SMD B/BDR6GAS1-R40/10T

Similar documents
SMD BT/BDGAR6S1-L40/10T

SMD BT/ BDGAR6S1-S01/10T

SMD /RSGHBHC1-S03/2T

SMD REFLECTOR /RSGHB2W-S01/2D/MS

SMD REFLECTOR 67-03A/R6GHBHW-A01/2T/MS

19-226/R6G7C-B02/2T SMD B. Features. Description. Applications

23-22C/S2BHC-B30/2A SMD B

SMD B 22-23C/R6GHBHW-A01/2C

EAST1005RA0 SMD B.

SMD B 22-23/R6GHBHC-A01/2C

SMD B /BHC-AN1P2/3T

SMD B /R6GHBHC-A01/2T

SMD B A/BHR6GHC-A01/2T

EAST1608RGA0 SMD B.

19-218/T1D-CQ2R2TY/3T

SMD B /R6G6C-A01/3T

SMD B /T3D-AQ1R2TY/3T

1 Ver.:3 Release Date:01/03/2017 狀態 :Approved( 正式發行 )

EVERLIGHT ELECTRONICS CO.,LTD.

SMD B EAST3215BA5. Page 1 of 10 Rev. 0.01

SMD B EAST1615RBA0.

Technical Data Sheet 0603 Package Chip LED (0.6mm Height)

HNB2727W-OS01 Hong Series

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet Chip LED with Right Angle Lens

12-22/R7G6C-A10/2C SMD B

SMD TOP View LEDs EAPL3527RA2

Technical Data Sheet Chip LED with Right Angle Lens

Technical Data Sheet Mini Top LEDs (Reverse Gull Wing)

Mini Top View LEDs EAPL3527GA5

Technical Data Sheet 0603 Package Chip LED (0.6mm Height)

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color (Multi-Color)

Technical Data Sheet Side View LED

Technical Data Sheet 0603 Package Chip LED (0.4mm Height)

EVERLIGHT ELECTRONICS CO., LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

17-215/B6C-YP2R2N/3T SMD B. Features. Description. Revision : 2 LifecyclePhase:

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

SMD Middle Power LED 67-21S/NB3C-D4555B4L12835Z15/2T. Preliminary. Features. Description

Technical Data Sheet 0603 Package Chip LED (0.8mm Height)

Technical Data Sheet. Top View LEDs with Lens 67-21B/BHC-XS1T2M/BT

EVERLIGHT ELECTRONICS CO., LTD.

19-213/GHC-ZN2Q1B8X/3T

Technical Data Sheet Chip LED with Bi-Color(Multi-Color)

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet Top View LEDs

Technical Data Sheet 0402 Package Chip LED (0.45 mm Height)

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 0603 Package Chip LED(0.4mm Height)

Technical Data Sheet 0603 Package Chip LED(0.6mm Height)

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet Chip LED with Bi-Color(Multi-Color)

Technical Data Sheet Full Color Top View LEDs

Features. Descriptions. Applications. compliant version. This application. LCDD back light. Mobile phones. Illuminations. Switch lights.

19-213/T3D-CS1T1B2/3T

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 0603 Package Infrared Chip LED SIR19-315/TR8

Technical Data Sheet 1206 Package Chip LED (0.5mm Height)

EVERLIGHT ELECTRONICS CO., LTD.

EVERLIGHT ELECTRONICS CO., LTD.

1.8mm Round Subminiature Infrared LED IR42-21C/TR8

EVERLIGHT ELECTRONICS CO., LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 0603 Package Infrared Chip LED SIR19-315/TR8

1206 Package Chip Infrared LED With Inner Lens IR11-21C/TR8

EVERLIGHT ELECTRONICS CO.,LTD.

IRR60-48C/TR8. Description. Applications Sensor Oximeter. Device Selection Guide Device No. Chip Material Lens Color IRR60-48C/TR8

Technical Data Sheet 0603 Package Infrared LED IR19-315C/TR8

SMD Power Top View LED EAPL3527WA7

Technical Data Sheet Infrared MIDLED LED HIR89-01C/1R

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 1206 Package Chip LED

SMD Low Power LED EAPL2835RA0 Preliminary

Technical Data Sheet 0603 Package Infrared LED

SMD Low Power LED /XK2C-SXXXXXXXXXX/ET

0.8mm Height Flat Top Infrared LED HIR19-21C/L11/TR8

Technical Data Sheet 1.6mm round Subminiature Side Looking Infrared LED IR26-61C/L302/TR8

Technical Data Sheet 1.6mm round Subminiature Side Looking Infrared LED EAISV3026A0

SMD Mini Top LEDs Y2SC-A0R1S2B7E-2T8-AM

Technical Data Sheet 0603 Package Infrared LED

Technical Data Sheet Top View LEDs

Technical Data Sheet 1.6mm round Subminiature Side Looking Infrared LED

0805 Package Infrared Chip LED IR17-21C/TR8

EVERLIGHT ELECTRONICS CO., LTD

EAPL2214GA0-AM. SMD Mini Top View LEDs PRELIMINARY. Features. Applications.

