Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5 Voltage Drop: 73 millivolts maximum, 5A, 25 C, 22 AWG wire body: copper alloy Socket hood: stainless steel, passivated finish: 50 microinches minimum gold plating over nickel underplate Size 16 Power s 809-110 Size 23 contacts are designed to meet SAE AS39029 requirements. These snap-in, rear release contacts are compatible with Series 790 and 791 connectors. Type AWG Wire Size Part Number Pin 22-28 809-001 Pin 26-30 809-042 Socket 22-28 809-002 Socket 26-30 809-043 Pin Socket Type AWG Wire Size Size #23 Crimp s ø A Color In. mm. Band Crimper Positioner.0335/.0355.0229/.0245.0335/.0355.0229/.0245 Ø.0275 (0.699).0265 (0.673) Ø.053 (1.35) HOOD Part Number Pin 16-20 809-110 (M39029/58-364) Socket 16-20 809-111 (M39029/57-358) 0.851/ 0.902 0.582/ 0.632 0.851/ 0.902 0.582/ 0.632 None Blue None Blue.289 (7.34).283 (7.19).034 (0.86).029 (0.74).440 (11.18).275 (6.99).265 (6.73) Size #16 Power s Crimper 809-136 (M22520/1-01) 809-136 (M22520/1-01).165 (4.19).160 (4.06).028 (0.71).022 (0.56) Ø A Positioner 809-137 (M22520/1-04) 809-137 (M22520/1-04) 809-005 (K1461) Insertion/ Removal Tool 809-088 809-057 809-088 809-005 (K1461) 809-088 809-057 809-088 COLOR BAND Ø.048 (1.22).044 (1.12) Ø A Ø.056 (1.42) COLOR BAND Ø.048 (1.22).044 (1.12) Ø.056 (1.42) Standard size #16 contacts accept #16 to #20 AWG wire. Approved to SAE-AMS-39029..531 (13.49) REF.103 (2.62).518 (13.16) REF Insertion/ Removal Tool 809-131 (M81969/14-03) 809-131 (M81969/14-03).103 (2.62) 809-111 Socket Ø.0635 (1.613).0616 (1.562).068 (1.73).066 (1.68).130 (3.30) Ø.113 (2.87) Operating temperature: -65 to +200 C Current rating: 13 ampere Voltage Drop: 49 millivolts maximum@13a, 16 AWG wire.068 (1.73).066 (1.68).130 (3.30) body: copper alloy, 50 Socket hood: stainless steel, passivated 80 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791
Pin and Socket s for Series 79 Connectors Crimp s Size 12 Power s 809-112 Standard size #12 contacts accept #12 to #14 AWG wire. Approved to SAE-AMS-39029. Type AWG Wire Size Pin 12-14 Socket 12-14.531 (13.49) REF Part Number 809-112 (M39029/58-365) 809-113 (M39029/57-359) Size #12 Power s.151 (3.84) Crimper 809-136 (M22520/1-01) 809-136 (M22520/1-01) Positioner 809-137 (M22520/1-04) 809-137 (M22520/1-04).518 (13.16) REF Insertion/ Removal Tool.151 (3.84) 809-113 Socket Ø.095 (2.41).093 (2.36).102 (2.59).098 (2.49).182 (4.62) Ø.161 (4.09).102 (2.59).098 (2.49).182 (4.62) Operating temperature: -65 to +200 C Current rating: 23 ampere Voltage Drop: 42 millivolts maximum@20a body: copper alloy, 50 Socket hood: stainless steel, passivated Size 8 Power s Size 8 contacts are designed to meet SAE AS39029 requirements. Snap in, rear release. Supplied with 859-042-03 sealing boot. 850-014 Type AWG Wire Size Part Number Pin 8 850-014F Socket 8 850-138F Size #8 Power s Pneumatic Crimper 859-025 (M22520/23-01) 859-025 (M22520/23-01) Die Assembly 859-026 (M22520/23-02) 859-026 (M22520/23-02) Positioner 859-046 (WA23-395L) 859-046 (WA23-395L) Removal Tool 850-138 Socket Ø.316 (8.03).313 (7.95).708 (17.98) REF.410 (10.41) MIN Operating temperature: -65 to +200 C Current rating: 46 ampere Voltage Drop: 26 millivolts maximum@46a body: copper alloy, 50 Socket hood: stainless steel, passivated.684 (17.37).410 (10.41) MIN.219 (5.56).217 (5.51).265 (6.73).262 (6.65).285 (7.24).265 (6.73).262 (6.65).033 (0.84).029 (0.74) Ø.179 (4.55) MIN SST HOOD Ø.316 (8.03).313 (7.95).033 (0.84).029 (0.74) Ø.179 (4.55) MIN 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 81
