Sunshine Coast Open Space Landscape Infrastructure Manual

Similar documents
Sunshine Coast Open Space Landscape Infrastructure Manual

Pryda Timber Connectors

Playground equipment and surfacing. Part 1: General safety requirements and test methods (EN :2008, MOD) AS :2014

range of safety surfacing

National Grid s commitments when undertaking works in the UK. Our stakeholder, community and amenity policy

AS/NZS :2011. Gate valves for waterworks purposes AS/NZS :2011. Part 2: Resilient seated. Australian/New Zealand Standard

21. HOT-DIP GALVANIZED COATING GUARANTEES

Introduction. Page 1. Welcome to the signage guidelines for St John Ambulance premises, updated as of September 2012.

Status Date Prepared Reviewed Endorsed Approved

range of safety surfacing

2017 Graphic Communication. National 5. Finalised Marking Instructions

Operating Standards Attachment to Development Application

Subsea All-Electric Technology Now available for the future field developments

ROLE STATEMENT MERCER HUMAN RESOURCE CONSULTING

Graphic Communication Assignment General assessment information

INTENT An Administrative Site Plan is required for the following situations, excluding single-family detached development:

Road signs Specifications

Level 2 Award, Certificate and Diploma in Creative Techniques [7112] Level 2 Floral units

Z D Image Scan Engine

Phlox Optical Waveguide for Augmented Reality Displays

BYV34X Product profile. 2. Pinning information. Dual rectifier diode ultrafast. 1.1 General description. 1.2 Features. 1.

FORTRESS BOTTOM PLATE ANCHORS. Product. Scope. Building Regulations. Appraisal No. 687 [2017]

Dual ultrafast rugged rectifier diode. Table 1. Quick reference Symbol Parameter Conditions Min Typ Max Unit V RRM repetitive peak

Application for Site Plan Review

FXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER #

VHF variable capacitance diode

AS Australian Standard STEEL WIRE FOR TENDONS IN PRESTRESSED CONCRETE. This is a free 5 page sample. Access the full version online.

superior high stylelite-aca.com

Mordialloc Bypass Project. Report of Naomi Cavanagh

50 ma LED driver in SOT457

Two elements in series configuration in a small SMD plastic package Low diode capacitance Low diode forward resistance AEC-Q101 qualified

AS/NZS :2014

Planar PIN diode in a SOD523 ultra small plastic SMD package.

Australian Standard. Precast reinforced concrete box culverts. Part 1: Small culverts (not exceeding 1200 mm width and 900 mm depth) AS 1597.

Australian Standard. Timber flooring. Part 2: Sanding and finishing AS AS

20 ma LED driver in SOT457

Four planar PIN diode array in SOT363 small SMD plastic package.

BAP Product profile. 2. Pinning information. 3. Ordering information. Silicon PIN diode. 1.1 General description. 1.2 Features and benefits

75 MHz, 30 db gain reverse amplifier

For a professional approach to your sign needs, consult a professional team.

Interpret technical drawing

ISO INTERNATIONAL STANDARD. Small craft Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials

Introduction to Megaweld 2. Product range 3. Polyurethane V-belts 4. Polyurethane cogged V-belts 5. Polyurethane round belts 5

BCP56H series. 80 V, 1 A NPN medium power transistors

AS/NZS 1200:2000 AS/NZS

Identification and recording of 'hot' sites - joint procedure for Electricity Industry and Communications Network Providers

INSTALLATION INSTRUCTIONS

Symbol Parameter Conditions Min Typ Max Unit V F forward voltage I F =10mA

DIY Pergola Guide Planning your Project Easy Step by Step Guide Simple Illustrations Maintainence

Ophthalmic optics Spectacle frames Requirements and test methods

SWING TRUCK TIRE HAMMOCK

80 V, 1 A NPN medium power transistors. Type number Package PNP complement Nexperia JEITA JEDEC BCP56T SOT223 SC-73 - BCP53T

STANDARD DRAWINGS GENERAL DRAWINGS 1 GENERAL DRAWINGS

PDTB1xxxT series. 500 ma, 50 V PNP resistor-equipped transistors

INSTALLATION INSTRUCTIONS

DYNEX SOFFIT SYSTEM. Product. Scope. Building Regulations. Appraisal No. 908 [2016] Appraisal No. 908 (2016) BRANZ Appraisals

TYPE APPROVAL PROCEDURE

Bio-Sand Filtration Mould Construction Guidelines

Level 1 Certificate in Design and Craft

Esthec. Terrace. Manual for Assembly and Installation

BC817K series. 1 Product profile. 45 V, 500 ma NPN general-purpose transistors. 1.1 General description. 1.2 Features and benefits. 1.

