ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads A heavy duty ball thrust bearing takes all axial thrust Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant SKODA & STM HEAVY DUTY LIVE CENTERS Centre Maximum Morse Point Body Body Body Weight of SKODA STM Taper Angle Dia. (in) Dia. (in) Length (in) Work Piece Code No. Code No. 1 60 5 8 1-3 8 4-3 8 200 lb 310-105 320-105 2 60 7 8 1-1 2 5 600 lb 310-110 320-110 3 60 1-1 8 1-7 8 6-1 4 900 lb 310-115 320-115 4 60 1-1 2 2-3 16 7-1 2 1800 lb 310-120 320-120 5 60 1-3 4 2-3 4 9-1 2 3000 lb 310-125 320-125 6 60 2-3 8 3-1 2 12-3 4 7500 lb 310-130 320-130 PARTS FOR HEAVY DUTY LIVE CENTERS 10 11 PARTS FOR HEAVY DUTY LIVE CENTERS Morse 2-Point 3-Ring 4-Sleeve 5-End Plug 6-Seal 7-Roller Bearing Taper Code No. Code No. Code No. Code No. Code No. Code No. 2 310-205 310-210 310-215 310-220 310-225 310-230 3 310-305 310-310 310-315 310-320 310-325 310-330 4 310-405 310-410 310-415 310-420 310-425 310-430 5 310-505 310-510 310-515 310-520 310-525 310-530 6 310-605 310-610 310-615 310-620 310-625 310-630 PARTS FOR HEAVY DUTY LIVE CENTERS Morse 8-Thrust Bearing 9-Ball Bearing 10-Set Screw 11-Slot Screw 12-Ring Taper Code No. Code No. Code No. Code No. Code No. 2 310-235 310-240 310-245 310-250 310-255 3 310-335 310-340 310-345 310-350 310-355 4 310-435 310-440 310-445 310-450 310-455 5 310-535 310-540 310-545 310-550 310-555 6 310-635 310-640 310-645 310-650 310-655
SKODA LIVE CENTERS SKODA EXTRA HEAVY DUTY LIVE CENTERS - CSN 243325 For clamping of heavy workpieces at lathes. The rigid structure and seating of the turning part is characterized by long service life The model EXTRA is commonly used for work at grinding machines Centres with the apex angle of 60 for reduction of deformations of the machine (tailstock, bed, headstock) from axial clamping forces The live centres are provided with shanks according to DIN 228 and ISO 296 (without clamping thread) SKODA EXTRA HEAVY DUTY LIVE CENTERS Morse D d I L Load Weight Taper (in) (in) a (in) (in) (lb) (lb) Code No. 4 3.14 1.58 60 4.10 7.85 3300 5 310-920 5 3.54 1.65 60 5.60 9.48 5500 9 310-925 6 4.92 2.16 60 6.42 13.38 11000 27 310-930 7 5.70 2.56 60 7.80 15.25 17600 45 310-935 SPARE PARTS FOR EXTRA HEAVY DUTY LIVE CENTERS SPARE PARTS FOR EXTRA HEAVY Parts No. Description Code No. MT 4-02 90 Point 310-802 4-03 60 Point 310-803 4-04 Ring 310-804 4-05 End Plug 310-805 4-06 Sealing 310-806 4-07 Roller Bearing 310-807 4-08 Thrust Bearing 310-808 4-09 Radial Bearing 310-809 4-10 Lock Screw 310-810 4-11 Packing Piece 310-811 4-12 Packing Ring 310-812 4-13 Packing Ring 310-813 MT 5-02 90 Point 310-816 5-03 60 Point 310-817 5-04 Ring 310-818 5.05 End Plug 310-819 5.06 Sealing 310-820 5-07 Roller Bearing 310-821 5-08 Thrust Bearing 310-822 5-09 Radial Bearing 310-823 5-10 Lock Screw 310-824 5-11 Packing Piece 310-825 5-12 Packing Ring 310-826 5-13 Packing Ring 310-827 DUTY LIVE CENTERS Parts No. Description Code No. MT 6-02 90 Point 310-830 6-03 60 Point 310-831 6-04 Ring 310-832 6-05 End Plug 310-833 6-06 Sealing 310-834 6-07 Roller Bearing 310-835 6-08 Thrust Bearing 310-836 6-09 Radial Bearing 310-837 6-10 Lock Screw 310-838 6-11 Packing Piece 310-839 6-12 Packing Ring 310-840 6-13 Packing Ring 310-841