Coaxial s for Series 79 Connectors Size #12 AS39029 Coaxial s These snap-in, rear-release contacts Series 79 connectors with size #12 cavities. Crimp termination. SAE AS39029 qualified. Operating temperature: -65 to +200 C Dielectric withstanding voltage: 1000 Vac rms at sea level, 250 Vac at 50,000 feet Current rating: 1 ampere Inner contact, body, outer sleeve: copper alloy, gold over nickel underplate per AS39029 Type D Socket contact hood: stainless steel Insulator: fluoroplastic Size #12 AS39029 Coaxial s RG Cable Size Freq. Insertion/ Inner Shield Crimp Sleeve Removal Socket Crimper Positioner Crimper Die Set Tool RG174 12 700 MHZ 852-002-12-211 (M39029/28-211) RG179 12 200 MHZ 852-002-12-211 (M39029/28-211) RG180 12 700 MHz 852-002-12-409 (M39029/28-409) RG316 12 700 MHz 852-002-12-211 (M39029/28-211) 852-001-12-210 (M39029/27-210) 852-001-12-210 (M39029/27-210) 852-001-12-402 (M39029/27-402) 852-001-12-210 (M39029/27-210) 809-135 (M22520/2-34) 809-135 (M22520/2-34) 809-135 (M22520/2-34) 809-135 (M22520/2-34) 809-133 (M22520/31-01) 809-133 (M22520/31-01) 809-133 (M22520/31-01) 809-133 (M22520/31-01) 809-134 (M22520/31-02) 809-134 (M22520/31-02) 809-134 (M22520/31-02) 809-134 (M22520/31-02).182/.179 852-002.031 (0.79).570 (14.5).300/.295 (7.62/7.49).095/.093 (2.41/2.36).182/.179 Socket 852-001.560 (14.2).031 (0.79) (7.34/7.09) Ø.020 (0.11).161 (4.09) AS39029 Color Stripes AS39029 Color Bands Part No. 1st 2nd 3rd M39029/27-210 RED BROWN BLACK M39029/27-402 YELLOW BLACK RED M39029/28-211 RED BROWN BROWN M39029/28-409 YELLOW BLACK WHITE M39029/102-558 GREEN GREEN GRAY Cable Entry Inner Crimp Barrel 852-001, -002 RG174, RG179, RG316.090 (2.29) MIN RG180.108 (2.74) MIN 852-004 RG316.066 (1.68) MIN.022 (0.56) MIN.084 (2.13) MIN 82 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791
Coaxial s for Series 79 Connectors Size #16 AS39029 Coaxial s These snap-in, rear-release contacts fit Series 79 connectors with size #16 cavities. Crimp termination. SAE AS39029 qualified. Operating temperature: -65 to +200 C Dielectric withstanding voltage: 800 Vac rms at sea level, 250 Vac at 50,000 feet Current rating: 1 ampere VSWR: 1.50 max. @ 500 MHz Inner contact, body, outer sleeve: copper alloy, gold over nickel underplate per AS39029 Type D Socket contact hood: stainless steel Insulator: fluoroplastic Size #16 AS39029 Coaxial s RG Cable Size Max. Freq. Socket Inner Shield Crimp Sleeve Crimper Positioner Crimper Die Set Insertion/ Removal Tool RG174 RG179 RG316 16 500 MHZ 852-008-16-424 (M39029/76-424) 852-010-16-432 (M39029/78-432) 809-125 (M22520/2-35) 809-127 (M22520/4-01) 809-126 (M22520/4-02) 809-131 (M81969/14-03) RG178 16 500 MHZ 852-008-16-425 (M39029/76-425) 852-010-16-433 (M39029/78-433) 852-008 Socket 852-010.570 (14.5).300/.295 (7.62/7.49).560 (14.2) (7.34/7.09).130/.127 (3.30/3.23).130/.127 (3.30/3.23).031 (0.79).0635/.0615 (1.61/1.56).031 (0.79).113 (2.87) AS39029 Color Stripes Cable Entry Inner Crimp Barrel AS39029 Part No. Color Bands 1st 2nd 3rd M39029/76-424 YEL RED YEL M39029/76-425 YEL RED GRN M39029/78-432 YEL ORN RED RG174, RG179, RG316.067 (1.70) MIN RG178.0575 (1.46) MIN.021 (0.53) MIN.0155/.0145 (0.39/0.37).087 (2.21) MIN M39029/78-433 YEL ORN ORN 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 83
Coaxial s for Series 79 Connectors Size #12 50 Ohm High Frequency Matched-Impedance Coaxial s High Frequency coax contacts fit Glenair Series 79 connectors with size 12 contact cavities. 50 ohm nominal impedance. DC 3 GHz frequency range. s are snap-in, rear-release. Size 12 50 Ohm High Frequency Matched-Impedance Coaxial s Socket RG Cable Max. Freq. Socket RG178 (M17/93-RG178) 3 GHz 852-016-03 852-015-03 RG316 (M17/113-RG316) 3 GHz 852-016-01 852-015-01 RG316DS (M17/152-00001) 3 GHz 852-016-02 852-015-02 RG405-FLEX 3 GHZ 852-018 852-017 (7.34/7.09).161/.158 (4.09/4.01) Ø.0205/.0195 (0.521/0.495) Socket 852-015.560 (14.22).151/.148 (0.83/0.74) Socket 852-017 Ø.182/.179 CRIMP FERRULE Ø.095/.093 (2.41/2.36).300/.295 (7.62/7.49) 852-016.570 (14.48) SKT TO MATE WITH.0205/.0195 (0.521/0.495) PIN.151/.148 (0.83/0.74) 852-018.182/.179 CRIMP FERRULE (7.34/7.09).560 (14.22).151/.148.300/.295 (7.62/7.49).570 (14.48).151/.148.161/.158 (4.09/4.01) Ø.182/.179 Ø.095/.093 (2.41/2.36).182/.179 Ø.0205/.0195 (0.521/0.495) (0.83/0.74) SOLDER HOLE SKT TO MATE WITH.0205/.0195 (0.521/0.495) PIN SOLDER HOLE (0.83/0.74) Operating temperature: -650C to +2000C VSWR: 1.32:1 max. @ 3 GHz Nominal impedance: 50 ohms Insertion loss: 0.20 db maximum at 3 GHz Dielectric withstanding voltage: 1000 Vac rms at sea level Current rating: 1 ampere Shock: EIA-364-27 condition D Vibration: EIA-364-28 condition VI, letter J Center contact, body, crimp sleeve: copper alloy, 50 microinches gold over nickel plating Insulator: fluoroplastic Part Number 852-015 852-016, Installation/Removal Tool Inner Shield Crimp Sleeve Crimper Positioner Crimper Hex Die 809-128 (MH992) 809-128 (MH992) 859-006 (K1721) 859-006 (K1721) 809-130 (M22520/5-03) 809-130 (M22520/5-03) 852-017 (Solder termination) (Solder termination) (Solder termination) (Solder termination) 852-018 (Solder termination) (Solder termination) (Solder termination) (Solder termination) 809-128 (MH992) 859-006 (K1721) 809-130 (M22520/5-03) Installation/ Removal Tool 84 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791
Coaxial s for Series 79 Connectors Size #12 75 Ohm High Frequency Matched-Impedance Coaxial s 75 ohm coax contacts provide DC 3 GHz frequency range. Crimp termination. Supplied as unassembled kit with contact body, center contact and outer ferrule. These snap-in, rear-release contacts fit Glenair Series 79 connectors. Gold-plated copper alloy, fluoroplastic insulator. Size 12 75 Ohm High Frequency Matched-Impedance Coaxial s RG Cable Socket Socket RG179 (M17/94-RG179) V75268, V76261, V73263 (PIC Wire and Cable) 852-103-02 852-104-02 852-103-01 852-104-01 Ø.095/.093 (2.41/2.36).300/.295 (7.62/7.49) 852-103-01, -02.570 (14.48) SKT TO MATE WITH.0205/.0195 (0.521/0.495) PIN.151/.148 (0.83/0.74).182/.179 CRIMP FERRULE.161/.158 (4.09/4.01) Socket 852-104-01, -02.560 (14.22) (7.34/7.09).151/.148 Ø.182/.179 Ø.0205/.0195 (0.521/0.495) CRIMP FERRULE (0.83/0.74) Operating temperature: -65 to +200 C Dielectric withstanding voltage: 500 Vac Current rating: 1 ampere VSWR: 1.25:1 max. @ 3 GHz Impedance: 75 ohm Shock: EIA-364-27 condition D Vibration: EIA-364-28 condition VI, letter J Center contact, body,crimp sleeve: copper alloy, 50 microinches gold over nickel plating Insulator: fluoroplastic Hood: stainless steel, passivated Part Number 852-103-01 809-128 (MH992) 852-103-02 809-128 (MH992) 852-104-01 809-128 (MH992) 852-104-02 809-128 (MH992), Installation/Removal Tool Inner Shield Crimp Sleeve Crimper Positioner Crimper Positioner Inner 859-006 (K1721) 859-006 (K1721) 859-006 (K1721) 859-006 (K1721) 809-133 (M22520/31-01) 809-133 (M22520/31-01) 859-128 (GP959) 809-130 (M22520/5-03) 859-128 (GP959) 809-130 (M22520/5-03) Shield Insertion/ Removal Tool 809-128 (MH992) 859-006 (K1721) Installation/Removal Tool 809-133 (M22520/31-01) 859-128 (GP959) 809-130 (M22520/5-03) 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 85
Coaxial s for Series 79 Connectors Size #12 SMPM-Type Spring-Loaded s for DC 40 GHz Female Male 50 ohm high frequency size #12 coaxial contacts fit Glenair Series 79 connectors. Maximum operating frequency 40 GHz. Spring-loaded male contact assures consistent mating dimensions and superior performance. Supplied fully assembled with cable termination instruction sheet. DC 40 GHz frequency range 50 ohm impedance Aerospace-grade construction SMPM-type Interface per MIL-DTL-348 Size 12 50 Ohm SMPM-Type Coaxial s for DC 40 GHz Cable RG-405 Flex (Times Microwave TFlex-405) Tensolite LLF-1087) Female (Use in Pin Connectors) Spring-loaded interface Low insertion loss Solderless center contact VSWR 1.3 at 40 GHz Male (Use in Socket Connectors) 852-025-01 852-032-01 Operating temperature: -55 C to +125 C Dielectric withstanding voltage: 500 Vac Ins. resistance: 5000 megohms min. Frequency range: DC 40 GHz VSWR: 1.10 + (.005 x Freq GHz) Impedance: 50 ohm Insertion loss:.04 x (Freq in GHz) RF leakage: -(90 Freq GHz) Center contact: copper alloy, 50 Dielectric: PTFE per ASTM D-1710 Female body: copper alloy, 50 Male body: stainless steel, passivated Male contact spring: high carbon steel (music wire), nickel plated Ø.152/.148 (3.86/3.76) Ø.092/.088 (2.34/2.24) Ø.182/.179 CABLE (REF) SOLDER Male 852-032-01.470/.464 (11.94/11.79) Ø.150 (3.81).751 (19.08).291/.287 (7.39/7.29).034/.030 (0.86/0.76) Female 852-025-01.255 (6.48) (0.84/0.74).300/.295 (7.62/7.49).088/.085 (2.24/2.16) Ø.095/.091 (2.41/2.31) Ø.162/.158 (4.11/4.01) Ø.093/.089 (2.36/2.26) Ø.182/.178 (4.62/4.52) Cable Prep Dimensions for 852-025 Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI85009 for complete termination instructions. Cable Prep Dimensions for 852-032 Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI85010 for complete termination instructions..140 ±.010 (3.56 ± 0.25).005 (0.13) MIN BREAK EDGE.135 ±.010 (3.43 ± 0.25).005 (0.13) MIN BREAK EDGE 90º 90º PRE-TINNED CABLE BRAID.090 ±.010 (2.29 ± 0.25) PRE-TINNED CABLE BRAID.090 ±.010 (2.29 ± 0.25) 86
