User Guide Insignia Narrator - Advanced Tabletop Sound System with HD Radio Receiver NS-CLHD01

User Guide Insignia Narrator - Advanced Tabletop Sound System with HD Radio Receiver NS-CLHD01

Insignia Narrator - Advanced Tabletop Sound System with HD Contents Introduction....................................... 3 Important safety instructions........................ 3 Features........................................... 4 Setting up your radio............................... 14 Using the clock and alarm........................... 15 Using your radio................................... 21 Using the menu................................... 33 Troubleshooting................................... 45 Specifications..................................... 46 Legal notices...................................... 46 90-day limited warranty............................ 49 2

Insignia Narrator Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-CLHD01 represents the state of the art in HD Radio design and is designed for reliable and trouble-free performance. Important safety instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 3

NS-CLHD01 10 Only use attachments/accessories specified by the manufacturer. 11 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 12 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it. Additional safety information Features Do not leave your radio in temperatures above 104 F (40 C), such as in a sauna or a parked car. Using earphones or headphones for an extended time may cause serious damage to your hearing. If you are exposed to sound louder than 85dB for extended time, you may adversely affect your hearing. The louder the sound is, the more seriously damaged your hearing may be (an ordinary conversation is between 50dB to 60dB and road noise is approximately 80dB). You are strongly advised to set the volume level to medium (the medium level is usually less than 2/3 of the maximum). If you hear a ringing in your ear(s), lower the volume or stop using the earphones or headphones. Do not place your radio near magnetic objects. HD Radio Table Top Clock Receiver Crystal clear, digital stereo for AM & FM HD Radio Unlimited station presets 10 bookmarks Multicast Stations (HD2/HD3) and PSD 4

Insignia Narrator Artist Experience image display Automatic blending for Analog and Digital Signal Digital time display - Dual Alarm/Snooze Accessible mode with Voice prompt/feedback on button press for visually impaired users Aux input/headphone output Jack International frequency tuning: FM: 200kHz, 100kHz, 50kHz AM: 10kHz and 9kHz 2.4 TFT LCD display (320 x 240 QVGA) 4 speaker (2) Package contents HD Radio table top receiver FM dipole antenna AM loop antenna AC adapter User Guide Quick Setup Guide CD for voice recording of user guide 5

NS-CLHD01 Front # Item Description 1 LCD Radio display screen. 2 Headphone Plug headphones into this jack. jack 3 MENU Press to open or close the menu system. In the menu system, press to close a sub-menu. 4 SEL Press to select menu options or save the settings. 5 SEEK / SEEK In radio mode, press SEEK to go to the next lower or higher station. For more information, see Manually tuning to a frequency on page 30. In menu mode, press to scroll down or up. 6 DISP Press to switch between PG (Program Guide) mode and AE (Artist Experience) mode in HD Radio mode. For more information, see "Viewing the program guide (PG) in HD Radio mode" on page 32. 7 B) In HD Radio mode, press to bookmark the current audio selection. In menu mode, press to delete a bookmark. 6

Insignia Narrator # Item Description 8 CH /CH Press to tune to the next lower or higher frequency. In time and alarm set mode, press to adjust the hours up or down. 9 PS /PS Press to go to the next lower or higher preset station. Press and hold PS to set a preset. Press and hold PS to clear a preset. For more information, see Setting a preset station on page 31. In time and alarm set mode, press to adjust the minutes up or down. 10 Reset If your radio stops responding to button presses, press this button to reset your radio. 7

NS-CLHD01 Top # Item Description 1 (power) Press to turn your radio on or off. For more information, see Turning your radio on or off on page 24. In clock mode, press and hold SEL + Power together to switch between normal mode and accessible mode for visually impaired users. 2 SRC Press repeatedly to cycle through the available sound sources (AM>FM>AUX-IN). 3 AL1/AL2 In clock mode, press to set Alarm 1 or 2. Press and hold to open the Alarm Set menu. For more information, see "Setting the alarm" on page 18. 4 VOL / Press to lower or raise the volume. VOL 5 SNOOZE Press to turn off the alarm temporarily for a designated interval. See Setting the alarm on page 18. 8

Insignia Narrator Back and Bottom # Item Description 1 12V DC Connect the AC adapter (provided) to this jack. 2 AUX IN Connect an external sound source to this jack. 3 Battery compartment Install four (4) AA size alkaline batteries in this compartment for clock backup. See Installing the batteries on page 14. 4 FM Ant. Connect an FM dipole antenna to this jack. 5 AM Ant. Connect an AM loop antenna to this jack. 9