SKODA LIVE CENTERS SKODA PRECISION CNC LIVE CENTERS - CSN 243327-II The centres are intended for NC lathes. Their face parts are formed to allow easy access of the tool to the workpiece, which is an advantage with workpieces of complex shapes A special ring is used to set the radial clearance of the centre. It also prevents cutting lubricant from leaking into the centre bearing space, and so extends the operational life of the centre Spindle-like point extends into shank where it is supported by a needle bearing, increasing rigidity, reducing point deflection and dampening vibration SKODA PRECISION CNC LIVE CENTERS Morse D d L l Load Taper (in) (in) (in) (in) (lb) Code No. 2 1.5.695 5.25 2.65 1300 310-010 3 1.85.750 6.75 3.50 1550 310-015 4 2.20 1.125 8.15 3.95 4840 310-020 5 3.10 1.375 10.50 4.85 7750 310-025 SPARE PARTS FOR CNC LIVE CENTERS 11 10 SPARE PARTS FOR CNC LIVE CENTERS Parts No. Description Code No. MT 2-02 Point 310-855 2-03 Set Ring 310-856 2-04 Ring 310-857 2-05 End Plug 310-858 2-06 Packing Piece 310-859 2-07 Needle Bearing 310-860 2-08 Thrust Bearing 310-861 2-09 Radial Bearing 310-862 2-10 Countersink Screw 310-863 2-11 Lock Screw 310-864 2-12 Snap Ring 310-865 MT 3-02 Point 310-869 3-03 Set Ring 310-870 3-04 Ring 310-871 3-05 End Plug 310-872 3-06 Packing Piece 310-873 3-07 Needle Bearing 310-874 3-08 Thrust Bearing 310-875 3-09 Radial Bearing 310-876 3-10 Countersink Screw 310-877 3-11 Lock Screw 310-878 3-12 Snap Ring 310-879 Parts No. Description Code No. MT 4-02 Point 310-882 4-03 Set Ring 310-883 4-04 Ring 310-884 4-05 End Plug 310-885 4-06 Packing Piece 310-886 4-07 Needle Bearing 310-887 4-08 Thrust Bearing 310-888 4-09 Radial Bearing 310-889 4-10 Countersink Screw 310-890 4-11 Lock Screw 310-891 4-12 Snap Ring 310-892 MT 5-02 Point 310-895 5-03 Set Ring 310-896 5-04 Ring 310-897 5-05 End Plug 310-898 5-06 Packing Piece 310-899 5-07 Needle Bearing 310-900 5-08 Thrust Bearing 310-901 5-09 Radial Bearing 310-902 5-10 Countersink Screw 310-903 5-11 Lock Screw 310-904 5-12 Snap Ring 310-905
SKODA LIVE CENTERS SKODA EXTENDED POINTS LIVE CENTERS - CSN 243328 Designed to keep dust, chips and coolant from coming inside the bearings Hardened and ground to 61-65 Rockwell Concentricity within.0002" SKODA EXTENDED POINTS LIVE CENTERS D d L l Load Weight Point MT (in) (in) (in) (kg) (lb) (lb) Angle Code No. Price $ 2 1.417.866 5.059 2.560 594.79 60 310-160 101.50 3 1.850 1.181 6.575 3.386 704 1.85 60 310-165 121.10 4 2.165 1.378 8.169 4.094 2200 3.19 60 310-170 151.70 5 2.736 1.772 10.197 5.078 3960 7.04 60 310-175 210.35 6 3.504 2.362 13.425 6.319 12600 17.05 60 310-180 370.35 SKODA HEAVY DUTY BULL NOSE LIVE CENTERS - CSN 243319 Designed to hold pipe and hollow work. Pipe head can be used as an all-round centre for light work. Two matched angular contact