PD-91787J IRHNA57Z6 RADIATION HARDENED POWER MOSFET SURFACE MOUNT (SMD-2) Product Summary Part Number Radiation Level RDS(on) I D QPL Part Number IRHNA57Z6 1 krads(si) 3.5m 75A* IRHNA53Z6 3 krads(si) 3.5m 75A* JANSF2N7467U2 IRHNA54Z6 5 krads(si) 3.5m 75A* JANSG2N7467U2 IRHNA58Z6 1 krads(si) 4.m 75A* JANSH2N7467U2 3V, N-CHANNEL REF: MIL-PRF-195/683 R 5 TECHNOLOGY SMD-2 Description IR HiRel R5 technology provides high performance power MOSFETs for space applications. These devices have been characterized for both Total Dose and Single Event Effect (SEE) with useful performance up to LET of 8 (MeV/(mg/cm 2 ). The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC-DC converters and motor controllers. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters. Features Single Event Effect (SEE) Hardened Low RDS(on) Low Total Gate Charge Simple Drive Requirements Ease of Paralleling Hermetically Sealed Electrically Isolated Ceramic Package Light Weight Surface Mount ESD Rating: Class 3A per MIL-STD-75, Method 12 Absolute Maximum Ratings Parameter Units I D @ V GS = 12V, T C = 25 C Continuous Drain Current 75* I D @ V GS = 12V, T C = 1 C Continuous Drain Current 75* A I DM Pulsed Drain Current 3 P D @T C = 25 C Maximum Power Dissipation 25 W Linear Derating Factor 2. W/ C V GS Gate-to-Source Voltage ± 2 V E AS Single Pulse Avalanche Energy 5 mj I AR Avalanche Current 75 A E AR Repetitive Avalanche Energy 25 mj dv/dt Peak Diode Recovery dv/dt.83 V/ns T J Operating Junction and -55 to + 15 T STG Storage Temperature Range C Lead Temperature 3 (for 5s) Weight 3.3 (Typical) g * Current is limited by package For Footnotes, refer to the page 2. 1 217-3-13
Electrical Characteristics @ Tj = 25 C (Unless Otherwise Specified) Source-Drain Diode Ratings and Characteristics IRHNA57Z6 Parameter Min. Typ. Max. Units Test Conditions BV DSS Drain-to-Source Breakdown Voltage 3 V V GS = V, I D = 1.mA BV DSS / T J Breakdown Voltage Temp. Coefficient.26 V/ C Reference to 25 C, I D = 1.mA R DS(on) Static Drain-to-Source On-Resistance 3.5 m V GS = 12V, I D = 75A V GS(th) Gate Threshold Voltage 2. 4. V V DS = V GS, I D = 1.mA Gfs Forward Transconductance 45 S V DS = 15V, I D = 75A I DSS 1 V DS = 24V, V GS = V Zero Gate Voltage Drain Current µa 25 V DS = 24V,V GS = V,T J =125 C I GSS Gate-to-Source Leakage Forward 1 V GS = 2V na Gate-to-Source Leakage Reverse -1 V GS = -2V Q G Total Gate Charge 2 I D = 45A Q GS Gate-to-Source Charge 55 nc V DS = 15V Q GD Gate-to-Drain ( Miller ) Charge 4 V GS = 12V t d(on) Turn-On Delay Time 35 V DD = 15V tr Rise Time 125 I D = 45A ns t d(off) Turn-Off Delay Time 8 R G = 2.35 t f Fall Time 5 V GS = 12V Ls +L D Total Inductance 4. nh Measured from center of Drain pad to center of Source pad C iss Input Capacitance 911 V GS = V C oss Output Capacitance 462 pf V DS = 25V C rss Reverse Transfer Capacitance 15 ƒ = 1.MHz Parameter Min. Typ. Max. Units Test Conditions I S Continuous Source Current (Body Diode) 75* I SM Pulsed Source Current (Body Diode) 3 V SD Diode Forward Voltage 1.3 V T J =25 C, I S = 75A, V GS =V t rr Reverse Recovery Time 155 ns T J =25 C, I F = 45A,V DD 25V Q rr Reverse Recovery Charge 69 µc di/dt = 1A/µs t on Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by L S +L D ) * Current is limited by package Thermal Resistance Parameter Min. Typ. Max. Units R JC Junction-to-Case.5 C/W R J-PCB Junction-to-PC Board (Soldered to 2 sq copper clad board) 1.6 A Footnotes: Repetitive Rating; Pulse width limited by maximum junction temperature. V DD = 25V, starting T J = 25 C, L =.3mH, Peak I L = 75A, V GS = 12V I SD 75A, di/dt 94A/µs, V DD 3V, T J 15 C Pulse width 3 µs; Duty Cycle 2% Total Dose Irradiation with V GS Bias. 12 volt V GS applied and V DS = during irradiation per MIL-STD-75, Method 119, condition A. Total Dose Irradiation with V DS Bias. 24 volt V DS applied and V GS = during irradiation per MlL-STD-75, Method 119, condition A. 2 217-3-13
IRHNA57Z6 Radiation Characteristics IR HiRel radiation hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at IR Hirel is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison. Table1. Electrical Characteristics @ Tj = 25 C, Post Total Dose Irradiation Parameter Up to 5 krads (Si) 1 1 krads (Si) 2 Units Test Conditions Min. Max. Min. Max. BV DSS Drain-to-Source Breakdown Voltage 3 3 V V GS = V, I D = 1.mA V GS(th) Gate Threshold Voltage 2. 4. 1.5 4. V V DS = V GS, I D = 1.mA I GSS Gate-to-Source Leakage Forward 1 1 na V GS = 2V I GSS Gate-to-Source Leakage Reverse -1-1 na V GS = -2V I DSS Zero Gate Voltage Drain Current 1 25 µa V DS = 24V, V GS = V R DS(on) R DS(on) Static Drain-to-Source On-State Resistance (TO-3) Static Drain-to-Source On-State Resistance (SMD-2) 4. 4.5 m V GS = 12V, I D = 45A 3.5 4. m V GS = 12V, I D = 45A V SD Diode Forward Voltage 1.3 1.3 V V GS = V, I D = 75A 1. Part numbers IRHNA57Z6 (), IRHNA53Z6 (JANSF2N7467U2) and IRHNA54Z6 (JANSG2N7467U2) 2. Part numbers IRHNA58Z6 (JANSH2N7467U2) IR HiRel radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2. Table 2. Typical Single Event Effect Safe Operating Area LET (MeV/(mg/cm 2 )) Energy (MeV) Range (µm) VDS (V) @ VGS = V @ VGS=-5V @ VGS=-1V @ VGS =-15V @ VGS=-2V 38 ± 5% 3 ± 7.5% 38 ± 7.5% 3 3 3 22.5 15 61 ± 5% 33 ± 7.5% 31 ± 1% 25 25 2 15 7.5 84 ± 5% 35 ± 7.5% 28 ± 7.5% 25 25 2 Bias VDS (V) 35 3 25 2 15 1 5-5 -1-15 -2 LET=38 ± 5% LET=61 ± 5% LET=84 ± 5% Bias VGS (V) For Footnotes, refer to the page 2. Fig a. Typical Single Event Effect, Safe Operating Area 3 217-3-13
I D, Drain-to-Source Current (A) IRHNA57Z6 Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 1 2. I D 45A ID = 75A C, Capacitance (pf) 1 1 1 2 15 1 5 T J = 15 C 4 4.5 5 5.5 6 6.5 7 V GS, Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics C oss C iss T J = 25 C V DS = 25V 6 s PULSE WIDTH VGS = V, f = 1MHz Ciss = Cgs + Cgd, C ds SHORTED Crss = Cgd Coss = Cds + Cgd C rss 1 1 1 V DS, Drain-to-Source Voltage (V) Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage R DS(on), Drain-to-Source On Resistance (Normalized) Fig 4. Normalized On-Resistance Vs. Temperature V GS, Gate-to-Source Voltage (V) 1.5 1..5 V GS = 1V. -6-4 -2 2 4 6 8 1 12 14 16 T J, Junction Temperature ( C) 2 15 1 5 I = D 45 A V DS = 24V V DS = 15V FOR TEST CIRCUIT SEE FIGURE 13 25 5 75 1 125 15 175 2 225 Q G, Total Gate Charge (nc) Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage 4 217-3-13
