Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01
1.02
Ordering example : Z 00 / 12 / 10 x 25 Plate thickness Guiding Guiding length Z00/... 1.1 Locating guide pillar DIN 16761-A Z01/...* 1.9 (Angle pin) Mat.: Case hardening steel 720 HV 30 for actuating of slides Z 011/... 1.11 with two fits Mat.: Case hardening steel 720 HV 30 Z 012 /...* 1.12 62 ± 2 HRC for use with Z 12 /... Z 013 /...* 1.12 62 ± 2 HRC DIN 9825-2 for use with Z 12 /... Z 014 /... 1.13 Z 0141/... 1.14 End piece used with Z 014 /... Z 0151/... 1.16 Pillar adapter used with Z 015 /... Z 0152 /... 1.17 Locating pillar adapter Z02/... 1.18 Ejector rod Mat.: Case hardening steel 720 HV 30 for ejector assemblies Z 022 /...* 1.19 Guide sleeve Mat.: Free-cutting steel 620 HV 30 also used together with Z 56 /... and Z 561/... Z03/... 1.20 DIN 16761-B Z05/... 1.27 Locating unit, round Mat.: 1.2067/ 54 ± 2 HRC for interlocking of cavity plates Z 055 /... 1.28 Distance disc Mat.: 1.0715 / 50 ± 2 HRC for Z 05 /... and Z 06 /... Z08/... 1.30 Pre-centering unit Z 081/... 1.31 Distance disc Mat.: 1.2842 / Z 091/... 1.32 Square interlock male us. with Z 092 / Z 093 /... Z 092 /... 1.33 Square interlock female used with Z 091 /... Z 093 /... 1.33 Square interlock female used with Z 091 /... Z10/... 1.34 Locating guide bush DIN 16716-C Z10W/... 1.36 Locating guide bush Mat.: 2.0975 Z 0142 /... 1.14 Locating end piece used with Z 014 /... Z 056 /... 1.29 Disc Mat.: 1.0715 / 50 ± 2 HRC for Z 05 /... and Z 06 /... Z11/... 1.38 Guide bush DIN 16716-E Z 015 /... 1.15 Z06/... 1.29 Locating unit, flat 49 ± 2 HRC for interlocking of cavity plates Z11W/... 1.41 Guide bush Mat.: 2.0975 1.03
New product Z12/...* 1.43 Ball guide bush Mat.: 1.3505 / 62 ± 2 HRC used together with Z 012 /... or Z 013 /... Z13W/... 1.43 Guide bush, Mat.: 2.0975 used for guided ejector assemblies Z15W/... 1.44 Slide plate Mat.: 2.0492 used with Z 1540 /... Z16W/... 1.44 Guide rail Mat.: 2.0492 Z07/... 1.45 Square guide bar Mat.: 1.7131/ 580 + 40 HV 30 for centering of cavity plates Z17/... 1.46 Guide retainer Mat.: 1.7131/ 700 + 60 HV 30 used together with Z07/... Z 186 W/... 1.47 Guide rail Mat.: 2.0492 for Z 180 /... Z26/... 1.50 Dowel pin with ectraction thread DIN 7979 Z28/... 1.50 Hexagon nut DIN 934 Z 281/... 1.51 (V 5410 /...) Hexagon nut 1,5 d height DIN 6330 Z 282 /... 1.51 (V 5420 /...) Collar nut 1,5 d height DIN 6331 Z 285 /... 1.52 (V 5310 /...) Nut for T-slots DIN 508 Z 286 /... 1.52 (V 5325 /...) Nut for T-slots Rhombus type Z30/... 1.53 Hexagon socket head cap DIN EN ISO 4762 Z33/... 1.60 Countersunk socket head DIN EN 10642 Z34/... 1.60 Hexagon socket set with dog point Mat.: min. 1455 N/mm 2 DIN 915-45 H/ ISO 4028 Z35/... 1.61 Hexagon socket set with flat point Mat.: min. 1455 N/mm 2 DIN 913-45 H Z 351/... 1.61 Hexagon socket set Mat.: min. 1455 N/mm 2 DIN 913-45 H Z 352 /... 1.62 (V 5520 /...) Threaded stud DIN 6379 Z36/... 1.63 with head Z 361/... 1.63 with head Mat.: 1.4305 Z20/... 1.48 Centering sleeve DIN 16759 used together with Z 00 /... and Z 10 /... Z31/... 1.55 Hexagon socket head cap DIN EN ISO 4762 Z37/... 1.64 1.04 Z25/... 1.49 Dowel pin DIN 6325 Z32/... 1.59 Socket head cap with shallow head DIN 7984 Z 370 /... 1.64 with stud
