MANUFACTURER OF PRECISION MACHINED PARTS AND ASSEMBLIES www.steuby.com
John Steuby- Founder John J. Steuby Company, founded in 1962, is a family owned and operated manufacturing company, specializing in precision machined metal products for the Automotive, Aerospace, Appliance, Bearing, Defense, Medical, Ordinance, Oil & Gas, Power Generation, Energy, Hydraulic, Plumbing, Hardware, Commercial Fitting industries. John J. Steuby Company is one of the largest and most diversified plants in the Midwest. Over 100 employees, running two shifts and hundreds of precision manufacturing machines make the company a high volume, high quality leader in the industry. Our central U.S. location is ideal for receiving raw material and shipping finished product to every major area of the country. In our 144,000 square foot facility, we have the capacity to produce any product you require whether it be a long, medium or short run at a highly competitive price. Because we have extensive capabilities, we can produce difficult items made out of almost any material in small or large quantities. INDUSTRIES SERVED Hazelwood, MO 144,000 sq. ft. facility Automotive, Aerospace, Bearing, Defense, Medical, Ordinance, Oil & Gas, Power Generation, Energy, Hydraulic, Hardware, Commercial Fitting and General Industry
CAPABILITIES HYDROMATS SCREW MACHINES CNC SWISS Hydromat rotary transfer machines manufacture complex parts in large quantities for numerous market segments: appliance, plumbing, defense, automotive and aerospace applications. These rotary transfer machines have live tooling capabilities and are fitted with up to 16 machining stations. With our Hydromats, parts can be inverted to allow for rotary transfer machining operations on both ends during the production process. The Davenport Machine is designed for high volume low cost production. Quantities produced range from 1,000 to millions of pieces, though most quantities run are between 10,000 and 1,000,000 pieces. We have 27 Davenports with a full compliment of all attachments such as spindle stopping, cross drilling, tapping, milling, flat generating attachment, etc. Also we have two servo machines with back drilling and back tapping. CNC Swiss operates by feeding the stock through a guide bushing which means the OD turning tools can always cut the stock near the bushing (near the point of support). CNC Swiss type lathe is advantageous on long, slender parts, parts with extremely tight tolerances, complex parts, and parts made from difficult to machine materials. Our CNC Swiss department has 32mm, 20mm and 16mm CNC Citizen machines all with bar loaders.
ASSEMBLY Product assembly or progressive assembly takes parts (usually interchangeable parts) that are then added as the semi-finished assembly moves from workstation to workstation where the parts are added in sequence until the final assembly is produced. By mechanically moving the parts to the assembly work and moving the semi-finished assembly from work station to work station, a finished product can be assembled faster and with less labor. SECONDARY OPERATIONS Some complex components have features that require secondary operations. We have a small section of rotary transfer, presses, single spindle machines, mills, broaches, and machining centers to produce features that are not possible on our multi-spindle machines. Some secondary operations are: Cross Hole Drilling, Threading, Broaching, Pressing, Marking, Sub-Assembly, Milling & Slot Milling PLASTIC INJECTION MOLDING The principal advantage of injection molding is the ability to scale production en masse. Once the initial costs have been paid the price per unit during injection molded manufacturing is extremely low. Material for the part is fed into a heated barrel, mixed (Using a helical shaped screw), and injected (Forced) into a mold cavity, where it cools and hardens to the configuration of the cavity.
SUPPORT ENGINERING Our engineering, machining, assembly, electronics expertise and product development experience allows us to partner with our customers to select the best material and production methods to ensure performance & reduce cost. EDM Electrical Discharge Machining (EDM), is a manufacturing process whereby a desired shape is obtained by using electrical discharges (sparks). Our wire EDM capabilities allow us to produce tooling in-house, reducing lead time & eliminating down time. ISO 9001:2015 QUALITY ASSURANCE Quality Assurance is the systematic measurement, comparison with a standard, monitoring of processes and an associated feedback loop that confers error prevention. PROTOTYPING The company has amassed a significant knowledge base for effectively machining odd shapes and materials, including hightemperature alloys, titanium, and, plastics.
PRODUCTS Quick Disconnect Contract Manufacturing Can Openers Brass Street Elbows Straight Through Couplers Schrader Coupler & Plugs Blow Guns Swivel Steel Connectors
John J. Steuby Company 6002 N. Lindbergh Hazelwood, MO 63042 Office: 314.895.1000 www.steuby.com info@steuby.com