T/R Modules. Version 1.0

Similar documents
Continuous Wave SSPAs. Version 1.6

Integrated Microwave Assembly & Subsystem Solutions

RF & Microwave Power Amplifiers

Amplifiers & Components

TMS Overview

AEROSPACE AND DEFENSE

Your Single Source for Advanced Microwave and RF Technologies. teledynemicrowave.com or

Hardware Repairs & Upgrades. RF/Microwave & Microelectronics Division of API Technologies

Advances in Microwave & Millimeterwave Integrated Circuits

MPT, Inc. The Right Solution With A Lower Risk At The Right Time.

TMS Technology Platform

COMMUNICATION SATCOM / DATA LINK CAPABILITIES. Microwave solutions for your demanding requirements

Specialized Integrated Hybrid Modules, Assemblies, Subsystems and Systems. RF and Microwave Components

CUSTOM INTEGRATED ASSEMBLIES

8.5 GHz to 13.5 GHz, GaAs, MMIC, I/Q Mixer HMC521ALC4

Project: IEEE P Working Group for Wireless Personal Area Networks N

Development of Low Cost Millimeter Wave MMIC

Microwave capability. Delivering precision effects. e2v.com

4 GHz to 8.5 GHz, GaAs, MMIC, I/Q Mixer HMC525ALC4

SATURNE Microsystems Based on Wide Band Gap Materials for Future Space Transmitting Ultra Wideband Receiving Systems

Foundries, MMICs, systems. Rüdiger Follmann

Networks International Corp. NIC Overview NETWORKS INTERNATIONAL CORPORATION. P: (913) F: (913)

AEROSPACE AND DEFENSE

Gallium Nitride (GaN) Technology & Product Development

Ka Band Radar Transceiver

FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.

= 25 C) Parameter 0.5 GHz 1.0 GHz 2.5 GHz 4.0 GHz 6.0 GHz Units. Gain db. 23 dbm W

A Miniaturized Multi-Channel TR Module Design Based on Silicon Substrate

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V

LOW COST PHASED ARRAY ANTENNA TRANSCEIVER FOR WPAN APPLICATIONS

20 GHz to 44 GHz, GaAs, phemt, MMIC, Low Noise Amplifier HMC1040CHIPS

9-10 GHz GaAs MMIC Core Chip

Silicon PIN Limiter Diodes V 5.0

RF & microwave signal conditioning and electromagnetic spectrum management solutions, from components to complete subsystems.

= 25 C) Parameter 0.5 GHz 1.0 GHz 2.5 GHz 4.0 GHz 6.0 GHz Units. Gain db. 23 dbm W

narda today narda today RF & Microwave Product Overview w w w. nardamicrowave. com

3D Integration Using Wafer-Level Packaging

Multi-function Phased Array Radars (MPAR)

6 GHz to 10 GHz, GaAs, MMIC, I/Q Mixer HMC520A

Freescale RF Solutions

14 GHz to 32 GHz, GaAs, MMIC, Double Balanced Mixer HMC292A

Effects to develop a high-performance millimeter-wave radar with RF CMOS technology

Solid State Broadband Amplifiers

Parameter Min. Typ. Max. Units

= 25 C) Parameter 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz 5.0 GHz 6.0 GHz Units. Gain db. 32 dbm W

White Paper. Gallium Nitride (GaN) Enabled C-Band T/R Modules

WE ARE THERE WORLD LEADER IN MICROWAVE AND MM-WAVE COMPONENTS

Packaged mm-wave GaN, GaAs and Si ICs for 5G and automotive radar

MONOLITHIC MICROWAVE INTEGRATED CIRCUIT (MMIC)

FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

= +25 C, IF= 100 MHz, LO = +15 dbm*

Electromagnetic Integrated Solutions

MA4L Series. Silicon PIN Limiters RoHS Compliant. M/A-COM Products Rev. V12. Features. Chip Outline. Description. Applications

Features. Output Third Order Intercept (IP3) [2] dbm Power Added Efficiency %

= 25 C) Parameter 2.7 GHz 2.9 GHz 3.1 GHz 3.3 GHz 3.5 GHz Units Small Signal Gain db

Rethinking The Role Of phemt Cascode Amplifiers In RF Design

HIGHLY INTEGRATED APPLICATION SPECIFIC MMICS FOR ACTIVE PHASED ARRAY RADAR APPLICATIONS

Features. = 25 C, IF = 3 GHz, LO = +16 dbm

MACP Temperature Compensated Directional RMS Power Detector 2-6 GHz Rev. V1 Features Integrated Directional Coupler Low Insertion Loss: 0.15 db

10 GHz to 20 GHz, GaAs, MMIC, Double Balanced Mixer HMC554ALC3B

5G Systems and Packaging Opportunities

Silicon Integrated Circuits for Space Applications

Best-in-industry performance. Radar. Communication. Electronic Counter Measures. Laboratory Instrumentation. Commercial and military products

Microwave Office Application Note

22. VLSI in Communications

Wireless Semiconductor Solutions for RF and Microwave Communications. Selection Guide

High Power RF/Microwave Transistors, Pallets and Amplifiers from Integra Technologies, Inc.

