SIDE-ARM MOUNT AERODOME PARKING/ROADWAY (TYPE III) AVV30-20 Lampholder Optic Housing Seamless, die-cast aluminum Reflector Segmented aluminum sheet with highly efficient finishes Lamp Lens High impact, clear tempered glass Tool-less Entry Ignitor (Where Required) Thermal Chimney Allows free air flow between optic housing and side-arm housing 19.7" (501 mm) 28.8" (733 mm) Recessed Handle Side-Arm Cover/Gear Tray Seamless, die-cast aluminum 6.4" (164 mm) Capacitor Ballast 12.0" (305 mm) Side-Arm Housing Seamless, die-cast aluminum Patented Hinge Assembly Lens Frame Die-cast aluminum door frame secures lens; sealed with silicone gasket SPEC # WATTAGE CATALOG # PULSE START METAL HALIDE 150W PSMH AVV3(c)615-(a)(b) 250W PSMH AVV3(c)625-(a)(b) 320W PSMH 350W PSMH AVV3(c)632-(a)(b) AVV3(c)635-(a)(b) 400W PSMH AVV3(c)640-(a)(b) METAL HALIDE 175W MH AVV3(c)417-(a)(b) 250W MH AVV3(c)425-(a)(b) 400W MH AVV3(c)440-(a)(b) HIGH PRESSURE SODIUM 150W HPS AVV3(c)515-(a)(b) 250W HPS AVV3(c)525-(a)(b) 400W HPS AVV3(c)540-(a)(b) Specify (a) Voltage, (b) Options & (c) Mounting/Rotatable Optics. Reduced envelope lamp; ED28 for 320 400W PSMH & 400W MH. \ (a) VOLTAGE SUFFIX KEY D 120/277V M 120/208/240/277V (Standard) T 120/277/347V (Canada Only) 1 120V 2 277V 27 277V Reactor (PSMH Only) 3 208V 4 240V 5 480V 6 347V (Canada Only) For voltage availability outside the US and Canada, see Bulletin TD-9 or contact your Ruud Lighting authorized International Distributor. (b) OPTIONS (factory-installed) -(a)f Fusing -(a)p -5P External Photocell (for 480V) Specify (a) Single Voltage See Voltage Suffix Key O L R \ (c) MOUNTING/ROTATABLE OPTICS Standard Configuration Rotated Left of Standard Configuration Rotated Right of Standard Configuration Type III & Frontline Type IV Main Beam L L 0 Main Beam R Top View Main Beam R GENERAL DESCRIPTION Parking lot and roadway full cutoff luminaire for HID lamp, totally enclosed. Housing is seamless, die-cast aluminum. Electrical components are heat-sinked and contained in mounting arm assembly (direct mount configuration). Lens assembly consists of tool-less quick release frame constructed of rigid aluminum and highimpact, clear-tempered glass lens. Hightemperature silicone gasket seals lens from water and insects. FINISH Exclusive DeltaGuard finish features an E-coat epoxy primer with medium bronze ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. The finish is covered by our sevenyear limited warranty. ELECTRICAL Fixture includes clear, mogul-base lamp. 320 400W PSMH and 400W MH utilize the ED28 reduced envelope lamp. Pulse-rated porcelain enclosed, 4kv rated screw-shell-type lampholder with spring-loaded center contact. Lamp ignitor included where required. All ballast assemblies are high-power factor and use the following circuit type: Reactor (277V PSMH) 150 400W PSMH CWA Constant Wattage Autotransformer 150 400W PSMH; 175 400W MH; 150 400W HPS LABELS ANSI lamp wattage label supplied, visible during relamping. UL Listed in US and Canada for wet locations. PATENTS US 4,689,729; D531,882; Canada 108888; Other Patents Pending ACCESSORIES: (field-installed) AVRP-3 Round Pole Adaptor (fits 3" 6" dia. pole) SBL-AVV20C External Full-Cutoff Shield SBL-AVV20E External Backlight Shield Ruud Lighting Inc. Printed in USA www.ruudlighting.com 01/23/08
AVV30-20 SIDE-ARM MOUNT AERODOME PARKING/ROADWAY (TYPE III) Isofootcandle plots show initial footcandles at grade. (Footcandles 0.0929 = Lux) 150 180 150 120 120 90 90 60 30 6475 12950 19425 25900 60 30 120' 100' 80' 140' 40' 20' 0' 20' 40' 80' 100' 120' 42.7 120' 36.6 100' 30.5 80' 0.3 24.4 0.5 1 40' 3 12.2 20' 6.1 5 0' 0 m 20' 40' 36.6 30.5 24.4 12.2 6.1 0 m 6.1 12.2 24.4 30.5 36.6 6.1 12.2 Lighting Sciences Inc. Certified Test Report No. LSI 23054 Candlepower distribution curve of 400W PSMH AeroDome Light. Isofootcandle plot of 400W PSMH AeroDome Light at 25' (7.6 m) mounting height. (Plan view) Ruud Lighting Inc. Printed in USA www.ruudlighting.com 01/23/08