NS-CLHD01 LCD information Table clock modes 12-hour type display 24-hour type display 10 1 Alarm 2 status indicator 2 Alarm 1 status indicator 3 Backup battery status indicator 4 Current time

Insignia Narrator Analog radio mode 1 Signal strength 2 AM/FM indicator 3 Stereo/Mono indicator 4 Preset indicator 5 Current time 6 Backup battery status indicator 7 Seek type 8 Frequency selected (digital) 9 Frequency bar (analog) 11

HD Radio mode - Artist Experience display NS-CLHD01 1 Multicast channel number 2 Signal strength 3 Radio band 4 Stereo/Mono indicator 5 Preset indicator 6 SIS short name/universal short name 7 Current time 8 Display mode: AE Artist Experience with full-scale image display. PG Program Guide with scaled image display of the current program. 9 HD Radio station indicator 10 Backup battery status indicator 11 Frequency selected 12 SIS Long Name/Station slogan 13 SIS message information 14 Artist experience image of the current song 15 Current program PSD (Artist + Title) 12

Insignia Narrator RBDS mode 1 Signal strength 2 Radio band 3 Stereo/Mono indicator 4 Preset indicator 5 SIS short name/universal short name 6 Current time 7 RBDS indicator. Indicates that RBDS is available on the current station 8 Backup battery status indicator 9 Seek type 10 Frequency selected (digital) 11 Frequency bar (analog) 12 RBDS text 13

NS-CLHD01 Setting up your radio Installing the batteries Note The batteries will keep your clock running in case of a power outage. To install the batteries: 1 Open the battery compartment on the bottom of your radio. 2 Place four AA size alkaline batteries (not included) in the battery compartment. Make sure to match the + and - polarity on the batterise to the + and - signs in the battery compartment. 3 Close the battery compartment until it clicks into place 14

Insignia Narrator Using the clock and alarm Setting the time To set the time: 1 Press MENU to enter menu mode. The Main menu opens. 2 Press SEEK or SEEK to select Time Set, then press SEL. The Time menu opens. 15

NS-CLHD01 3 Press SEEK or SEEK to select Time Set, then press SEL. 4 Press CH or CH to set the hours. 5 Press PS or PS to set the minutes. 6 Press SEL to save the current time and return to the Time menu. 7 Press MENU repeatedly to return to radio mode. Setting the Hour Format To set the hour format: 1 Press MENU to enter menu mode. The Main menu opens. 16

Insignia Narrator 2 Press SEEK or SEEK to select Time Set, then press SEL. 3 Press SEEK or SEEK to select Hour Format, then press SEL. The Hour Format menu opens. 4 Press SEEK or SEEK to select the hour format you want, then press SEL to save the hour format and return to the time menu.. 5 Press MENU repeatedly to return to radio mode. 17

Setting the alarm NS-CLHD01 Your clock radio supports dual alarms. The alarms can be set up separately and the alarms can be set up in clock mode. To set the alarm time: 1 Press and hold AL1 or AL2 to open the alarm set menu for the alarm of your choice. 2 Press SEEK or SEEK to select Time Set, then press SEL. The Time Set screen opens. 3 Press CH or CH to set the hours. 4 Press PS or PS to set the minutes, then press SEL to save the alarm time and return to alarm set menu. 5 Press AL1 or AL2 to return to clock mode. 18

Insignia Narrator To set the Volume Snooze: 1 Press and hold AL1 or AL2 to open the alarm set menu for the alarm of your choice. 2 Press SEEK or SEEK to select Volume Snooze, then press SEL. The Volume/Snooze Set screen opens. 3 Press SEEK or SEEK to select the Volume. 4 Press CH or CH to set the volume, then press SEL to save the volume level and return to the alarm set menu. 5 Press SEEK or SEEK to select Snooze. 6 Press CH or CH to set the snooze duration (0, 5 min, 15 min, 30 min), then press SEL to save the snooze duration and return to the alarm set menu. 7 Press AL1 or AL2 to return to clock mode. 19

NS-CLHD01 Setting the alarm source To set the alarm source: 1 Press and hold AL1 or AL2 to open the alarm set menu for the alarm of your choice. 2 Press SEEK or SEEK to select Source Select, then press SEL. The Source Select screen opens. 3 Press SEEK or SEEK to select AM, FM, or Tone, then press SEL to save the alarm source and return to the alarm set menu screen. 4 Press AL1 or AL2 to return to clock mode. 20

Insignia Narrator Using your radio Understanding radio modes Your radio has a Clock mode and three audio modes (FM, AM, and AUX in). AM has Analog and HD Radio modes. FM has Analog, RBDS (Radio Broadcast Data System) and HD radio modes. When you press the (power) button, the radio switches from clock mode to the last used audio mode. Analog (AM) mode The Analog (AM) mode is the standard mode that has been in use for many years. The AM radio signal is an analog signal. When receiving an AM signal, the AM icon appears on the display. 21