Features. Preliminary. = +25 C, IF = 1 GHz, LO = +13 dbm*

= +25 C, IF = 2350 MHz, LO = +4 dbm, VDLO1, 2 = +3V, IDLO = 150 ma, VDRF = +3V, IDRF = 200mA, USB [1][2] Parameter Min. Typ. Max.

GaN MMIC PAs for MMW Applicaitons

Features. = +25 C, Vdd = 5V

Smart Energy Solutions for the Wireless Home

33-47 GHz Wide Band Driver Amplifier TGA4522

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Integrated Microwave Assemblies

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

RF and Microwave Signal Conditioning and Management

Microwave / RF / System

21 GHz to 27 GHz, GaAs, MMIC, I/Q Upconverter HMC815B

Description Package Green Status. Refer to our website for a list of definitions for terminology presented in this table.

RF High Power GaN Portfolio GaN on Si and GaN on SiC

FEATURES DESCRIPTION ABSOLUTE MAXIMUM RATINGS. T AMB = +25 C ( Unless otherwise specified )

Absolute Maximum Ratings Parameter Rating Unit Drain Voltage (V D ) 150 V Gate Voltage (V G ) -8 to +2 V Gate Current (I G ) 8 ma Operational Voltage

Application Note M540

TGA2509. Wideband 1W HPA with AGC

CTT Technical Proposal

MACP Temperature Compensated Directional RMS Power Detector GHz Rev. V1 Features Functional Schematic Description Pin Configuration 3

IMS2013 / UMS. Update on latest MMIC product development. Viaud JP : June 5 th, 2013

23-29 GHz High Power Amplifier TGA9070-SCC

Cloud Radar LNA/Downconverter FINAL SUMMARY REPORT

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

2 18GHz Double Balanced Ring Mixer

Cascadable Silicon Bipolar MMIC Amplifier. Technical Data MSA-0686

Session 3. CMOS RF IC Design Principles

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

KA-BAND EQUIPMENT ASSEMBLY

= 25 C) Parameter 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz Units Small Signal Gain db P OUT

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A

HMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description

Transcription:

T/R Modules Version 1.0 Date: Jun 1, 2015

CONTENT Product Overview... 3 FACTS ON THE TECHNOLOGY... 4 ABOUT NANOWAVE... 6 RF Components and Subsystems NANOWAVE Technologies Inc. is a privately owned Canadian manufacturer of advanced high reliability RF and microwave components, modules and subsystems for the Aerospace, Avionics, Defense, Industrial and Medical markets. At NANOWAVE all critical processes are conducted in-house to provide a controlled supply chain to the end customer over product life spans up to and beyond 20 years. In house processes include: Packaging and Housing Technology Thin-Film Technology Semiconductor Device and MMIC Design RF Circuit Engineering RF Filter Design Circuit Card Design and Manufacturing Assembly and Integration Electrical and Environmental testing Quality Assurance The foundation of the NANOWAVE product is a proprietary, high reliability, hybrid monolithic integrated circuit (HMIC) process. The HMIC process integrates bare die with in-house thin film circuits which are then hermetically sealed within a modular assembly. The resultant circuits can be sustained over product lifetimes of up to and beyond 20 years without change in module function or physical form fit making NANOWAVE product ideally suited to the high reliability long duration product requirements of aerospace and defense applications. The RF subassemblies comprise Solid-State Power amplifiers, Up-/Down-Converters, Filters, Synthesizers, Low-Noise Receivers, and Limiters. All RF blocks can be complemented by sophisticated Digital Control Interfaces, which allow interrogation from supervision systems, enabling remote status reporting on all major subsystem parameters, such as voltages, currents, or RF power levels. NANOWAVE uses the following integrated circuit processes in its HMIC modules and is continuously reviewing and assessing the potential of new technologies to address customer requirements: Gallium Nitrid (GaN) Gallium Arsenid (GaAs) Silicon Germanium (SiGe) Bi-polar CMOS (BiCMOS) High Power Silicon (LDMOS) Indium Phosphide (InP) NANOWAVE Technologies Inc. PROPRIETARY INFORMATION! 2 / 6