bearings preloaded at the factory. This achieves good thrust and radial capacities. Bearings are protected by a combination steel shield and neoprene seal. Accuracy: ±0.0001" SKODA HEAVY DUTY BULL NOSE LIVE CENTERS D d L l Load Weight MT a (in) (in) (in) (kg) (lb) (lb) Code No. Price $ 3 60 3.150 1.378 6.380 3.189 880 4.62 310-140 403.70 4 60 4.527 1.732 7.637 3.622 2860 9.68 310-145 650.95 5 60 5.314 1.811 9.449 4.331 4400 17.60 310-150 877.00 6 60 6.693 2.520 12.125 4.961 8800 51.70 310-155 2030.25
SKODA LIVE CENTERS SKODA LIVE CENTER SETS - CSN 243326 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads A heavy duty ball thrust bearing takes all axial thrust Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant SKODA LIVE CENTER SETS Morse A B-G A B C D E F G Taper d l L L D D1 D D1 D D1 D D1 D2 D D1 D2 D D1 D Code No. 3.590.984 1.968 1.771.787.019 1.417.236 2.480 1.299 1.417 1.102.472 1.771 1.496.866.787.098.984 310-705 4.784 1.181 2.362 2.086.984.019 1.771.393 2.755 1.378 1.771 1.456.669 2.480 2.086 1.181.984.196 1.259 310-710 5.984 1.496 2.874 2.559 1.259.039 2.204.551 3.149 1.496 2.204 1.732.787 2.775 2.362 1.417 1.259.196 1.771 310-715 6 1.181 1.811 3.543 3.149 1.417.039 2.755.708 3.937 1.968 2.755 2.283.950 3.937 3.464 2.126 1.417.315 2.204 310-720 Morse Part A Part B Part C Part D Part E Part F Part G Taper Code No. Code No. Code No. Code No. Code No. Code No. Code No. 3 310-724 310-726 310-728 310-730 310-732 310-734 310-736 4 310-744 310-746 310-748 310-750 310-752 310-754 310-756 5 310-764 310-766 310-768 310-770 310-772 310-774 310-776 6 310-784 310-786 310-788 310-790 310-792 310-794 310-796 ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETS ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETS Morse Live Centre Only Wooden Case Drift Key Taper Code No. Code No. Code 3 310-722 310-738 310-740 4 310-742 310-758 310-760 5 310-762 310-778 310-780 6 310-782 310-798 310-800
BORING & FACING HEADS 9
NAREX BORING AND FACING HEADS UNIVERSAL BORING AND FACING MASTERHEAD Solve ALL Your Boring and Facing Problems All models available in metric UNIVERSAL BORING AND FACING MASTERHEAD Model No. VHU-36 VHU-56 VHU-80 VHU-125 VHU-160 Code No. 300-007 300-055 300-105 300-155 300-205 Metric Set Code No. 300-008 300-056 300-106 300-156 300-206 QUICK RETURN MOVEMENT QUICK RETURN ADJUSTMENT THROUGH SLIDE SETTING SCREW Operating Accuracy ±.0002 ±.0002 ±.0002 ±.0002 ±.0002 Boring and facing range from 0 up to 9 13 16 24 31 Max. adjustability of slide 1.375 2.125 3.125 4.875 5.750 Max. dia. of slide 2.750 4.250 6.250 9.750 11.500.002.002.002.002 Various automatic slide.0016.004.004.004.004 feeds per revolution.0032.006.006.006.006.0048.008.008.008.008 1 graduation of sensitive.0005.0005.0005.0005.0005 adjustments ins. on dia. 1 Revolution of sensitive adjustment.016.016.016.016.016 Quick return per revolution.030.120.120.160.160 Diameter of tool post holes in slide 5 8 1 1 1-1 4 1-1 4 Height of Head without shank 3.125 4.350 4.350 5.000 5.000 Width of Head 2.875 4.500 5.500 