPB-2011-US Closet Carrier Trim Kits PART # DESCRIPTION Wt./(Lbs.) MC-100 Standard nipple trim kit only for adj. chair carriers:mc-10, MC-12, MC-13* 40.00 $419.00 MC-100-8 Adj. horn nipple trim kit only for adj. chair carriers: MC-10, MC-12, MC-13* 40.00 $419.00 MC-100-OR Rolling thread nipple trim kit only for adj. chair carriers: MC-10, MC-12, MC-13* 40.00 $419.00 MC-100-NN Trim kit less nipple with H-1167-KA-14 for adj. chair carriers: MC-10, MC-12, MC-13* 40.00 $419.00 MC-200 Trim kit only for fixed vertical carriers: MC-14, MC-15* 33.00 $377.00 *Note: 2 required for double (back to back) carrier installations Trim kits are not complete carriers! Add appropriate fitting from below! No Hub Carrier Fittings PART # DESCRIPTION MC-10L-PF Left hand carrier fitting only for MC-10L horizontal adj. chair carrier 29.00 $419.00 MC-10R-PF Right hand carrier fitting only for MC-10R horizontal adj. chair carrier 29.00 $419.00 MC-10D-PF Double carrier fitting only for MC-10D horizontal adj. chair carrier 43.00 $730.00 MC-10L-27-PF Left hand carrier fitting only for MC-10L-27 horizontal adj. chair carrier 31.00 $611.00 MC-10R-27-PF Right hand carrier fitting only for MC-10R horizontal adj. chair carrier 31.00 $611.00 MC-10D-27-PF Double carrier fitting only for MC-10D-27 horizontal adj. chair carrier 45.00 $922.00 MC-10L-27-36-PF Left hand carrier fitting only for MC-10L-27-36 horizontal adj. chair carrier 55.00 $620.00 and 36" barrel MC-10R-27-36-PF Right hand carrier fitting only for MC-10R-27-36 horizontal adj. chair carrier 55.00 $620.00 and 36" barrel MC-10D-27-36-PF Double carrier fitting only for MC-10D-27-36 horizontal adj. chair carrier 71.00 $877.00 and 36" barrel MC-10L-EXT-PF High rough in (ADA) left hand carrier fitting only for MC-10L- EXT 32.00 $419.00 horizontal adj. chair carrier MC-10R-EXT-PF High rough in (ADA) right hand carrier fitting only for MC-10R-EXT 32.00 $419.00 horizontal adj. chair carrier MC-10D-EXT-PF High rough in (ADA) double carrier fitting only for MC-10D-EXT 46.00 $730.00 horizontal adj. chair carrier MC-12-PF Carrier fitting only for MC-12 vertical adj. chair carrier 39.00 $530.00 MC-12D-PF Carrier fitting only for MC-12D vertical adj. chair carrier 50.00 $841.00 MC-13-2-PF Carrier fitting only for MC-13-2 vertical adj. chair carrier w/ 2 side inlets 45.00 $855.00 MC-13L-PF Carrier fitting only for MC-13L vertical adj. chair carrier w/ left hand side inlet 45.00 $855.00 MC-13R-PF Carrier fitting only for MC-13R vertical adj. chair carrier w/ right hand side inlet 45.00 $855.00 MC-13D-PF Carrier fitting only for MC-13D vertical adj. back to back chair carrier w/ one side inlet 56.00 $1,161.00 MC-13D-2-PF Carrier fitting only for MC-13D-2 vertical adj. back to back chair carrier w/ two side inlets 56.00 $1,161.00