Analog (FM) mode NS-CLHD01 The Analog (FM) mode is the standard mode that has been in use for many years. The FM radio signal is an analog signal. When receiving an FM signal, the FM icon appears on the display. AUX IN mode The AUX IN mode is transfer to the external sound source through your radio speaker. 22

Insignia Narrator HD Radio mode HD Radio mode is the new digital mode for AM and FM. Many HD Radio stations have several sub-channels called multicast channels. When receiving an HD Radio signal, the HD icon and the channel number appear on the display. RBDS mode RBDS (Radio Broadcast Data System) mode provides additional functionality to FM radio reception by transmitting encoded analog information with the FM radio signal. This signal is decoded by an RBDS receiver and can provide a range of informational features including the station s name. The RBDS text is usually centered. When the text fills the display, it begins scrolling. When receiving an RBDS signal, the RBDS icon appears on the display. 23

Turning your radio on or off NS-CLHD01 Connect the AC adapter to the DC jack on the back of your radio. Your radio turns on and the following screen appears on the display: Then the clock mode screen appears. 24

Insignia Narrator To turn your radio on or off: Press the (power) button. Your radio turns on and the following message appears on the display: 25

Then one of the following screens appears: NS-CLHD01 Analog (AM) mode Analog (FM) mode HD Radio mode RBDS mode AUX IN mode 26

Insignia Narrator To turn off your radio, press the (power) button. The display returns to clock mode. Adjusting the volume Caution Listening to your radio with the volume set too loud or using earphones for extended periods of time can damage your hearing. You should set the volume level to medium (the medium level is usually less than 2/3 of the maximum). To adjust the volume: Press VOL to increase the volume or VOL to decrease the volume. The volume indicator on the display shows the new volume level then disappears. 27

NS-CLHD01 Selecting the sound source To select the sound source: Press SRC repeatedly to cycle through the available sound sources (AM > FM > Aux In). This only works in Radio mode. Automatically tuning to a station To automatically tune to a station in analog (AM or FM) mode: Press SEEK to automatically tune to the next higher radio station. If the search reaches the top of the radio band, your radio goes to the bottom of the band and continues searching. Press SEEK to automatically tune to the next lower radio station. If the search reaches the bottom of the radio band, your radio goes to the top of the band and continues searching. To automatically tune to a station in HD Radio mode: Press SEEK to automatically tune to the next higher HD Radio station. In ALL SEEK or HD SEEK mode, each time you press SEEK, your radio goes to the next higher multicast channel of the current station. When your radio reaches the highest multicast channel, it goes to the next higher station (analog or HD Radio). 28

Insignia Narrator Press SEEK to automatically tune to the next lower HD Radio station. In HD SEEK mode, each time you press SEEK, your radio goes to the next lower multicast channel of the current station. When your radio reaches the lowest multicast channel, it goes to the next lower station (analog or HD Radio). The + after HD3 indicates at least one higher multicast channel. The absence of a + after HD3 indicates that 3 is the highest multicast channel. The next higher or lower station may be a standard analog (FM) station. To automatically tune to a radio station in RBDS mode: In ALL SEEK or HD SEEK mode, press SEEK to automatically tune to the next higher station. Press SEEK to automatically tune to the next lower radio station. If the search reaches the bottom of the radio band, your radio goes to the top of the band and continues searching. 29

Manually tuning to a frequency NS-CLHD01 When you manually tune, your radio goes to the next or previous frequency regardless of whether a station is broadcasting on the frequency. To manually tune to a frequency in analog (AM/ FM) mode or RBDS mode: Press CH for less than one second to tune your radio to the next higher frequency. Each press of the button changes the frequency by 10 khz for AM stations or 0.2 MHz for FM stations. Press or CH for less than one second. Your radio goes to the next lower frequency. Each press of the button changes the frequency by 10 khz for AM stations or 0.2 MHz for FM stations. Press and hold CH or CH to fast-forward or fast-reverse through multicast channels and frequencies. To manually tune to a frequency in HD Radio mode: Press CH for less than one second. Your radio goes to the next higher multicast channel for the current station. When your radio reaches the highest multicast channel, it goes to the next higher frequency. Press CH for less than one second. Your radio goes to the lower multicast channel for the current station. When your radio reaches the lowest multicast channel, it goes to the next lower frequency. Press and hold CH or CH to fast-forward or fast-reverse through multicast channels and frequencies. 30