7.000 8.725 Weight of head without shank 4 lb 12 lb 16 lb 26.6 lb 31 lb Accessories 300-003 300-053 300-104 300-153 300-202 Head only 300-004 300-054 300-103 300-154 300-203 Case only 300-006 300-052 300-102 300-204 300-204 Shank M.T. 2 300-010 Shank M.T. 3 300-015 Shank M.T. 4 300-020 300-060 300-110 Shank M.T. 5 300-115 300-115 300-115 300-115 Shank M.T. 6 300-165 300-165 300-165 Shank ISA - 30 300-025 Shank ISA - 40 300-030 300-070 300-070 Shank ISA - 50 300-075 300-075 300-075 300-075 Shank R - 8 300-035 300-080 Shank Straight 3/4 300-039 Shank Straight 1 300-040 Shank Cat - 40 300-033 300-073 Shank Cat - 50 300-076 300-076 300-076 300-076 Shank BT - 40 300-034 300-074 Shank BT - 50 300-077 300-077 300-077 300-077 Tang M.T. 2 300-245 Tang M.T. 3 300-250 Tang M.T. 4 300-255 300-255 300-255 Tang M.T. 5 300-260 300-260 300-260 300-260 Tang M.T. 6 300-265 300-265 300-265 STANDARD EQUIPMENT SUPPLIED WITH THE MASTER HEAD IN CASE Boring bars 3 8 2 pcs. 1 x 4 1 x 4 1-1 4 x 6 1-1 4 x 6 Boring bars 5 8 2 pcs. 1 x 6 1 x 6 1-1 4 x 9-3 4 1-1 4 x 9-3 4 Boring bar holders *1 x 5-1 2 *1 x 5-1 2 *1-1 4 x 6-5 16 *1-1 4 x 6-5 16 *2 pcs. *2 pcs. *2 pcs. *2 pcs. Extension holder 5 8 x 3-7 8 1 x 6-7 8 1 x 6-5 8 1-1 4 x 11-13 16 1-1 4 x 11-13 16 Complete set of reinforcing rings 5 8 1 1 1-1 4 1-1 4 Carbide round tool bits *5 8 *1 *1 *1-1 4 *1-1 4 *4 pcs. *4 pcs. *4 pcs. *4 pcs. HSS square tool bits *5 16 x 1-3 16 *5 16 x 1-3 16 *3 8 x 1-13 32 *3 8 x 1-13 32 *4 pcs. *4 pcs. *4 pcs. *4 pcs. Reducing sleeve 5 8 x 3 8 1 x 3 4 1 x 3 4 1-1 4 x 3 4 1-1 4 x 3 4 Reducing sleeve 1 x 5 8 1 x 5 8 1-1 4 x 5 8 1-1 4 x 5 8
NAREX BORING AND FACING HEADS Principal Component Part of Head Vhu-36 1. Braking ring 2. Engaging ring 3. Control ring 4. Scale 5. Slide 6. Setting screw 7. Holes for tools 8. Clamping screws 9. Screw for locking slide in position 10. Stop dog 11. Stop dog pin 12. Knob for rapid traverse control (only in Vhu 1-1/4) 13. Lubricator 14. Screw for clutch adjustment 15. Clutch 16. Retaining rod Basic machining operations shown for the Vhu type universal boring heads: 1. Boring of holes 2. Spotfacing of small end large-diameter end faces 3. Recessing inside holes 4. Recessing on surfaces of parts 5. Free recessing 6. External diameter machining 7. Boring of tapered holes 8. External machining of taper 9. Facing of rear end faces 10. Thread cutting
NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 VHU 36
NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 CONTINUED
NAREX BORING AND FACING HEADS NAREX BORING AND FACING HEAD PARTS New Part Description pcs Part No. pcs Part No. pcs Part No Sowa Code Sowa Code Sowa Code VHU Model No. VHU 36 (1-3/8) VHU 56 (2-1/8) VHU 125 (4-7/8) New I.D. No. VHU 80 (3-1/8) VHU 160 (6-1/4) 1 Cap Screw 4 #70-300-770 4 #88-300-588 4 #88-300-588 2 Ring 1 #2-300-702 1 #3-300-503 1 #3-300-603 3 Pin 1 #36-300-736 1 #51-300-551 1 #55-300-655 4 Flange (Hold-Ring) 1 #71-300-771 1 #80-300-480(vhu-56) 1 #91-300-691 1 #91-300-591(vhu-80) 5 Clutch Pin (Safety pin) 1 #26-300-726 