EVERLIGHT ELECTRONICS CO., LTD

65-11-GBC-Y0V1AAN0E-2T8-AM

SMD Low Power LED 67-21/XK2C-SXXXXXXXXX/2T

Technical Data Sheet 0805 Package Chip LED Preliminary

0805 Package Infrared Chip LED IR17-21C/TR8

0805 Package Infrared LED EAIST2012A1

1.9mm Round Subminiature Z-Bend Lead Infrared LED IR91-21C/TR10

EAIST1005A0 Preliminary

Technical Data Sheet Infrared MIDLED LED

Technical Data Sheet 1.6mm round Subminiature Side Looking Infrared LED IR26-71C/L302/TR8

0603 Package Infrared LED

Transcription:

Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow Solder process Full-color type Pb-free Component solderable surface finish is Gold RoHS compliant Description The 18-039B LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Moreover, with its black PCB, the 18-039B possess an ideal solution for high-contract and high-resolution indoor signage display. Applications Indoor signage display applications Indoor decorating and entertainment design Flat backlight for LCD, switch and symbol Indicator and backlighting for all consumer electronics 1

Device Selection Guide Chip Materials Emitted Color Resin Color AlGaInP Brilliant Red InGaN Brilliant Green Black Surface Diffused InGaN Brilliant Blue Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Reverse Voltage V R 5 V Forward Current I F R6:10 GA:10 BD:10 ma R6:20 Peak Forward Current I FP GA:20 (Duty 1/10 @1KHz) BD:20 ma R6:24 Power Dissipation Pd GA:31 mw BD:31 Junction Temperature T j 100 Operating Temperature T opr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 ESD (Classification acc. AEC Q101) Soldering Temperature ESD HBM T sol R:2000 G:1000 V B:1000 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. 2

Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv R6 11.8 20.0 GA 61.0 104.0 BD 8.8 25.4 Viewing Angle 2θ 1/2 ----- 120 ----- deg Peak Wavelength Dominant Wavelength Λp Λd mcd R6 625 GA ----- 525 ----- nm BD 465 R6 619 629 GA 525 530 nm BD 465 470 Forward Voltage R6 20 I Spectrum Radiation F =3mA Δλ GA ----- ----- nm Bandwidth 25 BD 25 GA 2.5 2.9 3.2 V R6 1.7 2.0 2.4 V F BD 2.5 2.9 3.2 Reverse Current I R ----- ----- 10 μa V R =5V Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3

Floating Bin(R6) Bin Range of Luminous Intensity RB 11.8 15.4 RD 15.4 20.0 mcd Bin Range of Dominant Wavelength R2 619.0 624.0 R3 624.0 629.0 nm Bin Range of Dominant Voltage R1 1.7 2.4 v Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.01V 4

Floating Bin(GA) Bin Range of Luminous Intensity GC 61.0 80.0 GE 80.0 104.0 mcd Bin Range of Dominant Wavelength G3 525.0 528.0 G4 527.0 530.0 nm Bin Range of Dominant Voltage G1 2.5 3.2 v Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.01V 5

Floating Bin(BD) Bin Range of Luminous Intensity BA 8.8 11.5 BC 11.5 15.0 BE 15.0 19.5 BG 19.5 25.4 mcd Bin Range of Dominant Wavelength B3 465.0 468.0 B4 467.0 470.0 nm Bin Range of Dominant Voltage B1 2.5 3.2 v Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.01V 6

Typical Electro-Optical Characteristics Curves Relative luminous intensity (%) Spectrum Distribution 100 Ta=25 C BLUE GREEN RED 75 50 25 0 400 450 500 550 600 650 700 Wavelength λ (nm) 1.0 0.9 0.8 0.7 Radiation Diagram Ta=25 C 0 10 20 30 0.5 0.3 0.1 40 50 60 70 80 90 0.2 0.4 0.6 Forward Current I F (ma) 50 40 30 25 20 10 RED Forward Current vs. Forward Voltage Ta=25 C BLUE GREEN 0 1.6 2.0 2.4 2.8 3.0 3.4 3.8 4.2 Forward Voltage V F(V) Relative luminous intensity 5 4 3 2 1 0 Forward Current Derating Curve 0 BLUE RED GREEN 20 40 60 80 100 Forward Current I FP (ma) Ambient Temperature vs. Power Dissipation Ambient Temperature vs. Power Dissipation Total Power Dissipation (mw) (mw) RED Total Power Dissipation BLUE GREEN Ambient Temperature Ta ( C) Ambient Temperature Ta ( C) 7

Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8

Moisture Resistant Packing Materials Label Explanation CPN: Customer s Product Number P/N: Product Number QTQ: Packing Quantity CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank LOT No: Lot Number Reel Dimensions 9

Carrier Tape Dimensions: The minimum quantity of packing is 10000 pcs per reel. The rest quantity which could not reach 4000 pcs per reel will goes to 2000 pcs per reel. Note: Tolerances unless mentioned ±0.1mm. Unit = mm Moisture Resistant Packing Process Label Aluminum moistue-proof bag Desiccant Label Note: Tolerances unless mentioned ±0.1mm. Unit = mm 10

Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168Hrs under 30 or less and 60% RH or less.if unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5 for 24 hours. 2.5 Before using LEDs, baking treatment should be implemented based on the following conditions: pre-curing at 60±5 for 24 hours or 125±5 for 3 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile Above255 C 30sec.Max. 3 C/sec.Max. Pre-heating 150~200 C 60~120sec. Above 217 C 60~150sec. 260 C Max. 10sec. Max. 6 C/sec.Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 11

5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6.Directions for use The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, It may cause migration resulting in LED damage. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2685-6688 Office: No 6-8, Zhonghua Rd., Shulin Dist., Fax: 886-2-2685-6699 New Taipei City 23860, Taiwan, R.O.C http://www.everlight.com 12

DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT s prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 13