OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers Military Communication Equipment Digital Switching Frequency Stabilities 1 (AT-Cut Crystal-Standard) vs. operating temperature range (referenced to +25 C) Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year vs. aging/year (following years) -50-200 -0.3-2 -500-250 +50 0 +150 +200 +0.3 +2 +500 +250 0 to +70 C -20 to +70 C -40 to +70 C -40 to +85 C at time of shipment, nominal EFC V S ±5% static Load ±5% static Warm-up time 5 minutes to ±100 of final frequency (1 hour reading) @ +25 C vs. operating temperature range (referenced to +25 C) Initial tolerance vs. supply voltage change vs. load change vs. aging/day vs. aging/1st year vs. aging/year (following years) Frequency Stabilities 1 (SC-Cut Crystal-Option) -20-25 -30-5 -5-1 -50 Performance Specifications +20 +25 +30 0 +5 +5 +1 0 +50 0 to +70 C -20 to +70 C -40 to +70 C -40 to +85 C at time of shipment, nominal EFC V S ±5% static Load ±5% static Warm-up time 5 minutes to ±10 of final frequency (1 hour reading) @ +25 C
Performance Specifications Supply Voltage (Vs) Supply Voltage 3.135 3.3 3.465 Supply Voltage 4.75 5.0 5.25 Supply Voltage 11.4 12.0 12.6 Power Consumption Signal [Standard] 3.0 1.0 RF Output HCMOS Watts Watts Load 15 pf Signal Level (Vol) Signal Level (Voh) 2.4 3.5 0.4 0.5 during warm-up steady state @ +25 C with Vs=3.3V and 15 pf Load with Vs=5V & 12V and 15 pf Load with Vs=3.3V and 15 pf Load with Vs=5V & 12V and 15 pf Load Duty Cycle 45 55 % @ (Voh-Vol)/2 Signal Sinewave Load 50 Ohms Output Power +2.0 +5.0 +5.0 +8.0 +8.0 +11.0 dbm dbm with Vs=3.3V and 50 Ohm load with Vs=5V & 12V and 50 Ohm load Harmonics -30 dbc 50 Ohm load Tuning Slope Tuning Range ±3.0 ±0.75 Frequency Tuning (EFC) Fixed OCXO; No adjust ±8.0 ±2.0 Linearity 10 % Tuning Slope Control Voltage Range Reference Voltage Phase Noise 3 Phase Noise 3 0.0 0.0 2.75 3.92 4.9 1.4 2.0 Positive 2.8 4.0 Reference Voltage Output (VRef) 2.8 4.0 5.0 2.85 4.08 5.1 Additional Parameters -90-120 -140-145 -75-130 -140 Weight 14 g 1 Hz 10 Hz 100 Hz 1 khz 10 khz 1 Hz 10 Hz 100 Hz 1 khz 10 khz with AT cut crystal with SC cut crystal with Vs=3.3V with Vs=5V & 12V with Vs=3.3V with Vs=5V with Vs=12V @ 10MHz with SC cut @ 10MHz with AT cut Supply Voltage (Vs) Absolute Maximum Ratings Output Load 50 pf Operable Temperature Range -55 +85 C Storage Temperature Range -55 +125 C 6.5 15 V V with Vs=3.3V & 5V with Vs=12V
Outline Drawing / Enclosure OX-200 Code Height H Pin Length L Min 0 10.4 6.2 1 12.7 6.2 2 13.4 6.2 Pin Connections 1 RF Output 2 Ground (Case) 3 Electronic Frequency Control Input (EFC) 4 Reference Voltage Option 5 Supply Voltage Input (VS)
Standard Shipping Method Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P Type B 44 33.3 250 34 Type C 44 33.3 250 34 Recommended Reflow Profile
Ordering Information OX - 200 0 - D A E - 258 0-10M0000000 Product Family OX: OCXO Package THT version: 200 Height 0: 10.4 mm 1: 12.7 mm 2: 13.4 mm Supply Voltage B: +12V D: +5V E: +3.3V Stability Code 108: ±10 208: ±20 258: ±25 308: ±30 508: ±50 107: ±100 Frequency Frequency Control 0: No Tuning 1: ±0.75 to ±2.0 (SC) 2: ±3.0 to ±8.0 (AT) RF Output Code A: HCMOS E: Sinewave Temperature Range E: -40 C to +85 C J: -20 C to +70 C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25 C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: 267 Lowell Road, Suite 102 Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2-18-14 jar