1 #5-300-505 1 #5-300-605 6 Hold Ring (Brake ring) 1 #3-300-703 1 #4-300-504 1 #4-300-604 7 Set Ring 1 #4-300-704 1 #6-300-506 1 #6-300-606 8 Pin 2 #36-300-736 2 #54-300-554 2 #58-300-658 9 Ring (Control Ring) 1 #5-300-705 1 #7-300-507 1 #7-300-607 10 Spring 2 #20-300-720 1 #40-300-540 1 #40-300-640 11 Spring 6 #7-300-707 8 #11-300-511 8 #11-300-611 12 Pin 6 #8-300-708 8 #9-300-509 8 #9-300-609 13 Cap Screw 1 #64-300-764 1 #46-300-546 1 #50-300-650 14 Cover (Lid) 1 #16-300-716 1 #18-300-518 1 #18-300-618 15 Washer 1 #65-300-765 1 #41-300-541 1 #46-300-646 16 Star Gear (Ratchet Wheel) 1 #15-300-715 1 #20-300-520 1 #20-300-620 17 Washer (Ring) 1 #18-300-718 1 #22-300-522 1 #22-300-622 18 Slideguide 1 #10-300-710 1 #13-300-413(vhu-56) 1 #13-300-613 1 #13-300-513(vhu-80) 19 Screw - - 1 #77-300-577 1 #53-300-653 20 Spring - - 1 #36-300-536 1 #70-300-670 21 Brake - - 1 #21-300-521 1 #21-300-621 22 Washer (Ring) 2 #22-300-722 2 #25-300-525 2 #25-300-625 23 Pin 2 #69-300-769 2 #51-300-551 2 #55-300-655 24 Stop Screw 2 #39-300-739 4 #49-300-549 4 #44-300-644 25 Stop (Dog) - L.H. Stop 2 #28-300-728 1 #15-300-515 1 #15-300-615 26 Stop Nut (Insert) 2 #42-300-742 2 #14-300-514 2 #14-300-614 27 Slide 1 #13-300-713 1 #2-300-402(vhu-56) 1 #2-300-602 1 #2-300-502(vhu-80) 1 #80-300-680 28 Pin (Bar) 1 #47-300-747 1 #24-300-524 1 #24-300-624 29 Spring 1 #46-300-746 1 #70-300-570 1 #70-300-670 30 Set Screw 1 #74-300-774 1 #8-300-508 1 #71-300-671 31 Set Screw 3 #35-300-735 3 #68-300-568 3 #74-300-674 5 #74-300-674 32 Set Screw 3 #41-300-741 3 #67-300-567 3 #73-300-673 5 #73-300-673 33 Ball 3 #75-300-775 3 #58-300-558 3 #61-300-661 34 Worm Rod (Screw) 1 #12-300-712 1 #23-300-423(vhu-56) 1 #23-300-623 1 #23-300-523(vhu-80) 1 #92-300-692 35 Washer (Distance Ring) - Spacer 1 #27-300-727 1 #37-300-537 1 #37-300-637 36 Pin 2 #77-300-777 2 #53-300-553 2 #57-300-657 37 End Stop (Back Bearing) 1 #17-300-717 1 #38-300-538 1 #38-300-638 38 End Screw 2 #76-300-776 2 #43-300-543 2 #48-300-648 39 Stop (Dog) - R.H. Stop - - 1 #16-300-516 1 #16-300-616 40 Gear Ring 2 #21-300-721 2 #26-300-526 2 #26-300-626 41 Spindle (Worm) 1 #9-300-709 1 #12-300-512 1 #12-300-612 42 Worm Gear (Worm Wheel) 1 #23-300-723 1 #17-300-417 1 #17-300-617 43 Pin (Parallel Key) 1 #66-300-766 1 #19-300-519 1 #19-300-619 44 Head Nut 3 #49-300-749 3 #72-300-572 4 #47-300-647 45 Head Screw 3 #48-300-748 3 #45-300-545 4 #49-300-649 47 Ring (Control Ring) 1 #6-300-706 1 #10-300-510 1 #10-300-610
NAREX BORING AND FACING HEADS NAREX BORING AND FACING HEAD PARTS New Part Description pcs Part No. pcs Part No. pcs Part No Sowa Code Sowa Code Sowa Code VHU Model No. VHU 36 (1-3/8) VHU 56 (2-1/8) VHU 125 (4-7/8) New I.D. No VHU 80 (3-1/8) VHU 160 (6-1/4) 48 Pin 2 #38-300-738 2 #56-300-556 2 #59-300-659 49 Ball 2 #44-300-744 2 #58-300-558 2 #61-300-661 50 Stop Rod (Bar) 1 #34-300-734 1 #35-300-535 1 #35-300-635 51 Knob (Ball) - - - 1 #59-300-559 1 #62-300-662 52 Screw 1 #63-300-763 1 #47-300-547 1 #51-300-651 53 Spring 1 #24-300-724 1 #29-300-529 1 #29-300-629 54 Pin Point 1 #25-300-725 1 #30-300-530 1 #30-300-630 55 Ball 1 #51-300-751 - - - - - - 56 Cap Screw 1 #40-300-740 - - - - - - 57 Pin 1 #32-300-732 - - - - - - 58 Ball (Brake) 1 #19-300-719 - - - - - - 59 Pin 1 #59-300-779 - - - - - - 60 Cap Screw 6 #70-300-770 6 #81-300-481(vhu-56) 6 #89-300-689 6 #89-300-589(vhu-80) 61 Pin 1 #78-300-778 - - - - - - 62 Plug 2 #45-300-780 2 #57-300-592 2 #60-300-694 63 Ring Clip (Circlip) 1 #50-300-750 1 #60-300-560 1 #63-300-663 64 Parallel key - - - 4 #87-300-587 4 #87-300-687 65 Screw - - - 4 #90-300-590 4 #90-300-690 66 Pin 1 #14-300-781 1 #55-300-593 1 #42-300-695 67 Set Screw 2 #41-300-741 2 #67-300-567 2 #73-300-673 68 Screw - - - 2 #48-300-548 2 #52-300-652 69 Pin 1 #37-300-782 1 #69-300-594 1 #45-300-696 101 Boring tool 5x3/8"x60 1 #54-300-754 - - - - - - 102 Boring tool 13x5/8"x90 1 #52-300-752 - - - - - - 103 Internal corner tool 5x3/8"x60 1 #55-300-755 - - - - - - 104 Internal corner tool 13x5/8"x90 1 #53-300-753 - - - - - - 105 Right hand tool S20 1 #59-300-759 1 #65-300-565 1 #68-300-668 106 Right hand tool H10 1 #58-300-758 1 #75-300-575 1 #77-300-677 107 Left hand tool S20 1 #57-300-757 1 #66-300-566 1 #66-300-666 108 Left hand tool H10 1 #56-300-756 1 #76-300-576 1 #76-300-676 109 Tool HSS - - - 2 #64-300-564 2 #67-300-667 110 Tool S20 - - - 2 #63-300-563 2 #69-300-669 111 Extension (Boring bar) - - - 1 #28-300-528 1 #28-300-628 112 Extension (Boring bar) - - - 1 #27-300-527 1 #27-300-627 113 Toolholder (Holder with screw) - - - 2 L=160 #34-300-534 2 #34-300-634 2 L=185 #34-300-534 - - - 114 Toolholder (Holder with screw) 1 #31-300-731 1 L=195 #33-300-533 1 L=350 #33-300-633 1 L=220 #33-300-533 1 L=385 #33-300-633 115 Collar Set (Set of spacing tubes) 1 #30-300-730 1 #32-300-532 1 #32-300-632 116 Reducer (Reduction sleeve) 1 #33-300-733 1 #42-300-542 1 #41-300-641 117 Reducer (Reduction sleeve) - - 1 #44-300-544 1 #8-300-608 118Allen (Hexagon) Wrench "NAREX" 1 #73-300-773 - - - 119 Allen (Hexagon) Wrench 4 1 #60-300-760 1 #61-300-561 1 #64-300-664 120 Hexagon wrench 6 - - 1 #62-300-562 1 #65-300-665 121 Washer 1 #29-300-729 1 #31-300-531 1 #31-300-631 122 Hex Screw 1 #43-300-743 1 #50-300-550 1 #54-300-654 27P Slide-set consists of parts: 27+36+37+38+28+29+30+31+32 34P Screw-set consists of parts: 34+42+40+22+35+23 42P Worm wheel-set consists of: 42+40+22+23
ALSO FROM SOWA Value + European Engineering and Design Supplied with nationally traceable calibration certificates 12 + 12 Care Warranty Program Call today for your catalog For more details visit us at: www.asimeto.com
CALL FOR YOUR CATALOG TODAY
BALANCED ROTARY TOOLING 40 TAPER TO 20,000 RPM 50 TAPER TO 15,000 RPM MODULAR AND MACHINE VISES MEETING TODAYS DEMAND OF INCREASED SPEED AND SPINDLE LIFE CALL TODAY FOR YOUR GS CATALOG TODAY Distributed By: TOOL & MACHINE CO. LTD. 500 Manitou Drive Kitchener, Ontario N2G 4B6 Toll Free: 1-800-265-8221 Phone: (519) 748-5750 Fax: (519) 748-9304 Email: sales@sowatool.com web: www.sowatool.com ISO 9001 USAC08 Printed in Canada