No Hub Carrier Fittings PART # DESCRIPTION Wt./(Lbs.) MC-14-3-V2-PF Carrier fitting only for MC-14-3-V2 fixed vertical chair carrier w/ 3" barrel and 2" vent 26.00 $377.00 MC-14-4-V2-PF Carrier fitting only for MC-14-4-V2 fixed vertical chair carrier w/ 4" barrel and 2" vent 31.00 $377.00 MC-14-4-V4-PF Carrier fitting only for MC-14-4-V4 fixed vertical chair carrier w/ 4" barrel and 4" vent 31.00 $377.00 MC-15L-PF Carrier fitting only for MC-15L fixed vertical chair carrier offset to left side of stack 36.00 $371.00 MC-15R-PF Carrier fitting only for MC-15R fixed vertical chair carrier offset to right side of stack 36.00 $371.00 MC-15D-PF Carrier fitting only for MC-15D fixed vertical back to back offset chair carrier 46.00 $530.00 Hub & Spigot Carrier Fittings PART # DESCRIPTION MC-10L-HS-PF Left hand carrier fitting only for MC-10L-HS hub & spigot horizontal adj. chair carrier 35.00 $419.00 MC-10R-HS-PF Right hand carrier fitting only for MC-10R-HS hub & spigot horizontal adj. chair carrier 35.00 $419.00 MC-10D-HS-PF Double carrier fitting only for MC-10D-HS hub & spigot horizontal adj. chair carrier 45.00 $730.00 MC-10L-HS-27-PF Left hand carrier fitting only for MC-10L-HS-27 hub & spigot horizontal adj. chair carrier 37.00 $611.00 MC-10R-HS-27-PF Right hand carrier fitting only for MC-10R-HS-27 hub & spigot horizontal adj. chair carrier 37.00 $611.00 MC-10D-HS-27-PF Double carrier fitting only for MC-10D-HS-27 hub & spigot horizontal adj. chair carrier 47.00 $922.00 MC-10L-HS-27-36-PF Left hand carrier fitting only for MC-10L-HS-27-36 hub & spigot horizontal adj. chair 66.00 $742.00 carrier and 36" barrel MC-10R-HS-27-36-PF Right hand carrier fitting only for MC-10R-HS-27-36 hub & spigot horizontal adj. chair 66.00 $742.00 carrier and 36" barrel MC-10D-HS-27-36-PF Double carrier fitting only for MC-10D-HS-27-36 hub & spigot horizontal adj. chair carrier 90.00 $999.00 and 36" barrel MC-12-HS-PF Carrier fitting only for MC-12-HS hub & spigot vertical adj. chair carrier 45.00 $600.00 MC-12D-HS-PF Carrier fitting only for MC-12D-HS hub & spigot vertical adj. chair carrier 57.00 $911.00 MC-13-2-HS-PF Carrier fitting only for MC-13-2-HS hub & spigot vertical adj. chair carrier w/ 2 side inlets 58.00 $925.00 MC-13L-HS-PF Carrier fitting only for MC-13L-HS hub & spigot vertical adj. chair carrier 58.00 $925.00 w/ left side inlet MC-13R-HS-PF Carrier fitting only for MC-13L-HS hub & spigot vertical adj. chair carrier 58.00 $925.00 w/ right side inlet MC-13D-HS-PF Carrier fitting only for MC-13D-HS hub & spigot vertical adj. back to back chair carrier 69.00 $1,231.00 w/ one side inlet MC-13D-HS-2-PF Carrier fitting only for MC-13D-2-HS hub & spigot vertical adj. back to back chair carrier 69.00 $1,231.00 w/ two side inlets MC-14-4-V2-HS-PF Carrier fitting only for MC-14-4-V2-HS hub & spigot fixed vertical chair carrier 36.00 $397.00 w/ 4" barrel and 2" vent MC-15L-HS-PF Carrier fitting only for MC-15L-HS hub & spigot fixed vertical chair carrier 41.00 $475.00 offset to left of stack MC-15R-HS-PF Carrier fitting only for MC-15R-HS hub & spigot fixed vertical chair carrier 41.00 $475.00 offset to right of stack MC-15D-HS-PF Carrier fitting only for MC-15D-HS hub & spigot fixed vertical back to back offset 50.00 $635.00 chair carrier