Insignia Narrator Setting a preset station To set and use preset stations: 1 Tune to the station you want to make a preset. 2 Press and hold PS to set the preset. 3 To tune to a preset station, press PS or PS. Note: You can store an unlimited number of presets. To delete a preset station: 1 Tune to the station preset you want to delete. 2 Press and hold PS. The preset is deleted. 31

NS-CLHD01 Viewing the program guide (PG) in HD Radio mode To view the guide in HD Radio mode: 1 Press DISP. A scaled album is displayed and the program list is displayed under the album. 2 Press CH or CH or SEEK or SEEK to move to the selected program. If the Artist Experience is not supported, the HD Radio logo is displayed. 3 Press DISP to change the Artist Experience image. The Artist Experience (AE) image If the station you are listening to supports the Artist Experience display, the album cover of the song currently being played is shown on the screen. This function is available in HD Radio mode only. If Artist Experience is not available, the HD Radio logo is displayed. 32

Insignia Narrator Using the menu Your radio has a menu that lets you set radio options. To use the menu: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to highlight an option, then press SEL to select that option. 3 Press SEEK or SEEK or CH or CH to change the setting, then press SEL to confirm. 4 Press MENU to close the menu and return to the current radio mode. Setting a bookmark Audio data from the current channel can be bookmarked in HD Radio Mode. The total number of artist and song titles you can store in HD Radio mode is 10. To set a bookmark: Press B) to bookmark the audio data from the current channel. If the data is received normally, it displays on the screen and completes the bookmark. Notes: - If no bookmark data is available, your radio notifies you and does not bookmark. - If only partial bookmark data is available, your radio notifies you and does not bookmark. - Your bookmark list can be viewed from the Main menu under Bookmark My Bookmarks. 33

Using the bookmark option Displaying your bookmarks NS-CLHD01 To display your bookmarks: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to select My Bookmarks, then press SEL to select it. The My Bookmarks list opens. 3 Press MENU to return to the main menu. 34

Insignia Narrator To delete a bookmark: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to select My Bookmarks, then press SEL to select it. The My Bookmarks list opens. 3 Press SEEK or SEEK to select the bookmark you want to delete, then press B). You are prompted to confirm the deletion. 35

NS-CLHD01 4 Press SEEK or SEEK to select OK, then press SEL to confirm. A confirmation note is displayed. 5 Press MENU to return to the main menu. To display the Bookmark - QR code: To display selected bookmark in QR Code format on the LCD, the graphical QR Code can be scanned by a smart phone application (hundreds are available for free) and used for buying or searching the item on the web. 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to select My Bookmarks, then press SEL to select it. The My Bookmarks list opens. 3 Press SEEK or SEEK to highlight the bookmark you want, then press SEL repeatedly to display the following, if available: QR Code UPC Code 36

Insignia Narrator ISBN Bar Code Description 4 Press MENU to return to the main menu. Viewing the Bookmark History list To display your Bookmark History: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to select Bookmark History, then press SEL to select it. The Bookmark History list opens with your last 10 auto-saved bookmarks displayed 3 Press MENU to return to the main menu. Setting the Time For instructions on setting the time, see Setting the time on page 15. 37

NS-CLHD01 Setting the seek type To set the seek type: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to highlight Seek Type, then press SEL to select it. The Seek Type submenu opens. Press SEEK or SEEK to select the seek type you want, then press SEL to save Seek type and return to the Main menu. If you select ALL, your radio searches through all stations. If you select HD, your radio only searches through HD Radio stations. 3 Press MENU to return to radio mode. 38

Insignia Narrator Changing the settings Setting the tuning region Your radio is capable of tuning in different frequency spacing in both FM and AM (FM:200KHz, 100KHz, 50KHz/ AM:10KHz, 9KHz) for different regions. The default region is U.S. To set the tuning region: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to highlight Setting, then press SEL to select it. The Setting submenu opens. 39

NS-CLHD01 3 Press SEEK or SEEK to highlight Tuning Region, then press SEL to select it. The Tuning Mode submenu opens. 4 Press SEEK or SEEK to highlight the tuning mode you want, then press SEL. A confirmation box opens. 5 Press SEEK or SEEK to select OK, then press SEL. A confirmation note opens, and you are returned to the Setting submenu. 6 Press MENU to return to the Main menu. 40

Insignia Narrator Setting the LCD control To adjust the LCD control: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to highlight Setting, then press SEL to select it. The Setting submenu opens. 41