Datalink s for Series 791 Connectors Size #8 Differential Twinax s Differential twinax contacts accept 100 ohm shielded twisted pair cable. These snap-in, rearrelease contacts fit Glenair Series 79 connectors. Crimp termination. 24 and 26 AWG versions. Gold-plated copper alloy. Supplied unassembled with sealing boot and instruction sheet. Socket Operating temperature: -65 to +175 C Operating frequency 100 ohm versions: DC 3GHz Operating frequency 77 ohm versions: DC 20MHz Dielectric withstanding voltage, inner contact to inner contact: 1000 Vrms Dielectric withstanding voltage, inner contact to outer body: 500 Vrms Insulation resistance: 5000 megohms min. resistance, inner contacts: 55 millivolt max. voltage drop @ 1 ampere resistance, outer body: 75 millivolt max. voltage drop @ 12A Inner contacts, outer body: copper alloy, 50 Crimp ferrule: copper alloy, 50 Insulators: PPS Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower Size #8 Differential Twinax s Shielded Twisted Pair Cable Wire Size (AWG) Impedance (ohms) Socket GSC-03-83971-00 (Gore) 24 100 853-014-02F 853-026-01F 0024A0024 (TE Raychem) 24 100 853-014-04F 853-026-02F DXN2603 (Gore) 26 100 853-014-09F 853-026-04F M17/176-00002 24 77 853-014-05F 853-026-05F Ø.276/.271 (7.01/6.88).218 (5.54) HEX CRIMP INNER CRIMP BUSHING Ø.276/.271 (7.01/6.88).218 (5.54) HEX CRIMP.900/.840 (22.9/21.3) (0.84/0.74).305/.295 (7.75/7.49) 853-014 Socket 853-026.900/.840 (22.9/21.3) (0.84/0.74) (7.34/7.09) POLARIZATION KEY Ø.219/.217 Ø.316/.313 (5.56/5.51) (8.03/7.95) 4 1 3 2 ø.0250 ±.0005 (0.64 ± 0.013) TWO PLACES Ø.316/.313 (8.03/7.95) POLARIZATION KEY Ø.288/.284 (7.32/7.21) SKT TO ACCEPT.025 (0.64) PIN 2 PLACES.111 (2.82).111 (2.82) Sealing Boot Sealing boots are supplied with contacts. To order contacts without sealing boots, delete the F suffix from the part number Part Number 853-014 853-026, Removal Tool Inner s Outer Body Removal Crimper Positioner Crimper Hex Die Tool 809-240 (M22520/2-37) 859-007 (M22520/5-45) Inner Outer Body Removal Tool.985 (25.02).350 (8.89).326 (8.28) 809-240 (M22520/2-37) 859-007 (M22520/5-45) 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 87
Datalink s for Series 791 Connectors Size #8 Quadrax s Socket Operating temperature: -65 to +175 C Operating frequency: DC 3 GHz Characteristic Impedance: 100 ±10 ohms Dielectric withstanding voltage, inner to inner contact: 1000 Vrms sea level, 250 Vrms 70,000 feet. Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 250 Vrms 70,000 feet. resistance, inner contacts: 55 millivolt max. voltage drop @ 1 ampere resistance, outer body: 75 millivolt max. voltage drop @ 12A Insulation resistance: 5000 megohms min. resistance, inner contacts: 55 millivolt max. voltage drop @ 1 ampere resistance, outer body: 75 millivolt max. voltage drop @ 12A Inner contacts, outer body: copper alloy, 50 Crimp ferrule: copper alloy, 50 Insulators: PPS Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower Quadrax contacts are size 8 multi-pin contacts with