MC-100 Trim Kit Contents MC-100 MC-10-PFPOZ Faceplate w/ "O" ring 1 $188.00 MC-FP "O" ring Faceplate "O" ring gasket (assembled inside faceplate groove) 1 $11.00 MC-10-PFTZ Foot 2 2pcs. $49.00 H-1167-KA-10 5/8" x 10" threaded rods with 5/8" hex nuts 4 4pcs $13.00 MC-10-PRP 8" plastic rod protector 4 4pcs $2.75 MC-10-PHP1 MC-10-PFH Finishing hardware 1 $39.00 (4 cap nuts & 8 high density polyethelyne washers) H-1176 bowl saver washer 1 $2.50 MC-10-PHP2 H-1164 5/8" hex nuts 4 $1.65 H-1143 1/2" x 1-3/4" machine screws with shoulder 4 $1.65 MC-10-PNS Silicone sealant for tapered thread & adj. horn nipple 1 $16.00 MC-10-LUB Lubricant for faceplate "O" ring nipple 1 $5.50 Gaskets MC-10-PBG Bowl gasket 1 $42.00 MC-10-PFPG Faceplate gasket 1 $24.00 Nipple MC-10-PN8-31 8" Standard tapered thread ABS nipple 1 $49.00
MC-200 Trim Kit Contents MC-200 PART # DESCRIPTION REQ'D QTYW t./(lbs. (Each) MC-14-PFP Faceplate 1 $180.00 MC-FP O-ring Fitting "O" ring 1 $11.00 MC-10-PNS Silicone sealant for tapered thread & adj. horn nipple 1 $16.00 MC-10-LUB Lubricant for faceplate "O" ring nipple 1 $5.50 MC-14-PFT Foot 2 2pcs $49.00 MC-10-PHP1 Finishing hardware 1 $44.50 (4 cap nuts & 4HDPE washers) H-1146 1/2" Flat washers 4 $1,365.00 H-1141 1/2" x 1" Hex head machine screws 4 $8.00 H-1167 5/8" x 10" Threaded rods (for rod protectors 4 $12.00 see MC-100 parts) MC-14-PHP1 H-1164 5/8" hex nuts 8 $1.65 H-1147 1/2" x 1-1/4" Hex head machine screws 4 $6.00 H-1146 1/2" Flat washers 4 $1.65 Nipple MC-10-PN8-31 8" Standard tapered thread ABS nipple 1 $49.00 Closet Carrier Nipple Variations Carrier Model PART # DESCRIPTION No. Suffix MC-10-PN8-31 8" Standard tapered thread ABS nipplestandard $49.00 MC-10-PN12-31 12" tapered thread ABS nipple -12.00 $53.00 MC-10-PN8R-31 8" rolling thread ABS nipple -OR $49.00 MC-10-PN12R-31 12" rolling thread ABS nipple -OR12 $53.00 MC-10-PN8AH-31 8" tapered thread ABS nipple w/ adj. h -AH $49.00 MC-10-PN12AH-31 12" tapered thread ABS nipple w/ adj. -AH12 $53.00 MC-10-PN4R-50 4" rolling thread cast iron nipple -CI-4 $32.50 MC-10-PN6R-50 6" rolling thread cast iron nipple -CI-6 $41.00 MC-10-PN8R-50 8" rolling thread cast iron nipple -CI-8 $49.00 MC-10-PN12R-50 12" rolling thread cast iron nipple -CI-12 $53.00 MC-10-PN24R-50 24" rolling thread cast iron nipple -CI-24 $164.00