PDTD1xxxU series. 500 ma, 50 V NPN resistor-equipped transistors

BC857XQA series. 45 V, 100 ma PNP general-purpose transistors

BC847 series. 1 Product profile. 45 V, 100 ma NPN general-purpose transistors. 1.1 General description. 1.2 Features and benefits. 1.

Status Date Prepared Reviewed Endorsed Approved

Bats and the Law An overview for planning, building and maintenance works

Symbol Parameter Conditions Min Typ Max Unit V F forward voltage I F =10mA

ISO INTERNATIONAL STANDARD. Nomenclature Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange

Disclosure Initiative Principles of Disclosure

PDTC143/114/124/144EQA series

STEP BY STEP INSTALLATION INSTRUCTIONS. Newport Shutters

International development

ELECTRONIC DRAFTING GUIDELINES

BRICKLAYER TRADE REGULATION

Level 1 Certificate in Design and Craft

Ultrafast, epitaxial rectifier diode in a SOD113 (TO-220F) plastic package.

SAMPLE COURSE OUTLINE MATERIALS DESIGN AND TECHNOLOGY PRELIMINARY UNIT 1 AND UNIT 2

ETSI EN V1.2.1 ( ) Harmonized European Standard

WOOLMARK SPECIFICATION

BC817-25QA; BC817-40QA

Australian Standard. Wood processing machinery Safety. Part 5: Finishing machinery Moulding machines and routers with rotating tool AS 1473.

PDTC143X/123J/143Z/114YQA series

PARKING IMPROVEMENT AIRPORT CAMPUS AMENDED SITE PLAN APPROVAL DRAWINGS 113 KING STREET TOWN OF NORTH CASTLE, NEW YORK AIRPORT CAMPUS I-V LLC

Single Zener diodes in a SOD123 package

Engineering Recommendation M30 Issue Standard Electricity Network Operator Electricity Smart Meter Configurations

The BioBrick Public Agreement. DRAFT Version 1a. January For public distribution and comment

AS Australian Standard METRIC SCREW THREADS FOR FASTENERS. This is a free 6 page sample. Access the full version online.

STP-NU ROADMAP TO DEVELOP ASME CODE RULES FOR THE CONSTRUCTION OF HIGH TEMPERATURE GAS COOLED REACTORS (HTGRS)

Broadband LDMOS driver transistor. A 5 W LDMOS power transistor for broadcast and industrial applications in the HF to 2500 MHz band.

Australian Technical Specification

Ultrafast power diode in a SOD113 (TO-220F) plastic package.

Wide working voltage range: nominal 2.4 V to 75 V (E24 range) Two tolerance series: ± 2 % and ± 5 % AEC-Q101 qualified

Single Zener diodes in a SOD123 package

Guidance Note 7/17. Choosing the right photometer/illuminance meter

PNP general-purpose double transistor. PNP general-purpose double transistor in a small SOT143B Surface-Mounted Device (SMD) plastic package.

Contents. Before you begin. Introduction: Using construction tools and equipment 1. Element 1: Planning and preparing 3

ISO INTERNATIONAL STANDARD

Compliance pack. Table of Contents Version Control General Information Operator s Manual... 4

STEVAL-ISQ010V1. High-side current-sense amplifier demonstration board based on the TSC102. Features. Description

Planar PIN diode in a SOD882D leadless ultra small plastic SMD package.

Transcription:

Sunshine Coast Open Space Landscape Infrastructure Manual Exercise Equipment Technical Drawings () 1.0 Overview... 2 2.0 Technical drawing index... 3 3.0 Technical drawings... 4 EE-01 (1of1) - Bolt down - rubber surfacing on a concrete / CTB base with a concrete edge... 4 Also see: Information Sheet Specifications (INFO) (SPECS) Embellishments November 2015 1