Z 371/... 1.65 Mat.: 1.4305 Z48/...* 1.70 Date insert Z 4861/ 3 1.74 Day-marking insert Z 372 /... 1.65 Z 481/...* 1.70 Arrow-year insert for Z 48 /... Z 4861/4 1.75 Month-marking insert Z 3721/... 1.66 with plastics stud Z 482 /...* 1.71 Month-date insert Z 4861/ 5 1.75 Year-marking insert Z 373 /... 1.66, Z 374 /... 1.67 Mat.: 1.4305 Z 375 /... 1.67 Housing: Plastics Z 483 /...* 1.71 Year-date insert Z 484 /...* 1.72 Arrow insert Spare part for Z 482 /... and Z 483 /... Z 485 /...* 1.72 Date insert Z 4863 /... 1.76 Multiple marking inserts, 3-fold Days / Months / Years Z 4864 /... 1.76 Multiple marking inserts, 4-fold Mat.: 1.2343/ Days / Months / Years / Resin Z487/1/...* 1.77 Recycling insert Inscription conforming to DIN 6120 Z38/... 1.68 Shoulder Mat.: 12.9 ISO 7379 Z 381/... 1.69 (V 5128 /...) Shoulder Z 4851/...* 1.73 Arrow-year insert for produkt marking Spare part for Z 485 /... Z 4861/1 1.73 Resin-marking insert Z487/2/...* 1.78 Recycling insert Inscription conforming to DIN 6120 Z487/3/...* 1.79 Recycling insert Inscription conforming to DIN 6120 Z39/... 1.69 Slotted pan head Mat.: 4.8 DIN EN ISO 1580 for Hot-runner manifold block Z 106 Z 4861/ 2 1.74 Shift-marking insert Z 488 /... 1.80 CE-marking insert 1.05
New product Z 489 /... 1.80 Food-marking insert Z60/... 1.87 with round cross section DIN 2098-1 Z70/...* 1.100 Lifting device for moulds and diecastings dies Z49/... 1.81 Core pin with extracting thread Mat.: 1.2343/1370 N/mm 2 Z 601/... 1.89 DIN 2098-1 Length : 500 mm Z 701/...* 1.100 Distance bolt Mat.: 1.0501/900 N/mm 2 for Z 70 /... Z55/... 1.82 Seating washer Mat.: 1.2343/1370 N/mm 2 for ejector plates Z62/... 1.90 Disc spring DIN 2093 Z71/... 1.101 Lifting eye bolt Mat.: 1.0401 DIN 580 Tin-plated Z 551/... 1.82 Stop pin Mat.: 1.8159 / 46 ± 2 HRC Z64/... 1.94 with square cross section Z 711/... 1.101 Lifting eye bolt high strength Mat.: 1.6541 Z56/...* 1.83 Stop disc Mat.: 1.1730/690 N/mm 2 used with Z 02 /... and Z 022 /... Z65/... 1.94 with elongated cross section Z 712 /... 1.102 Eye nut Mat.: 1.0401 DIN 582 Tin-plated Z 561/...* 1.83 Washer Mat.: 1.0715/950 N/mm 2 used with Z 022 /... Z67/...* 1.95 External circlip DIN 471 Z72/... 1.102 Safety-eye bolt Mat.: 1.6758 Z 562 /... 1.84 (V 5250 /...) Washer Mat.: Tempered steel 1200 1400 N/mm 2 DIN 6340 Z57/... 1.85 Support pillar with thread and dowel hole Z68/...* 1.97 Internal circlip DIN 472 Z69/... 1.99 Spring washer for s Z 30 ; Z 31; Z 32 Z73/... 1.103 Tool safety device Z 741/... 1.104 (V 2510 /...) Power clamp low design Mat.: Prehadened steel 1.06 Z 571/... 1.86 Support pillar with clearance hole Z 691/... 1.99 Locking edge washer for s Z 30 ; Z 31; Z 32 Z 7411/... 1.104 (V 2516 /...) Spacer block Mat.: Aluminium
New product Z 7412 /... 1.105 (V 2518 /...) Spacer block Mat.: Aluminium Z 753 /... 1.111 (V 5210 /...) Spherical washer DIN 6319 K 100 /...* 1.122 for fixed mould half Z 742 /... 1.106 (V 2512 /...) Power clamp goose-neck design Mat.: Prehadened steel Z 743 /... 1.106 (V 2514 /...) Power clamp Mat.: Prehadened steel Z 754 /... 1.112 (V 5220 /...) Conical seat washer DIN 6319 Z 755 /... 1.112 (V 5230 /...) Conical seat washer DIN 6319 K 103 /...* 1.123 Mat.: 1.2735/1455 N/mm 2 for fixed mould half, may be maschined as sprue bushing K 500 /...* 1.124 for movable mould half Z75/... 1.107 Clamp system Z75/Typ/...1.107 Clamp height adjustable Z76/...* 1.113 Quick-action clamping jig used for injection moulds and diecasting dies Z 761/...* 1.113 Clamping plate for Z 76 /... K 503 /...* 1.125 Mat.: 1.2162 /62 + 2 HRC for movable mould half with guide hole K 505 /...* 1.126 Z 751/... 1.108 10.9 / 1000 N/mm 2 with hexagon nut Z 762 /...* 1.114 Clamping bolt 40 + 2 HRC for Z 76 /... Z 752 /... 1.109 (V 5505 /...) with nut and washer Z 763 /...* 1.114 Eccentric bolt Mat.: 1.2718 / 52 + 2 HRC for Z 76 /... Z 7521/... 1.110 (V 5510 /...) Mat.: 10.9 / 1000 N/mm 2 8.8 / 800 N/mm 2 DIN 787 Z 121/...* 1.115 Thermal insulating sheet Mat: Synthetic resin / glass fibre = 0,21 W/mK Z 7522 /... 1.111 (V 5511/...) Mat.: 12.9 / 1200 N/mm 2 DIN 787 Z 1211/...* 1.120 Thermal insulating sheet Mat: Synthetic resin / glass fibre = 0,13 W/mK 1.07