four signal pins and an outer contact body. Crimp termination. Compatible with Glenair Series 79 connectors. Supplied as unassembled kit. Wire Size (AWG) 24 24 26 Ø.276/.271 (7.01/6.88) Ø.276/.271 (7.01/6.88) Ref Cable Dia..160 (4.06).175 (4.45).137 (3.48) Size #8 100 Ohm Quadrax s Cable Accomodation Mfgr. Part Number PIC E51424 Gore GSC-03-84608-00 854-001-02F Tensolite NF24Q100-01 Draka F 4704-4 PIC Tensolite PIC.920 (23.37) (0.84/0.74).305/.295 (7.75/7.49).218 (5.54) HEX CRIMP.218 (5.54) HEX CRIMP E50424 NF26Q100-01 E51426 854-001 Socket 854-019.900/.840 (22.9/21.3).033 (0.84).029 (0.74) POLARIZATION KEY Ø.219/.217 (5.56/5.51) 854-001-04F 854-001-01F Ø.025 (0.64).111 (2.82) (PIN NO. DESIGNATION NOT MARKED ON PART) POLARIZATION KEY Ø.288/.284 (7.32/7.21) Ø.316/.313 (8.03/7.95) Ø.316/.313 (8.03/7.95) (7.34/7.09) SKT TO ACCEPT.025 (0.64) PIN 2 PLACES Socket 854-019-02F 854-019-04F 1 854-019-01F.111 (2.82) 4 3 2 (PIN NO. DESIGNATION NOT MARKED ON PART) 4 1.111 (2.82).111 (2.82) 3 2 Sealing Boot Sealing boots are supplied with contacts. To order contacts without sealing boots, delete the F suffix from the part number PN 854-001 854-019, Removal Tool Inner s Outer Body Removal Crimper Positioner Crimper Hex Die Tool 809-240 (M22520/2-37) 859-007 (M22520/5-45) Inner Outer Body Removal Tool.985 (25.02).350 (8.89).326 (8.28) 809-240 (M22520/2-37) 859-007 (M22520/5-45) 88 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791
Datalink s for Series 791 Connectors Size #8 El Ochito Octaxial s Socket The 10G Ethernet with Patented Data Pair Isolator Technology United States Patent Number 9,257,796 DC 4 GHz frequency range 100 ohms Data pair isolation technology 50% size and weight savings compared to quadrax contacts Operating temperature: -65 to +175 C Operating frequency: DC 4 GHz Nominal Impedance: 100 ohms Dielectric withstanding voltage, inner to inner contact: 1000 Vrms sea level, 250 Vrms 70,000 feet. Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 250 Vrms 70,000 feet. Insulation resistance: 5000 megohms min. Vibration: MIL-DTL-38999 Series III Shock: MIL-DTL-38999 Series III Inner contacts, outer body: copper alloy, 50 Crimp ferrule: copper alloy, 50 Insulators: thermoplastic Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower El Ochito contacts are intended for harsh environment military and aerospace data networks utilizing 1000BASE-T or 10GBASE-T protocols. El Ochito contacts provide up to 50% total weight savings compared to quadrax-based solutions. These contacts have eight signal pins housed in a machined, gold plated outer contact. Crimp termination. Metal spline isolates data pairs for improved signal integrity. For use with aerospace-grade 26 AWG Category 6a cables with unshielded or shielded data pairs. El Ochito contacts snap into Series 791 connectors. Supplied as unassembled kit with outer body, (8) inner contacts, shield crimp ferrule, insulators, and instruction sheet. Cable Type S/UTP S/FTP PN 858-003-01F 858-032-01F 858-016-01F 858-032-02F Size #8 El Ochito Ethernet s for Series 791 Connectors Cable Cable Description Pin Unshielded twisted pairs Foil shields on individual twisted