Pag 1 of 15 TEST REPORT IEC 82/685/NP (not ACCREDIA accredited) IEC 60068-2-78 IEC 61215 IEC 61730-2 System voltage durability test for crystalline silicon modules Design qualification and type approval Report Reference No.... : PVP03 25638-150011 Date of issue... : 02 Mar 2015 Total number of pages... : 15 CB Testing Laboratory... : Address... : Applicant s name...: Address...: Test specification Standard...: Non-standard test method...: Test Report Form No....: Eurotest Laboratori S.r.l. Via Marconi, 23 35020 Brugine (PD) Italy SOLVIS d.o.o. Cehovska 106, 42000 Varazdin, Croatia IEC 82/685/NP (standard not Accredia accredited) IEC 60068-2-78 IEC 61215 IEC 61730-2 N/A iec62804 rev.02 This test report shall not be reproduced, except in full, without the written approval of Eurotest Laboratori S.r.l. Test item description... : Photovoltaic (PV) Module(s) Trade Mark... : Manufacturer... : Model/Type reference... : Ratings... : SOLVIS d.o.o. SV60-260 260W, class A, 1000V maximum system voltage Trade Mark... : Manufacturer... : Model/Type reference... : Ratings... : SOLVIS d.o.o. SV60-275E 275W, class A, 1000V maximum system voltage
Page 2 of 15 Report Ref. No. PVP03 25638-150011 Testing procedure and testing location: CB Testing Laboratory: Eurotest Laboratori S.r.l. Via Marconi, 23 35020 Brugine (PD) Italy Associated CB Test Laboratory: Approved by (+ signature)... : Testing procedure: TMP Approved by (+ signature)...: Testing procedure: WMT Witnessed by (+ signature)...: Approved by (+ signature)... : Testing procedure: SMT Approved by (+ signature)... : Supervised by (+ signature)... : Testing location/ address... : Testing procedure: RMT Approved by (+ signature)... : Supervised by (+ signature)... :
Page 3 of 15 Report Ref. No. PVP03 25638-150011 Summary of testing: Tests performed (name of test and test clause): 10.1 and MST 01 Visual inspection 10.2 Maximum power determination 10.3 Insulation test MST 13 Ground continuity test PID, Voltage stress in damp heat 10.15 Wet leakage current test final test Testing location: Eurotest Laboratori S.r.l. Via Marconi, 23 35020 Brugine (PD) Italy Summary of compliance with National Differences: none SV60-260 Copy of marking plate SV60-275E
Page 4 of 15 Report Ref. No. PVP03 25638-150011 GENERAL INFORMATION Test item particulars: Accessories and detachable parts included in the evaluation... : Options included... : none none Abbreviations used in the report: HF Humidity Freeze DH Damp Heat Imp Maximum power current Isc - Short circuit current Pmp Maximum power NOCT Nominal Operating Cell Temperature STC Standard Test Conditions TC Temperature Cycling Vmp Maximum power voltage Voc Open circuit voltage FF Fill Factor α Current temperature coefficient β Voltage temperature coefficient δ power temperature coefficient Possible test case verdicts: - test case does not apply to the test object... : N/A - test object does meet the requirement... : Pass (P) - test object does not meet the requirement... : Fail (F) Testing: Date of receipt of test item... : 14 Jan 2015 Date (s) of performance of tests... : 05 Feb 2015 ; 13 Feb 2015 General remarks: The test results presented in this report relate only to the object tested. Tests were requested by the customer. Overall test result refers only to performed tests. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma (point) is used as the decimal separator. General product information: Product Electrical Ratings: Module type SV60-260 SV60-275E Voc [V] 38.0 39.4 Vmp [V] 30.5 31.9 Imp [Adc] 8.59 8.69 Isc [Adc] 8.96 9.33 Pmp [W] 260 275 Maximum system voltage [V] Series Fuse Rating [A] 1000 1000 14.6 14.6
Page 5 of 15 Report Ref. No. PVP03 25638-150011 Testing procedure Other: PID according to 82/685/NP (standard not ACCREDIA accredited) Module group assignment: Sample # Group assignement Module type Sample S/N 01 A (control module) SV60-260 115100315 02 A (control module) SV60-275E 115100317 03 B (negative polarity) SV60-260 115100316 04 B (negative polarity) SV60-275E 115100318 Supplementary info: None 2 Modules per condition Group B: cells negative polarity 5.0 20.0 KWh/m 2 Light Soaking 10.1 and MST01 Visual Inspection 10.2 Maximum Power determination (control module included) 10.3 Insulation test MST 13 Ground continuity (if exposed conductive parts) Voltage stress in damp heat chamber 10.15 Wet leakage current test 10.2 Maximum Power determination (control module included) 10.1 and MST01 Visual Inspection 10.3 Insulation test
Page 6 of 15 Report Ref. No. PVP03 25638-150011 4 MARKING Name, monogram or symbol of manufacturer... : Type or model number... : SV60-260 Serial number... : Laminated Polarity of terminals or leads... : On connectors Maximum system voltage... : 1000 The date and place of manufacture... : Traceable by serial number Name, monogram or symbol of manufacturer... : Type or model number... : SV60-275E Serial number... : Laminated Polarity of terminals or leads... : On connectors Maximum system voltage... : 1000 The date and place of manufacture... : Traceable by serial number Initial examination All modules P 10 Preconditioning... : 5.5 kwh/m² 10.1 Visual inspection... : See table 10.1 Int P 10.2 Maximum power determination... : See table 10.2 Int 10.3 Insulation test... : See table 10.3 Int P MST 13 Ground Continuity test See table MST 13 P Group A Control Module Sample Group ID A Group B 2 Modules Sample Group ID B, C P PID PID according to 82/685/NP (standard not ACCRDIA accredited)... : 96 h P Final measurements See table 10.13 E P Final measurement All modules P 10.15 Wet leakage current test See table 10.15 F