NS-CLHD01 3 Press SEEK or SEEK to highlight LCD control, then press SEL. The LCD Control submenu opens. 4 Press SEEK or SEEK to highlight the option you want to change (Backlight or Contrast). 5 Press CH or CH to change the Backlight or Contrast level, then press SEL to confirm the change and return to the Setting submenu. 6 Press MENU to return to the Main menu. Viewing HW/SW Version To view the HW/SW version: 1 Press MENU. The Main menu opens. 42

Insignia Narrator 2 Press SEEK or SEEK to highlight Setting, then press SEL to select it. The Setting submenu opens. 3 Press SEEK or SEEK to highlight HW/SW Version, then press SEL. The HW/SW Version submenu opens showing the hardware and software version information. 4 Press MENU to return to the Setting submenu. 43

NS-CLHD01 Resetting options to factory defaults To reset options to factory defaults: 1 Press MENU. The Main menu opens. 2 Press SEEK or SEEK to highlight Factory default, then press SEL to select it. The Factory Default submenu opens. 3 Press SEEK or SEEK to highlight OK, then press SEL. A Factory Default Complete message opens, then all settings are reset. 4 Your radio turns the power off and back on (to the clock mode), automatically. 44

Insignia Narrator Troubleshooting Symptoms Do not try to repair your radio yourself. Refer all servicing to qualified repair personnel. The radio does not turn on Poor radio reception No sound Your radio stops working The HD Radio sound keeps switching between Digital and Analog audio. HD Radio indicator keeps turning on and off. Possible causes and solutions There is moisture or condensation in your radio. Let your radio warm up to room temperature for 60 minutes, then try again. Make sure that the antennas (AM and FM) are connected correctly. Adjust the antenna for better reception. The volume control may be turned down. Increase the volume. Turn the power off and back on again, then start over. If powering off and back on again fails, press the reset button (you may need to insert the end of a bent paper clip into the reset hole on the side of your radio to do this). You may be out of range of the HD Radio stations in your area. Extend your antenna or move your radio closer to a window to improve reception. 45

NS-CLHD01 Specifications Frequency range Mode A : FM 87.5MHz - 108MHz (100 KHz step) AM 522KHz - 1620KHz (9 KHz step) Mode B : FM 87.5MHz - 107.9MHz (200 KHz step) AM 530KHz - 1710KHz (10 KHz step) Mode C : FM 87.5MHz - 108MHz (50 KHz step) AM 522KHz - 1620KHz (9 KHz step) Station presets Unlimited External connection Volume Display Dimensions W H W Legal notices Front : 3.5mm stereo headset Back : DC Plug/ 3.5mm AUX IN/ FM Antenna/ 3.5mm AM Antenna 30 levels 2.4"TFT LCD (320 x 240 QVGA) 12.8 in x 5.27 in x 5.26 in (325 mm x 134 mm x 133.5 mm) FCC information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. 46

Insignia Narrator Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. FCC warning Any change or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Canada ICES-003 statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. Trademark statement HD Radio Technology manufactured under license from ibiquity Digital Corporation. U.S. and Foreign Patents. HD Radio and the HD, HD Radio, and Arc logos are proprietary trademarks of ibiquity Digital Corp. 47

NS-CLHD01 48

Insignia Narrator 90-day limited warranty Insignia Products ( Insignia ) warrants to you, the original purchaser of this new NS-CLHD01 ( Product ), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of 90 days from the date of your purchase of the Product ( Warranty Period ). This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement. This warranty does not cover refurbished Product. If you notify Insignia during the Warranty Period of a defect covered by this warranty that requires service, terms of this warranty apply. How long does the coverage last? The Warranty Period lasts for 90 days from the date you purchased the Product. The purchase date is printed on the receipt you received with the Product. What does this warranty cover? During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product. How to obtain warranty service? If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. To obtain in-home warranty service for a television with a screen 25 inches or larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have an Insignia-approved repair person dispatched to your home. 49

NS-CLHD01 Where is the warranty valid? This warranty is valid only to the original purchaser of the product in the United States, Canada, and Mexico. What does the warranty not cover? This warranty does not cover: Customer instruction Installation Set up adjustments Cosmetic damage Damage due to acts of God, such as lightning strikes Accident Misuse Abuse Negligence Commercial use Modification of any part of the Product, including the antenna Plasma display panel damaged by static (non-moving) images applied for lengthy periods (burn-in). This warranty also does not cover: Damage due to incorrect operation or maintenance Connection to an incorrect voltage supply Attempted repair by anyone other than a facility authorized by Insignia to service the Product Products sold as is or with all faults Consumables, such as fuses or batteries Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. Contact Insignia: 50

Insignia Narrator For customer service please call 1-877-467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645 2012 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. 51

(877) 467-4289 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 2012 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 12-0611