pairs Mfgr. Part Number PIC E6A3826 Gore RCN9047-26 Glenair Part No. Socket 963-003-26 858-003-01F 858-032-01F 963-033-26 858-016-01F 858-032-02F, Removal Tool Inner s Outer Body Removal Crimper Positioner Crimper Hex Die Tool 859-101 (K1906) 859-101 (K1906) Sealing Boot 859-134 (GS206) 859-007 (M22520/5-45) (not required) Sealing boots are supplied with Ochito contacts. To order contacts without sealing boots, delete the F suffix from the part number..93 (23.6) Ø.370 (9.40) SEALING BOOT FOR OCHITO CONTACTS USING.220 (5.59) DIAMETER CABLE 687-754-8-8 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 89
Datalink s for Series 791 Connectors Size #8 100 Ohm El Ochito Octaxial s Ochito Exploded View Dielectric Sleeve Socket s (8) Crimp Ferrule Dielectric Sleeve s (8) Crimp Ferrule Organizer Insulator Organizer Insulator Front Insulator Front Insulator Data Pair Isolator Data Pair Isolator Alignment Key Alignment Key Outer Body Outer Body Socket 858-003 and 858-016 El Ochito CABLE (REF) Ø.276/.271 (7.01/6.88).920 (23.37) SHIELD CRIMP 858-003:.231 (5.87) HEX 858-016:.265 (6.73) ROUND (0.84/0.74) POLARIZATION KEY Ø.219/.217 (5.56/5.51).305/.295 (7.75/7.49) Ø.316/.313 (8.03/7.95) 8 7 1 2.060 (1.52) 6 5 PIN NO. DESIGNATION (NOT MARKED ON PART) 3 4 858-032 El Ochito Socket CABLE (REF) Ø.276/.271 (7.01/6.88).975 (24.77) (0.84/0.74) SHIELD CRIMP 858-032-01:.231 (5.87) HEX 858-032-02:.265 (6.73) ROUND POLARIZATION KEY Ø.288/.284 (7.32/7.21) (7.34/7.09) Ø.316/.313 (8.03/7.95) 2 3 4.060 (1.52) 5 6 PIN NO. DESIGNATION (NOT MARKED ON PART) 1 8 7 90 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791
Datalink s for Series 791 Connectors Size #12 Ultra-Fast Differential Twinax s for DC 10 GHz Frequency Range Glenair Ultra-Twinax differential twinax contacts are suited for multi-gigabit data rate applications such as CML, LVDS and other advanced digital communications protocols. Size #12 100 ohm contacts feature DC 10 GHz frequency range. Use with high-speed #30 AWG twisted pair cable 963-102-30. These contacts are compatible with Glenair Series 791 connectors with size keyed #12 cavities Order connector with -688 suffix code to specify keyed cavities. Snap-in, rear release. Solder termination. Supplied as kit with body, front insulator-solder contact subassembly, and rear insulator. Features DC 10 GHz frequency range 100 ohm impedance Aerospace-grade construction Low insertion loss Applications LVDS SATA 3.0 DisplayPort CML Socket Cable 963-102-30 (Glenair) Wire Size (AWG) Size #12 Ultra-Twinax s Impedance (ohms) Socket Assembly Instruction Sheet 30 100 853-016-01 853-015-01 AI85051 Connector Compatibility Operating temperature: -650C to +1050C Operating frequency: 0 10 GHz Impedance: 100 ohms VSWR: 1.1 + (.03 X Freq GHz) Insertion loss : (.33 X Freq GHz) Dielectric withstanding voltage: 500 Vrms Insulation resistance: 5000 megohms min. Inner contacts, outer body: copper alloy, 50 Insulator: glass-filled PTFE Rear insulator: PPS Socket hood: stainless steel, passivated Compatible only with connectors with specially keyed size #12 insert cavities. To order keyed connectors, add modification code -688 to the part number per the following example: 791-001PH-10P4MES-688 Design Features Socket Design Features FRONT INSULATOR BODY REAR INSULATOR 30 AWG TWISTED PAIR CABLE HOOD BODY REAR INSULATOR 30 AWG TWISTED PAIR CABLE SOCKET CONTACTS SOLDER TERMINATIONS PIN CONTACTS FRONT INSULATOR SOLDER TERMINATIONS 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 91