DIRECT MOUNT 12" FULL CUTOFF WALL PACK GWC0-12 Lens Assembly Rigid die-cast copper-free aluminum and flat glass lens Ballast Pivoting Hinges Capacitor 12.3" (313 mm) 6.5" (165 mm) + + + 3.4" (86 mm) 11.6" (294 mm) 12.0" (304 mm) Wiring Compartment Ignitor (Where required) Lampholder Housing Die-cast aluminum Lamp (Included) Reflector Precision aluminum 8.2" (208 mm) SPEC # WATTAGE CATALOG # PULSE START METAL HALIDE 125W PSMH MGWC0612-(a)(b) 150W PSMH MGWC0615-(a)(b) METAL HALIDE 50W MH MGWC0405-(a)(b) 70W MH MGWC0407-(a)(b) 100W MH MGWC0410-(a)(b) 175W MH MGWC0417-(a)(b) HIGH PRESSURE SODIUM 35W HPS MGWC0503-(a)(b) 50W HPS MGWC0505-(a)(b) 70W HPS MGWC0507-(a)(b) 100W HPS MGWC0510-(a)(b) 150W HPS MGWC0515-(a)(b) Specify (a) Voltage & (b) Options. GENERAL DESCRIPTION Full Cutoff Wall Pack fixture for HID lamp, totally enclosed. Housing is seamless copper-free diecast aluminum. Lens assembly consists of a hinged, rigid die-cast copper-free aluminum frame and clear borosilicate glass lens held securely inside. Lens frame is easily removable and allows for easy attachment and serviceability using top pivoting hinge. Complete silicone gasketing around lens and gasketing at mounting provide a watertight seal. A precision specular aluminum reflector provides forward throw with wide distribution to ensure wide fixture spacings and maximum light levels. Fixture design provides excellent IES Full Cutoff light distribution without glare. The optical chamber is sealed to reduce dirt and insect contamination. Furnished with e-coated, copper-free, lightweight mounting box designed for installation over standard 4-inch square or octagonal and single-gang J boxes and for conduit entry from top, sides and rear. Designed and approved for easy through-wiring. All fixtures use vertical-lamp position. (a) VOLTAGE SUFFIX KEY D 120/277V (Standard: 125W PSMH; 50 100W MH; 50W HPS) M 120/208/240/277V (Standard: 150W PSMH; 175W MH; 70 150W HPS) T 120/277/347V (Canada Only) (Standard: 150W PSMH; 70 175W MH; 70 150W HPS) 1 120V (Standard: 35W HPS) 2 277V 27 277V Reactor (150W PSMH Only) 3 208V 4 240V 5 480V (175W MH; 70 150W HPS) 6 347V (Canada Only) For voltage availability outside the US and Canada, see Bulletin TD-9 or contact your Ruud Lighting authorized International Distributor. ELECTRICAL Fixture includes clear, medium-base lamp. Pulse-rated porcelain enclosed, 4kv-rated screwshell-type lampholder. Lamp ignitor included where required. Fixtures require a minimum 90 C temperature feed wire. All ballast assemblies are high-power factor and use the following circuit types: Reactor (277V PSMH) 150W PSMH Reactor 120V: 35 150W HPS HX High Reactance 50 100W MH; 50 150W HPS CWA Constant Wattage Autotransformer 125 & 150W PSMH; 175W MH LABELS ANSI lamp wattage label supplied, visible during relamping. UL Listed in the US and Canada for wet locations. -(a)f -(a)p Q (b) OPTIONS (factory-installed) Fusing Quartz Standby (includes 100W quartz lamp) (N/A on 277V Reactor) Specify (a) Single Voltage See Voltage Suffix Key FINISH Exclusive Colorfast DeltaGuard finish features an E-coat epoxy primer with medium bronze ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. The finish is covered by our seven-year limited warranty. PATENTS 6,867,959 and Patents Pending. PC-1 PC-2 PC*6 ACCESSORIES (for fixtures set to 120V) (for fixtures set to 208, 240, 277V) (for fixtures set to 347V) Ruud Lighting Inc. Printed in USA www.ruudlighting.com 08/03/06
GWCO-12 DIRECT MOUNT 12" FULL CUTOFF WALL PACK Isofootcandle plots show initial footcandles at grade. (Footcandles 0.0929 = Lux) 180 150 120 45' 30' 15' 0 15' 30' 45' 45' 13.7 30'.3.5 1 9.1 90 15' 3 5 4.6 1600 3200 4800 6400 30 60 0' 13.7 9.1 4.6 0 m 4.6 9.1 13.7 Isofootcandle plot of one 175W MH 12" AeroDome Full Cutoff Wall Pack at 15' (4.6 m) mounting height (plan view). 0 m Candlepower Distribution Curve of 175W MH 12" AeroDome Full Cutoff Wall Pack. Ruud Lighting, Inc. Printed in USA www.ruudlighting.com 08/03/06