p. 8 aluline These aluboard8 rails are black anodised, as per customer s request. 2 The steel shelves are powder coated in black in order to match with the rails. 5 Of course, the mobile shop stands made of a 25 x 25 mm steel tube and their base plates are powder coated in black as well. 2 5 4 4 The angled steel shelf is fixed to the table and thus creates a second display level. 3 The display tables have bended skids made of a 6 mm steel which is black, just like the shop system. 3
p. 0 aluline p. aluline This horizontal product family offers a wide range of products. The rails miniline and aluboard3 as well as 4 different puc solutions. A wide range of accessories in stainless steel with satin finish is available with 2 sizes of back plates: standard and mini. All accessories can be used in the rails and as well in the different puc versions.
p. 2 p. 3 rails Appliance: Horizontal rail and puc system for installation into wood or acrylic glass with a thickness of 6 and 9 mm. miniline wall installation rail 4 mm opening, installed from the side, for light merchandise L 600 cut to size AL 50 00 AL 50 0 Materials and surfaces: Planning details: Centre 32,50 mm aluboard3 wall installation rail 3 mm opening, for direct insert of 3 mm shelves L 600 cut to size AL 030 00 05 AL 030 0 05 The system uses back plates in two different sizes: standard 48 x 53 mm and mini 35 x 35 mm. If not stated otherwise, the standard plate is used. + rail end cap covering the milling contour of aluboard3 rails AL 030 800 07 PP Technical data for installation and drawings are available for download on shop-systems.com. technical data (mm) item no./material
p. 4 p. 5 pucs bracket 2 3 4 2, 2 wall installation puc fitted from rear into milling contour, for panel thickness from 6 mm AL 500 00 AL 500 0 aluminium diecasting, appearance of stainless steel 2 front puc fitted from front into milling contour, with edge protection, for panel thickness from 6 to 9 mm 3 surface puc for front mounting to the wall, with cover plate AL 500 50 AL 500 60 zinc diecasting, appearance of stainless steel AL 500 20 AL 500 30 zinc diecasting, appearance of stainless steel AL 500 06 AL 50 06 zinc diecasting, matt chrome set of two KARO brackets for wooden and glass shelves, 350 400 mm depth, with option to insert a side hanging rail, also possible for centre 625 mm L 320, W 5, H 5 AL 040 200 0 wooden shelf drawing for download under AL 040 600 04 glass shelf drawing for download under AL 040 600 03 2 + side hanging rail Ø 20, L 620 AL 4 6 for insertion into KARO bracket, round tube 4 installation puc square fitted from front into milling contour, screwed at the rear with assembly plate, for panel thickness of 6 and 9 mm, with additional distance plate if used with 6 mm panels AL 040 00 02 zinc diecasting, appearance of stainless steel AL 040 00 06 zinc diecasting, matt chrome + side hanging rail for insertion into KARO bracket, round tube Ø 25, L 240 AL 040 300 0 + distance plate for use of installation puc square in 6 mm panels AL 999 800 3 steel,zinc plated technical data (mm) item no./material technical data (mm) item no./material
p. 6 p. 7 bracket bracket, 2, 2, 2 set of two ZERO brackets for wooden shelves, 350 400 mm depth, with option to insert a side hanging rail L 324, t 3 AL 2 0 35 AL 2 02 35 steel, appearance of stainless steel set of two FARO brackets for wooden and glass shelves, 350 400 mm depth, with option to insert a side hanging rail L 320, W 5, H 30 AL 0 53 32 wooden shelf drawing for download under AL 30 445 6 AL 4 6 glass shelf drawing for download under AL 30 332 62 wooden shelf drawing for download under AL 30 444 6 2 + side hanging rail for insertion into ZERO bracket, round tube Ø 20, L 620 AL 4 6 2 AL 4 5 6 + side hanging rail for insertion into FARO bracket, round tube Ø 20, L 620 AL 4 6 + side hanging rail for insertion into ZERO bracket, rectangular tube L 620, W 5, H 30 AL 4 5 6 + side hanging rail for insertion into FARO bracket, rectangular tube L 620, W 5, H 30 AL 4 5 6 technical data (mm) item no./material technical data (mm) item no./material