Datalink s for Series 791 Connectors Size #12 Ultra-Fast Differential Twinax s for DC 10 GHz Frequency Range 853-016-01 Socket 853-015-01 ALIGNMENT KEY Ø.096 (2.44).560 (14.22).300/.296 Ø.182 (7.62/7.52) (4.62).040 (1.02) ALIGNMENT KEY.550 (13.97) Ø.151.290/.280 (7.37/7.11) (3.84) A B A B Ø.161 (4.09).025/.017 (0.64/0.43).040 (1.02).033/.030 (0.84/0.76) CAVITY IDENTIFICATION SHOWN FOR REFERENCE ONLY AND IS NOT MARKED ON CONTACT Ø.126 (3.20) Ø.151 (3.84) CAVITY IDENTIFICATION SHOWN FOR REFERENCE ONLY AND IS NOT MARKED ON CONTACT.033/.030 (0.84/0.76) Ø.188 (4.78) Ø.126 (3.20) VSWR Performance Data VSWR Insertion Loss 1 2.000 s Only 0 1.900-1 1.800-2 1.700-3 Cable Only (47 in.) 1.600-4 1.500-5 1.400 Cable and s -6 1.300-7 1.200-8 1.100 0 2.0 4.0 6.0 8.0 10.0 12.0-9 Frequency (GHz) 0 2.0 4.0 6.0 8.0 10.0 Frequency (GHz) Insertion Loss (db) Conductors Insulation Inner shield Outer shield Jacket Temperature Rating 963-102-30 100 Ohm Twisted Pair Cable 30 AWG silver-coated high strength copper alloy, 19/42 strand PFA, white and yellow,.032 dia..0015" aluminum/polyester tape Silver-coated 40 AWG braid, 90% minimum coverage PFA, black -65 to +105 C #40 AWG SILVER-COATED HIGH STRENGTH COPPER ALLOY BRAID Part Number 963-102-30.107 ±.006 (2.72 ± 0.15) PFA INSULATION Impedance Capacitance DC resistance Attenuation (nominal) 100 ± 10 ohms 15.0 pf/ft (cond-cond) 98.55 ohms/1000 ft. maximum 40 db @ 500 MHz, 56dB @ 1 GHz PFA JACKET, BLACK.032 ±.002 (0.81 ± 0.05) #30 AWG 19/42 SILVER-COATED HIGH STRENGTH COPPER ALLOY Velocity of Propagation 80% 92 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791
Pneumatic s for Series 790 and 791 Connectors Size #12 Pneumatic s Stainless steel pneumatic contacts attach to 3/32 inch (2.38) diameter tubing. Compatible with all Series 79 and Series 80 Mighty Mouse connectors. Socket contact has o-ring and PTFE backup washers. s snap into size #12 connector cavities. Originally designed for pitot tube connections, these pneumatic contacts are rated for 100 PSI maximum air pressure. No installation tool is required. Remove contacts with plastic extraction tool. 100 psi Stainless steel Accepts 3/32 in. diameter tube Fits in standard #12 contact cavity Size #12 Pneumatic s Type Tube I.D. Socket Socket Pneumatic.094 (2.38) 830-003 830-004 830-003.340/.336 (8.64/8.53).975 (24.8) (0.83/0.74) Ø.050 Ø.094 (1.27) (2.39) Ø.079 (2.0) Ø.182/.179 (4.62/4.54) Ø.151/.148 Ø.135/.132 (3.43/3.35) Operating temperature: -65 to +200 C Maximum static air pressure 100 psi (6.8 bar)i Body: stainless steel, passivated O-ring: fluorosilicone Washers: PTFE Socket 830-004.288/.280 (7.32/7.11).975 (24.8) (0.83/0.74) Ø.086/.084 (2.18/2.13) Ø.160 (4.06) Ø.182/.179 (4.62/4.54) Ø.151/.148 Ø.135/.132 (3.43/3.35) 2018 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 93