SFP Optical Transceiver Product Features SONET OC-1 / STM-4 39 SFP 16 km DWDM SFP for SMF @.6Gbps 1GHz (C-Band) DFB+APD Laser 16 km SFP C - 7 C Temperature - Extended/Industrial Available -Wire Interface Digital Diagnostic Monitoring (SFF-874) Hot-swappable for SFP LC ports OptoSpan 1 year standard warranty Description Datasheet Use with Finisar, Avago, JDSU & networks not requiring OEM compatibility SFP MSA / IEEE Std 8.3 RoHS compliant * For OEM Compatibility, use Platinum Series Part# PSFP-6DXXK16 Applications Optical Fast Ethernet SONET/SDH SONET OC-1 Other Optical Links Optical Budget Calculation for 16 km SFP Optical Transceiver SFP-6-K16DXX OptoSpan SFP-6-K16DXX is a DWDM SONET OC-1 / STM-4 SFP transceiver designed for long distance optical communications up to 16 km with signaling rates up to.6gbps. OptoSpan 6Mb DWDM optical transceivers are compatible with many brands such as Finisar, Avago, JDSU and network environments that do not require any special compatibility. For networks that require special OEM compatibility, such as CISCO, BROCADE, JUNIPER, ALCATEL, HP, NORTEL, EMC, QLOGIC and other OEMs, consider OptoSpan Platinum OEM Series transceiver model# PSFP-6DXXK16. All OptoSpan long-reach SFP s are ROHS compliant, allow for real-time diagnostic monitoring as per SFF-847 and designed to meet Multi-Source Agreement (MSA) standards for DWDM transceivers with LC interface. SFP-6-K16DXX Distance: 16 km Fiber: 1GHz (C-Band) SMF Tx Min Tx Max Rx Min Rx Max Link Attenuation Power Budget Product Specifications 7-37 -1 Optical Calculation Results -36.8-31.8 38.8 39 OptoSpan.com (sales@optospan.com) Page 1 RE:</7/15>
General Specifications Parameter Unit Min. Typ. Max Maximum Supply oltage Storage Temperature Case Operating Temperature Supply oltage Supply Current Absolute Maximum Ratings ºC ºC Transmitter -.5 Data Rate Gbps.6 Parameter Unit Min. Typ. Max -4 Recommended Operating Condition Electrical Characteristics 3.15 3.3 3.6 +85 +75 3.45 ma 3 Differential Input oltage Swing mpp 4 Input Differential Impedance ohm 85 1 115 Transmit Disable oltage - High cc Transmit Disable oltage - Low.8 Transmit Fault oltage - High cc Transmit Fault oltage - Low.8 Receiver Differential Output oltage Swing mpp 37 Differential Output Impedance ohms 85 1 115 LOS Output oltage - High cc LOS Output oltage - Low.8 OptoSpan.com (sales@optospan.com) Page RE:</7/15>
Optical Characteristics Parameter Unit Min. Typ. Max Transmitter Output Optical Power 7 Optical Extinction Ratio 8. Optical Wavelength nm 158 1564 Spectral Width nm.3 Side Mode Suppression Ratio 3 Receiver Optical Center Wavelength nm 158 1664 Receiver Sensitivity @.6Gbps -37-1 LOS DE-Assert -38 LOS Assert -45 Laser Safety This is a class 1 Laser Product according to IEC 685-1:1993:+A1:1997+A:1. This product complies with 1 CFR 14.1 and 14 except for deviations pursuant to Laser Notice No. 5, dated July 6, 1. OptoSpan.com (sales@optospan.com) Page 3 RE:</7/15>
PIN Layout OptoSpan.com (sales@optospan.com) Page 4 RE:</7/15>
PIN Functions Pin # Name - Description 1 Transmitter Ground Transmitter Fault Indication 3 Transmitter Disable 4 Module Definition 5 Module Definition 1 6 Module Definition 7 Not Connect 8 Loss of Signal 9 Receiver Ground 1 Receiver Ground 11 Receiver Ground 1 Inv. Received Data Out 13 Received Data Out 14 Receiver Ground 15 Receiver Power 16 Transmitter Power 17 Transmitter Ground 18 Transmit Data In 19 Inv. Transmit Data In Transmitter Ground 1 3 4 5 6 7 8 9 3 OptoSpan.com (sales@optospan.com) Page 5 RE:</7/15>
Mechanical Layouts OptoSpan reserves the right to make changes or to discontinue any optical product or service without any notice. Applications and features described herein are for illustrative purposes only. OptoSpan makes no representation of warranty that such applications or features will be suitable for any specific use or compatibility without further testing or modifications. Not responsible for typographical errors. OptoSpan.com (sales@optospan.com) Page 6 RE:</7/15>