VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series High Voltage, Input Rectifier Diode, A TO-22 FULL-PAK PRODUCT SUMMARY Base cathode 3 Cathode Anode Package TO-22FP I F(AV) A V R 8 V to 2 V V F at I F. V I FSM 6 A T J max. 5 C Diode variation Single die FEATURES Very low forward voltage drop 5 C max. operating junction temperature Designed and qualified according to JEDEC-JESD47 Fully isolated package (V INS = 25 V RMS ) UL E78996 approved Material categorization: For definitions of compliance please see www.vishay.com/doc?9992 Available APPLICATIONS Input rectification switches and output rectifiers which are available in identical package outlines DESCRIPTION High voltage rectifiers optimized for very low forward voltage drop with moderate leakage. These devices are intended for use in main rectification (single or three phase bridge). OUTPUT CURRENT IN TYPICAL APPLICATIONS APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE UNITS Capacitive input filter T A = 55 C, T J = 25 C common heatsink of C/W 2. 6. A MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I F(AV) Sinusoidal waveform A V RRM Range 8/2 V I FSM 6 A V F A, T J = 25 C. V T J - 4 to 5 C VOLTAGE RATINGS PART NUMBER V RRM, MAXIMUM PEAK REVERSE VOLTAGE V V RSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V VS-ETS8FPPbF, VS-ETS8FP-M3 8 9 VS-ETS2FPPbF, VS-ETS2FP-M3 2 3 I RRM AT 5 C ma.5 Revision: 8-Jun-3 Document Number: 94335 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current I F(AV) T C = 5 C, 8 conduction half sine wave Maximum peak one cycle ms sine pulse, rated V RRM applied 35 A I FSM non-repetitive surge current ms sine pulse, no voltage reapplied 6 ms sine pulse, rated V RRM applied 9 Maximum I 2 t for fusing I 2 t ms sine pulse, no voltage reapplied 3 A 2 s Maximum I 2 t for fusing I 2 t t =. ms to ms, no voltage reapplied 3 A 2 s ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum forward voltage drop V FM A, T J = 25 C. V Forward slope resistance r t 2 m T J = 5 C Threshold voltage V F(TO).82 V T J = 25 C.5 Maximum reverse leakage current I RM V R = Rated V RRM T J = 5 C.5 ma THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction and storage temperature range T J, T Stg - 4 to 5 C Maximum thermal resistance, junction to case R thjc DC operation 2.5 Maximum thermal resistance, junction to ambient Typical thermal resistance, case to heatsink Approximate weight Mounting torque Marking device R thja 62 R thcs Mounting surface, smooth and greased.5 C/W 2 g.7 oz. minimum 6 (5) kgf cm maximum 2 () (lbf in) Case style TO-22 FULL-PAK (94/V) ETS8FP ETS2FP Revision: 8-Jun-3 2 Document Number: 94335 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series Maximum Allowable Case Temperature ( C) 5 4 3 2 9 8 3 VS-ETS.. Series R thjc (DC) = 2.5 C/W 6 9 Conduction angle 2 8 2 4 6 8 2 Maximum Average Forward Power Loss (W) 2 8 6 4 2 8 6 4 2 DC 8 2 9 6 3 RMS limit Conduction period VS-ETS.. Series T J = 5 C 2 4 6 8 2 4 6 Fig. - Current Rating Characteristics Fig. 4 - Forward Power Loss Characteristics Maximum Allowable Case Temperature ( C) 5 4 3 2 9 3 6 VS-ETS.. Series R thjc (DC) = 2.5 C/W 9 2 Conduction period 8 DC 2 4 6 8 2 4 6 8 Peak Half Sine Wave Forward Current (A) 5 4 At any rated load condition and with rated Vrrm applied following surge. 3 Initial Tj = 5 C 2 at 6 Hz.83s at 5 Hz.s 9 8 7 6 5 VS-ETS..S Series 4 3 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 2 - Current Rating Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average Forward Power Loss (W) 6 4 2 8 6 4 2 8 2 9 6 3 RMS limit Conduction angle VS-ETS.. Series T J = 5 C 2 4 6 8 Peak Half Sine Wave Forward Current (A) 7 5 3 9 7 5 3 Maximum non-repetitive surge current versus pulse train duration. Initial Tj = Tj max. No voltage reapplied Rated Vrrm reapplied VS-ETS..S Series.. Pulse Train Duration (s) Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current Revision: 8-Jun-3 3 Document Number: 94335 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series Instantaneous Forward Current (A) T J = 25 C T J = 5 C VS-ETS.. Series.5..5 2. 2.5 3. Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Z thjc - Transient Thermal Impedance ( C/W) Single pulse D =.5 D =.33 D =.25 D =.7 D =.8 Steady state value (DC operation) VS-ETS.. Series..... Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance Z thjc Characteristics Revision: 8-Jun-3 4 Document Number: 94335 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
ORDERING INFORMATION TABLE VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series Device code VS- E T S 2 FP PbF 2 3 4 5 6 7 8 2 3 4 5 6 7 8 - product - Current rating ( = A) - Circuit configuration: - Package: - Type of silicon: - Voltage rating - - E = Single diode T = TO-22 S = Standard recovery rectifier FULL-PAK 8 = 8 V 2 = 2 V Environmental digit: PbF = Lead (Pb)-free and RoHS compliant -M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-ETS8FPPbF 5 Antistatic plastic tubes VS-ETS8FP-M3 5 Antistatic plastic tubes VS-ETS2FPPbF 5 Antistatic plastic tubes VS-ETS2FP-M3 5 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information TO-22FP PbF TO-22FP -M3 www.vishay.com/doc?955 www.vishay.com/doc?959 www.vishay.com/doc?9544 Revision: 8-Jun-3 5 Document Number: 94335 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Outline Dimensions DIMENSIONS in millimeters.6.4 Hole 3.4 3. 2.8 2.6 3.7 3.2 7.3 6.9 6.4 5.4 6. 5.8 3.3 3. 3.56 3.5 R.7 (2 places) R.5 2.54 TYP..9.7 2.54 TYP. 4.8 4.6.6.38 2.85 2.65 Lead assignments Diodes + 2 - Cathode 3 - Anode.4.3.5.5 TYP. 5 ±.5 5 ±.5 Conforms to JEDEC outline TO-22 FULL-PAK Revision: 2-Jul- Document Number: 955 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC 6249-2-2 definition. We confirm that all the products identified as being compliant to IEC 6249-2-2 conform to JEDEC JS79A standards. Revision: 2-Oct-2 Document Number: 9