I D, Drain-to-Source Current (A) IRHNA57Z6 I SD, Reverse Drain Current (A) Fig 7. Typical Source-Drain Diode Forward Voltage I D, Drain Current (A) 1 1 1 1 25 2 15 1 5 T J = 25 C LIMITED BY PACKAGE T J = 15 C V GS = V.1..5 1. 1.5 2. 2.5 3. 3.5 V SD,Source-to-Drain Voltage (V) 25 5 75 1 125 15 T C, Case Temperature ( C) Fig 9. Maximum Drain Current Vs. Case Temperature E AS, Single Pulse Avalanche Energy (mj) 1 1 1 12 1 Tc = 25 C Tj = 15 C Single Pulse DC 1.1 1 1 1 8 6 4 2 OPERATION IN THIS AREA LIMITED BY R DS (on) V DS, Drain-to-Source Voltage (V) Fig 8. Maximum Safe Operating Area TOP BOTTOM 1 s 1ms 1ms I D 34A 47A 75A 25 5 75 1 125 15 Starting T, Junction Temperature ( J C) Fig 1. Maximum Avalanche Energy Vs. Drain Current 1 Thermal Response (Z thjc ).1.1 D =.5.2.1.5.2.1 SINGLE PULSE (THERMAL RESPONSE) Notes: 1. Duty factor D = t 1 / t2 2. Peak T J= P DM x Z thjc + TC.1.1.1.1.1.1 1 t 1, Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case 5 217-3-13 PDM t1 t2
IRHNA57Z6 15V tp V (BR)DSS V DS L DRIVER R G 2V tp D.U.T I AS.1 + - V DD A I AS Fig 12a. Unclamped Inductive Test Circuit Fig 12b. Unclamped Inductive Waveforms Fig 13a. Gate Charge Waveform Fig 13b. Gate Charge Test Circuit Fig 14a. Switching Time Test Circuit Fig 14b. Switching Time Waveforms 6 217-3-13
IRHNA57Z6 Case Outline and Dimensions SMD-2 IR HiRel Headquarters: 11 N. Sepulveda Blvd., El Segundo, California 9245, USA Tel: (31) 252-715 IR HiRel Leominster: 25 Crawford St., Leominster, Massachusetts 1453, USA Tel: (978) 534-5776 IR HiRel San Jose: 252 Junction Avenue, San Jose, California 95134, USA Tel: (48) 434-5 Data and specifications subject to change without notice. 7 217-3-13
IRHNA57Z6 IMPORTANT NOTICE The information given in this document shall be in no event regarded as guarantee of conditions or characteristic. The data contained herein is a characterization of the component based on internal standards and is intended to demonstrate and provide guidance for typical part performance. It will require further evaluation, qualification and analysis to determine suitability in the application environment to confirm compliance to your system requirements. With respect to any example hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind including without limitation warranties on non- infringement of intellectual property rights and any third party. In addition, any information given in this document is subject to customer s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer s product and any use of the product of Infineon Technologies in customer s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of any customer s technical departments to evaluate the suitability of the product for the intended applications and the completeness of the product information given in this document with respect to applications. For further information on the product, technology, delivery terms and conditions and prices, please contact your local sales representative or go to (www.infineon.com/hirel). WARNING Due to technical requirements products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. 8 217-3-13