1.0 Overview This category of the LIM has been developed to provide guidance for the design and construction of exercise equipment. The technical drawings section includes: Technical drawing index (list of embellishment information) Technical detail drawings (also available as individual PDF files). Important notes: This resource does not try to replicate all of the provisions of Legislation, Australian Standards (AS) and corporate documentation in words and pictures, nor does it seek to define their requirements. It aims to draw attention to the fact that effectively applied technical requirements translate into desirable qualities for end users. Product design, manufacture and installation require an appropriately qualified professional to provide site specific solutions. For further guidance see: LIM Drinking Fountains LIM Landscape Drainage LIM Paths, Trails and Tracks LIM Planting (Landscape) LIM Play Spaces LIM Preliminaries LIM Seats LIM Shade Sails LIM Signage. Sunshine Coast Open Space Landscape Infrastructure Manual November 2015 Exercise Equipment 2

2.0 Technical drawing index Table 1: Exercise equipment Technical drawing index Embellishment Drawing () Product description further guidance Product see Preliminaries Supplier Supplier reference Product information Size Materials Fixings Finish System access - Cultural heritage / Erosion and Sediment Control / Flora / Fauna / Health and Safety / Tree Protection Zones / Tree Root Conflicts Luminance contrast: Please note product images depict samples of products only. Luminance contrast requirements refer to the product and the background against which it is installed. not applicable EE-01 (1of1) See LIM Play Spaces Bolt down - rubber surfacing on a concrete / CTB base with a concrete edge Edging and soft fall products (eg timber edge, concrete edge) WET POUR (EPDM) SURFACING PLAY MATTA SURFACING CONCRETE EDGE SCC Custom Safety Floor Australia / Play Matta (or equivalent) SCC Custom PVC tiles Overall size is project specific 500x 500mm tiles. Overall size is project specific 150mmW x 200mmH (length site specific) Rubber EPDM Wetpour. Must be installed on a concrete or CTB base Recycled PVC tiles reinforced concrete base or cement treated base (CTB) (Concrete edge to be fibre reinforced or with a S12 reinforcing rod which is centrally placed. Mowing strip installed on top of a 50mm crusher dust base) See LIM Play Spaces Refer manufacturers recommendations or buried As specified Colour choice: using lighter colours is strongly recommended, darker colours can create very hot surfaces Colour by designer Other Warranty Minimum 3 years Minimum 6 years Bright blue, orange, yellow and red are not warranted against fade Sunshine Coast Open Space Landscape Infrastructure Manual November 2015 Exercise Equipment 3

3.0 Technical drawings Click to view separate technical drawing EE-01 (1of1) - Bolt down - rubber surfacing on a concrete / CTB base with a concrete edge Sunshine Coast Open Space Landscape Infrastructure Manual November 2015 Exercise Equipment 4

Sunshine Coast Open Space Landscape Infrastructure Manual DISCLAIMER Acknowledgements Council wishes to thank all contributors and stakeholders involved in the development of this document. Copyright Sunshine Coast Regional Council supports and encourages the distribution of its material however, copyright protects this document. Council has no objection to this material being reproduced but only if council is recognised as the owner of the copyright and this material remains unaltered. Disclaimer Information contained in this document is based on available information at the time of writing. All figures and diagrams are intended as an aid to design and include council s preferred elements but they are not intended to be prescriptive and may need to vary as dictated by site specific factors. While the Sunshine Coast Regional Council has exercised reasonable care in preparing this document it does not warrant or represent that it is accurate or complete. Council or its officers accept no responsibility for any loss occasioned to any person acting or refraining from acting in reliance upon any material contained in this document. This document is produced to convey general information and is not intended to constitute advice whether professional or legal. Any reference to legislation in this document is not an interpretation of the law. It is to be used as a guide only. Consult relevant authority websites for current documents, revisions and amendments. While every care has been taken in preparing the information in this document, Sunshine Coast Regional Council and its representatives accept no responsibility for decisions or actions taken as a result of any data, information, statement or advice, express or implied, contained within. The contents of this document were correct to the best of our knowledge at the time of publishing. Where a particular product or supplier is profiled in this document, Sunshine Coast Regional Council is NOT nominating this product or supplier as the selected choice. Product or supplier detail is to provide information to enable the user to source a product which contains the correct elements required for Council embellishments. Drawings contained in this document are NOT FOR CONSTRUCTION. Details in this document are deemed to be the minimum standard and the user may wish to apply a higher standard subject to approval by council. www.sunshinecoast.qld.gov.au mail@sunshinecoast.qld.gov.au T 07 5475 7272 F 07 5475 7277 Locked Bag 72 Sunshine Coast Mail Centre Qld 4560