MC-200 Trim Kit Contents Cont'd Parts for Closet Carrier Variations Carrier Model PART # DESCRIPTION No. Suffix MC-10-PTFK Finishing tiling frame w/ hardware -1 $40.00 MC-10-3-PRSFK Rear anchor support kit -3 $32.50 (normally furnished at no charge with the complete carrier) MC-10-AFS Auxiliary fixture support for wide pipe chase -10 $455.00 MC-10-PFH-14 Set of 4 vandal proof fixture securing cap nuts -14 $69.00 MC-10-PFH-S Set of 4 fixture securing shoulder cap nuts -S $42.00 MC-10-PCW Nipple wrench $56.00 MC-10-FVS Flush valve support $46.00 H-1167-KA-14 5/8" x 14" Threaded rod (4 required) varies by longer nipple suffix $13.00 TC-2, TC-4 2" or 4" caps for aux. / side inlets, varies by closet carrier model $32.50 MC-31 Parts MC-31-PLA Upright, 42" 2 $131.00 MC-31-PUP Universal Plate 1 $109.00 MC-31-PHP Hardware pack (contents listed below) 1 $65.00 MC-31-PHP H-1104 5/16" U bolts 4 $3.75 H-1102 5/16" Hex nuts 8 $1.10 H-1087 1/4-20 x 8" Threaded rods 6 $3.75 H-1080 1/4-20 Hex nuts 24 $1.10 H-1081 1/4" Flat washers 32 $1.00 MC-41 Parts MC-40-PHB Header bracket 2 $32.50 MC-40-PLA Upright, 36" 2 $82.00 MC-41-PA Concealed arm w/ locking & levelling hardware 2 $100.00 MC-40/50-PN6 6" steel nipple and screws for concealed arm 2 $32.50 MC-40/50-PLN Lock nut for steel nipple 2 $6.25 H-1137 Tie rod 1 $21.75 H-1083 1/4-20 x 1" Cut point set hex head screw 2 $2.25 H-1132 3/8" x 1/2" Cut point square head screws 4 $2.25 H-1084 1/4" Rubber bumpers 4 $1.10 H-1126 3/8" Hex nuts 2 $1.10 H-1208 Eye bolt hardware kit for CI lavs (suffix -I for MC-40, MC-41 lav carriers $79.00
MC-30/40/50 Series Parts Variations Carrier Model PART # DESCRIPTION No. Suffix MC-31-PBP Lower bearing plate for MC-32 1.00 $46.50 H-1101 5/16" x 10" Threaded rods for 2.00 $8.25 MC-32 lower bearing plate H-1102 5/16" nuts (MC-32 bearing plate studs) 4 $1.10 H-1103 5/16" washers MC-32 bearing plate studs 4 $1.10 MC-40-PUA Left or right exposed arm for MC-40 2 $169.00 MC-40-PUA-IK Installation kit for MC-40-PUA exposed arm 2 $44.50 MC-40-R-PLA Round upright, 36", for MC-41-R series 2 $100.00 MC-41-PDB Double header bracket for MC-41-D 2 $65.00 MC-40-R-PHB Header bracket for round uprights 2 $41.00 MC-41-AHK Set of replacement leveling & locking hardware 1 $41.00 for concealed arms MC-41-PE2 2" deep x 3-3/8" dia. Chrome plated escutcheon 2 $94.00 MC-41-R-PA Concelaed threaded arm w/ locking & 2 $99.50 leveling hardware for round header bracket MC-42-PA ADA lav. concealed arm w/ locking & 2 $118.00 leveling hardware MC-42-R-PA ADA lav. concelaed threaded arm w/ locking & 2 $120.00 leveling hardware for round header bracket MC-53-PB Adjustable wall bracket for MC-50 series 2 $80.00 H-1138 3/8" x 1/2" flat Phillips head machine screw 2 $1.10 for MC-53-PB H-1126 3/8" Hex nuts 2 $1.10 MC-51-PBP Back plate for MC-53 series 2 $80.00 H-1099 5/16" x 6" Threaded rod 8 $10.50 MC-60-PHB Waste fitting upright mounting bracket for 4.00 $65.00 sink carriers