p. 8 p. 9 brackets hooks deco supports AL 46 06 2 AL 46 06 22 blister hook with a 35 curved end Ø 6, L AL 46 06 2 AL 463 06 2 AL 46 08 5 blister hook with a 35 curved end Ø 6, L 220 AL 46 06 22 AL 463 06 22 2 set of two insertion brackets for wooden shelves with a minimum thickness of 22 mm Ø 5, L 60 AL 220 25 6 steel, zinc plated wooden shelf drawing for download under AL 30 600 03 5 AL 46 0 20 AL 46 2 25 front hook front hook Ø 8, L 50 Ø 0, L 200 AL 46 08 5 AL 462 08 5 AL 46 0 20 AL 462 0 20 2 2 deco support for 6 mm shelves AL 25 50 05 AL 252 50 05 5 AL 470 320 0 front hook Ø 2, L 250 AL 46 2 25 AL 462 2 25 2 shelf drawing for download under AL 30 342 30 AL 470 320 30 front arm Ø 20, L 00 AL 470 320 0 0 deco support for 8 mm shelves AL 25 502 08 5 front arm Ø 20, L 300 AL 470 320 30 0 AL 432 2 28 AL 040 207 0 shelf drawing for download under AL 080 602 03 2 merchandise arm curved, with 6 pins Ø 2, D 293 AL 432 2 28 AL 433 2 28 5 set of two clamping brackets for 8 mm glass shelves L 52, H 40 AL 040 207 0 0 shelf drawing for download under AL 040 60 03 technical data (mm) item no./material technical data (mm) item no./material
p. 20 p. 2 side hanging frame fittings trays tools side hanging frame round tube Ø 20, L 620, D 320 AL 4 0 6 30 eyewear presenter for single presentation Ø 6, W 96, D 75 AL 040 40 0 shirt tray for front presentation, straight W 300, D 380 AL 36 0 30 2 sign holder for acrylic folders A4 / A5 A5 / A6 AL 040 830 02 AL 040 83 02 AL 040 832 02 AL 040 833 02 shirt tray for front presentation, 30 slanted shoe tray for front presentation, 30 slanted W 300, D 380 AL 36 02 30 W, D 300 AL 35 02 2 2 2 + acrylic folder for sign holder, made of 3 mm acrylic glass, bended A4 A5 A5 A6 ZU 003 80 07 ZU 003 800 07 ZU 003 803 07 ZU 003 802 07 ZU 003 805 07 ZU 003 804 07 acrylic glass shoe tray for side presentation, straight W 300, D AL 35 0 30 2 milling head for aluboard3 and aluboard6 rail contour, for panel thickness of 6 mm and 9 mm, clamping diameter 30 mm, for machining centres and spindle moulding machines AL 0 000 03 shoe tray for side presentation, 8 slanted W 300, D AL 35 02 30 2 milling head for miniline rail contour, shank diameter 8 mm, for machining centres and routing machines AL 0 000 02 technical data (mm) item no./material technical data (mm) item no./material
p. 22 aluline p. 23 aluboard6 aluboard6 the horizontal wall installation rail for direct insert of 6 mm shelves without brackets is now also available in an electrified version. A well engineered plug & light solution for glass and for wooden shelves puts your merchandise on stage. Flat designed tongues on the accessories are almost completely absorbed by the rail. It is still possible to use all aluline accessories in the aluboard6 rail.
p. 24 p. 25 aluboard6 aluboard6 rails AL 060 00 05 aluboard6 wall installation rail 6 mm opening, for direct insert of 6 mm shelves L 600 cut to size AL 060 00 05 AL 060 0 05 AL 060 03 05 + rail end cap covering the milling contour of aluboard6 rails AL 060 820 07 PP Appliance: Horizontal rail system for installation into panels with a thickness of 6 and 9 mm. Materials and surfaces: AL 060 82 07 aluboard6 bright wall installation rail for direct insert of 6 mm shelves, electrified, without power supply cut to size AL 060 03 05 Planning details: Centre 32,50 mm AL 060 822 4 + power feed for electrified rail 24 V, power feed from left into aluboard6, cable length to converter 500 mm, incl. rail end cap AL 060 82 07 The aluboard6 uses an own fitting range which is used with this rail only. The fitting range of aluline can also be used. The overall wattage of each converter needs to be considered. Additional line extensions and distributors as well as differing colour temperatures, glass shelves and LED-lengths are available on request. Non-halogen electrical components are available on request. Technical data for installation and drawings are available for download on shop-systems.com. AL 060 823 4 + LED converter 75 W total power, primary line HV 500 mm with plug-in for distributor, secondary line LV 2000 mm + connecting line HV with 6-position distributor, 230 V, primary line 3000 mm, with Euro flat plug AL 060 822 4 AL 060 823 4 technical data (mm) item no./material
p. 26 p. 27 aluboard6 bright aluboard6 fittings aluboard6 brackets glass shelf with LED lighting 24 V, 9.75 W, 4000 K, clear glass, for insert into electrified aluboard6 L 620, W 400 AL 060 620 03 5 AL 4 0 62 side hanging frame round tube Ø 20, L 620 AL 060 30 0 30 set of two insertion brackets for electrified wooden shelves with a minimum thickness of 22 mm Ø 5, L 60 AL 060 202 steel, zinc plated 5 side hanging frame with prolonged plates, for side presentation under a 6 mm glass shelf if inserted directly into aluboard6 Ø 25, L 620, D 320 AL 4 0 62 wooden shelf drawing for download under AL 060 602 04 glass shelf drawing for download under AL 30 600 02 LED built-in light 24 V, 8.32 W, 4000 K, for wooden shelves, with cable and power pickup, for electrified aluboard6 L 563 AL 060 824 4 AL 060 402 0 blister hook with a 35 curved end