Product Overview NANOWAVE's product portfolio covers a wide range of RF modules, components, subsystems, systems and sophisticated assemblies for the following Markets Commercial Aerospace Defense Communications Industrial Medical NANOWAVE RF products can be found in applications such as Airborne and Ground-based RADAR SatCom Terrestrial Communication NANOWAVE's Aerospace products can be found on the following platforms A380 B787 A320 B737 F-18 P-3 Fig. 1: Overview on NANOWAVE's Product Portfolio and Markets NANOWAVE Technologies Inc. PROPRIETARY INFORMATION! 3 / 6

FACTS ON THE TECHNOLOGY ACTIVE DEVICE TECHNOLOGY NANOWAVE uses GaN, GaAs, SiGe, BiCMOS, LDMOS, and InP bare die active devices in its RF subassemblies in order to obtain Best possible thermal management High efficiency Lowest parasitics Smallest size Multi-octave matching Multi-decade obsolescence mitigation All RF subassemblies are packaged into hermetically sealed housings to achieve high reliability and high MTBF performance. KEY TECHNOLOGIES NANOWAVE has all manufacturing technologies inhouse to produce high volumes of complex assemblies. This comprises Hybrid Module Assembly (Pick & Place, Eutectic Pick & Place, Automated Wire Bonding) Integration Test & Tune Quality Assurance (Electrical and Environmental testing) FREQUENCY BAND DEFINITION Band Range L 1.0-2.0 S 2.0-4.0 C 4.0-8.0 X 8.0-12.0 Ku 12.0-18.0 Ka 28.0-32.0 BB Broad band (multi octave) Engineering Chip Design Thin Film Technology Packaging Technologies (Machining, Reflow) Surface Mount Technology (PCB and Ceramic) QUALITY ASSURANCE NANOWAVE Technologies Inc. is certified to the following standards ISO 9001:2008 AS 9100 The products are qualified and tested according to the following standards: DO-160 MIL-STD-883 MIL-C-9858A MIL-PRF-38534C NANOWAVE Technologies Inc. PROPRIETARY INFORMATION! 4 / 6

MINIATURIZED T/R MODULES Based on NANOWAVE's Thin Film and Package Manufacturing capabilities, very compact and lightweight transceiver modules can be realized. These miniaturized Tx and Rx modules comprise the listed features. A full Transceiver subsystem is obtained by complementing these T/R modules by a SSPA module. Special Features Rx Module Input signal Limiter LNA Image Rejection Mixer Low-Pass Filter Gain stages Multiplier Band-Pass Filter Tx Module Driver SSPA Gain Stages Band Pass Filter Multiplier Fig. 2: Miniaturized X-Band Tx and Rx Modules (size: 2.51 sq.in., weight: < 1 oz) Rx Specifications Model Number Band Input GHz IF MHz Conversion Gain db Input 1dB Compression Point dbm Image Rejection db Spurious Operating Temperature C Size inch NWRX0812 00 X/L 8.0 12.0 L Band 29.0 25.0 > 25 60 55 +85 1.75 x 1.6 x 0.215 Tx Specifications Model Number Band Output GHz IF MHz Output Power dbm Carrier Supression Carrier Leakage Spurious Operating Temperature C Size inch NWTX0812 33 L/X 8.0 12.0 L Band +9.0 36.0 22.0 70 55 +85 1.75 x 1.6 x 0.215 All specifications are subject to change without notice. Full Data Sheets of NANOWAVE products are available on request at sales@nanowavetech.com. NANOWAVE Technologies Inc. PROPRIETARY INFORMATION! 5 / 6

ABOUT NANOWAVE NANOWAVE Technologies Inc. was founded in 1992 and is a leading Canadian Designer and Manufacturer of Advanced Microwave and Millimeter Wave Components and Sub-Systems for the Radar, Communications, Industrial and Medical markets. The company s products can be found on the most advanced commercial and defense aircrafts, as well as ground based Radar and Communication Systems. NANOWAVE s commitment to annual investments in R&D combined with in-house control of critical design, manufacturing and test processes results in rapid response to our customers demands for: Customization Obsolescence Mitigation Demanding Technical Specifications On-time Delivery High Reliability Traceability NANOWAVE Technologies Inc. 425 Horner Avenue Etobicoke, Ontario M8W 4W3 Canada Phone: +1-416-252-5602 Fax: +1-416-252-7077 Email: sales@nanowavetech.com WWW: www.nanowavetech.com NANOWAVE Technologies Inc. PROPRIETARY INFORMATION! 6 / 6