Double Bar Plate Dowels for Saw-Cut Contraction Joints

Similar documents
PD 3 Dowel Cradle. Load Transfer System Industrial Slab on Ground

PERFORM WITH PRECISION WELDED DOWEL ASSEMBLY LOAD TRANSFER PRODUCTS CONCRETE CONSTRUCTION SOLUTIONS BROCHURE

R&T UPDATE. An Alternative to Traditional Round Dowel Bars Plate Dowel Innovations Driven by Industrial Concrete Paving

SECTION CONCRETE REINFORCEMENT FOR STEAM UTILITY DISTRIBUTION

Dowel. Design. Performance-Based World of Concrete Official Show Issue. Lift-truck design changes require a new look at joint durability

Diamond Dowel. Load Transfer System INDUSTRIAL SLAB ON GROUND

Hyper ArmourMate. Joint Edge Protection INDUSTRIAL SLAB ON GROUND

Dowels for the 21st Century

Plate Dowels. An Innovation Driven by Industrial Concrete Paving. Introduction

Section 914. JOINT AND WATERPROOFING MATERIALS

A. Extent of structural precast concrete work is shown on drawings and in schedules.

Initiating Cracks in PCC Pavements. Malcolm K. Lim, PE

Flanged Dowel Box. Load Transfer System INDUSTRIAL SLAB ON GROUND

A Solution to Cracking and Stresses Caused by Dowels and Tie Bars

AMENDMENTS Manual of STANDARD SPECIFICATIONS. Adopted by Standard Specifications Committee. Amendment. No. 6. Published by

TECHNICAL MANUAL. TERADOWEL and ULTRADOWEL. Reliable Dowel System for Floor Joints

TECHNICAL MANUAL. OPTIMAJOINT Free Movement Joint. Free Movement Joint System for Heavy Traffic

Precast Bendable Concrete Paving Slab for Speedy Road Construction

4.1. Foremen 4.2. Concrete plant manager 4.3. Concrete plant operator 4.4. Personnel performing saw cutting and joint sealing

Plate 60 ArmourMate. Joint Edge Protection INDUSTRIAL SLAB ON GROUND. Plate 60 AmourMate. Joint Edge Protection

SECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section

Dowel Basket Standardization

PCCP Preservation Steps to Take to Extend Pavement Life and Performance of Your Concrete Pavements

Why Do We Saw Equipment Types Matching Equipment to the Project Blade Selection Ensuring Construction Quality When Things Don t Go Right The Sawing

Corrosion-Resistant Coated Dowel Bars

Mission Statement. State Steel strives to provide quality products and services at competitive

Total precast solution for large stadium projects meet tight schedule

SUBMITTAL SHEET. Project Submittals by

B. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.

10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS

SECTION BULLET- RESISTANT DOORS

INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls

Design and Construction of Highway Pavement Joint Systems

Session 8: Load Transfer Restoration. (Dowel Bar Retrofit, Cross-Stitching, and Slot Stitching)

1. CONNOLLY KEYJOINT 1. PRODUCT NAME 2. SUPPLIER 3. PRODUCT DESCRIPTION 4. KEY FEATURES 5. FIXING INSTRUCTIONS 6. SPECIFICATIONS 7.

Glass Fiber Reinforced Polymer (GFRP) Dowel Bars - Aslan 600

TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018

Product Guide Specification

Basket & Screen Data. Cylindrical baskets for simplex and duplex strainers up to 8" size

ROUND STEEL POLE STRAIGHT

The Redi-Flange Method. How It Works. Services. Engineering & Costing Assistance

Frequently asked questions about our armoured joint with disruptive face technology.

Evaluation of In-Pavement Light Fixture Designs and Performance

B. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.

SECTION ARCHITECTURAL PRECAST CONCRETE

Table 5G-2.01: Transverse Joint Requirements. Transverse Joint Type 6 C 12 7 C 15 8 CD CD CD 1 20

PD 3 POD PRODUCT CATALOGUE. Load Transfer and Floor Joint Systems. New Zealand. July 2016 Issue. DIAMOND DOWEL PD3 DOWEL CRADLE

OHIO DEPARTMENT OF TRANSPORTATION CENTRAL OFFICE, 1980 W. BROAD ST., COLUMBUS, OHIO

Design and Construction of Highway Pavement Joint Systems

ASLAN 600 GLASS FIBER REINFORCED POLYMER (GFRP) DOWEL BARS FOR LOAD TRANSFER IN CONCRETE SLABS

prepared by Tom Burnham, Co-Chair Minnesota Department of Transportation Mark B. Snyder, Co-Chair Engineering Consultant for National Concrete

ABCDE. TechBrief. Best Practices for Dowel Placement Tolerances

IGGA Guide Specification: Dowel Bar Retrofit (DBR) Introduction

Design and Construction of Highway Pavement Joint Systems

SECTION ARCHITECTURAL PRECAST CONCRETE PART 1 - GENERAL

CITY OF PITTSBURG ENGINEERING DEPARTMENT CONTRACT NO A WATER TREATEMENT PLANT CAPITAL IMPROVEMENTS PHASE 1A ADDENDUM #1 FENCE AND DITCH AUGUST

SECTION HOLLOW METAL DOORS AND FRAMES

Technical Note No. 026

GENERAL ISOMETRIC LAYOUT

KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 2007 EDITION

World Class Fabrication and Machining Parts to Finished Assemblies

Technical Note No. 028

Woven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.