L L 220 Ø 6 AL 060 402 0 AL 060 403 0 AL 060 400 0 set of two brackets for wooden and glass shelves, 320-400 mm depth Ø 20, L 300 AL 060 200 0 front arm L 00 L 300 Ø 20 AL 060 400 0 AL 060 40 0 0 AL 060 800 02 wooden shelf drawing for download under AL 060 600 04 glass shelf drawing for download under AL 060 600 03 + side hanging rail for insertion into bracket, round tube Ø 20, L 620 AL 060 300 0 ZU 003 80 07 sign holder for acrylic folders A4 / A5 A5 / A6 AL 060 800 02 AL 060 80 02 AL 060 802 02 AL 060 803 02 set of two insertion brackets for wooden shelves with a minimum thickness of 22 mm Ø 5, L 60 AL 060 20 steel, zinc plated 5 + acrylic folder for sign holder, made of 3 mm acrylic glass, bended A4 A5 A5 A6 ZU 003 80 07 ZU 003 800 07 ZU 003 803 07 ZU 003 802 07 ZU 003 805 07 ZU 003 804 07 acrylic glass wooden shelf drawing for download under AL 060 60 04 AL 0 000 03 milling head for aluboard3 and aluboard6 rail contour, for panel thickness of 6 mm and 9 mm, clamping diameter 30 mm, for machining centres and spindle moulding machines AL 0 000 03 technical data (mm) item no./material technical data (mm) item no./material
p. 28 aluline p. 29 aluboard8 aluboard8 the horizontal wall installation rail for direct insert of 8 mm shelves without brackets is now also available in an electrified version. A well engineered plug & light solution for glass and for wooden shelves puts your merchandise on stage. Flat designed tongues on the accessories are almost completely absorbed by the rail.
p. 30 p. 3 aluboard8 aluboard8 rails AL 080 00 05 aluboard8 wall installation rail 8 mm opening, for direct insert of 8 mm shelves L 600 cut to size AL 080 00 05 AL 080 0 05 + rail end cap covering the milling contour of aluboard8 rails AL 080 800 07 PP Appliance: Horizontal rail system for installation into panels with a thickness of 6 and 9 mm. Materials and surfaces: AL 080 03 05 AL 080 82 07 aluboard8 bright wall installation rail for direct insert of 8 mm shelves, electrified, without power supply cut to size AL 080 03 05 Planning details: Centre 32,50 mm The aluboard8 uses an own fitting range which is used with this rail only. AL 080 822 4 + power feed for electrified rail 24 V, power feed from left into aluboard8, cable length to converter 500 mm, incl. rail end cap AL 080 82 07 The overall wattage of each converter needs to be considered. Additional line extensions and distributors as well as differing colour temperatures, glass shelves and LED-lengths are available on request. Non-halogen electrical components are available on request. Technical data for installation and drawings are available for download on shop-systems.com. AL 080 823 4 + LED converter 75 W total power, primary line HV 500 mm with plug-in for distributor, secondary line LV 2000 mm + connecting line HV with 6-position distributor, 230 V, primary line 3000 mm, with Euro flat plug AL 080 822 4 AL 080 823 4 technical data (mm) item no./material
p. 32 p. 33 aluboard8 bright aluboard8 fittings aluboard8 brackets glass shelf with LED lighting 24 V, 9.75 W, 4000 K, clear glass, for insert into electrified aluboard8 L 620, W 400 AL 080 620 03 5 side hanging frame round tube Ø 20, L 620 AL 080 30 0 AL 080 30 06 30 set of two insertion brackets for electrified wooden shelves with a minimum thickness of 22 mm Ø 5, L 60 AL 080 202 steel, zinc plated 5 front arm Ø 20, L 00 AL 080 400 0 0 wooden shelf drawing for download under AL 080 604 04 AL 080 40 0 AL 080 400 06 LED built-in light 24 V, 8.32 W, 4000 K, for wooden shelves, with cable and power pickup, for electrified aluboard8 L 563 AL 080 824 4 AL 080 800 02 front arm Ø 20, L 300 AL 080 40 0 AL 080 40 06 0 set of two brackets for wooden and glass shelves, 320 400 mm depth Ø 20, L 300 AL 080 200 0 AL 080 200 06 sign holder for acrylic folders A4 / A5 A5 / A6 AL 080 800 02 AL 080 80 02 AL 080 802 02 AL 080 803 02 wooden shelf drawing for download under AL 080 60 04 glass shelf drawing for download under AL 080 60 03 A4 / A5 A5 / A6 AL 080 800 06 AL 080 80 06 AL 080 802 06 AL 080 803 06 + side hanging rail for insertion into bracket, round tube set of two insertion brackets for wooden shelves with a minimum thickness of 22 mm Ø 20, L 620 AL 080 300 0 AL 080 300 06 Ø 5, L 60 AL 080 20 steel, zinc plated 5 ZU 003 80 07 + acrylic folder for sign holder, made of 3 mm acrylic glass, bended A4 A5 A5 A6 ZU 003 80 07 ZU 003 800 07 ZU 003 803 07 ZU 003 802 07 ZU 003 805 07 ZU 003 804 07 acrylic glass wooden shelf drawing for download under AL 080 603 04 technical data (mm) item no./material technical data (mm) item no./material