² TL Beton-StB 07 = German technical conditions for construction materials for concrete road pavements

SQUARE STEEL POLE STRAIGHT

Laser cutting Lamination stacking, welding, and bonding C-5 Coating Finger plates Inspection. A Reliable Resource for Your Business

Multi-Institutional Academic Health Science & Research Center Evansville, IN

SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS

Product Guide Specification

Dowel Bar Alignment and Location for Placement by Mechanical Dowel Bar Insertion

SECTION 39 - MANHOLES TABLE OF CONTENTS

Chapter VI Vessel Supports

LaserSnake Development of Multi-Skin Cutting Techniques Phase 1: Preliminary Study Deliverable D3.29 TWI

Profiting with Wire EDM

Glulam Connection Details

MISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION

American Safe Room. Explosion Resistant Blast Hatch with Integrated Riser

EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL

ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials

Large Scale CalArc Pavers for Sand-Set Pedestrian Use Installations

SECTION METAL FABRICATIONS

FRANK. Technologies for the construction industry. Egcodubel Shear force dowel for low and middle loads

SPECIFICATIONS FOR THE MANUFACTURE AND DESIGN OF PRECAST THREE SIDED ARCH STRUCTURES, WINGWALLS AND HEADWALLS

1. Architectural precast concrete cladding units.

1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.

Research A PERFORMANCE TESTING OF EXPERIMENTAL DOWEL BAR RETROFIT DESIGNS PART 1 INITIAL TESTING. Final Report

In-line measurements of rolling stock macro-geometry

JVI Vector Connector

Heavy-Duty Steel Bar Grating

5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.

LYON INDUSTRIES. Since 1968

Unlabeled Bulk Packed Products for OEM Accounts

Design and Construction Standards SECTION ATHLETIC LOCKERS

ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE

SUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH

SSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING

Dowel Load Transfer Systems Their Evolution and Current Innovations for Sustainable Pavements

D. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC

Innovative composite dowel for steel concrete composite bridges. Neil Westmacott, Wolfram Schwarz

Through and through, our metal frames stand strong.

Transcription:

Double Bar Plate Dowels for Saw-Cut Contraction Joints Designed to Deliver More Serviceable Slabs Concrete slabs-on-ground must be able to withstand the repetitious, concentrated loads and abrasion of wheeled traffic at the weakest point the joints. The W Basket assembly used in the strategic reinforcement design helps you reliably deliver a serviceable slab in a competitive environment. Utilizing McTech s unique Single wire, double bar plate and compressible center geometry and a factory applied debonding agent, the W basket assembly helps you: Collect your retainage Reduce your call backs and save labor Optimize the amount of steel in a project Limit your liability Deliver cost-effective slabs-on-ground With the unique W basket shape of the dowel support frame, EZbasket W will have a greatly reduced carbon footprint as compared to many other dowel baskets currently on the market EZbasket W the most sustainable basket. Superior Engineering for Optimal Joint Performance Limits differential deflection across joints to minimize joint spalling Allows the slab to move horizontally in both directions Minimizes restraint due to horizontal shrinkage Provides an increased bearing area at the joints, reducing bearing stresses Is a more efficient use of steel when used in the strategic reinforcement design Provides an eight- or four-inch saw-cut construction tolerance Single wire design strong and efficient. Double bars with compressible center. Provides immediate vertical load transfer with a thinly and evenly factory-applied debonding agent Performance Based Dowel Design Fast, Simple Installation Requires fewer man hours for installation than conventional methods Easy to handle can be carried and installed by one person during concrete placement Allows for sub-grade leveling after installation to prevent rutting, restraint and cracking Construction tolerances allow for misalignment without causing restraint in the panels Eliminates obstacles for the laser screed Fully welded assemblies, offering stable dowel support during installation Unique shape allows more baskets per truckload Bundled and shipped on skids, for easy handling Shipping wires do not have to be cut during placement* Custom and stock baskets are available through our national distribution network In areas subjected to wheeled traffic, heavy loads or both, joints with dowels are recommended. ACI 360R-06

Double Bar Plate Dowels for Saw-Cut Contraction Joints W EZbasket Specification All EZbasket products will be supplied by McTech Group Inc.. Plate Dowels will be cut from hot rolled plate per ASTM A36 to within 0.010" of specified length. Side frame supports will be fabricated from 1/4 diameter cold drawn wire per ASTM A108 grade 1010-1020. Plate Dowels will be welded (on one end only) into the side frames, with the welds alternating along the length of the assembly. Specially designed elastomer with compressible material will be fitted between the Plate Dowels and should extend to within plus or minus 0.1875" of 2/3 the bar length. Eight gauge wires will be welded across the side frames at approximately 3 o/c to keep the assembly stable during shipping and installation or as needed. The finished assembly will hold the Plate Dowels to within plus or minus 1/8" of the required slab placement depth. The assemblies will be manufactured so that they stack on top of each other for transportation and remain stable under concrete placement.

Dowel Groups Maximum Load per Axle (lbs) Dowel plate spacing / load spacing Slab thickness Dowel thickness (in) Maximum Single Point Load 18 / 24 24 / 24 18 / 36 24 / 36 4 0.2500 7634 8378 9980 5634 6592 7492 9136 10689 12148 7294 8534 9698 5 0.2500 7164 8382 9525 5532 6472 7355 7634 8982 10151 8220 9618 10931 6 0.2500 8801 10297 11703 6638 7767 8827 10502 12882 13967 7952 9304 11033 7 0.2500 0.5000 4497 9078 10621 12070 14760 7349 8599 9772 11949 9415 11016 12519 15309 8818 10317 11725 14337 8 0.3785 0.5000 0.7500 4497 5963 12240 15187 20137 10301 13042 16702 12949 15835 20996 12328 15075 19988 10 0.3785 0.5000 0.7500 4497 5963 14332 17526 23238 11390 13928 18467 16363 20009 26529 12045 14729 19529

Dowel Baskets ACI 360